I just got the OTA update to 11.2.A.0.31 ( I am on 11.2.A.0.21 CE version) and I downloaded it, pressed to install and then my phone shuts down, starts installing and after that the phone reboots and I get a notification say "could not install new software version. try again "
Does anyone know why that is?
Has it happened to any of you guys?
Thanks!
P.S- It's kinda weird when it installs because I keep getting black screens after it goes trough the steps and I'm pretty sure that it should not do that...
layup23 said:
I just got the OTA update to 11.2.A.0.31 ( I am on 11.2.A.0.21 CE version) and I downloaded it, pressed to install and then my phone shuts down, starts installing and after that the phone reboots and I get a notification say "could not install new software version. try again "
Does anyone know why that is?
Has it happened to any of you guys?
Thanks!
P.S- It's kinda weird when it installs because I keep getting black screens after it goes trough the steps and I'm pretty sure that it should not do that...
Click to expand...
Click to collapse
Yes, it happened to be because I swapped the internal memory with the SD card.
andrelessa said:
Yes, it happened to be because I swapped the internal memory with the SD card.
Click to expand...
Click to collapse
Ok I get that, but I did not do that.
I have the normal settings, I haven't made any changes to the vold.fstab .
So I'm guessing that's not why I get the error.
layup23 said:
Ok I get that, but I did not do that.
I have the normal settings, I haven't made any changes to the vold.fstab .
So I'm guessing that's not why I get the error.
Click to expand...
Click to collapse
And what about other changes do the system?
andrelessa said:
And what about other changes do the system?
Click to expand...
Click to collapse
Just found out it's not just me. Someone else has the same problem.
But anyway I flashed back to ICS, rooted and saw that I have an OTA update straight to .31 version and it worked .
So I don't know what the problem was but I found a way around it.
Same problem in Xperia Z
layup23 said:
I just got the OTA update to 11.2.A.0.31 ( I am on 11.2.A.0.21 CE version) and I downloaded it, pressed to install and then my phone shuts down, starts installing and after that the phone reboots and I get a notification say "could not install new software version. try again "
Does anyone know why that is?
Has it happened to any of you guys?
Thanks!
P.S- It's kinda weird when it installs because I keep getting black screens after it goes trough the steps and I'm pretty sure that it should not do that...
Click to expand...
Click to collapse
The same thing is happening to my Xperia Z (C6602). The phone is not rooted. Any other alternatives for OTA other than PCC or SUS or flashtool? Or can anyone tell me why this is happening?
KS Lin said:
The same thing is happening to my Xperia Z (C6602). The phone is not rooted. Any other alternatives for OTA other than PCC or SUS or flashtool? Or can anyone tell me why this is happening?
Click to expand...
Click to collapse
Why u want to use other alternatives? Use flashtool man!
Sent from my Xperia J using xda premium
2010matej said:
Why u want to use other alternatives? Use flashtool man!
Sent from my Xperia J using xda premium
Click to expand...
Click to collapse
Normally, I would use flashtool, but the max internet speed at my current location is only 40 KB/s. It would take a long time to download the ftf file, which it's over 700 MB.
Sent from my C6602 using xda app-developers app
KS Lin said:
Normally, I would use flashtool, but the max internet speed at my current location is only 40 KB/s. It would take a long time to download the ftf file, which it's over 700 MB.
Sent from my C6602 using xda app-developers app
Click to expand...
Click to collapse
In all alternatives you must have internet connection to download update man I know that felling (when I'm on Holidays,and there's new update or new cm10)
2010matej said:
In all alternatives you must have internet connection to download update man I know that felling (when I'm on Holidays,and there's new update or new cm10)
Click to expand...
Click to collapse
I can download up to 200 MB here. Only if the OTA update had worked....
Sent from my C6602 using xda app-developers app
KS Lin said:
I can download up to 200 MB here. Only if the OTA update had worked....
Sent from my C6602 using xda app-developers app
Click to expand...
Click to collapse
OTA update download file is smaller then 200MB for xz???
2010matej said:
OTA update download file is smaller then 200MB for xz???
Click to expand...
Click to collapse
Yeah. It's only 177 MB.
Sent from my C6602 using xda app-developers app
i also have the same problem with xperia j bt the version is different..
canu help me
i have 11.0.a.3.18 update to 11.2.a.0.31
OTS problem
i have no the solution, but i know what the problem is...it is because your xperia has bootloader UNLOCKED...i have the same problem, but i cant locked again...anyone how can? thnx
One more option is that you can flash ftf using flashtool! hope it help you!
Sent from my ST26i using xda app-developers app
Related
Tutorial root xperia miro on firmware 11.0.A.5.5
i was used this method and it's work,
1. Must be root first on 11.0.A.1.0 firmware
2. The phone must be on 11.0.A.1.0 rooted
3. Download the root file on http://www.mediafire.com/?mjm8iuf4c5fr77q
4. Extract on Empty folder (up to you where's you like to put the folder)
5. Open file "01-local-prop" from the extract the follow the steps
6. After finished, turn off the phone and then flash to 11.0.A.5.5 Firmware
Warning
- If you are use SEUS, don't take "Factory Reset", just update the firmware.
- If you are use Flashtool, don't mark the "Wipe Data", just mark the "Wipe Cache" and wait till the flashing process is done.
7. Run the file "02-push-root-files" on the extracted folder then follow the steps.
Done... Your phone has been rooted to 11.0.A.5.5 Firmware. Don't forget to update the Superuser on Google Playstore. After updating the Superuser, update the Binary file on the superuser app so you can allow app access on the superuser.
if you looking for ftf file xperia miro,please visit >> http://forum.xda-developers.com/showthread.php?p=34272400&postcount=2
Great, why you don't post in development section?
Sent from my ST23i using xda app-developers app
wow..many thanks..
Will it work on tipo?
Confirmed works on Tipo too
ariw182 said:
Great, why you don't post in development section?
Sent from my ST23i using xda app-developers app
Click to expand...
Click to collapse
smokerman said:
wow..many thanks..
Click to expand...
Click to collapse
your welcom ^_^
drummer1839 said:
Will it work on tipo?
Confirmed works on Tipo too
Click to expand...
Click to collapse
i think this method can use to all xperia on ics,with new firmware,because i try it on my Xperia active and LWW , its work,
messmeww said:
i think this method can use to all xperia on ics,with new firmware,because i try it on my Xperia active and LWW , its work,
Click to expand...
Click to collapse
True, this would work on all Xperia phones (or atleast the 2012 series range).
But kinda think u should change the title a bit, as this is not ON .5.5, but practically before.
I like this method, it's cool that it works like this but still, hope there will be another methods soon, a simpler one, hopefully a one-click-root method when a new bug/glitch is found in the Xperia 2012 phones. Without having to (down/up)grade a few times to make it work.
Dragoboss said:
True, this would work on all Xperia phones (or atleast the 2012 series range).
But kinda think u should change the title a bit, as this is not ON .5.5, but practically before.
I like this method, it's cool that it works like this but still, hope there will be another methods soon, a simpler one, hopefully a one-click-root method when a new bug/glitch is found in the Xperia 2012 phones. Without having to (down/up)grade a few times to make it work.
Click to expand...
Click to collapse
oke thank for your suggestion,i hope there will be another methods more simply
ow i'm a newbie,how to change the title??
messmeww said:
oke thank for your suggestion,i hope there will be another methods more simply
ow i'm a newbie,how to change the title??
Click to expand...
Click to collapse
Try the "Edit" button on ur first post in this thread, that should work ^_^
If it doesn't, I'm not sure how else, than this forum works different than any other forum I've ever used
Dragoboss said:
Try the "Edit" button on ur first post in this thread, that should work ^_^
If it doesn't, I'm not sure how else, than this forum works different than any other forum I've ever used
Click to expand...
Click to collapse
i'm try to click edit button,but it can't be edit the title,
I have tested. it works on Tipo
Sent from my ST21i using xda app-developers app
Julesone said:
I have tested. it works on Tipo
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
Congratulation,don't forget to click thank's button
Sent from my ST23i using xda premium
Work on tipo 11.0.A.4.22 ?
seba2011pl said:
Work on tipo 11.0.A.4.22 ?
Click to expand...
Click to collapse
If you follow the right steps, yes.
It's a downgrade - root - upgrade procedure. As Jules said:
Julesone said:
I have tested. it works on Tipo
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
BTW: don't forget to backup!
messmeww said:
Tutorial root xperia miro on firmware 11.0.A.5.5
i was used this method and it's work,
1. Must be root first on 11.0.A.1.0 firmware
2. The phone must be on 11.0.A.1.0 rooted
3. Download the root file on http://www.mediafire.com/?mjm8iuf4c5fr77q
4. Extract on Empty folder (up to you where's you like to put the folder)
5. Open file "01-local-prop" from the extract the follow the steps
6. After finished, turn off the phone and then flash to 11.0.A.5.5 Firmware
Warning
- If you are use SEUS, don't take "Factory Reset", just update the firmware.
- If you are use Flashtool, don't mark the "Wipe Data", just mark the "Wipe Cache" and wait till the flashing process is done.
7. Run the file "02-push-root-files" on the extracted folder then follow the steps.
Done... Your phone has been rooted to 11.0.A.5.5 Firmware. Don't forget to update the Superuser on Google Playstore. After updating the Superuser, update the Binary file on the superuser app so you can allow app access on the superuser.
if you looking for ftf file xperia miro,please visit >> http://forum.xda-developers.com/showthread.php?p=34272400&postcount=2
Click to expand...
Click to collapse
my device is already 11.0.A.5.5.. how can i root it?
jenkaila said:
my device is already 11.0.A.5.5.. how can i root it?
Click to expand...
Click to collapse
Ugh... Ok. First post tells you that you'd have to downgrade ur phone to a lower firmware version, then root, then flash the newer version again without wiping the root... Please read the 1st post over again.
Or well, it doesn't tell you that litteraly, but yeah...
Get it!!
cwm
Привет из России! не работает cwm на новой прошивке!
Hello from Russia! cwm does not work on the new firmware!
wergon said:
Привет из России! не работает cwm на новой прошивке!
Hello from Russia! cwm does not work on the new firmware!
Click to expand...
Click to collapse
yes, cwm doesn't work on 5.5 firmware,,i have stuck on sony logo after i installed cwm,,
Dragoboss said:
Ugh... Ok. First post tells you that you'd have to downgrade ur phone to a lower firmware version, then root, then flash the newer version again without wiping the root... Please read the 1st post over again.
Or well, it doesn't tell you that litteraly, but yeah...
Click to expand...
Click to collapse
first, i need help here on how to root my miro 11.0.A.5.5 device.
second, thanks . because now i know that there's a process to downgrade your firmware.(which i ddnt know before)..
too complicated.. thought that the process would be easier just like how i root my phone when it was on a lower version.
third, i think i just have to wait longer for the updated version of Bin4ry that could root my miro.
last, if i takes long, then ill have to try and do this process of downgrading my firmware.
thanks.. keep on posting
jenkaila said:
first, i need help here on how to root my miro 11.0.A.5.5 device.
second, thanks . because now i know that there's a process to downgrade your firmware.(which i ddnt know before)..
too complicated.. thought that the process would be easier just like how i root my phone when it was on a lower version.
third, i think i just have to wait longer for the updated version of Bin4ry that could root my miro.
last, if i takes long, then ill have to try and do this process of downgrading my firmware.
thanks.. keep on posting
Click to expand...
Click to collapse
If you want to flash a lower version of firmware, you'll need a few things:
- Flashtool
(I'm not sure of there are other Flashtools around, probably there are, but I use this one, works like a charm).
- An FTF file of the older stock firmware version. Please if someone here has a good ftf file, please post it, as I have no idea where you Miro guys posted them xD
- Patience and Understanding
Documentation on how to use the Flashtool is also in the topic where u should download it from.
As soon as you've got the older firmware version flashed on ur phone, u should follow the tut in this thread, but before you do ANY of this, I recommend you to find a way to backup all ur apps and data. Just in case.
I want to restore my Tipo (Note the dule sim just the normal 1 sim Tipo.
I want to restore to factory settings and start all over again with my phone! Now that there seems to be some bit of movement on CWM and a ROM I just wanna have my tipo back to stock as when I got the phone. From there flash to get it rooted and try all other mods. My tipo seems to be bugged down with no space 4 more apps... I dont know why r how as I dont have that much installed and moved most of the bigger apps to my SD Card. Anyway I wanna do a full factory restore, How do I do this ya`ll??
Thanks in advance :good:
Try using SONY Update Service:
http://www.sonymobile.com/gb/tools/update-service/
RiceydDr0id said:
I want to restore my Tipo (Note the dule sim just the normal 1 sim Tipo.
I want to restore to factory settings and start all over again with my phone! Now that there seems to be some bit of movement on CWM and a ROM I just wanna have my tipo back to stock as when I got the phone. From there flash to get it rooted and try all other mods. My tipo seems to be bugged down with no space 4 more apps... I dont know why r how as I dont have that much installed and moved most of the bigger apps to my SD Card. Anyway I wanna do a full factory restore, How do I do this ya`ll??
Thanks in advance :good:
Click to expand...
Click to collapse
crownpku said:
Try using SONY Update Service:
http://www.sonymobile.com/gb/tools/update-service/
Click to expand...
Click to collapse
If I do it this way wont it update my phone n wont have a root method anymore?
Cheers.
PS
I wanna root, unlock bootlocker and install cyanogenmod.
Well, then you may try to download one of the old firmwares on the forum and flash it to your phone with flashtool.
Sent from my ST26i using xda app-developers app
crownpku said:
Well, then you may try to download one of the old firmwares on the forum and flash it to your phone with flashtool.
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
K il try that cheers.
repair
connect your phone to pc companion
and then click on support
and then click on repair
HIT THANKS IF I HELPED YOU........
hard91 said:
connect your phone to pc companion
and then click on support
and then click on repair
HIT THANKS IF I HELPED YOU........
Click to expand...
Click to collapse
Cheers because i cant seem to do it any other way, il try u method now
hard91 said:
connect your phone to pc companion
and then click on support
and then click on repair
HIT THANKS IF I HELPED YOU........
Click to expand...
Click to collapse
K i have went n tried that but when I go to the support there is no option too repair? All I wanna do Isget my phone back to factory settings, lads plz can someone help me out??
Thx all 4 the help k.:good::good::good:
Lads how do I use flashtool to use the ftf file to restore my tipo. When I open flash tool, it gives me a img of a older xperia phone with silver buttons that it says hold
until u plug back in the usb. ow on the tipo what button should I hold own? Im lost here n I really wanna start a fresh with my phone.
Hello my frnd
Click on support
Click on update
It will show you already uptodate
There is a link in blue colour that
Repair my phone click on that
Congress after that you got factory reset set
no root,no cwm etc.....
Sent from my ST21i2 using xda premium
Hit thanks if I helped you.......
RiceydDr0id said:
K i have went n tried that but when I go to the support there is no option too repair? All I wanna do Isget my phone back to factory settings, lads plz can someone help me out??
Thx all 4 the help k.:good::good::good:
Click to expand...
Click to collapse
Yep sure when it gets to that screen with old sony phone and usb animation on flashtool turn phone off ,hold down lower volume button insert usb and that light should turn green here u need to get a firmware there one on this forum somwhere in the tipo threads
My friend has this phone, when I open it, it boots normally (Has battery) but the touch screen doesn't seem to respond and it automatically reboots itself in a loop. It has the original firmware,
What can i do about it? Since i have samsung, what is the "Samsung Kies" but for Sony phones? could you link me anything useful?
*UPDATE* Actually it's Sony PC Companion and i now got it on my computer...
Thanks!
Google "how to recover Xperia Miro using Sony PCC"
U'll find the answer
Sent from my Xperia Miro using Tapatalk 2
Did he flash any custom rom or did he unlock bootloader? sent it to repair service
We dont need to help him, as he dont give us more info.
Sent from my Xperia Miro using Tapatalk 2
TastyTeo said:
My friend has this phone, when I open it, it boots normally (Has battery) but the touch screen doesn't seem to respond and it automatically reboots itself in a loop. It has the original firmware,
What can i do about it? Since i have samsung, what is the "Samsung Kies" but for Sony phones? could you link me anything useful?
Thanks!
Click to expand...
Click to collapse
Actually 'm New To xda But I'm No Noob!!
Hit Thanks If I Helped!
Try This One Bro(This One Always Works For Me )
You could repair your phone with SUS (It Will Flash The Stock ROM But That Is Not A ProblemYou Can Flash your Custom ROM again)
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software Downloads/Update_Service_Setup-2.11.12.5.exe
Hit thanks if i helped..
Sent from my ST26i using xda premium
kreatonn said:
Google "how to recover Xperia Miro using Sony PCC"
U'll find the answer
Sent from my Xperia Miro using Tapatalk 2
Click to expand...
Click to collapse
Hello, thanks for the suggestion!
lozohcum said:
Did he flash any custom rom or did he unlock bootloader? sent it to repair service
Click to expand...
Click to collapse
No SHE did not flash any custom rom, she barely knows to use the phone, everything is in it's original state.
kreatonn said:
We dont need to help him, as he dont give us more info.
Sent from my Xperia Miro using Tapatalk 2
Click to expand...
Click to collapse
Sorry i wasn't able to be active earlier, if you don't want to help me it's your problem not mine.
GizmOstic1177 said:
Actually 'm New To xda But I'm No Noob!!
Hit Thanks If I Helped!
Try This One Bro(This One Always Works For Me )
You could repair your phone with SUS (It Will Flash The Stock ROM But That Is Not A ProblemYou Can Flash your Custom ROM again)
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software Downloads/Update_Service_Setup-2.11.12.5.exe
Hit thanks if i helped..
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
Thanks for your suggestions!!!
TastyTeo said:
Sorry i wasn't able to be active earlier, if you don't want to help me it's your problem not mine.
Click to expand...
Click to collapse
Well, if u want us to help u, u need to be more specific bout ur prob.
That the proper way to ask question.
Sent from my Xperia Miro using xda premium
kreatonn said:
Well, if u want us to help u, u need to be more specific bout ur prob.
That the proper way to ask question.
Sent from my Xperia Miro using xda premium
Click to expand...
Click to collapse
I tried to be more specific since i started the thread, sorry if i couldn't provide enough info for you my friend i will try to be more detailed for you now if i can.
So my friend has this phone, Miro, she doesn't know much from technology and stuff so i told her to help her out, and i want to get some help from previous owners or anyone that could possibly help me,
So i open the phone from the button, normally, it boots normally, and while on the pin screen, the touch screen doesn't work/respond, and it restarts itself in a loop going in the same position again and again, my idea was to update it, maybe it would work that way, today i will get the phone and try to sort the problem out, i downloaded Sony PC Companion on my pc, but i don't know if this is enough, that's why i need you now, maybe you can suggest me some other kind of solution..
Thanks for responding kreatonn
Sent it to Sony service like lozohcum post might help. The phone is still in warranty?? If still, then it's good.
Sent from my Xperia Miro using xda premium
I SOLVED THE PROBLEM MYSELF! and NO i never take my phone to support because it takes too long and it just comes back unsolved or replaced without actually fixing the problem
So after searching for many minutes of my life through sites and articles, i came up with one about recovering bricked phones, well i wasn't able to use Sony PC Companion because it wouldn't detect it. Or it would but it would restart itself and lose the connection in seconds...
The solution is to FLASH the original firmware with Flashtool
So to solve the mystery
1. Download the original firmware from the xperia collection: HERE
2. Download Flashtool
After all of this history, be sure to get all the drivers needed for the phone you have, if you have windows 7 it will download them automatically if you run and try to flash it since it detects and downloads them with windows update, or else you have to get drivers for your miro and install also the drivers that flashtool needs you to install (it has a folder drivers on it's installation directory)
So when you install Flashtool, Open Flashtool, and Turn off your phone (Remove the battery, and put it back after a few seconds), Do not turn on your phone, just put it on the USB port with the cable.
On Flashtool
1. Put the downloaded firmware into the installation directory of Flashtool, inside the folder, "Firmwares"
2. Open Flashtool (or 64bit version if your windows is 64bit)
3. Press the Thunder, and choose Flashmode
4. On the window that appears, choose MIRO's FIRMWARE and hit OK
Now it has this screen where it waits for you to do something with the usb. It's easy
5. While your phone is turned OFF completely and is probably charging on the USB, Press the VOLUME DOWN button and turn on your phone, the LED will turn GREEN or BLUE i think.
6. The program automatically detects the phone and starts flashing the original firmware
So after that i waited like 2 mins to complete the flashing on Flashtool, and 5 minutes to open the mobile (first time is always slow)
and it would respond, the touch screen and everything.
Thanks for your responses!
Congrats,
Sent from my Xperia Miro using Tapatalk 2
kreatonn said:
Congrats,
Sent from my Xperia Miro using Tapatalk 2
Click to expand...
Click to collapse
finally huh ? Now my friend is very happy and i am very satisfied with myself
i try to "repair" my phone xperia L with pc companion and i get this error [sony update engine failure (error 2003)]...i unlock bootloader before and i try several kernels and one rom after i want to return back to original but i don`t know what is going on...anyone can help me, maybe a link to read what to do or such....thanks in advance
PC Companion can't update/repair when bootloader is unlocked.Relock your BL and try again for repair...
well...
kazabubu said:
PC Companion can't update/repair when bootloader is unlocked.Relock your BL and try again for repair...
Click to expand...
Click to collapse
i relock my bootloader but my mobile is stuck on logo....is looping so i unlock it again and it starts this is my problem now
Hellspawm said:
i relock my bootloader but my mobile is stuck on logo....is looping so i unlock it again and it starts this is my problem now
Click to expand...
Click to collapse
Try flash a ftf in flsshtool
Sent from my ME172V using xda app-developers app
Hipom said:
Try flash a ftf in flsshtool
Sent from my ME172V using xda app-developers app
Click to expand...
Click to collapse
I did i flash random firmware from India. Europe... V 2.17 but still the same problem...it seems like i have modified software...and idk how to fix
Hellspawm said:
I did i flash random firmware from India. Europe... V 2.17 but still the same problem...it seems like i have modified software...and idk how to fix
Click to expand...
Click to collapse
Flash the stock jb ftf by flashtool...
Download from here
http://forum.xda-developers.com/showthread.php?t=2340948
Sent from my ST26i using xda premium
not work
GizmOstic1177 said:
Flash the stock jb ftf by flashtool...
Download from here
http://forum.xda-developers.com/showthread.php?t=2340948
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
i did but is the same error like i have modified software
Hellspawm said:
i did but is the same error like i have modified software
Click to expand...
Click to collapse
What error bro?
GizmOstic1177 said:
What error bro?
Click to expand...
Click to collapse
As i have modified software....i say on my 1st post when i open this threat
Dude first relock ur bootloader.of you have backed up ur ta you can repack the bootloader.then flash a ftf from flash tool. I hope this will work.don't try pc companion.
Hello to everyone!! My Sony ericson live with walkman has a big problem!!!!!!!!!!! :crying:
I turn it on and everything looks fine but 15 seconds after if shows the starting animation and blocks!!!!!!!
It append because I instaled this app: Mont toSD, and it needed starting scripts to work, i installed them but my kernel doesn't allowed it (just found out it latter) i reboot my phone and the thing i explained above append!!!!!!!!!
Does someone know what can I do????
Thanks to everyone who try to help!
DiogoRP said:
Hello to everyone!! My Sony ericson live with walkman has a big problem!!!!!!!!!!! :crying:
I turn it on and everything looks fine but 15 seconds after if shows the starting animation and blocks!!!!!!!
It append because I instaled this app: Mont toSD, and it needed starting scripts to work, i installed them but my kernel doesn't allowed it (just found out it latter) i reboot my phone and the thing i explained above append!!!!!!!!!
Does someone know what can I do????
Thanks to everyone who try to help!
Click to expand...
Click to collapse
Did you tried to factory reset your phone.? If you can't, try Sony update service (SUS). it will make you phone to stock but you will lose your data.!!
Update: Try this link: http://forum.xda-developers.com/showthread.php?t=1849170
Hope it works..!!
Sent from my U8860 using XDA Free mobile app
Question
gulabsameer said:
Did you tried to factory reset your phone.? If you can't, try Sony update service (SUS). it will make you phone to stock but you will lose your data.!!
Update: Try this link: http://forum.xda-developers.com/showthread.php?t=1849170
Hope it works..!!
Sent from my U8860 using XDA Free mobile app
Click to expand...
Click to collapse
My phone has root if i use the Sony Update service to reset my phone it won't "brick" it?
DiogoRP said:
My phone has root if i use the Sony Update service to reset my phone it won't "brick" it?
Click to expand...
Click to collapse
Nope..! SUS is used for restoring back to stock even when your phone has custom ROM.!! So you can use SUS to factory reset.! Go ahead and try.!
Sent from my U8860 using XDA Free mobile app
thanks
gulabsameer said:
Nope..! SUS is used for restoring back to stock even when your phone has custom ROM.!! So you can use SUS to factory reset.! Go ahead and try.!
Sent from my U8860 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks it worked