ATT motorola backckflip .gray. I dont know what OS it was running when bricked. boots to white screen, black moto logo. .button configuration POWER+CAMERA does NOT work.If computer does finally find it , its unknown device. ADB CANNOT find phone.USB debugging seems to be turned OFF inside the phone..The phone WILL let me use button config. J+D+POWER and boots into a blue screen. bottom left corner of screen Bootloader USB Init... From there i m stuck .. the POWER button by its self changes screens from Bootloader USB Init... to Power key reset .If any one can help i appreciate I have looked every where I know to look and every post i have found says MAKE SURE USB DEBUGGING IS ON.. .help needed please ..thanks
Related
my uni stuk at da screen where it says press 0 or x, my desktop pc tell me that usb device not recognized i try all method nothing cant switch on my phone to reach the boot loader mode so cant run mtty utility
i cant charge my battery also its not showing the orange light which comes when u put the uni to charge so i guess cant charge it
mtty not have usb choise
when i make hardrest the screen give me press 0 or x n whatever i press it jus goes blank after that dont go the boot loader mode
i have used the mtty utility earlier 1-2 times but this time i am not able to reach the boot screen so i cant use it
i tried the UNI_ExitBootloader.exe but that also not working
c
i try 2 rest an hard reset 1000000 time
i tried everything nothing working ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
Reply With Quote
mandy_bikerboy said:
my uni stuk at da screen where it says press 0 or x, my desktop pc tell me that usb device not recognized i try all method nothing cant switch on my phone to reach the boot loader mode so cant run mtty utility
i cant charge my battery also its not showing the orange light which comes when u put the uni to charge so i guess cant charge it
mtty not have usb choise
when i make hardrest the screen give me press 0 or x n whatever i press it jus goes blank after that dont go the boot loader mode
i have used the mtty utility earlier 1-2 times but this time i am not able to reach the boot screen so i cant use it
i tried the UNI_ExitBootloader.exe but that also not working
c
i try 2 rest an hard reset 1000000 time
i tried everything nothing working ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
Reply With Quote
Click to expand...
Click to collapse
Try to remove the SDCard and reset the device. if almost persist try the solution proposed in wiki thats says how to exit from bootloader mode.
one thing i just noticed i cant hard reset my phone, when i press the soft keys and reset button nothing happens when i soft reset it nothing happens then also but if i press and hold both the soft keys it lights up and show press o to restore default and x to continue.
whatever i click nothing happens screen goes all black again after that no boot loader mode where u get the serial on the top of the screen and version on bottom cant c anything at all can anyone help in me in making my uni work again or have i wrecked it
i tried mtty but it is not showing me usb coloumn tried exit bootloader but it also does not work it says cannot open usb port make sure usb connection disabled in active syn and make sure usb canle is connected properly
when i attach my uni the pc shows usb device not recognized
PLEASEEEEEEEE HELPPPPPPPPPPPPPPPPPP
Hi
When you want to flash a new ROM you have to remove your SD card. I had the same problem.
Remove it, go to bootscreen mode. Re-flash the ROM.
***Do not worry. These problems arise now and then***
i had done that without sd card and sim card still nothing happened
mandy_bikerboy said:
i had done that without sd card and sim card still nothing happened
Click to expand...
Click to collapse
Hi
I can not tell this is the problem, but what you are telling is somehow a usb break problem.
Try to get your exec to a repair center to have a look at it...
Well hello everyone to start off, i was trinketing around with rom manager and i think i flashed the original droid recovery and 2.5.0.1 into my phone on accident. now when i try to start the phone i get a white M and thats it tryed to boot into recovery only thing i can get to is the holding power and j and d down to get the usb flash init screen which is blue. can someone direct me in the ways of the force and help me bring this phone back to life or am i screwed? I have the j_rodd recovery image on the sdcard but adb wont pick it up as a device.
It is same with me...
Diremaker35 said:
Well hello everyone to start off, i was trinketing around with rom manager and i think i flashed the original droid recovery and 2.5.0.1 into my phone on accident. now when i try to start the phone i get a white M and thats it tryed to boot into recovery only thing i can get to is the holding power and j and d down to get the usb flash init screen which is blue. can someone direct me in the ways of the force and help me bring this phone back to life or am i screwed? I have the j_rodd recovery image on the sdcard but adb wont pick it up as a device.
Click to expand...
Click to collapse
I have problem with my Motorola MB300 ME600. when power even power + up OR power + down it only display and to M logo and make sound (has vib)... I can connect to fast boot even RSD. Help me! Plz....
CyanogenVietNam said:
I have problem with my Motorola MB300 ME600. when power even power + up OR power + down it only display and to M logo and make sound (has vib)... I can connect to fast boot even RSD. Help me! Plz....
Click to expand...
Click to collapse
firmware for your device.
You need to download these things...
RSD Lite 4.5.7
AT&T Stock Android 2.1 Blur v3.0.1390 - Original SBF by Skrilax_CZ @ ModMyMobile
And if you're doing this and haven't attempted root yet, or would just like to wipe your device through and through, HERE are the Moto USB drivers. Make sure to get the correct installer for x86 or x64.
Install your USB Drivers (if you haven't already)
Install RSD Lite
Turn off your backflip
Plug the USB cable into the phone and computer
Open the keyboard and press J+D+Power simultaneously and let up when you see the blue recovery screen with the black moto batwings. In the bottom left corner of the screen it will say in white letters "USB init mode"
Now when the phone boots to the recovery screen, Windows will begin installing a driver for the MSM720x flash recovery mode.
After the driver has successfully installed, open RSD Lite
Upon opening RSD Lite, you should notice ONE connected device in the table below. If not, post what you did exactly and we can help
Now that the device is showing in RSD Lite, click the "..." browse button to point to the Android 2.1 Blur 3.0.1390 image you downloaded earlier
Once that's selected, press start to start flashing your phone.... DO NOT UNPLUG UNTIL IT'S FINISHED.
Once finished, it will reboot itself and you should be presented with the Android Setup after a minute or two.
when im trying to enter the fastboot mode [voluim up+power buttom]
its just transfering me to scree with android logo and it says
"Standart set configuration"
and its stuck there.
i also tried it when usb pluged.
it worked at start, it start happened when i tried to enter the recovery.
what should i do?
standart set configuration... what?
what are you trying to do in the bootloader?
you simply turn the phone off. hold volume up and power button, don't let go of it
just- standart set configuration
with android logo and black background.
i have tried to get into recovery to root my phone.
and yes i just hold these and release it when it turned on.
i also tried to keep holding the the bottons even when it turned on and im getting this
usb control init
usb control init end
you know what is the problem? X:
edit: i think i confuzed with fastboot.
i cant enter the fastboot.
Enableee said:
just- standart set configuration
with android logo and black background.
i have tried to get into recovery to root my phone.
and yes i just hold these and release it when it turned on.
i also tried to keep holding the the bottons even when it turned on and im getting this
usb control init
usb control init end
you know what is the problem? X:
edit: i think i confuzed with fastboot.
i cant enter the fastboot.
Click to expand...
Click to collapse
bootloader != fastboot.
Fastboot is accessed through Android 2.3.X SDK.
http://www.pdasoft.cz/files/root/obrazky_k_clankum/2011/Google-Nexus-S/31-Nexus_S-bootloader.jpg
thats the bootloader. So yes, you're already in the bootloader.
If you want fastboot to work. Look for the rooting thread stickied and follow those instructions. You also need nexus s usb drivers for fastboot to work.
EDIT:nvm i fixed that.
thanks
Hey , how did you solve it , i am stuck
Enableee said:
EDIT:nvm i fixed that.
thanks
Click to expand...
Click to collapse
Hey , i was wondering how did you solve it , i have been trying to solve this problem for two days , can you help me please .
I get the same message as you ,when i try
adb devices - > nothing is listed .
when i try fastbook oem unlock -> exception error
and i can reach to the bootloader only , any help please
Hello all,
I have been searching all day trying to find an answer to this issue but so far have only really found information on the ZTE blade...
Today my ZTE concord (v768) randomly turned off. When i tried to boot it back up, i got stuck at the green android boot screen. I tried taking the battery out and tried to boot with the volume up and power keys, or the volume down and power keys, to try to enter recovery mode with no avail.
I have also tried the guide found here- http://forum.xda-developers.com/showthread.php?t=2426426 and the program wouldnt recognize the device when it was plugged into the computer (stuck at the green android logo).
I also tried installing adb but could not get adb to locate the device.
when i plug the phone in to charge it shows an empty battery container with a circle inscribed in it composed of 6 lines (very similar to this logo, http://www.maclife.com/files/u220903/mac_boot_screen_so_fast_620px.png, but with only 6 lines instead of 12.
Is there anything left to try here? Or is this a hardware issue that no amount of fiddling with software can correct?
Thank you for all of your help, and if you need any more info please let me know!
Hi, its been almost half a year now since i bricked my O3D, im still having problem solving this. I'm still newbie at this so i dont how to solve it. Still stuck at where you fastboot the omap thingy. I cant get into download mode i've tried all sorts of ways and still no luck. Did install OMAP4430 and after that the fastbooot one, tried holding vol+ and plug the cable and no logo appeard on my screen its pitched black only the search/back/home/menu buttons lights on. Then after a minute or less its turn off and the OMAP4430 in the device manager started to appear and disappear all the time, also i cant seem to find the LG port device on my device manger Help?
Page 1 part 1 here
http://forum.xda-developers.com/showthread.php?t=2195753
for pc driver installation. It is rather fiddly, so proceed slowly and read all details carefully. Once it is correct, however, you can use LG Flash Tool, Fastboot, ADB, or whatever for this device.
drastic00 said:
Page 1 part 1 here
http://forum.xda-developers.com/showthread.php?t=2195753
for pc driver installation. It is rather fiddly, so proceed slowly and read all details carefully. Once it is correct, however, you can use LG Flash Tool, Fastboot, ADB, or whatever for this device.
Click to expand...
Click to collapse
did all its says from the top still i cant find the LG port and my device manager keeps on refreshing and the OMAP device also keeps on appearing and disappearing.
Btw i did went(last year ago) to LG costumer service and after a week they said that the main board is the problem, and it cost more likely 40-50% of the original price of my phone Up until now im still hoping for my phone to be fixed.
I would try again; there are a lot of little details there that are easy to miss the first 5 or so times trying to do it. Rebooting pc between each step, for instance. You must be logged onto pc as administrator also. It took me some time before I was able to install the drivers correctly and that was before I wrote it all down in detail.
If it really is the board (I picture a scenario where they want to sell you a new phone) then none of this will help. However, the omap4430 blinking on and off tells me it is trying to connect, but is not installed correctly.
Take your time with each part and carefully check every detail.
omapboot and sw are two different modes.
the "LG port device" appears only in sw mode
omapboot:
you need omap for flashing the custom bootloader
enter the mode: remove the battery and plug your phone to usb while holding vol +, for me its working also when i just plug the phone without battery. if the device is appearing to fast in the devicemanager plug the battery into the phone, and the device should stay and you can install the driver,
sw mode:
is needed when flashing wit lg flashtool or smartflash etc for flashing stock roms or simliar.
you can enter that mode:
plug your phone to usb while holding vol+ with battery insert, and keep holding until the phone screen shows sw and some korean letters.
now you can set the port to 41 in the device manager
troopii said:
omapboot and sw are two different modes.
the "LG port device" appears only in sw mode
omapboot:
you need omap for flashing the custom bootloader
enter the mode: remove the battery and plug your phone to usb while holding vol +, for me its working also when i just plug the phone without battery. if the device is appearing to fast in the devicemanager plug the battery into the phone, and the device should stay and you can install the driver,
sw mode:
is needed when flashing wit lg flashtool or smartflash etc for flashing stock roms or simliar.
you can enter that mode:
plug your phone to usb while holding vol+ with battery insert, and keep holding until the phone screen shows sw and some korean letters.
now you can set the port to 41 in the device manager
Click to expand...
Click to collapse
yes, in the sw mode, thats where i got stucked did hold vol+ w/ and/or w/o battery (tried both) no logo and korean letters appeared on my screen totally pitched black only the search/back/home/menu lights up after that the omap keeps on appearing and disappearing. Tried different cables btw im using win8 and i also tried fresh start on other laptop's of my friends. It's very frustrating
anyone had some success here? I have as well OMAP device on-off, I can go to SW Upgrade mode (no Korean letters though) and to stock recovery.... Tried LGFLashTool2014 (but it crashes on "Read Phone information) and "Flashtool"-Tool, which can enable fastboot and flash uboot, etc. But to no success...