[Q][Urgent] "Zeus Flash Device" > hardbrick? - Sony Xperia Miro, Tipo (Dual), J, E

Excuse me in advance, for some reason XDA won't save it when I put an enter in this message, it pasted everything into one big text. It's hard and annoying to read. I'm sorry!
Edit: fixed it by typing HTML codes
A few weeks ago I ordered a (micro) SD-card in China, it arrived two days ago.
I backed up the internal storage and external SD from my phone, then replaced the ext-sd with the new Chinese 32gb card, and switched the internal and external memory as per @TeamMex 's thread.
(Of course using the CM10 mountpoints as I was on the PureCyanogenmod+ ROM).
Then I tried to restore my apps with TitaniumBackup, but I found out that the apps now installed on the SD (the 32gb Chinese card that is mounted as internal storage) kept disappearing after a reboot, having me to restore them again.
This also happened most of the time with reinstalling via playstore, and then restoring the data via TiBu.
I figured it might be a disk issue, so I tried fixing the sdcard with windows disk repair, and even linux' "dosfsck", but nothing really happened and the card kept acting strange.
So I was trying to correctly format it via the phone itself, but then it didn't mount anymore. I decided to pull out the card and restore it via a card-reader, hoping that would finally work, so I pulled the battery out of my phone, and pulled the card out.
And now here it comes: I tried to turn on my phone, but it didn't do anything, no led, no screen, no vibration.
I decided to plug it to my PC to see if it did anything, but the phone itself did nothing.
Yet, although I didn't click anything on the phone, the PC started to install drivers, later they turned out to be called "ZEUS flash device" drivers.
As far as I found on google up till now, I've read that means I probably have a hard brick.
Is there any other reason for my phone to list the "ZEUS flash device" drivers or not?
Anyway to restore my phone from here, as it still installs drivers to my PC, meaning there must be some tool that can flash something to it, or is it dead?
I hope someone can help me or explain more of my situation.
Phone: Sony Xperia Tipo, ST21i
ROM: PureCyanogenmod+
PC OS: Windows 7 & Ubuntu 12.10 dual-boot
Thanks in advance,
Regards, Drago

Dragoboss said:
Excuse me in advance, for some reason XDA won't save it when I put an enter in this message, it pasted everything into one big text. It's hard and annoying to read. I'm sorry! A few weeks ago I ordered a (micro) SD-card in China, it arrived two days ago. I backed up the internal storage and external SD from my phone, then replaced the ext-sd with the new Chinese 32gb card, and switched the internal and external memory as per @TeamMex 's thread. (Of course using the CM10 mountpoints as I was on the PureCyanogenmod+ ROM). Then I tried to restore my apps with TitaniumBackup, but I found out that the apps now installed on the SD (the 32gb Chinese card that is mounted as internal storage) kept disappearing after a reboot, having me to restore them again. This also happened most of the time with reinstalling via playstore, and then restoring the data via TiBu. I figured it might be a disk issue, so I tried fixing the sdcard with windows disk repair, and even linux' "dosfsck", but nothing really happened and the card kept acting strange. So I was trying to correctly format it via the phone itself, but then it didn't mount anymore. I decided to pull out the card and restore it via a card-reader, hoping that would finally work, so I pulled the battery out of my phone, and pulled the card out. And now here it comes: I tried to turn on my phone, but it didn't do anything, no led, no screen, no vibration. I decided to plug it to my PC to see if it did anything, but the phone itself did nothing. Yet, although I didn't click anything on the phone, the PC started to install drivers, later they turned out to be called "ZEUS flash device" drivers. As far as I found on google up till now, I've read that means I probably have a hard brick. Is there any other reason for my phone to list the "ZEUS flash device" drivers or not? Anyway to restore my phone from here, as it still installs drivers to my PC, meaning there must be some tool that can flash something to it, or is it dead? I hope someone can help me or explain more of my situation. Phone: Sony Xperia Tipo, ST21i ROM: PureCyanogenmod+ PC OS: Windows 7 & Ubuntu 12.10 dual-boot Thanks in advance, Regards, Drago
Click to expand...
Click to collapse
uhmm try using other SD card and other usb port,
maybe ur sd card was damaged since you sent it
flashtools is used to repair the phone, if that does not work you will have to go to a technician to use medussa box
cheers.

either medusa or setool box, setool also has the bootloader specifically for this qualcomm chipset, so you can reflash if you have access to a setool box.

Steam. said:
either medusa or setool box, setool also has the bootloader specifically for this qualcomm chipset, so you can reflash if you have access to a setool box.
Click to expand...
Click to collapse
i got same problem with my xperia v , sane exactly , where can i download SETool Box ? i downloaded SETOOL and it didnt detected my device please help, thanks

iSpammer said:
i got same problem with my xperia v , sane exactly , where can i download SETool Box ? i downloaded SETOOL and it didnt detected my device please help, thanks
Click to expand...
Click to collapse
It's only purchasable.
Sent from my HTC Desire HD using Tapatalk

Related

Flashed Raphael and now the files on the SD card are gone

I flashed to the newest build and now nothing shows up in my storage card....on the phone and through device center. I tried reverting back to the previous build, but still nothing is there. When I plug it in to device center, the storage card is recognized and it says that it does have memory used on it, but there are no files to be seen in the explorer on the phone and on the device center. Any help please?
maxima00se said:
I flashed to the newest build and now nothing shows up in my storage card....on the phone and through device center. I tried reverting back to the previous build, but still nothing is there. When I plug it in to device center, the storage card is recognized and it says that it does have memory used on it, but there are no files to be seen in the explorer on the phone and on the device center. Any help please?
Click to expand...
Click to collapse
anytime you flash, you are suppose to remove the sd card cause it wipes out everything on the phone and card, sorry to say but your stuff you had on your sd card is gone.
Out of everytime I have flashed roms on a phone, this has never happened. The thing is that the sd card still says it's half full which shows me there is still data, but I just can't see it.
maxima00se said:
Out of everytime I have flashed roms on a phone, this has never happened. The thing is that the sd card still says it's half full which shows me there is still data, but I just can't see it.
Click to expand...
Click to collapse
Ive never seen that flashing deletes files on sd, too and i flashed a lot of times, always with sd- and sim card in the TP.... Try to rescue data on the card with Norton Utilities ... i ve had good experiece with sd cards from a camera that i could save the data on it. Did you try progs like pocket mechanic?
Greetz &good luck
Boris
I tried some of those tools and other recovery tools as well and nothing. Anyone else have anymore information on this?
I think you get the disappearing card when you have mis-matching FAT tables (it's happened to me before). I suspect that you had a growing problem and that the flash was just a coincidence and not the cause. You should try the demo version of Wizcode Scandisk and see if it can fix the issue. The also have a data recovery app, but that could be more trouble than it's worth (I think it recovers files but not file names-sounds like hell to me, lol).
Thanks, I'll give it a shot and if that doesn't work then I guess I will just format it

Having trouble connecting to PC ( tried 3 differnt USB driver)

Update:
Stock update.zip needed!!
or, does those mod update.zip helps too ?
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Look for drivers only maybe different bit than your pc
Try just the sd.card in your.computer
Usb.debuging
Sent from my SGH-T959V using XDA Premium App
patpat09 said:
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Click to expand...
Click to collapse
Did you install the drivers found on the "how to root galaxy s4g and deleting fota files" thread in the development forum?
Sent from my SGH-T959V using Tapatalk
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
golmar88 said:
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
Click to expand...
Click to collapse
This happened to me also, with a kodak cable.
Sent from my SGH-T959V using Tapatalk
golmar88 said:
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
Click to expand...
Click to collapse
+2 I had this issue before.
Thankyou for all the answers, I've used 3 different drivers, 1 from Kies, 1 from that Noob root guide, and one from somewhere i forgot.
I also used 3 different micro usb cable, HTC, MOTO, and samsung.
I went to Tmobile, plug in one of their sgs4g in my laptop, works perfectly, so not my laptop and not my cable.
Then i tested, my phone is not rooted yet with root checker, when I install superuser, it gave me an error msg saying that su binary file has a problem, It disappear before i write it down. and it said it copied that su binary on my sd card and tell me to reboot into recovery mode and install it.
I dont know how, and i guess that means a hard reset? I used that vol up+down and power buttom.Then I clicked reinstall packages, big discovery!
I found out that "E;/fail to open.mnt/internal_d/update.zip(No such file or direstory)
Man.... somehow that update.zip isn't there!!!
Anyone could point me to a place to download it? or simple upload me or send one to me email [email protected]
Again thank you for all the comments!
patpat09 said:
Update:
Stock update.zip needed!!
or, does those mod update.zip helps too ?
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Click to expand...
Click to collapse
Have you installed the driver's from Samsung yet?
Additionally, when you plug the USB cord in, what happens on your phone? Do icon's show up, up top? Nothing happens?
Have you tried to go into Settings>Applications>Development and made sure USB Debugging is on?
Now if you have tried a standard SGS4G from the TMO Store on your laptop and it worked, you might have gotten a bad deal buying that one used. Something might be jacked up on it.
Additionally, if it's unmodified which it sounds like it is,
Just go to Settings>Privacy>Factory Data Reset.
That will put you back to the original state.
joedeveloper said:
Have you installed the driver's from Samsung yet?
Additionally, when you plug the USB cord in, what happens on your phone? Do icon's show up, up top? Nothing happens?
Have you tried to go into Settings>Applications>Development and made sure USB Debugging is on?
Now if you have tried a standard SGS4G from the TMO Store on your laptop and it worked, you might have gotten a bad deal buying that one used. Something might be jacked up on it.
Additionally, if it's unmodified which it sounds like it is,
Just go to Settings>Privacy>Factory Data Reset.
That will put you back to the original state.
Click to expand...
Click to collapse
No icon show up.
Something is missing from the phone, i did the factory reset both soft and reinstall package in Recovery/ delete all user data, still no help.
When i use root checker, it tells me there is no su binary in system/bin
Superuser created one for me to the SD card, but es file explorer wont copy it into system/bin for me, and in recovery mode, it just say no update.zip exist in internal SD
patpat09 said:
No icon show up.
Something is missing from the phone, i did the factory reset both soft and reinstall package in Recovery/ delete all user data, still no help.
When i use root checker, it tells me there is no su binary in system/bin
Superuser created one for me to the SD card, but es file explorer wont copy it into system/bin for me, and in recovery mode, it just say no update.zip exist in internal SD
Click to expand...
Click to collapse
I'm not sure what would have been deleted off the phone to prevent the USB from working on your computer. Either way, you're kinda out of luck if it won't even connect to the computer.
Only other solution would be to download the stock ROM in the form of update.zip from your phones web browser, save to SD, then reboot into recovery and choose the second option.
The reason why update.zip is missing is because you haven't put it on your SD card. You typically download any zipped ROM, rename it to update.zip and then put it in the root of your SD.
Since you can't connect to the computer you'd have to download from a browser.
joedeveloper said:
I'm not sure what would have been deleted off the phone to prevent the USB from working on your computer. Either way, you're kinda out of luck if it won't even connect to the computer.
Only other solution would be to download the stock ROM in the form of update.zip from your phones web browser, save to SD, then reboot into recovery and choose the second option.
The reason why update.zip is missing is because you haven't put it on your SD card. You typically download any zipped ROM, rename it to update.zip and then put it in the root of your SD.
Since you can't connect to the computer you'd have to download from a browser.
Click to expand...
Click to collapse
Very usefull Info!!
I'm downloading that Stock DEODEXED KC1 now. But it's in Mc5
So, i just zip it right?
Luckily I could still take the sd card out and use a card reader to load stuff on it.
Mainly i want the connection to the pc for rooting.
Moreover, the Root checker says i already have Busybox installed, does it mean, the previous owner might have tried to or did rooted, but unroot it ?
That one doesnt work, so I tried another one which it states its completely stock (T959VUVKC1-REV00-ALL-low-CL933594.tar)
But still both turns out "E: signature verification failed"
any idea?

[Q] USB Mass storage mode not working after root

After the root procedure I don't seem to have any ability to use USB Mass storage.
Windows reports it as an empty drive, linux will show the device as connecting and assigns it a /dev/sdx device, but when you attempt to mount or fdisk, it reports no medium.
Any one else having similar issues?
I could always try a reset to factory defaults after unrooting, but I really don't see what rooting could have done.
I used the manual method and had to run zerg several times, however beyond that no other files where modified.
I've already reverted /data/local.prop to stock, no help.
Any one have any other insights?
I had to uninstall motohelper to get USB mass storage working.
Sent from my MB865
thekurrgan said:
After the root procedure I don't seem to have any ability to use USB Mass storage.
Windows reports it as an empty drive, linux will show the device as connecting and assigns it a /dev/sdx device, but when you attempt to mount or fdisk, it reports no medium.
Any one else having similar issues?
I could always try a reset to factory defaults after unrooting, but I really don't see what rooting could have done.
I used the manual method and had to run zerg several times, however beyond that no other files where modified.
I've already reverted /data/local.prop to stock, no help.
Any one have any other insights?
Click to expand...
Click to collapse
When you take a picture, does it save to your sdcard? Sounds completely unrelated huh? Well, this phone seems to have an issue with the sdcard randomly becoming read only. I have had that issue multiple times now and usually it's solved by restarting the phone. Well, I seen your issue today and didn't remember if I had tried to use it as mass storage since rooting it so I tried....no luck. Took a pic, it looked like it saved, didn't get any error, but could not find the pic in my gallery. Then I tried to take a screenshot and got the read only error. So I just took my sdcard out and made a copy of it to my pc, put it back in and rebooted my phone, it's all good now, imagine that. Needless to say, i'm backing up all my apps right now before doing anything else. Then gonna backup my contacts too.
motohelper... Sounds like a stock app...
did you just rm the apk?
thekurrgan said:
motohelper... Sounds like a stock app...
did you just rm the apk?
Click to expand...
Click to collapse
No.motohelper was a bs program that got installed to my PC when I downloaded and installed the driver pack from Motorola. Until
I uninstalled it I couldn't get USB mass storage to work.phone portal would,but not storage.
Sent from my MB865
mtnlion said:
I had to uninstall motohelper to get USB mass storage working.
Sent from my MB865
Click to expand...
Click to collapse
I had to reinstall all the drivers through motohelper to get it to work as well =/
No problems now though~
I was able to get my sdcard recognized again but still could not use it as mass storage device, never had a problem with this before root. Did factory reset and all is well.
There is no possible way root caused the issue at all. It stopped working for me once I installed moto drivers, but shows the device with mass storage under it in usb portal mode.
koriflame said:
There is no possible way root caused the issue at all. It stopped working for me once I installed moto drivers, but shows the device with mass storage under it in usb portal mode.
Click to expand...
Click to collapse
Well then it's one hell of a coincidence! Before root, w/motodrivers, worked fine, after root w/motodrivers, didn't work, after unrooting, w/motordrivers, works again.
Same thing happened with my phone. Actually now returned because of all the issues I kept having hardware wise and wound up going and getting the HTC Vivid. So if any of yall switch I will see you when a Forum is made for this device.
916x10 said:
Well then it's one hell of a coincidence! Before root, w/motodrivers, worked fine, after root w/motodrivers, didn't work, after unrooting, w/motordrivers, works again.
Click to expand...
Click to collapse
Did you see my other post about /mount/secure corruption? I have a fully working rooted mountable phone.
Sent from my MB865
malickie said:
Same thing happened with my phone. Actually now returned because of all the issues I kept having hardware wise and wound up going and getting the HTC Vivid. So if any of yall switch I will see you when a Forum is made for this device.
Click to expand...
Click to collapse
I have until the 24th of this month to decide if I want to keep this phone or not. I unrooted yesterday, will see how it goes this week. I'm not trying to pay big money for a phone right now so we'll see how it plays out.
OK I give up. The problem is intermittent. I'm going to do a log cat next time cause I'm getting about irritated. SOme times it works fine some times not. I've not unrooted or changed anything since the initial problem.
The only thing I can possibly thing is that some of the commands installed by busybox is screwing up the works.
Short of that nothing REALLY changes that could affect the operation of the phone.
What doesn't bare that idea out however is the fact that it EVER works.
**STUMPED**
It does the exact same thing on a completely unmodified phone. Therefore, it's nothing you did to it that's cause the problem.
I have the same thing on mine but it was something with the format of the card.
I flipped it to windows media sync mode then backed up the card and after the backup I unmounted the card and let the atrix format it.
I had the card in a atrix 1 before I put it in the atrix 2 so I do not know if this is the case or not.
This has now been working with out a problem for 4 days now
Same thing happened to my phone, I never rooted it.
Confirmed user error.
seraphielx said:
I have the same thing on mine but it was something with the format of the card.
Click to expand...
Click to collapse
Thank you seraphielx! Shortly before finding this thead, I'd noticed that I had a rather large number of files in the LOST.DIR on my SDcard. Which coincided with the seemingly random disappearance of some of the apps I'd moved there. And when I pulled the SDcard to back it up on my PC, there were nearly 600mb worth of files in the LOST.DIR. Most of which were photos, plus (I think) some apps. Thank God I make regular backups!
I believe the problem, at least in my case, has to do with the fact that I could pull the SDcard without first pulling the battery; which I did when I swapped the stock 2gb card for my 32gb card right after I bought the phone. Thus corrupting many files, and probably the file system on the card as well.
After backing up what remained of my storage files, I tried to format the SDcard in the Atrix2, but It wouldn't let me select the option to format, and neither could I unmount the SDcard. So I powered down the phone, pulled the card and formatted it from my PC. Poped it back in the phone, powered up, and was then able to format it with the Atrix2. Since then I've had no issues with accessing usb mass storage, nor with disappearing apps and photos.
Thanx again for the assistance!
For me sometimes it takes a few minutes before I can access sdcard from PC.
Usually it works instantly after phone reboot while not plugged in pc, then it takes ages...
seeker9 said:
After backing up what remained of my storage files, I tried to format the SDcard in the Atrix2, but It wouldn't let me select the option to format, and neither could I unmount the SDcard. So I powered down the phone, pulled the card and formatted it from my PC. Poped it back in the phone, powered up, and was then able to format it with the Atrix2. Since then I've had no issues with accessing usb mass storage, nor with disappearing apps and photos.
Click to expand...
Click to collapse
Update: OK, I can't unmount my SDcard, again. Which, of course, means I can't access usb mass storage anymore. The only I've changes made since my last post were to install some apps and change some status bar icons via Rom Toolbox, and I can't believe that has anything with the issue.
If I do a factory reset, will I need to root again?
If you have any apps installed on your SD card you will continue to have problems.

[Q] Probably an easy fix, but...

My friend bought a gemini JoyTab 8112 for his son which has now stopped working. He said he tried to do something where he swapped the sd card for the external sd card by editing a file called vold.fstab. He created no backup, though I think he saved the original file (I hope).
I've got it at the moment and it will only boot when plugged in to my computer via usb. However, it shows neither internal or external sd cards and when I go to settings/storage I get a message reading 'Unfortunately, settings has stopped' I click ok, it goes back to the prior screen.
It also won't connect to my computer as a USB device so I can't use adb or Android commander to get into it.
I can enter the recovery menu so I thought I could try and install wirelessadb.apk but I really don't know how to install an apk through boot menu. I've tried reading the forums but, tbh, it's hard to understand how to create an apk to install in the recovery menu.
Any ideas would be greatly appreciated. I've looked all over for a solution and usually, anything I can't solve myself, I can find a solution here but this one is drawing a blank.
Fixed. Turned out it was a driver issue of Windows why the pads wouldn't connect. Switched to laptop and worked immediately.

Xperia E Dual Bricked

Ok, I have bricked my device a few times as I love tweaking and flashing ROMs. But , this time, I think I killed it for good.First of all, I tweaked my cm10 with vold.stab to switch sd cards. Rebooted. Internal SD card (vold.stab tweak -> external) not mounting/recognizing by the phone. I found some help articles , so I formatted the external , rebooted and now the phone is dead. If I connect to pc through flashmode or fastboot mode, Windows make the usual sound when you connect a device but it sees it as an unknown device, unable to find drivers. Phone not reacting to any button I press.I think I screwed it at last.
You shouldn't have done that. It's VERY risky. Sorry for you...
panos13 said:
Ok, I have bricked my device a few times as I love tweaking and flashing ROMs. But , this time, I think I killed it for good.First of all, I tweaked my cm10 with vold.stab to switch sd cards. Rebooted. Internal SD card (vold.stab tweak -> external) not mounting/recognizing by the phone. I found some help articles , so I formatted the external , rebooted and now the phone is dead. If I connect to pc through flashmode or fastboot mode, Windows make the usual sound when you connect a device but it sees it as an unknown device, unable to find drivers. Phone not reacting to any button I press.I think I screwed it at last.
Click to expand...
Click to collapse
by formatting the "external sd card" AFTER doing the "vold.fstab tweak" you actually formatted the INTERNAL memory and not the external... i don't think there's any way to fix it, send it to sony if you still have warranty.
-Ric- said:
by formatting the "external sd card" AFTER doing the "vold.fstab tweak" you actually formatted the INTERNAL memory and not the external... i don't think there's any way to fix it, send it to sony if you still have warranty.
Click to expand...
Click to collapse
Wait, i formatted it via the settings ,in the option above Apps. The phone thinks its the Internal Memory , but I actually deleted all the files in External SD. In other words , The REAL External sd card was formatted. The Real internal memory was unusable.
ok, im sending this to service although i think there is still hope. I did not format the phone's internal memory, but my ext card. The only sign that my phone is alive is that the Proximity Sensor is red , or active, when I connect the charger or press the power button.Also, Windows recognise it as an unknown device. So, is there surely no hope or what? Please help, so I can decide what to do. Thank you in advance.
PS: Is it sure that Customer Service can fix it without warranty?
If not under warranty, you might have to pay them to fix it for you.
Sent from my C1505 using XDA Premium 4 mobile app
This is what happens when people don't read enough about flashning and tweaking before doing it.
Think first, then do.
Hi. Same thing happened to me. I was using CM10 on my Xperia J, but I didn't change anything else in the phone except the ROM. When i got new SDcard I decided to format it using my phone. I used the format option in Settings -> Storage and wanted to reboot the phone, but it didn't turn on. I can't access fastboot or flash mode or anything, it seems completely dead. I surely lost warranty while unlocking BootLoader and installing CM10. Can I do something to unbrick it?
DyG121 said:
Hi. Same thing happened to me. I was using CM10 on my Xperia J, but I didn't change anything else in the phone except the ROM. When i got new SDcard I decided to format it using my phone. I used the format option in Settings -> Storage and wanted to reboot the phone, but it didn't turn on. I can't access fastboot or flash mode or anything, it seems completely dead. I surely lost warranty while unlocking BootLoader and installing CM10. Can I do something to unbrick it?
Click to expand...
Click to collapse
If it's less than an year old, just give it to Sony and tell them the warranty is still valid - I don't think they can check for bootloader unlock via hardware, and I'm pretty sure you wiped off all the software.

Categories

Resources