[Q] HDMI Cable Disconnects WiFi - T-Mobile LG G2x

Hey guys, I have a bit of an issue here.
My G2X wifi runs perfectly fine, Netflix and Youtube stream perfectly. I connect an HDMI cable to the phone, and it still works perfectly. I connect the other end of the HDMI cable into the TV and it still works perfectly. Then I turn the TV on, and all wifi connectivity disappears instantly. I can still use the TV to display my phone's screen without any problems, but obviously I can't use my browser / stream any video or use the internet whatsoever (I don't have a data plan, so I can't test if that still works or not).
Furthermore, the second I turn the TV back off or disconnect my phone the signal immediately goes back to normal. Also, I've used this phone with a different HDMI cable and TV at another person's house and it had no problems. The TV I'm using is an LCD Sanyo DP32746. The HDMI cable I'm using is a 6 foot HDMI (Type A) to HDMI Micro (Type D) cable sold by OneAce Tech.
So has anyone had this same issue? Does anyone know a workaround or a fix?

I have this issue also but I use Paranoid Android ROM. The last time I tried using it with CM7 I didn't have any issues, maybe it's your ROM.
Sent from my LG-P999

xBkKx said:
I have this issue also but I use Paranoid Android ROM. The last time I tried using it with CM7 I didn't have any issues, maybe it's your ROM.
Sent from my LG-P999
Click to expand...
Click to collapse
Do you think I should try CM7 then? I did a factory reset about a month ago and haven't made any modifications since except for standard app downloads.

Well if you're using the same ROM as me I don't think it works and there is no source for it anymore to fix it. From my experience it works fine with CM7 though
Sent from my LG-P999

Related

[Q] HDMI Out Problem {resolved}

Dang, another problem with my Transformer (or with the cable.)
I bought the bundle off of TigerDirect with the Transformer, Mini HDMI cable and case.
I finally got around to opening up the cable and I connected it to my HDTV. Nothing happens.
I did some Googling and it said make sure the cable is fully inserted (yep) and that a HDMI notification should appear on the device. (nope)
Anybody else buy this bundle and try to connect to their HDTV? I'm trying to figure out if it's the cable or the device.
I tried rebooting it as the old standby fix, but still no-go.
Thanks!
Went and tried on my friend's HDTV and it worked like a charm.
Not sure what it is about my Panasonic plasma 1080p monster, but it doesn't work on it at all.
And I know the port is good, it's where I hook up my PS3.
Not too concerned because I won't use that feature too much, but I was thinking of how some hotels now offer HDMI in, so that's awesome the next time I need to travel for work.
Load up some music, some TV shows, a couple games, AND I can even do some work. (Yeah, right!)
I tried mine yesterday on our Samsung and it worked well, I was pleasantly surprised how simple it was to use.
Yeah, me too! (After I put it on a different tv.)
I was also surprised how good it looked for mirroring the display after some people said it didn't look great. Surfed, read some e-mail, even started up the Samurai game and everything looked excellent.
Looking forward to the 3.1 update which supposedly will support 1080p!
bleclair said:
Dang, another problem with my Transformer (or with the cable.)
I bought the bundle off of TigerDirect with the Transformer, Mini HDMI cable and case.
I finally got around to opening up the cable and I connected it to my HDTV. Nothing happens.
I did some Googling and it said make sure the cable is fully inserted (yep) and that a HDMI notification should appear on the device. (nope)
Anybody else buy this bundle and try to connect to their HDTV? I'm trying to figure out if it's the cable or the device.
I tried rebooting it as the old standby fix, but still no-go.
Thanks!
Click to expand...
Click to collapse
How did you end up fixing this issue? I am having the same problem.
AllTheWay said:
How did you end up fixing this issue? I am having the same problem.
Click to expand...
Click to collapse
Did you read the whole post or just the title?
Sent from my HTC Desire using XDA Premium App
Mine won`t work with my Panasonic plasma, works fine with my no name LCD TV
Mine worked great on 3 different projectors
Hdmi problem
I couldn't get my TF to work on my Sony Bravia TV. I loaded Clemsyn's kernel (v17) and it now works fine.
clemsyms kernal works for me using 50"panasonic plasma
I don't see how one rom works better than stock on hdmi unless something specific has been added or changed in reference to it. Is that what you are saying?
I do know pluging in the mini hdmi connector into the TF firmly was the difference between it working or not working on my sammy. BTW it looks great and surfing the internet on my TV has taken on a lot greater meaning since. Lots better than my lame PS3's browser
I had the same problem hooking up to my dad's tv, not completely sure of the brand of it. Samsung or Sharp.
Anyway, it would not work on any of the 3 hdmi inputs that were not being used up, so I tried plugging it into the input where his dtv recorder box was connected, and it worked.
Not sure if the tv had a setting in the setup menu's that would have made it work but I couldn't find anything that would have made it work on the other hdmi inputs. I had 3 different cables with me that I tried so that wasn't part of the problem.
I also remember the tablet was saying it was connected to hdmi but there was no video or audio on the tv on the other 3 inputs. Very strange. Works great on my LG I woulda been on one of the 3.1 unrooted asus updates at the time.
that's my experience with hdmi not working, hopefully it helps someone, someday
where is the solution?????
A solution has already been given above. The clemsyn kernel has a fix. Other than that you'd have to wait for a fix from ASUS
Sent from my mopho
but if i install clemsyn kernel i lost all my data, the kernel reset all the tablet?
thanks
????? some help?
You wont lose any of your data. Just flash it via CWM Recovery without wiping/formatting.

[Q] HDMI & Samsung LE46M87BDX/XEU TV

I am having a problem with connecting to my TV via HDMI. When I connect my Xoom to my TV via HDMI, after about 5 seconds the Xoom freezes and I have to restart the Xoom.
It freezes but the picture is still output to the TV, though obviously I cannot do anything with it.
I know the problem lies with my TV as I have tried the Xoom connected to other TV's via HDMI and it works fine.
I have tried it with Anynet+ (HDMI-CEC) set to both On & Off, also tried connecting with the TV Off and On.
It did work 1 time and I had no problem with it all evening, came back the next day and it froze again.
I am connecting using a Micro-HDMI to HDMI adapter to connect a full size HDMI cable to the Xoom. I have tried multiple HDMI cables and connected using the same cables to a different TV to make sure the cables were not the problem, but it worked fine.
I have also tried connecting via the HD Speaker Dock with the same results.
I am running the Tiamat 2.2.2 "Moray" Rom with the 1.4.3 Rouge "Rana" Kernal
Any help or pointers would be greatly appreciated as I'm starting to pull my hair out and I really cant afford to loose anymore
Have you tried a different HDMI port?
brandogg said:
Have you tried a different HDMI port?
Click to expand...
Click to collapse
Yep, tried all 3 HDMI ports
how far is the xoom from the tv? i had a problem with the xoom's screen not responding, noticed that the plasma tv's heat emissions were screwing with the touch screen.
Thanks for the responses I have got it working now.
I installed the Eos ICS ROM and it worked fine, so reinstalled the Tiamat 2.2.2 "Moray" Rom and its working. Maybe an app that I had installed was causing the problem, I will find out over the next few days as I reinstall my apps.

TV out cable 3.5mm jack. not working

ok, i bought this cable and it didn't work, the audio is working but the video doesn't it's messed up, and when i open some application, it will completely stop on working. here's the pictures of it.:
This what happens on the TV
This is the cable
Back part of the cable's box
so how do i do with this problem? or it's not a working version for my SGS i9000?
i am having the same problem, tv out not working i am on slim ics 3.2 with stock kernel.. i checked my cable is fine (i checked it on other vibrant and tv out was working) but not in my i9000 any solution?
Idk. I'm on slim 3.1 and semaphore 1.0.0sbm. Check the first picture link if the problem is just like yours.
Sent from my GT-I9000 using xda premium
try using the cable on another TV, once I tried mine (original nokia cable) on some tv and got currents from it and the device acted weird..
guy7685 said:
try using the cable on another TV, once I tried mine (original nokia cable) on some tv and got currents from it and the device acted weird..
Click to expand...
Click to collapse
The device didn't act weird, only the messed up screen on tv. Our tv is 32" flat screen philips. Xbox and other gadgets works fine.. I'll try it on other tv later.
Sent from my GT-I9000 using xda premium
Is the sound weird too? Try swithing PAL and NTSC modes. Try swithing one of the audio cables (red, white) with the video (yellow) cable.
Are you sure TV out works on slim ICS? If you wanted to be sure you could try flashing a stock rom, (not sure if any ICS rom supports it)
got exactly the same problem with exactly the same cable and 100% the same outcome. im on slim 3.3 with semaphore 1.0s
had the same problem way back with 2.3.x with darkyrom.. didnt care then but i do care now.. so how to solve this ^^
I tried it with other tv. With non flat screen, also philips brand. Doesn't also work the sound is just working but not the video, sound is not that good compare to phone itself and or speaker. I will try to change rom, I'll go back to stock, but i care about my temple run data. Because when i backed it up, and then came ics.. i restore app+data but the game was restarted. :/
I tried switching the red yellow and white cable. Doesn't work either. On slim ics, the tv out was option to enable/disable was working correctly but not on the tv itself. It could detect when the cable is plugged in. That was on galaxy s settings app on ics.
Sent from my GT-I9000 using xda premium
Wololo7 said:
Is the sound weird too? Try swithing PAL and NTSC modes. Try swithing one of the audio cables (red, white) with the video (yellow) cable.
Click to expand...
Click to collapse
The sound is not that good compared to phone itself and or speaker. Tried to switch cables Doesn't work. :/
Sent from my GT-I9000 using xda premium
When I tried using a cable made for camcorders with my phone I got a similar
result.
My best guess is that the camcorder cables have a slightly different connector than the ones used with smart-phones, probably because the phone's video and audio jack is the same so it has to work a little differently.
I did manage to get it working though, by pulling the connector slowly out of the phone's jack and wiggling it a bit I got a clear picture, but doing so you lose one of the audio channels.
Good luck!
i made it work. you can either order the original samsung cable (not a camcorder one but the phone one) or i heard the Nokia CA-75U works too. the nokia one is about 2€ here where the samsung is 10€..
but fml, it works.
Has the cable ever worked to your knowledge? Have you ever used a different one?
I got one of these:
http://www.ebay.co.uk/itm/370496876842?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
and it works on CM9, AOKP, CM7 (basically all the ROMs I have flashed)
I got the same results as the OP when I first tried to do TV out but that was with a cable I already owned that came with a camcorder...
Bottom line is it will only work with a cable that is wired for the SGS (like the one I've linked to)
TV Out Not working Galaxy I9000M
Did you or anyone find a solution yet? TV out used to work on my unit, but now doesn't -- tried all the suggestions below, different cables, switching around, same TV,
Ed
I have got a Nokia TV out cable (from N900) working with Samsung I9000, worked well in stock 2.3.6, CM9 and now Slim 3.7.
No problem for me
I cut 3.5 jack from headhones and use standard composite cable, first have trouble withe mess picture on tv but just need point right connects (try all combination) and voila all works (sry for bad english).
trut said:
I cut 3.5 jack from headhones and use standard composite cable, first have trouble withe mess picture on tv but just need point right connects (try all combination) and voila all works (sry for bad english).
Click to expand...
Click to collapse
Thanx for the suggestion , will try soon..
Make sure your ROM supports TV out.
poor image
Hello,
I am using 3.5 jack sometimes. But, that is not good show. Maybe, hdmi cable is good show.:angel:

[Q] MHL to HDMI Adapter not working?

I've bought a Digitazz MHL To HDMI Adapter, but no mater which ROM I try, no matter whether I try to connect my Sensation to my laptop or my TV......nothing happens.
I don't get any notification on the phone, nothing on the TV...arghhh, the frustration.
I know the HDMI cable i'm using is fine, as links up to my freeview box ok, blu-ray player ok and my TV.
Phone is plugged in and show as charging when my phone is linked up to TV.....tried retarting phone, different Sense 3.6 Roms etc..nothing is working.
Am I not doing something, or it it prob just a case of cheap rubbish MHL to HDMI adapter I bought?
Just HTC versions of the adapter work?
any Ideas...be very much appreciated as i've tried everything.
cheers
Matt
Attached pics of the MHL to HDMI I'm using.
I used 2 types of non htc adapters, both worked.
What power supply did you connect to the adapter? I think only 1a 5v will work for mhl..
Sent from my HTC Sensation using xda premium
In some roms HDMI will not work. Look in change log it will tell you if it's working or not. Usually its written in BUGS section. Check your current Rom to see if it's supported . If I remember correctly most don't work but you need to check and see if that could be the issue.
Sent from my HTC Sensation 4G using xda premium
realsis said:
In some roms HDMI will not work. Look in change log it will tell you if it's working or not. Usually its written in BUGS section. Check your current Rom to see if it's supported . If I remember correctly most don't work but you need to check and see if that could be the issue.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
MHL works on all the largely adopted roms, elegancia, ARHD etc.
Also, it's more a kernel thing than a rom actually.
The OP mentioned a couple of roms were tested. perhaps it would benefit the test to add stock as well just in case?
Sent from my HTC Sensation using xda premium
I'm also struggling with MHL on my Sensation. After searching the internet, the few tips I picked up that worked for others are:
1. You need to plug in power via the extra micro-USB port on the MHL adapter. Some have said that it needs a high-current power source (1A) which the HTC charger produces. 3rd party USB chargers sometimes output a lower current which some people find causes their MHL not to work. Also, using MHL seems to drain battery pretty quick and you need a high-amp power source to keep the phone charged or prevent it from draining too quickly.
2. If it is the first time using MHL, try plugging in the MHL(USB) to the phone then rebooting the phone. This is supposed to make your phone recognize and "activate" the MHL/HDMI capability(?).
3. I also read about playing around with TV settings. For one user with a Sony Bravia TV, he had to go to the tv settings -> external inputs -> HDMI and turn off HDMI device control or something.
4. Not all Sensation ROMs support MHL, for example CyanogenMod.
In my case, I bought a 3rd party MHL adapter and it didn't work the first time even with power connected to MHL. Then after (2) above, I finally saw the HDMI logo appear on the notification bar and it worked pretty well in my first 10mins of experimenting...nice picture with sound too. Then I tried playing another video and this time there was no sound from the TV. So I unplugged and reconnected the MHL connector from my phone and ever since then I have not been able to get MHL to work I'm using ARHD 3.6.1 ROM so I'm not sure if that is the problem. Still looking for solutions...
You might want to make sure that your TV actually supports MHL as not all do. I can't see how a laptop would support it, most don't even have a HDMI input?
The most trouble I've ever had with MHL is the sound sometimes doesn't work, but just unplugging then replugging the phone cures this.
BMamba550 said:
....
In my case, I bought a 3rd party MHL adapter and it didn't work the first time even with power connected to MHL. Then after (2) above, I finally saw the HDMI logo appear on the notification bar and it worked pretty well in my first 10mins of experimenting...nice picture with sound too. Then I tried playing another video and this time there was no sound from the TV. So I unplugged and reconnected the MHL connector from my phone and ever since then I have not been able to get MHL to work I'm using ARHD 3.6.1 ROM so I'm not sure if that is the problem. Still looking for solutions...
Click to expand...
Click to collapse
I finally managed to solve my MHL problem by flashing ARHD 3.6.8 ROM...so in my case it seemed to be the ROM version that didn't work well with MHL. It mirrors my phone screen pretty well although Sensation resolution is quarter-HD so on my HD TV the picture is less sharp, but acceptable.
boomboomer said:
You might want to make sure that your TV actually supports MHL as not all do. I can't see how a laptop would support it, most don't even have a HDMI input?
The most trouble I've ever had with MHL is the sound sometimes doesn't work, but just unplugging then replugging the phone cures this.
Click to expand...
Click to collapse
I have this same problem, my adapter works and shows on my phone that it connected but my TV does not support MHL as only certain TV's actually support this standard, and oh plus that fact that my current ROM doesnt support it
My Laptop has a HDMI connection and so does my HD TV....but didn't know the TV had to support MHL....I just thought it was a case of if it's a HD TV, with HDMI connections, then it would work?
Hmmm....I'm not getting ANYTHING in my notification area on my phone either though.
Gonna try some of these suggestions and will report back.
Ps: As far as Chargers and power sources etc...all mine are HTC Genuine ones.
Thanks for help guys....will be back soon, coz i'm off to experiment..hehe:laugh:
Matt
matthew33 said:
My Laptop has a HDMI connection and so does my HD TV....but didn't know the TV had to support MHL....I just thought it was a case of if it's a HD TV, with HDMI connections, then it would work?
Hmmm....I'm not getting ANYTHING in my notification area on my phone either though.
Gonna try some of these suggestions and will report back.
Ps: As far as Chargers and power sources etc...all mine are HTC Genuine ones.
Thanks for help guys....will be back soon, coz i'm off to experiment..hehe:laugh:
Matt
Click to expand...
Click to collapse
Hope all goes well in your test's, My process was to power up the adapter first using my genuine htc charger first then plus in the HDMI cable from the adapter to the TV then plug the adapter into the phone last. If it does not show up on the phone notification bar to begin with restart your phone with it all still plugged in failing all of that then time for a new ROM and kernel probably Good luck
hoaxy32 said:
Hope all goes well in your test's, My process was to power up the adapter first using my genuine htc charger first then plus in the HDMI cable from the adapter to the TV then plug the adapter into the phone last. If it does not show up on the phone notification bar to begin with restart your phone with it all still plugged in failing all of that then time for a new ROM and kernel probably Good luck
Click to expand...
Click to collapse
Cheers for reply, but tried differerent Roms and kernels...nothing happening.
I give up.
Matt
I've got a similar problem where not matter what ICS ROM or kernel I used it wouldn't work.
(see http://forum.xda-developers.com/showpost.php?p=31797423&postcount=17)
However, in my case, it works fine with GB connected to a Sharp TV, but for some reason not ICS!
It also works fine with ICS connected to other TVs (tested on Samsung and LG) and on a PC monitor (through HDMI to DVI cable).
Just not with the Sharp TV!
Very frustrating!
hey guys, i have been trying to get this to work but all to no avail have tried the suggestions, all of the kernels i can find ect but i am just not having any luck. i am also not having any joy with usb-otg. could the 2 be linked?
Just a couple of thoughts. I've only skimmed the thread so I apologise if I'm repeating something mentioned earlier.
I can confirm that NRG's current EnergyROM which features a stock kernel and Sense 3.6 works with MHL (at the moment MHL doesn't work on any Sense 4 ROMs as far as I'm aware).
Also, I recently visited my folks and tried to show off some photos on their TV. For some reason MHL would only work on ONE of its four HDMI ports. I didn't have the time to figure out why, but there you go. Maybe those having difficulties could visit a tv shop and try plugging their phone into a variety of tvs for troubleshooting purposes.
Other things to note: On some TVs my MHL connection works at 720p and 60hz (which is good). On others it runs at 1080i at 24hz which makes for a crappy experience (jerky).
ICS ROMs have greatly improved performance when using MHL so steer clear of gingerbread.
MIUI ROMs should also support MHL (I've tried a couple).
Finally, I sometimes use a battery pack that I bought via Amazon to power the MHL connection when I'm out and about. If you decide to experiment this way, make sure you buy an external battery that has a 1 amp output per USB port.
I'm typing this with a bluetooth keyboard while my phone is connected to my tv, so it can work : ) I bought this MHL adapter: http://www.amazon.co.uk/FoneM8-MHL-Cable-microUSB-HDMI/dp/B0060Z8CYK
---------- Post added at 12:09 AM ---------- Previous post was at 12:03 AM ----------
heavy_metal_man said:
hey guys, i have been trying to get this to work but all to no avail have tried the suggestions, all of the kernels i can find ect but i am just not having any luck. i am also not having any joy with usb-otg. could the 2 be linked?
Click to expand...
Click to collapse
I've only tried USB on the go once, using a dedicated USB on the go cable for a Galaxy SII and a small externally powered four port hub in conjunction with Sebsatian FM's kernel and the most recent EnergyROM. I was able to browse a flash drive and connect a wireless keyboard and mouse. I couldn't really see the point as you can't use MHL at the same time, and you have to provide external power (unlike, for example, the Galaxy Note which will allow you to plug flash drives etc into the adapter without external power).
Ouzo said:
Just a couple of thoughts. I've only skimmed the thread so I apologise if I'm repeating something mentioned earlier.
I can confirm that NRG's current EnergyROM which features a stock kernel and Sense 3.6 works with MHL (at the moment MHL doesn't work on any Sense 4 ROMs as far as I'm aware).
Also, I recently visited my folks and tried to show off some photos on their TV. For some reason MHL would only work on ONE of its four HDMI ports. I didn't have the time to figure out why, but there you go. Maybe those having difficulties could visit a tv shop and try plugging their phone into a variety of tvs for troubleshooting purposes.
Other things to note: On some TVs my MHL connection works at 720p and 60hz (which is good). On others it runs at 1080i at 24hz which makes for a crappy experience (jerky).
ICS ROMs have greatly improved performance when using MHL so steer clear of gingerbread.
MIUI ROMs should also support MHL (I've tried a couple).
Finally, I sometimes use a battery pack that I bought via Amazon to power the MHL connection when I'm out and about. If you decide to experiment this way, make sure you buy an external battery that has a 1 amp output per USB port.
I'm typing this with a bluetooth keyboard while my phone is connected to my tv, so it can work : ) I bought this MHL adapter: http://www.amazon.co.uk/FoneM8-MHL-Cable-microUSB-HDMI/dp/B0060Z8CYK
---------- Post added at 12:09 AM ---------- Previous post was at 12:03 AM ----------
I've only tried USB on the go once, using a dedicated USB on the go cable for a Galaxy SII and a small externally powered four port hub in conjunction with Sebsatian FM's kernel and the most recent EnergyROM. I was able to browse a flash drive and connect a wireless keyboard and mouse. I couldn't really see the point as you can't use MHL at the same time, and you have to provide external power (unlike, for example, the Galaxy Note which will allow you to plug flash drives etc into the adapter without external power).
Click to expand...
Click to collapse
thank you for your chip in pal but i am still having no joy, jumped straight to the latest energy rom, installed and hooked up but no joy. i have tried both ports, rebooting with the cable in, different power sources. nothing. im beginning to think its gonna be my phone i will test this out when i get into work, as we have a hd tv there as well (allowing i get the time ) but im starting to lose hope would be so epic to be able to put my emulators onto the big screen and have goldeneye mulitlpayer matches at lunch in work
heavy_metal_man said:
thank you for your chip in pal but i am still having no joy, jumped straight to the latest energy rom, installed and hooked up but no joy. i have tried both ports, rebooting with the cable in, different power sources. nothing. im beginning to think its gonna be my phone i will test this out when i get into work, as we have a hd tv there as well (allowing i get the time ) but im starting to lose hope would be so epic to be able to put my emulators onto the big screen and have goldeneye mulitlpayer matches at lunch in work
Click to expand...
Click to collapse
That's weird. Got any mates with MHL enabled phones you can try your adapter on? I hate problems like this, they drive you mad and you end up doubting pretty much everything you've tried. Seriously though, you do realise MHL only works on the third Thursday of the month and if you wear underpants on your head, yeah? Oh, and stand on one leg ; ) Good luck.
Other than trying that different tv at work and possibly a different HDMI cable and MHL adapter, I'm not sure what else to suggest.
Ouzo said:
That's weird. Got any mates with MHL enabled phones you can try your adapter on? I hate problems like this, they drive you mad and you end up doubting pretty much everything you've tried. Seriously though, you do realise MHL only works on the third Thursday of the month and if you wear underpants on your head, yeah? Oh, and stand on one leg ; ) Good luck.
Other than trying that different tv at work and possibly a different HDMI cable and MHL adapter, I'm not sure what else to suggest.
Click to expand...
Click to collapse
its definately beginning to feel like that. my friend in work has an gs2, which i believe is mhl enabled. so tomorrow when i get into work i will try steal hm and the hdtv in work and see if i can get anywhere. at this point its either my £230 hdtv ()
my £360 phone () or my ****ty as mhl adapter from ebay /)
i guess we shall see tomorrow :/ will be gutted if its the phone. just out of interest has anyone got this going on the XE version of the sensation? as this is what i have.
still, thanks for your input bruce said that he is going to look into fixing the mhl on his CMX nightly, so if we can get this going i will be in emulator heaven
(off topic but XDA just censored me =0 automatically =O)
heavy_metal_man said:
its definately beginning to feel like that. my friend in work has an gs2, which i believe is mhl enabled. so tomorrow when i get into work i will try steal hm and the hdtv in work and see if i can get anywhere. at this point its either my £230 hdtv ()
my £360 phone () or my ****ty as mhl adapter from ebay /)
i guess we shall see tomorrow :/ will be gutted if its the phone. just out of interest has anyone got this going on the XE version of the sensation? as this is what i have.
still, thanks for your input bruce said that he is going to look into fixing the mhl on his CMX nightly, so if we can get this going i will be in emulator heaven
(off topic but XDA just censored me =0 automatically =O)
Click to expand...
Click to collapse
The SII is definitely MHL enabled (well on the stock ROM at any rate) - I hope it doesn't work so at least then it's hopefully just a £10 mhl adapter and not the phone or tv ; )
Ouzo said:
The SII is definitely MHL enabled (well on the stock ROM at any rate) - I hope it doesn't work so at least then it's hopefully just a £10 mhl adapter and not the phone or tv ; )
Click to expand...
Click to collapse
OK so apparently plugging my phone in at work counts as theft of electricity and I can get sacked for it
So I may take longer to find a HDTV and another test device :banghead:
Sent from my HTC Sensation using xda premium
heavy_metal_man said:
OK so apparently plugging my phone in at work counts as theft of electricity and I can get sacked for it
So I may take longer to find a HDTV and another test device :banghead:
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
LOL, you must work for the NHS or local government or something. Still, you made my girlfriend and I laugh : ) Maybe try a Currys or a Richer Sounds or something. There's bound to be someone in there with a decent smartphone, and there will be plenty of TVs to try too! If they haven't got a clue what you're on about, you might just educate them a bit ; )

[Q] No HDMI output whatsoever

As we all know, since the new update to JellyBean 4.2 HDMI has been a problem. Before the update, I had minimal issues and HDMI worked perfect. After the update, HDMI output worked except no sound (like everyone else). A few months later, Asus finally put out a fix for this issue and my HDMI started to work again. 2-3 months later, my TF300 will not even output any picture or sound through HDMI. It was working fine on my Philips TV and then it just stopped one day. I've tried different TVs, new HDMI cord, factory reset, cold start, turning on and connecting the cord and TV in certain orders. Still nothing! I have enjoyed my tablet just this HDMI is a big problem. Anyone have a fix or heard of anything new to come from Asus? Please Help
Rrjr6 said:
As we all know, since the new update to JellyBean 4.2 HDMI has been a problem. Before the update, I had minimal issues and HDMI worked perfect. After the update, HDMI output worked except no sound (like everyone else). A few months later, Asus finally put out a fix for this issue and my HDMI started to work again. 2-3 months later, my TF300 will not even output any picture or sound through HDMI. It was working fine on my Philips TV and then it just stopped one day. I've tried different TVs, new HDMI cord, factory reset, cold start, turning on and connecting the cord and TV in certain orders. Still nothing! I have enjoyed my tablet just this HDMI is a big problem. Anyone have a fix or heard of anything new to come from Asus? Please Help
Click to expand...
Click to collapse
When you connect the HDMI cable to the tablet do you get the HDMI notification? or you no longer get anything at this point?
[email protected] said:
When you connect the HDMI cable to the tablet do you get the HDMI notification? or you no longer get anything at this point?
Click to expand...
Click to collapse
The tv recognizes the HDMI input but when it switches over, there is no signal, no picture, nothing....The tablet use to give me a HDMI icon (when it worked) but not anymore.
Rrjr6 said:
The tv recognizes the HDMI input but when it switches over, there is no signal, no picture, nothing....The tablet use to give me a HDMI icon (when it worked) but not anymore.
Click to expand...
Click to collapse
Can you tell me which version you are currently on? If previous version were working better you can always go the Asus site and download older version.
[email protected] said:
Can you tell me which version you are currently on? If previous version were working better you can always go the Asus site and download older version.
Click to expand...
Click to collapse
I'm on 4.2.1 build 10.6.1.27.1 20130711
The weird part is before I updated to the newest build the HDMI worked then when I checked for a new update it stopped. I installed the new update and it hasn't worked since.

Categories

Resources