Hi All,
i have successfully rooted my Xoom and flashed [4.2.2 JDQ39 AOSP] Eos 4.0 -- Umts_Everest 167 on MZ601 along with gapps-jb-20130413-EOS-XOOM-ONLY.zip, using clockworkmod recovery 3.2.0.0 solarnz-r4c
Thanks team EOS for the same.
few queries for which i searched a lot on XDA.
1. it seems android Phone dialer is not present
2. SMS sometimes works somes times doesn't
3. i installed rom manager but it is asking to install TWRP / Clockworkmod recovery. any suggestions?
could some point me to a backup restore solution which does not ask for conformation on batch restore.
thanks,
MM
Rooted unlocked Flahsed Xoom Mz601 - 4.2.2 JDQ39 AOSP] Eos 4.0 - 167
Rooted Xperia Arc S
Rooted Iball Andi 5c chipset MT6575
mhmishra said:
Hi All,
i have successfully rooted my Xoom and flashed [4.2.2 JDQ39 AOSP] Eos 4.0 -- Umts_Everest 167 on MZ601 along with gapps-jb-20130413-EOS-XOOM-ONLY.zip, using clockworkmod recovery 3.2.0.0 solarnz-r4c
Thanks team EOS for the same.
few queries for which i searched a lot on XDA.
1. it seems android Phone dialer is not present
2. SMS sometimes works somes times doesn't
3. i installed rom manager but it is asking to install TWRP / Clockworkmod recovery. any suggestions?
could some point me to a backup restore solution which does not ask for conformation on batch restore.
thanks,
MM
Rooted unlocked Flahsed Xoom Mz601 - 4.2.2 JDQ39 AOSP] Eos 4.0 - 167
Rooted Xperia Arc S
Rooted Iball Andi 5c chipset MT6575
Click to expand...
Click to collapse
The latest ClockWorkMod for the Motorola Xoom is version 6.0.3.2. You said your version is 3.2.0.0. Try updating it and flashing everything again. Maybe that's the problem. Newer recoveries flash ROMs in a different way.
Good luck!
vitorgatti said:
The latest ClockWorkMod for the Motorola Xoom is version 6.0.3.2. You said your version is 3.2.0.0. Try updating it and flashing everything again. Maybe that's the problem. Newer recoveries flash ROMs in a different way.
Good luck!
Click to expand...
Click to collapse
i have clockworkMod Recovery v3.2.0.0 (solarnz-R4c-100611-1150).
could you point me towards updating it
Thanks,
Manish
Can you send me the mod ussd to.check.balance ?
Sent from my MZ601 using Tapatalk 4 Beta
android-hilfe.de/attachments/root-hacking-modding-fuer-motorola-xoom/213225d1371198051-rom-jb-team-eos-4-4-2-2-umts_everest-mz601-eu-3g-wifi-ussd-mod-mz601-eos-nightly-168.zip
mhmishra said:
i have clockworkMod Recovery v3.2.0.0 (solarnz-R4c-100611-1150).
could you point me towards updating it
Thanks,
Manish
Click to expand...
Click to collapse
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.3.2-everest.img
:good:
iball andi 5c jellybean and cwm update
as you have rooted the iball andi 5c, i have also rooted it by binary method
but i can not find any custom rom for it, and dont know how to upgrade its recovery from android recovery3e to cwm5 or higher?
and how can i install jelly bean in it?
please reply and suggest me
thanks in advance
mhmishra said:
Hi All,
i have successfully rooted my Xoom and flashed [4.2.2 JDQ39 AOSP] Eos 4.0 -- Umts_Everest 167 on MZ601 along with gapps-jb-20130413-EOS-XOOM-ONLY.zip, using clockworkmod recovery 3.2.0.0 solarnz-r4c
Thanks team EOS for the same.
few queries for which i searched a lot on XDA.
1. it seems android Phone dialer is not present
2. SMS sometimes works somes times doesn't
3. i installed rom manager but it is asking to install TWRP / Clockworkmod recovery. any suggestions?
could some point me to a backup restore solution which does not ask for conformation on batch restore.
thanks,
MM
Rooted unlocked Flahsed Xoom Mz601 - 4.2.2 JDQ39 AOSP] Eos 4.0 - 167
Rooted Xperia Arc S
Rooted Iball Andi 5c chipset MT6575
Click to expand...
Click to collapse
for parth
sorry to say that i have rooted the device but have noe sutom rom for the same and have upgraded the recovery module.
thanks,
MM
Parth_patel16 said:
as you have rooted the iball andi 5c, i have also rooted it by binary method
but i can not find any custom rom for it, and dont know how to upgrade its recovery from android recovery3e to cwm5 or higher?
and how can i install jelly bean in it?
please reply and suggest me
thanks in advance
Click to expand...
Click to collapse
how ?
how have u upgraded the cwm module?
mhmishra said:
sorry to say that i have rooted the device but have noe sutom rom for the same and have upgraded the recovery module.
thanks,
MM
Click to expand...
Click to collapse
Related
Hi ...
Whenever I open Rom manager it says there is a new update available for clockwork mode recovery....
current recovery 5.x.x.x
latest recovery 6.0.1.0
but when i boot into recovery mod it says cwm 6.0.1.0..
how to update this recovery from Rom manager,..
plzz help..
I am using cm9 RC2 on my gt I9100g...(galaxy s2 G)..
VJ
vijitvidya007 said:
Hi ...
Whenever I open Rom manager it says there is a new update available for clockwork mode recovery....
current recovery 5.x.x.x
latest recovery 6.0.1.0
but when i boot into recovery mod it says cwm 6.0.1.0..
how to update this recovery from Rom manager,..
plzz help..
I am using cm9 RC2 on my gt I9100g...(galaxy s2 G)..
VJ
Click to expand...
Click to collapse
If you cant find any CWM 6 based kernels or firmwares in the 9100G's development section, then its probably not yet supported on this device. If yes, then this should be a bug in ROM Manager.
flashing apropriated kernel for SL I9100G for CynagonMod 9
Hi there i´m a noob,
i have flashed my Galaxy SL I9100G successfull on the latest Build of CynagonMod 9.
before i´ve flashed the ICS LP7 - 5.5.0.4 Kernel. Because it was suggested in an other android forum
to get work Cynagonmod 9 work.
My question: which kernel is the best for the SL I9100G device to work with CM9 ?
I have seen there are other Kernels listed in the thread: [KERNEL][GT-I9100G][GB+ICS/LP7] ClockworkMod Recovery 5:
GB - 5.0.2.8
ICS - 5.5.0.4
Are this Kernels better than the ICS LP7 - 5.5.0.4 kernel?
I would like to work with a stabil ROM Manager, which let me make backup´s, etc...
and maybe flashing other ROM´s but the LP7 is a little bit buggy.
In the above named thread their is also a statement which make me a little bit afraid:
Don't use this kernel on aosp based roms like CyanogenMod!!!
But i have flashed CynagonMod 9 with one of the suggested kernels. have i make a mistake?
Hi guys
I've just flashed CM9 rom on my Goclever A971.
Work fine quick and stable
Now I'm wondering if it is possible to flash another ROM but don't know if I need specific ROM cooked exactly for this TAM or I can use any one ie. Jelly Bean for Samsung TAbs ?
Mark
marbedMB said:
Hi guys
I've just flashed CM9 rom on my Goclever A971.
Work fine quick and stable
Now I'm wondering if it is possible to flash another ROM but don't know if I need specific ROM cooked exactly for this TAM or I can use any one ie. Jelly Bean for Samsung TAbs ?
Mark
Click to expand...
Click to collapse
Plase check out the CM10 rom from the "inofficial allwinner" firmware thread. You will have to use the "compatbility zip" for the Mediacom 910i. This device is identical to the Mediacom. I'm running Jelly Bean 0902 on it. It is the best rom thus far for this hardware.
mojemacki said:
Plase check out the CM10 rom from the "inofficial allwinner" firmware thread. You will have to use the "compatbility zip" for the Mediacom 910i. This device is identical to the Mediacom. I'm running Jelly Bean 0902 on it. It is the best rom thus far for this hardware.
Click to expand...
Click to collapse
but how do i use the compatibility.zip without clockworkmod working?
I am having a ROOTED hcl u2 tab.Anybody please help me to install cwm recovery in it.I tried rom manager and recovery img method(if=/mnt/sdcard/recovery.img of=/dev/block/mmcblk0p3).BUT in rom mangr ma tab was not listed and next method i got a error.plz help
anandu4u said:
I am having a ROOTED hcl u2 tab.Anybody please help me to install cwm recovery in it.I tried rom manager and recovery img method(if=/mnt/sdcard/recovery.img of=/dev/block/mmcblk0p3).BUT in rom mangr ma tab was not listed and next method i got a error.plz help
Click to expand...
Click to collapse
Give your device information.. What device you are using ?
Hck ME U2 TAB
ANDROID 4.0.4 ICS
KERNEL 2.6.34 [email protected] #644
anandu4u said:
Hck ME U2 TAB
ANDROID 4.0.4 ICS
KERNEL 2.6.34 [email protected] #644
Click to expand...
Click to collapse
First try this method..
http://leo13world.blogspot.com/2013/06/root-hcl-me-u2-alternate-method.html
In case if it doesnt work. then try 2nd method given below
2nd method.
http://leo13world.blogspot.com/2013/06/how-to-root-hcl-me-u-2-tab.html
but there is a mistake in 2nd method
the patched unlockroot ie. 3.36 is giving the error update next time, but the version 3.13 (available on unlockroot site free download - http://www.unlockroot.com/download.html) worked.
But i already rooted it.I want to know how to install clockwork mod recovery in the Hcl me u2 tab,SO i can install custom roms.
i'm sorry but there is no such recovery for Tab u2 yet.. And i believe that there will no custom rom for ur device also.
Hey u cud use the method we use to install recovery on generic ICS tabs (use cortex a9 based tablets as your search base), 'least worth a try.
Sent from my GT-P3110 using XDA Premium 4 mobile app
hi guys...my ascend p1 was running a stock Rom B013 Vodafone version which dint seem to upgrade...i changed the recovery to CWM to install custom 4.3 JB Rom>>how do i instal an official or stock Rom from a custom one?....any help please...i will realy appreciate
Eddie..thanks
eddiepos said:
hi guys...my ascend p1 was running a stock Rom B013 Vodafone version which dint seem to upgrade...i changed the recovery to CWM to install custom 4.3 JB Rom>>how do i instal an official or stock Rom from a custom one?....any help please...i will realy appreciate
Eddie..thanks
Click to expand...
Click to collapse
refer to here
Good Morning developer community,
I'm looking for the 4.4.2 kitkat ROM for the Matricom G-Tab Quantum tablet. The tablet is currently running 4.2.2 ROM and would like to upgrade to a newer ROM. I am unsure where to source the ROM as Matricom no longer supports the G-Tab. The tablet does have its own boot loader I can access to install new Roms from. Any help would be greatly appreciated.
Regards,
Taylor L.
XxAltec_XenonxX said:
Good Morning developer community,
I'm looking for the 4.4.2 kitkat ROM for the Matricom G-Tab Quantum tablet. The tablet is currently running 4.2.2 ROM and would like to upgrade to a newer ROM. I am unsure where to source the ROM as Matricom no longer supports the G-Tab. The tablet does have its own boot loader I can access to install new Roms from. Any help would be greatly appreciated.
Regards,
Taylor L.
Click to expand...
Click to collapse
This request ist 1 year old, I know, but just in case, here ist the KitKat firmware file to flash with Phoenix Suit:
http://www.mediafire.com/file/c7r6j217vdpl67m/Quantum10.img/file
Is there a Jelly Bean Firmware file somewhere too?
zitronenmelissa said:
This request ist 1 year old, I know, but just in case, here ist the KitKat firmware file to flash with Phoenix Suit:
...
Is there a Jelly Bean Firmware file somewhere too?
Click to expand...
Click to collapse
Dear Sir,
Do you still have this KitKat ROM file? Could you please share it with me?
persty said:
Dear Sir,
Do you still have this KitKat ROM file? Could you please share it with me?
Click to expand...
Click to collapse
Sorry, I don't