So I have an N8013, completely and totally stock updated with all the latest from KIES/OTA.
I just want to root it. I have searched and what I have found so far is rooting via Exynos Exploit (can't because of OTA patch) and ODIN.
But from what I understand ODIN is for rooting, CWM and flashable ROM's.
I don't want to flash any ROM's. I wan't to root, run titanium backup and triangle away.
So the quickest current method to root a stock device and leave everything else intact is....?
Temetka said:
So I have an N8013, completely and totally stock updated with all the latest from KIES/OTA.
I just want to root it. I have searched and what I have found so far is rooting via Exynos Exploit (can't because of OTA patch) and ODIN.
But from what I understand ODIN is for rooting, CWM and flashable ROM's.
I don't want to flash any ROM's. I wan't to root, run titanium backup and triangle away.
So the quickest current method to root a stock device and leave everything else intact is....?
Click to expand...
Click to collapse
As you can't run the exynos exploit you will need to use ODIN... You Aren't changing roms or kernels but obtaining root and installing a custom recovery.
If you don't want to have a custom recovery use chainfires cf-autoroot - http://forum.xda-developers.com/showthread.php?t=1957002
This will give root access but leave everything else stock. You will need to run triangle away to reset flash counter...
ultramag69 said:
As you can't run the exynos exploit you will need to use ODIN... You Aren't changing roms or kernels but obtaining root and installing a custom recovery.
If you don't want to have a custom recovery use chainfires cf-autoroot - http://forum.xda-developers.com/showthread.php?t=1957002
This will give root access but leave everything else stock. You will need to run triangle away to reset flash counter...
Click to expand...
Click to collapse
Lol, just came back ehre to say I found chainfire's method.
Now I have an issue. I followed all instructions to the letter.
I rebooted in download mode and did not select any options.
I then plugged in my USB cable, fired up ODIN, selected my .MD5 file (both ODIN and .MD5 file were downloaded from the links in the thread).
This is the ODIN output:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifi-p4notewifiue-gtn8013.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifi-p4notewifiue-gtn8013.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
So basically nothing happens. I installed SuperSU from the play store, but it won't run.
My current ROM is still stock, ver
JZO54K.B8013UEUCMD3
Android 4.1.2
Kernel 3.0.31-813049
Model: GT-N8013
In the past when I have rooted a Galaxy S, ODIN filled in #'s in part of the window. I have attached a SS.
I think I might be missing a step? But I have gone over the instructions line by line three times and I still get the same results. Any help would of course be greatly appreciated.
Thanks!
Temetka said:
Lol, just came back ehre to say I found chainfire's method.
Now I have an issue. I followed all instructions to the letter.
I rebooted in download mode and did not select any options.
I then plugged in my USB cable, fired up ODIN, selected my .MD5 file (both ODIN and .MD5 file were downloaded from the links in the thread).
This is the ODIN output:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifi-p4notewifiue-gtn8013.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifi-p4notewifiue-gtn8013.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
So basically nothing happens. I installed SuperSU from the play store, but it won't run.
My current ROM is still stock, ver
JZO54K.B8013UEUCMD3
Android 4.1.2
Kernel 3.0.31-813049
Model: GT-N8013
In the past when I have rooted a Galaxy S, ODIN filled in #'s in part of the window. I have attached a SS.
I think I might be missing a step? But I have gone over the instructions line by line three times and I still get the same results. Any help would of course be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
From what I'm looking at there it seems like the Note hasn't been detected. There should be a value in id:com box....
All it looks like it did was check the MD5 sum...
Have you connected the Note to the PC before? If not, you might require the USB drivers needed by installing KIES. Remember to exit KIES before you try flashing with ODIN though as it can cause problems...
ultramag69 said:
From what I'm looking at there it seems like the Note hasn't been detected. There should be a value in id:com box....
All it looks like it did was check the MD5 sum...
Have you connected the Note to the PC before? If not, you might require the USB drivers needed by installing KIES. Remember to exit KIES before you try flashing with ODIN though as it can cause problems...
Click to expand...
Click to collapse
framaroot
Did you forget to set your Note to 'Download Mode'?
Before connecting the Note to your PC, you have to set your Note to 'Download Mode'.
Turn off your Note, then press and hold Power and Volume-Down buttons, until you get a screen that says 'Press Volume Up'. You should be in download mode now. If you have Odin open on your PC, and when you connect your Note, you should see your Note being detected. I forgot, but the first box on ODIN turns Yellow. You can flash the .MD5 now.
Temetka said:
Lol, just came back ehre to say I found chainfire's method.
Now I have an issue. I followed all instructions to the letter.
I rebooted in download mode and did not select any options.
I then plugged in my USB cable, fired up ODIN, selected my .MD5 file (both ODIN and .MD5 file were downloaded from the links in the thread).
This is the ODIN output:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifi-p4notewifiue-gtn8013.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifi-p4notewifiue-gtn8013.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
So basically nothing happens. I installed SuperSU from the play store, but it won't run.
My current ROM is still stock, ver
JZO54K.B8013UEUCMD3
Android 4.1.2
Kernel 3.0.31-813049
Model: GT-N8013
In the past when I have rooted a Galaxy S, ODIN filled in #'s in part of the window. I have attached a SS.
I think I might be missing a step? But I have gone over the instructions line by line three times and I still get the same results. Any help would of course be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
Man I feel like a fool, lunadomain is correct. You need to go to download mode before using ODIN...
Should've thought of that myself but because I've been doing this for years it's a step that's sort of automatic... Also shift work over 8 or 9 days straight doesn't help....
lunadomain said:
Before connecting the Note to your PC, you have to set your Note to 'Download Mode'.
Turn off your Note, then press and hold Power and Volume-Down buttons, until you get a screen that says 'Press Volume Up'. You should be in download mode now. If you have Odin open on your PC, and when you connect your Note, you should see your Note being detected. I forgot, but the first box on ODIN turns Yellow. You can flash the .MD5 now.
Click to expand...
Click to collapse
Yeah, I do that and I get this screen:
Android System Recovery (3e)
Volume up/down to move highlight;
power button to select
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CDC-code : XAR
Successfully applied multi-CSC.
After that I fire up ODIN, plug in the tablet and nothing.
I just synced it with KIES the other day, and backed up some files so I know the drivers are installed.
Ideas?
lunadomain said:
Before connecting the Note to your PC, you have to set your Note to 'Download Mode'.
Turn off your Note, then press and hold Power and Volume-Down buttons, until you get a screen that says 'Press Volume Up'. You should be in download mode now. If you have Odin open on your PC, and when you connect your Note, you should see your Note being detected. I forgot, but the first box on ODIN turns Yellow. You can flash the .MD5 now.
Click to expand...
Click to collapse
I am an idiot.
I was swapping the volume +/- buttons.
Grr.
Ok so it's rebooting.
Will check SU in a sec.
Next is nandroid backup, then some other ROM.
Probably CM10. Who knows.
So I am rooted and de-triangled.
Yay.
But I am sticking with stock. I have almost 50 notebooks in Snote and my research has revealed that Snote won't run on non-Touchwiz ROM's.
Since I can't add Touchwiz to CM10, I am sticking with it.
You don't have to use cm Roms you can always check out touchwood touchwiz based roms
Sent from my HTC One using xda premium
Related
GT-S7500 BootLoop Fixing​
Hello My Friends !!
Today i am gonna show you 2 ways on how to fix a bootloop on GT-S7500 galaxy Ace plus.
These methods are also for those who soft-bricked there phones.
Click to expand...
Click to collapse
Method 1(easy):
SomeTimes,when you are trying to flash a Rom or making a nandroid backup and there is no memory space,you face a CWM bootloop (Rebooting to recovery again and again) and thats not a hard thing to fix,because you have only flash your recovery or any other recovery again !! Thatss very simple Hein??!
Click to expand...
Click to collapse
Method 2(Advanced):
This Method is good when you Stuck at the Samsung Boot screen,The phone vibrates and then freez at the boot screen.
Fixing this is by flashing your original stock firmware.
Follow Me:
1)First you have to download the firmware from Here
2)Download Odin v 1.85 from attachements
3)Turn Off your phone and boot into download mode (Volume down+Home+Power) And Press volume Up to continue
Now your ace plus should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4)Now on your PC,open odin v.185 then select PDA and choose the firmware hat you have downloaded (Home.tar.md5) like this:
5)Now Connect your phone via USB Cable to your computer , ID:COM must turn Yellow like this:
6)Make sure That ONLY "Auto Reboot" And "F.reset Time" are checked ,and Repartition is UNCHECKED (Look to the pic)
7)Finaly,Hit the Start Button And the process to finish (About 3 min) and Odin will say PASS in Green.
Flashing Stock Firmware Success.
Click to expand...
Click to collapse
Notes:First Boot May Take Some Time
It is advisble to do a Data reset after flashing
If Odin does nor recognize your phone,So install Samsung USB Drivers Or try with a Diffrent version of Odin
Disable your antivirus and Kies before Starting the mission
Click to expand...
Click to collapse
Hit Thanks If I helped You!
Need Help?
danyznd123 said:
Hi,
Have you ever stuck in a cwm bootloop(reboot to clockworkmod again and again) or stuck at the boot screen in your GT-S7500?
I will show you how to fix it. (ONLY GT-S7500 NO OTHER VARIANTS !)
There is only one way to fix it:reinstall your stock firmware.
First,download needed files here:1)The firmware from here http://www.sammobile.com/firmwares/ and type in the Search option "GT-S7500" and choose your country
And if you want another firmware to another country search by google or www.samsung-updates.com This site is better due the shutdoen of hotfile,samsung-updates uploaded firmware to mirrors
2)odin3 v1.85
Extract files.
Now turn off you phone and go to download mode by pressing volume down+home+power
Connect your phone to your computer and open odin3.Wait until ID:COM turn yellow.
"Auto reboot" and "F.reset time" must be checked and "Re-partion" must be UNCHECKED.
Now press PDA in odin and choose the firmware that you have downloaded(the stock firmware must be a .tar or .md5 file) and press START.
Wait 4 to 5 minute to finish the process.And when it is finished you will see "PASS" in odin.
Now your phone will reboot.Wait until your phone finish rebooting and unplug your ace +
Thats it!your phone will turn on again now! Press thanks if i helped you.
Enjoy!!!:laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
IF someone need a help or need a firmware just comment and i will give you the link!
And if you fail to do the procedure just say and I will reply!!
Press Thanks if I helped you!!!!
danyznd123 said:
IF someone need a help or need a firmware just comment and i will give you the link!
And if you fail to do the procedure just say and I will reply!!
Press Thanks if I helped you!!!!
Click to expand...
Click to collapse
Does anyone needs help??
Just comment!!
18 downloads and only 2 thanks?!
Btw I am now a senior! :angel:
lol
Er @danyznd123, all you have shown here is how to flash stock ROM, there already is a guide for that
mon_iker said:
Er @danyznd123, all you have shown here is how to flash stock ROM, there already is a guide for that
Click to expand...
Click to collapse
Yes but the beginners will not know that to fix the cwm bootloop they have to flash the stck firmware...
danyznd123 said:
Yes but the beginners will not know that to fix the cwm bootloop they have to flash the stock firmware...
Click to expand...
Click to collapse
its pretty obvious that if your phone doesn't boot you have to flash stock
or even restore a backup....that is easier
Is it zip file or tar file to put in odin? Because i downloaded the firmware and it's zip file. Can you help me?
HasbullRedBull said:
Is it zip file or tar file to put in odin? Because i downloaded the firmware and it's zip file. Can you help me?
Click to expand...
Click to collapse
Yes jsut unzip the file that you have downloaded and you will get 2 files:
1)the firmware .tar.md5
2)A dll file
The .tar.md5 file is the firmware to put on odin
Thank you for your help!!! :good::good:
First off: This is my very first try.
Not sure if I did something wrong or I'm just too stupid to follow the instructions..
So, I visited that firmware-site, downloaded the german firmware and Odin.
turned my phone on via download mode and connected my phone to my laptop and started Odin.
no problems so far until Odin is running.. the ID:COM-thingy doesn't show anything up at all so I thought I might just click on "Start" anyway
log: <OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0) ,
didn't work either. (I'm a new member so I can't post a link/picture of my Odin)
In download-mode (on my phone-screen) it says:
[ODIN3]
PRODUCT: GT-S7500
VERSION: S7500XXMC2
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
"Downloading... Do not turn off target !!"
Psychobay said:
First off: This is my very first try.
Not sure if I did something wrong or I'm just too stupid to follow the instructions..
So, I visited that firmware-site, downloaded the german firmware and Odin.
turned my phone on via download mode and connected my phone to my laptop and started Odin.
no problems so far until Odin is running.. the ID:COM-thingy doesn't show anything up at all so I thought I might just click on "Start" anyway
log: <OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0) ,
didn't work either. (I'm a new member so I can't post a link/picture of my Odin)
In download-mode (on my phone-screen) it says:
[ODIN3]
PRODUCT: GT-S7500
VERSION: S7500XXMC2
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
"Downloading... Do not turn off target !!"
Click to expand...
Click to collapse
Thats not a big problem:
Try these tow things:
1)Try with a different version of odin (like 3.04/1.87 ...)
2)If it didn't work you have to install samsung drivers or install kies
Ok, the ID:COM thingy is fixed now, thanks a lot!
Kies is updated to the latest version, it says FAIL! in Odin now, though.
Any way to fix that? I guess followed your steps corretly.. turned my phone on in download mode, pressed vol+, connected it to the cable.
Mobile says "downloading..." and the log says this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
---------- Post added at 10:27 PM ---------- Previous post was at 10:15 PM ----------
Ignore my last post, just tried it with Odin 3.4 and IT FINALLY WORKS!!!!
IM SO THANKFUL RIGHT NOW!!!
THANKS SOOOO MUCH, I LOVE YOU SIR! :laugh::laugh::laugh::laugh:
Psychobay said:
Ok, the ID:COM thingy is fixed now, thanks a lot!
Kies is updated to the latest version, it says FAIL! in Odin now, though.
Any way to fix that? I guess followed your steps corretly.. turned my phone on in download mode, pressed vol+, connected it to the cable.
Mobile says "downloading..." and the log says this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
---------- Post added at 10:27 PM ---------- Previous post was at 10:15 PM ----------
Ignore my last post, just tried it with Odin 3.4 and IT FINALLY WORKS!!!!
IM SO THANKFUL RIGHT NOW!!!
THANKS SOOOO MUCH, I LOVE YOU SIR! :laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
youe welcome
thread updated
Thanks a lot. It works :thumbup:
Inviato dal mio GT-S7500 con Tapatalk 2
magico18 said:
Thanks a lot. It works :thumbup:
Inviato dal mio GT-S7500 con Tapatalk 2
Click to expand...
Click to collapse
You r welcom
bootloop fix zip
danyznd123 said:
Yes but the beginners will not know that to fix the cwm bootloop they have to flash the stck firmware...
Click to expand...
Click to collapse
sir here i found this zip 1 or 2 weeks ago in some thread on xda developers only it was an attachment with a custom rom(its name i dont remember,but surely its not mine) i tried and it worked every time when i was stuck in bootloop
download zip here View attachment FIX_BOOTLOOP.zip
amritanshusingh3 said:
sir here i found this zip 1 or 2 weeks ago in some thread on xda developers only it was an attachment with a custom rom(its name i dont remember,but surely its not mine) i tried and it worked every time when i was stuck in bootloop
download zip here View attachment 2671263
Click to expand...
Click to collapse
Yes but this zip is only for cwm v6
What's up, guys? So today i'm guiding you how to install TWRP 2.8.6.0 recovery and root on your GT-P5200 device. I'm very sorry for the delays of the download links, Squadron 3 is struggling with the bugs. But as i expected, it would be here for the next couple hours after this thread is posted. But before that, i'll head to the steps and requirements.
REQUIREMENTS
-Your device with more than 30% of battery charged
-A PC(Windows would be great)
-USB Cable
-Wi-Fi connection
-Your brain and riskiness that can drive your device to Cuckoo Clock City
Now that you have whatever those are up there and the files i will post soon enough, let's get REALLY started!
1.Open the USB drivers setup on your PC and install the drives.
2.Download the root file to your device, power it off and connect it to your PC via USB cable.
*Before the third step, make sure you've downloaded EVERY file except the root file to your PC:
-Drivers setup like in step 1
-Odin 3.07
-Recovery(.tar) file
3.Run Odin and boot your device into Download mode(Power+Volume Down)
4.(Odin)Uncheck "Auto Reboot" and click "PDA", then choose the .tar recovery file.
5.Click "Start" when there's a COM thing appears under the first big box
6.Wait until it says "PASS", then disconnect your device from your PC
7.Hold power button until the screen's completely dark.
8.Boot into recovery mode(Power+Volume Up)
9.After it is in the home recovery screen, choose "Install", then go to the folder where you put the root file in.
10.Choose the root file(Make sure you remember its name)
11.Swipe, wait for it to flash, then reboot your device(There'll be a reboot button after the flashing is done, so hit it to reboot your device)
12.Enjoy rooting! Download Root Checker to verify root access from SuperSU(will be automatically installed after flashing and rebooting)
Special thanks
Laguire Sien Tiamat
Matrixians Squadron 3
Kamensek Technology Labs
That Guy
Download Links
It arrived sooner than i expected.
On your PC:
-USB Drivers: https://www.androidfilehost.com/?fid=24269982087004084
-Odin 3.07: https://www.androidfilehost.com/?fid=24269982087004070
-Recovery: https://www.androidfilehost.com/?fid=24269982087004072
On your device:
-Root: https://www.androidfilehost.com/?fid=24269982087004078
Enjoy, may the cuckoo-bazookas never be with you.
The file of recovery is invalid!
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> TWRP-P5200.tar.md5 is invalid.
<OSM> End...
AntoLoLLista said:
The file of recovery is invalid!
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> TWRP-P5200.tar.md5 is invalid.
<OSM> End...
Click to expand...
Click to collapse
Rename it to "recovery" and it'll work. Sorry for the mess, especially if your device have gone to heaven.
i have a problem... i tried doing it but it said "reset!" on the blue box
Ok, My idiot cousin managed to somehow bring up an error saying "Custom binary blocked by FRP, SECURE FAIL: KERNEL"
I've went through a few videos to fix this but they don't work for some strange reason.
(Kies- youtube.com/watch?v=XKJy9VGV1oM )
Using Kies just dosent allow me to click the Start Upgrade button and Odin3 brings up a error,
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
*Presses start*
<OSM> All threads completed. (succeed 0 / failed 0)
Model : SM-G530W
Hi FullWithLag
Thank you for using XDA Assist
You didn't specified the Manufacturer & Model of your device and, as so, it will be difficult to point you to the right XDA Section.
The below thread reports successful actions tackling this same error message you have but for the Galaxy Gran Prime
Custom binary blocked by FRP
To improve out support could you please state the Manufacturer & Model of your device ?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
FullWithLag said:
]Ok, My idiot cousin managed to somehow bring up an error saying "Custom binary blocked by FRP, SECURE FAIL: KERNEL"
I've went through a few videos to fix this but they don't work for some strange reason.
(Kies- youtube.com/watch?v=XKJy9VGV1oM )
Using Kies just dosent allow me to click the Start Upgrade button and Odin3 brings up a error,[/SIZE]
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
*Presses start*
<OSM> All threads completed. (succeed 0 / failed 0)
Btw, Video will be up in 30 mins
Click to expand...
Click to collapse
Kdio said:
Hi FullWithLag
Thank you for using XDA Assist
You didn't specified the Manufacturer & Model of your device and, as so, it will be difficult to point you to the right XDA Section.
The below thread reports successful actions tackling this same error message you have but for the Galaxy Gran Prime
Custom binary blocked by FRP
To improve out support could you please state the Manufacturer & Model of your device ?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
Click to expand...
Click to collapse
Thanks, Added model number
FullWithLag said:
Thanks, Added model number
Click to expand...
Click to collapse
Hi FullWithLag
Thank you for the prompt answer
If is indeed a Grand Prime, you already have a link to start digging a solution.
If you have any further questions regarding your device, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Galaxy Grand Prime Q&A, Help & Troubleshooting
Nice regards and good luck.
Samsung S7 SM-930F. Rooted and running Lineage0S 15.1 for past year without problem. I've noticed over the past few weeks that it had rebooted when charging overnight.
Now it only loads to the Samsung screen. I've tried restarting it, taking the SD card out but the only screen I can access apart from the logo screen is the download mode. It won't turn off using the power button either.
I've used Odin 3.12.3 and a few other versions along with different cables and PC's but every time I try to install a stock rom (tried a few) Odin gets to this stage and nothing else happens..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
Do you think there is a fault with one of the chips on the system board?
alfarom said:
Samsung S7 SM-930F. Rooted and running Lineage0S 15.1 for past year without problem. I've noticed over the past few weeks that it had rebooted when charging overnight.
Now it only loads to the Samsung screen. I've tried restarting it, taking the SD card out but the only screen I can access apart from the logo screen is the download mode. It won't turn off using the power button either.
I've used Odin 3.12.3 and a few other versions along with different cables and PC's but every time I try to install a stock rom (tried a few) Odin gets to this stage and nothing else happens..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
Do you think there is a fault with one of the chips on the system board?
Click to expand...
Click to collapse
This model is really easy to flash and shouldn't give too many issues. The latest Odin for this model is 3.13.1 so try that first.
I've noticed myself going back to any ROM after Lineage can sometimes cause problems.
Got TWRP installed? Then put the ROM on the SD card and flash with TWRP
Want to flash stock? then use UK BTU unbranded flash with Odin,
To turn off when in download mode >>>>power+home+volume down. Once the phone goes off power+home+volume up to boot into TWRP is thats what you want.
I've tried the latest ODIN with the same results. The phone won't shutdown no matter what I try. Power + Home + Volume Up doesn't boot into twrp either (which is already installed). Just brings me to the screen where I can continue, which brings the logo screen up or press Volume Up to get to Downloading screen. The only way it turns off is by running the battery down.
I can't access the SD card either. The phone is recognised by ODIN but doesn't show up on the PC at all.
alfarom said:
I've tried the latest ODIN with the same results. The phone won't shutdown no matter what I try. Power + Home + Volume Up doesn't boot into twrp either (which is already installed). Just brings me to the screen where I can continue, which brings the logo screen up or press Volume Up to get to Downloading screen. The only way it turns off is by running the battery down.
I can't access the SD card either. The phone is recognised by ODIN but doesn't show up on the PC at all.
Click to expand...
Click to collapse
Ok, I've been here too but before you get the hardware looked at can i just check the following which may or may not make a difference. I know some questions may sound stupid but as i can't see the phone, please answer.
Is FRP lock on or off?
Is OEM enabled
Does holding down just the power button turn the phone off (i've never once not been able to force restart any android device when stuck on download screen).
Try a combination of different buttons to force start for example AND in this order
* home+volume down+power
* volume up+power (only)
* home+power (only)
If any of these work, as soon as the phone shuts off release power then quickly press volume up+home+power
Does Odin "add" the phone in download mode?
Before you press "volume Up" to continue to download mode, what text appears in the top left of the screen, please post a picture here if you can.
What exact firmware are you trying to flash and where did you get it from?
Is the firmware your trying to flash in 4 parts or just one .md5 file?
Do you know how to use SamFirm Tool?
Do you have Smartswitch running or installed on your PC?
Do you have antivirus running?
Also re flash TWRP via odin
Sorry for the interrogation but i need to eliminate possible causes.
Is FRP lock on or off?
Is OEM enabled
Don't know as I can't get into phone now.
Does holding down just the power button turn the phone off (i've never once not been able to force restart any android device when stuck on download screen).
Try a combination of different buttons to force start for example AND in this order
* home+volume down+power
* volume up+power (only)
* home+power (only)
Nothing seems to turn the phone off
Does Odin "add" the phone in download mode?
Yes, it shows up in Odin
Before you press "volume Up" to continue to download mode, what text appears in the top left of the screen, please post a picture here if you can.
I think it just has the standard text in the top left but I'll check when I get to the phone, shortly.
What exact firmware are you trying to flash and where did you get it from?
Is the firmware your trying to flash in 4 parts or just one .md5 file?
Tried various firmwares (all 4 parts) without success
Do you know how to use SamFirm Tool?
Do you have Smartswitch running or installed on your PC?
Do you have antivirus running?
Also re flash TWRP via odin
Haven't tried the SAMFIRM tool yet
SmartSwitch wouldn't work when I tried it.
Only AV running is Microsoft's built in product.
alfarom said:
Is FRP lock on or off?
Is OEM enabled
Don't know as I can't get into phone now.
Does holding down just the power button turn the phone off (i've never once not been able to force restart any android device when stuck on download screen).
Try a combination of different buttons to force start for example AND in this order
* home+volume down+power
* volume up+power (only)
* home+power (only)
Nothing seems to turn the phone off
Does Odin "add" the phone in download mode?
Yes, it shows up in Odin
Before you press "volume Up" to continue to download mode, what text appears in the top left of the screen, please post a picture here if you can.
I think it just has the standard text in the top left but I'll check when I get to the phone, shortly.
What exact firmware are you trying to flash and where did you get it from?
Is the firmware your trying to flash in 4 parts or just one .md5 file?
Tried various firmwares (all 4 parts) without success
Do you know how to use SamFirm Tool?
Do you have Smartswitch running or installed on your PC?
Do you have antivirus running?
Also re flash TWRP via odin
Haven't tried the SAMFIRM tool yet
SmartSwitch wouldn't work when I tried it.
Only AV running is Microsoft's built in product.
Click to expand...
Click to collapse
Ok, So Sanfirm Tool is easy to use and gets the files from Samsung servers much faster than Sammobile.
If Odin sees the phone i would first suggest flashing the latest TWRP for OREO again via Odin and hopefully you can boot into TWRP recovery and see whats actually still on the device. If you can get into TWRP then we're on our way
With regards to not being able to turn the phone, how long are you holding volume down+home+power for?
Also SD card....can you place it in your pc to drag and drop files to it?
Uninstall smartswitch as a precaution but ensure Samsung USB drivers are installed.
Odin sees the phone but I can't flash Twrp to it. It just stops on the initialization screen. Also, I can't access the phone through the PC even though you hear it connect and shows up in Odin.
I've tried every button combination I can think of and held them down for minutes at a time.
I'll try the SanFirm tool next.
I think I am using the wrong model and region in SamFirm. I've entered SM-G930 and XA but get this message
Could not fetch info for SM-G930/XA. Please verify the input or use manual info
I've found this link for UK Region..
United Kingdom: ---> BTU, BTC, CPW, EVR, H3G, O2U, ORA, OXA*, TMU, TSC, VIR, VOD, XEU
Just realised I should have been using SM-G930F. I'm downloading the H3G one now but should it be another if the phone was previously locked to Plusnet in the UK?
Downloaded firmware using SM-G930F and H3G but Odin still stops at Initialization.
Also, FTP Lock is Off according to the phone. Pic Attached..
Do you think this phone has a hardware issue, maybe a problem with the eMMC chip?
alfarom said:
Downloaded firmware using SM-G930F and H3G but Odin still stops at Initialization.
Also, FTP Lock is Off according to the phone. Pic Attached..
Click to expand...
Click to collapse
BTU is UK unbranded
It may have a hardware fault yes but unless it been dropped hard or got wet etc it's very rare for it to be hardware related
Just tried BTU with same result.
alfarom said:
Just tried BTU with same result.
Click to expand...
Click to collapse
Yeah i been chatting to a mate, you absolutely need to reboot into download mode every time a flash fails or it will get stuck at initialization. Is this the error you keep getting?
Also have you tried different usb port? and are you running Odin as Admin?
I can reboot into download mode without any problem but can't turn the phone off at all. Volume Down and Power buttons restarts as far as the logo screen and that's about it as far as I can do anything.
alfarom said:
I can reboot into download mode without any problem but can't turn the phone off at all. Volume Down and Power buttons restarts as far as the logo screen and that's about it as far as I can do anything.
Click to expand...
Click to collapse
Ok so that what i needed to know, if you can only reboot into download then yes that's what happens the phone just won't go off.
So what error are you getting in Odin when you attempt to flash, can you post a pic of what files are going where in Odin before you flash?
All Odin does is stop when it comes to INITIALIZATION. Nothing happens after that no matter how long I leave the phone connected. I've added the BL, AP, CP and CSC files into the appropriate boxes in ODIN. It never comes up with FAIL or any other sign of anything happening.
alfarom said:
All Odin does is stop when it comes to INITIALIZATION. Nothing happens after that no matter how long I leave the phone connected. I've added the BL, AP, CP and CSC files into the appropriate boxes in ODIN. It never comes up with FAIL or any other sign of anything happening.
Click to expand...
Click to collapse
Are you using the HOME_CSC file or CSC in Odin?
Have you also got a firmware in .md5 format? (one file?)
Swapped usb cables and ports on pc?
Tried HOME_CSC and just CSC. Haven't got an .md5 file. I couldn't find one. Swapped cables and pc.
Trying to flash a TWRP tar file using the AP option just stops at INITIALIZATION.
Hello,
I've been trying for the past 3 days to flash the latest version of Android 9.0 on my S8+ (SM-G955U) from Verizon, since updates for it have never come.
The baseband of the firmware I've been trying to flash on my S8+ through Odin is G955USQU5DSD3, but it keeps giving me this error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1303)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4920 M
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Needless to say, I went on a Googling spree to try to fix this problem with no avail.
It apparently has something to do with my Laptop not being able to communicate with my phone, so I tried utilizing every other port it had, didn't work.
Then tried with different cables, even bought new ones, also didn't work. Utilized all sorts of different versions of Odin3 in Administrator Mode, such as v3.13.1, v3.13.1_3B, v3.13.3 and PrinceComsy, no dice.
And yes, I have the Samsung ADB Drivers installed, SmartSwitch uninstalled and USB Debugging on.
The OS my phone is currently running is the Android 9.0 Beta (G955USQU5DRL5) that leaked back in December and I installed doing this tutorial: https://bit.ly/2T7LhD0
I've tried all sorts of other methods such as https://bit.ly/2H7V7jY, but they didn't work. Heck, I've even tried downgrading the OS to G950USQS5CRK1 and G955USQS5CRL1 but again, same error, so at least I don't think its because of the firmware.
Any suggestions?
Arcane35 said:
Hello,
I've been trying for the past 3 days to flash the latest version of Android 9.0 on my S8+ (SM-G955U) from Verizon, since updates for it have never come.
The baseband of the firmware I've been trying to flash on my S8+ through Odin is G955USQU5DSD3, but it keeps giving me this error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1303)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4920 M
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Needless to say, I went on a Googling spree to try to fix this problem with no avail.
It apparently has something to do with my Laptop not being able to communicate with my phone, so I tried utilizing every other port it had, didn't work.
Then tried with different cables, even bought new ones, also didn't work. Utilized all sorts of different versions of Odin3 in Administrator Mode, such as v3.13.1, v3.13.1_3B, v3.13.3 and PrinceComsy, no dice.
And yes, I have the Samsung ADB Drivers installed, SmartSwitch uninstalled and USB Debugging on.
The OS my phone is currently running is the Android 9.0 Beta (G955USQU5DRL5) that leaked back in December and I installed doing this tutorial: https://bit.ly/2T7LhD0
I've tried all sorts of other methods such as https://bit.ly/2H7V7jY, but they didn't work. Heck, I've even tried downgrading the OS to G950USQS5CRK1 and G955USQS5CRL1 but again, same error, so at least I don't think its because of the firmware.
Any suggestions?
Click to expand...
Click to collapse
Not sure I can help since you have done most of the of what I was going to suggest
Has odin worked before on your PC?
Try installing latest Samsung USB drivers on your PC ( not ADB drivers)
Try a different PC
I know you said you have tried everything but in the link you posted the technique seemed a littled different than what worked for me after about 4 days of trying everything.
I am trying to find the post that I got this from but there are so many to sort thru so I'm still looking. I'll try and give credit when i find it.
Make sure odin is closed and I just close everything honestly so i know there isnt any kind of interference.
So first step is reboot to download using the volume down, bixby button and power. Once there do not press any other buttons. Simply plug in your usb cord to the phone and set it down.
Next open odin as an administrator and load the firmware files to their slots.
Once that is finished and its not thinking anymore go ahead and push volume up.
Soon as you see "COM:XX" pop up hit start and cross your fingers. I bet I tried about 10 times before it finally worked. It would fail differently so I knew I was on the right track. My model is a SM-G955U but it would not accept that firmware. I ended getting the SM-G955U1 firmware that was from a month past the last firmware my phone had on it to work.
You may have tried all and like me thought it was a load of crap but it for real worked with a little perseverence, rode a unicorn to catch a leprachaun, under a falling store on my birthday while the birthday candle was still lit and it worked!!!
Good luck bro,
FreshOut
spawnlives said:
Not sure I can help since you have done most of the of what I was going to suggest
Has odin worked before on your PC?
Try installing latest Samsung USB drivers on your PC ( not ADB drivers)
Try a different PC
Click to expand...
Click to collapse
When I installed the Beta back in December, I did it on my old desktop PC. So technically no, Odin hasn't worked before on the Laptop I'm using right now, it's in fact the first time I try to use it there. Tried the Samsung USB drivers suggestion, looks like I already had those installed.
Using a different PC seems like the only thing left for me to try, which I unfortunately can't for a while, hence why I'm trying to find other solutions so desperately
2FrEsH99 said:
I know you said you have tried everything but in the link you posted the technique seemed a littled different than what worked for me after about 4 days of trying everything.
I am trying to find the post that I got this from but there are so many to sort thru so I'm still looking. I'll try and give credit when i find it.
Make sure odin is closed and I just close everything honestly so i know there isnt any kind of interference.
So first step is reboot to download using the volume down, bixby button and power. Once there do not press any other buttons. Simply plug in your usb cord to the phone and set it down.
Next open odin as an administrator and load the firmware files to their slots.
Once that is finished and its not thinking anymore go ahead and push volume up.
Soon as you see "COM:XX" pop up hit start and cross your fingers. I bet I tried about 10 times before it finally worked. It would fail differently so I knew I was on the right track. My model is a SM-G955U but it would not accept that firmware. I ended getting the SM-G955U1 firmware that was from a month past the last firmware my phone had on it to work.
You may have tried all and like me thought it was a load of crap but it for real worked with a little perseverence, rode a unicorn to catch a leprachaun, under a falling store on my birthday while the birthday candle was still lit and it worked!!!
Good luck bro,
FreshOut
Click to expand...
Click to collapse
Hey man thanks for the suggestion, been trying to do just as you say and honestly I'm not seeing any difference in the process, it's still giving me the same error just like it would if I had done it normally, no "failing differently" every attempt.
I'm guessing that each time it fails, you unplug and restart the phone as well as close Odin for another attempt?
i cant flash anything on drl4. tried everything also.
Arcane35 said:
Hey man thanks for the suggestion, been trying to do just as you say and honestly I'm not seeing any difference in the process, it's still giving me the same error just like it would if I had done it normally, no "failing differently" every attempt.
I'm guessing that each time it fails, you unplug and restart the phone as well as close Odin for another attempt?
Click to expand...
Click to collapse
Yeah each time it failed I would hold the three button combo down until it rebooted to the download mode confirmation screen and then start the whole process over again. One thing I did forget to mention but I'm not sure if it played a part in finally being able to flash with odin is that i completely disabled my firewall so that all ports were wide open. I read somewhere about the firewall causing issues so eliminated it while I was trying to use odin.
I was messing around with the same phone some more since I posted and still had issues with odin so im not sure exactly what Im doing differently sometimes. Im ready to crash out now but I will try and take a screenshot of my drivers when I flash with odin again so you can compare it to yours.
Hope you get it figured out man. Frustrating as hell I know!!! I was ready to smash the thing into into a wall and count how many pixels there really are lol. Good luck bro!!
P.S. One last thing I completely spaced. Im on a laptop also. (Acer Nitro 5 with AMD....) I have a powered USB 3.0 hub running off a my USB 3.0 port and its only when I was plugged into the fast charging with a 3.0 cable that I finally got success. Everything Ive read says flashing thru a hub is a no no but IDGAF anymore and it worked. Try at your own risk but that does seem to be what affected my whole debauchle.
Oh my god it finally worked.
I tried doing what was in this link again: https://bit.ly/2H7B9FW , which I remember trying before and not working. In my desperation I attempted to do it again and the rest is history.
I had turned my Firewall off, in case that did anything. Good luck to anyone else having this problem!
So I just use my SS10 usb 3.1 ports for odin and that takes care of the problems with odin. not sure which odins im using. maybe prince cosmy. but changing usb ports have solved all my odin issues and flashes on the s8+. Im now operating on G955U1UES6DSI1, the latest firmware on the unlocked 955u1.