[req] caf kernel ics - Optimus One, P500, V Q&A, Help & Troubleshooting

Hello guys.I would life to request the caf kernel for p500 if someone has it in his pc because the download link isn't available anymore and I lost the zip during a microsd card failure.This is the kernel I'm talking about: http://forum.xda-developers.com/showthread.php?t=1468792 .
If anyone has it please post a download link here.Don't recommend me other kernels because I already have in mind to flash SH 4d/9d kernel,but I have my reasons to think that caf has better battery life.Thanks all !
I already pmed @thachtunganh and some other people who i thought might have it,but either i didn't got an answer,either the answer was no.

This is the only CAF kernel I have on my phone, but I don't remember what version this is. Use at your own risk.
Link: https://copy.com/Qb7YS

Related

Wondermedia WM8880 SoC TABLET's - JB/KK ROM and KERNEL+Recovery's Development

Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. So don't be an *** ****
*/
hi.. i'm already started make some modifications on ROM with other Brazilian DEV's for "Evertek S.A - SKMtek Genesis Tab GT7305"... we already found the source kernel from another Netbook or Development Board PC who uses the same SOC... but nothing already have been maked to kernel, we use the provided kernel from stock (Kernel 3.4.5+)... and about the ROM we already have two custom ROM's... One is Stock Modded (4.2.2) and another is KitKat Ported ROM from another Evertek Device... *Portuguese-Brazil Language Site/Forum
And we already make some modifications to this KK port...
- ROOT
- BusyBox
- Init.D support
- Build.Prop Mods
- SuperUser
- zipalign apps after boot
.. and other mods.
we already make too much on ROM but nothing about kernel... we want make a better kernel with optimizations and a better TCP/Clock Table, More Governors , More I/O Scheduler and maybe Overclock to 1600mhz to start after have a custom Kernel booting...
Now we need someone who understand about recovery's like CWM or TWRP and Kernel Compilation better than me to we can start make something awesome =D i think this can be used to another company's/Chinese tablets too, using the same SOC (WM8880) evidently... . . . (Found^^Working^^Recovery's)
i can't start testing here because if i flash this kernel using the Stock Recovery (WonderMedia Recovery tool) maybe i can possible brick my tablet... so if someone understand about CMW recovery to start would be nice =D
Update Progress / ChangeLog ¬
Code:
# 25/12:
- [STRIKE]Found Possible match [URL="http://forum.xda-developers.com/showthread.php?t=2305268"]CWM port[/URL] from [URL="http://forum.xda-developers.com/showthread.php?t=2216390"]Asus MeMo Pad 7{ME172V}[/URL] on XDA Forum[/STRIKE] #NOPE...
- FOUND WOKING [URL="http://blog.hadi-cpu.com/2013/09/cwm-recovery-6036-w8850-rc2.html"]CWM Recovery[/URL] from Malasya Blog from Generic WM8850 SOC tablet , Founded [URL="http://blog.hadi-cpu.com/2013/10/twrp-touch-wondermedia-wm8850-jb-version.html"]TWRP recovery[/URL] too but not tested (Thanks to #Rollidark to notify me about and #osinaldi to discover that from malasya blog) [Mirrors -> [URL="https://www.4shared.com/rar/2POyc0B0ba/CWM_WM8850_NSFAT-RC2.htm?sop=true"]CMW[/URL] -> [URL="https://www.4shared.com/rar/rJBfUTQF/TWRP-JB-NSFAT-WM8850.htm"]TWRP[/URL]] // [URL="https://www.facebook.com/groups/NewSmartFrenAndroTab/"]Facebook Group of Recovery Developers[/URL]
- Studying some way to introduce the missing Touch driver to kernel from [URL="https://gist.github.com/psachin"]psachin Github[/URL]|[URL="http://cdn.liliputing.com/wp-content/uploads/2013/01/rock_02.jpg"]apc-rock-II-[/URL]|[URL="https://github.com/psachin/apc-rock-II-kernel"]kernel[/URL] how already modded the Source to work with [URL="http://tinyurl.com/oqxmuam"]Generic Netbook[/URL] who uses the same SOC
-- Merry Christmas to #ALL
# ?? to 23~24/12:
- ROM JB and KK + ADV. Patch developed by Brazilian Dev's team
- found Source Kernel to WM8880 SoC
Brazilian Developers who already help this projects from forum - genesiseries :
Code:
# KK ROM:
- #paulomsilva2006 {KitKat ROM Port}
- #Rollidark {KitKat Patch}
- #Wcfuria
- #? - Pedro Alves
- #? - Pedro Victor
- #? - Walter Moretti
- #? - Moises Teixeira
Code:
# JB Stock ROM:
- #ylukasy {ROM Dev.}
- #Rollidark
- #paulomsilva2006
- +?
if i forget someone.. please comment below :highfive:
Reserved
wow there's only a handful on and off development going on for this SoC, I still keep my WM8880 tablet just in case somebody made a breakthrough in doing Custom ROM or even getting real ubuntu/debian to boot natively... are you still on this?
funtikar said:
wow there's only a handful on and off development going on for this SoC, I still keep my WM8880 tablet just in case somebody made a breakthrough in doing Custom ROM or even getting real ubuntu/debian to boot natively... are you still on this?
Click to expand...
Click to collapse
just a few Brazilian and Malasya Developers still make progress with this SoC... if you want to try install the custom ROM´s i have shared upper topic.. it will be by your won and I am not responsible for bricked devices...
i´m already started make progress with Custom Kernel but i need found the touch screen driver source and re-work the sound driver(Alsa Drivers...) and compile the recovery with kernel too.. to than have some trust on my work to flash it on tablet =#
:highfive:
DvDwx. said:
just a few Brazilian and Malasya Developers still make progress with this SoC... if you want to try install the custom ROM´s i have shared upper topic.. it will be by your won and I am not responsible for bricked devices...
i´m already started make progress with Custom Kernel but i need found the touch screen driver source and re-work the sound driver(Alsa Drivers...) and compile the recovery with kernel too.. to than have some trust on my work to flash it on tablet =#
:highfive:
Click to expand...
Click to collapse
meh, its my rom testing ground anyway not really worried .. i actually have the tablet connect directly from the battery wires(the battery removed) to the adapter(usb)... anything is better than nothing for the development hehe...wait by Malasya do u mean Malaysia? whos that developer lol..
funtikar said:
meh, its my rom testing ground anyway not really worried .. i actually have the tablet connect directly from the battery wires(the battery removed) to the adapter(usb)... anything is better than nothing for the development hehe...wait by Malasya do u mean Malaysia? whos that developer lol..
Click to expand...
Click to collapse
i mean Malaysia.. the country... because i don't have found the real developer.. only the Facebook's group where it have been shared... i write too fast and don't check if i write it correct too...
--
i Already compile the kernel with CMW recovery and flashed on tablet ... but i need find the Touchpad driver to make he work properly... i stay getting some other minor issues on logcat/kmsg reports...
but i already test four touch drivers and anyone works... only OTG stay working.. that is the problem on developing the kernel without the official source release by the producer company... maybe i will need close this developing project because that =/
DvDwx. said:
i mean Malaysia.. the country... because i don't have found the real developer.. only the Facebook's group where it have been shared... i write too fast and don't check if i write it correct too...
--
i Already compile the kernel with CMW recovery and flashed on tablet ... but i need find the Touchpad driver to make he work properly... i stay getting some other minor issues on logcat/kmsg reports...
but i already test four touch drivers and anyone works... only OTG stay working.. that is the problem on developing the kernel without the official source release by the producer company... maybe i will need close this developing project because that =/
Click to expand...
Click to collapse
what a coincidence , I was wondering today when you will reply lol
ah I see too bad, maybe you will share it at techknowme forum, ... wow Malaysian ?, Im asking because I'm Malaysian, can you pm me the link where its shared?
DvDwx. said:
i mean Malaysia.. the country... because i don't have found the real developer.. only the Facebook's group where it have been shared... i write too fast and don't check if i write it correct too...
--
i Already compile the kernel with CMW recovery and flashed on tablet ... but i need find the Touchpad driver to make he work properly... i stay getting some other minor issues on logcat/kmsg reports...
but i already test four touch drivers and anyone works... only OTG stay working.. that is the problem on developing the kernel without the official source release by the producer company... maybe i will need close this developing project because that =/
Click to expand...
Click to collapse
please continue developing this project..i have using acer b1 740 and it dont have android 4.4 update
tuyenat3 said:
please continue developing this project..i have using acer b1 740 and it dont have android 4.4 update
Click to expand...
Click to collapse
man... i just don't want blame anyone but... to we can do something to your tablet we need the kernel source and that don't stay open to developers... on this Chinese tablets we have some little configurations to can work with... but the custom kernel project i need to abandon for two reasons... first i don't have much time to can work to create a stable and functional custom kernel to everyone... second i don't have a kernel source compatible with tablets... what i found is from a electronics engineering Project computer Board ... and to it can fit on tablet is missing too much drivers compatibles with to can work smoothly and functional... someday if i found a new source maybe i can try comeback developer something to that =#
please continue developing this project
I use a genesis 7305 his kernel is very poorly optimized would like to make this usable tablet sorry for my bad English I use Google translator ;-;
2021... I tried to put a Chinese rom, but I brick the tablet, it only responds to fastboot, when I put the sudo command fastboot flash:raw boot uzImage.bin ramdisk.bin and plug in the charger and press power it appears a genesis screen.
Boot FOSSEE-OS from SCARD | FOSSEE-Laptop
laptop.fossee.in
GitHub - FOSSEE/FOSSEE-netbook-kernel-source: A low cost fossee-laptop based on wm8880 ARMv7 SoC
A low cost fossee-laptop based on wm8880 ARMv7 SoC - GitHub - FOSSEE/FOSSEE-netbook-kernel-source: A low cost fossee-laptop based on wm8880 ARMv7 SoC
github.com

...

...
GPL Stuff and Other Info:
https://github.com/VilleSensePortingTeam
Kernel and Maybe ramdisk will be there. ROM base will be uploaded there as well.
We could use SVN but I prefer git
Next post will be instructions on how to download that I'll complete when We have a booting ROM.
This thread is also where the FAQ, Download Instructions, and other general non development related info will be.
We'd like to keep the ROM Thread Clean and Focused on Development ONLY, and this thread for discussion.
Also Thanks List:
@LlabTooFeR for the base
@dd98 for the ROM Development
@javelinanddart for the Kernel Development @Zarboz for the kernel base @pirlano for the rom development
I personally WILL NOT help anyone who has not searched and thoroughly read the instructions because there will be a lot of them
There will also be no ETAs
Download Instructions: Coming Soon!
FAQ: Coming Soon!
Heres something that should help us with this rom
link
New MaximusHD for M7 is coming: https://twitter.com/LlabTooFeR/status/569807285960077312
Still no kernel sources on HTCdev...
kdd998 said:
New MaximusHD for M7 is coming: https://twitter.com/LlabTooFeR/status/569807285960077312
Still no kernel sources on HTCdev...
Click to expand...
Click to collapse
As far as I know the Ireland and UK lollipop ota is to be released on Wednesday
First kernel source archive for M7 and Android 5.0.1 is here: http://dl4.htc.com/RomCode/Source_and_Binaries/m7ul-3.4.10-g3c9a631.zip
Going to have a look at it this week-end... If anybody want a tester, I'm in
kdd998 said:
First kernel source archive for M7 and Android 5.0.1 is here: http://dl4.htc.com/RomCode/Source_and_Binaries/m7ul-3.4.10-g3c9a631.zip
Going to have a look at it this week-end... If anybody want a tester, I'm in
Click to expand...
Click to collapse
Thats strange. HTC has the source code listed for Android 5.0.1 yet the dev edition and the EU 7.19.401.2 update is based on Android 5.0.2
As I can see well, HTC put in access the kernel
I've been looking at the HTC kernel source for M7 and tried to build it for our ville. This, I managed: I got a kernel. I then tried to make a boot.img but I don't get from where to start. Which initrd should we base on?
I don't have time to work on this these days, but maybe in a week I'll have a few hours. I'm reading any pieces on advice on how I can help and which ways I can explore.
I intend to start from MaximuxHD 52.0.0 by @LlabTooFeR. Maybe we could try to start from the base he's working on instead...
Anybody else tried anything?
Take a look
http://forum.xda-developers.com/showthread.php?t=3050637
Sense 7 port for HTC One M7 is here
Inviato dal mio Nexus 7 con Tapatalk 2
Devs Please Port this to One XL (Snapdragon S4)
Devs Please port lollipop sense to One XL too
One s & XL have almost identical hardware
I'm really interested in this rom. Thank you!
I think we will never get a sense 7 port
@dd98
I got @Zarboz to help with a kernel
It's on the team github
Let's upload the MaximusHD M7 ROM and start this!
I'm compiling the kernel he gave us right now
We will use CM's Wifi Firmware and Drivers
The only thing he's concerned about is the display drivers not working
Also Ville is not my main phone anymore and I might have to give it up this summer, just fyi
I'm also undertaking porting a Linux 3.4 Kernel to the Samsung Galaxy S Blaze 4G as well as LP to it (with the 3.0 kernel atm)
@pirlano, I'll add you to the github Done
Also the kernel is not compiling atm
javelinanddart said:
@dd98
I got @Zarboz to help with a kernel
It's on the team github
Let's upload the MaximusHD M7 ROM and start this!
I'm compiling the kernel he gave us right now
We will use CM's Wifi Firmware and Drivers
The only thing he's concerned about is the display drivers not working
Also Ville is not my main phone anymore and I might have to give it up this summer, just fyi
I'm also undertaking porting a Linux 3.4 Kernel to the Samsung Galaxy S Blaze 4G as well as LP to it (with the 3.0 kernel atm)
@pirlano, I'll add you to the github Done
Also the kernel is not compiling atm
Click to expand...
Click to collapse
I think it's better to wait for T6 International LP rom
But I'll see what I can do with kernel, I was porting M7 LP kernel in private (Zarboz one is an M8 port?)
pirlano said:
I think it's better to wait for T6 International LP rom
But I'll see what I can do with kernel, I was porting M7 LP kernel in private (Zarboz one is an M8 port?)
Click to expand...
Click to collapse
OK, but why T6?
Zarboz said there's only so many device specific files: If we chose apq8064 in m8 source, and added m7 files, we could build m7 kernel
feel free to push your repo
javelinanddart said:
OK, but why T6?
Zarboz said there's only so many device specific files: If we chose apq8064 in m8 source, and added m7 files, we could build m7 kernel
feel free to push your repo
Click to expand...
Click to collapse
Because T6 international WiFi (firmware maybe not, but for example qualcomm chip hotspot framework and config yes), BT, FM Radio framework, config, app and binary files are perfect for Ville!
For example, BT and FM Radio in 4.4.2 Sense 6 were fixed with T6 files. Same for BT with "4.4.3 experimental" can be fixed with T6 BT files (FM can't be fixed because of a T6 lib that doesn't works with all others M7 libs).
javelinanddart said:
@dd98
I got @Zarboz to help with a kernel
It's on the team github
Let's upload the MaximusHD M7 ROM and start this!
I'm compiling the kernel he gave us right now
We will use CM's Wifi Firmware and Drivers
The only thing he's concerned about is the display drivers not working
Also Ville is not my main phone anymore and I might have to give it up this summer, just fyi
I'm also undertaking porting a Linux 3.4 Kernel to the Samsung Galaxy S Blaze 4G as well as LP to it (with the 3.0 kernel atm)
@pirlano, I'll add you to the github Done
Also the kernel is not compiling atm
Click to expand...
Click to collapse
Thats great, the more the better
Shona lá Fhéile Pádraig ?

Is There a Custom Kernel Available for Nokia 3 TA 1032

My device is Nokia 3 TA 1032 running Android Pie rooted using Magisk and with TWRP custom recovery with kernel version 3.18.119+ ....
Is there a custom Kernel available for this device which is 3.19 or above.?.?.
If so ...can anyone provide me the link please.?.?.
And if not...does anyone know about porting/compiling kernel for this device.?.?.
please...i need some help....
https://ibb.*co/ MCBrDtC
mechano59 said:
My device is Nokia 3 TA 1032 running Android Pie rooted using Magisk and with TWRP custom recovery with kernel version 3.18.119+ ....
Is there a custom Kernel available for this device which is 3.19 or above.?.?.
If so ...can anyone provide me the link please.?.?.
And if not...does anyone know about porting/compiling kernel for this device.?.?.
please...i need some help....
https://ibb.*co/ MCBrDtC
Click to expand...
Click to collapse
I dont' know if there's a custom kernel for this device. But you can download the source code form here https://www.nokia.com/phones/en_int/opensource to compile it and add features by yourself.
Isrks said:
I dont' know if there's a custom kernel for this device. But you can download the source code form here https://www.nokia.com/phones/en_int/opensource to compile it and add features by yourself.
Click to expand...
Click to collapse
https://ibb. co/WWFxSsb
sir there seems to be multiple files...which one should i download.?.?. I am really new to this...
and I will be very grateful if you can point to any tutorials or blog posts on how to modify kernels coz i cant seem to find any...
mechano59 said:
https://ibb. co/WWFxSsb
sir there seems to be multiple files...which one should i download.?.?. I am really new to this...
and I will be very grateful if you can point to any tutorials or blog posts on how to modify kernels coz i cant seem to find any...
Click to expand...
Click to collapse
To compile a kernel from source you can follow this tutorial.
https://forum.xda-developers.com/android/software/ultimate-guide-compile-android-kernel-t2871276
There are more threads, this is an example.
The build number in your screenshot (5_180) tells the number of the kernel version you need to download (i want think so ), in this case is the Nokia3_V5.180.tar.bz2 file.
Isrks said:
To compile a kernel from source you can follow this tutorial.
https://forum.xda-developers.com/android/software/ultimate-guide-compile-android-kernel-t2871276
There are more threads, this is an example.
The build number in your screenshot (5_180) tells the number of the kernel version you need to download (i want think so ), in this case is the Nokia3_V5.180.tar.bz2 file.
Click to expand...
Click to collapse
Thank you very much sir....will see if i can do anything with it...
(very sorry for the late reply... )
mechano59 said:
Thank you very much sir....will see if i can do anything with it...
(very sorry for the late reply... )
Click to expand...
Click to collapse
With having a linux environment you can build a kernel from source reading the guides. Adding features is more difficult because the main reason: this device has mediatek SoC.

[rom][aosp][grouper-tilapia][ua]android-8

Hello guys This is AOSP unlegacy android build.
It is a android version-8 (TESTING) .
Sources-
Source code- https://github.com/Unlegacy-Android/android
device- https://github.com/Unlegacy-Android/android_device_asus_grouper/tree/aosp-8.1
kernel- https://github.com/Unlegacy-Android/android_kernel_nvidia_tegra3
vendor - https://github.com/Unlegacy-Android/proprietary_vendor_nvidia/tree/aosp-8.1
Sorry links might be broken or removed
Issues
no camera
does not function with Gapps
no proper otg support
Thanks
@unlegacy android team
@Ziyan
@aosp
Status-testing
This security patches dupes and is faked
****disclaimer
Im not responsible for any kind of damage to device
If you point your finger at us we'll laugh at you
Guys I have got 2021 security patch level at the first flash and at the second flash I found it 2018. Just comment me your security patches.
Works on tilapia and grouper
download Link https://drive.google.com/file/d/10VaRPsRlJTsnKXLkmOiwpcD9pQP9wZNW/view?usp=sharing
Thank you!
I will use it!
edit:How did you write local_manifests?
Also, did you use the Tegra3 hardware tree?
Hey guys how is this rom
few__ said:
Thank you!
I will use it!
edit:How did you write local_manifests?
Also, did you use the Tegra3 hardware tree?
Click to expand...
Click to collapse
Yup I used the normal repo commands (I don't remember properly as I started compiling it 1.5 year ago)
SORRY for if any wrong sources aye!
Hi
Is ROM better than @ud4's 8.1.0 ROM? I currently have @ud4's and there an issue where some apps (like RedReader, Magisk Manager stable, Play Store, etc...) won't launch; they just show a blank screen. Does this ROM also have that issue?
Thanks

[NOOB QUESTION] Can an old android phone get the newest linux kernel without baseband functionality?

i'm noob here, so... sorry if the question sound silly...
is it possible to have an old qualcomm device (msm8610) a latest linux kernel such as 5.10 or 5.11 if i don't need the baseband functionality? is all the other driver is also closed source? i'm asking this because i have an old unused phone that i want to use to learn about kernel compiling and learn about hardware and stuff, and i just don't want to waste my time if such thing is impossible (compiling latest kernel for old phone)...
pink101 said:
i'm noob here, so... sorry if the question sound silly...
is it possible to have an old qualcomm device (msm8610) a latest linux kernel such as 5.10 or 5.11 if i don't need the baseband functionality? is all the other driver is also closed source? i'm asking this because i have an old unused phone that i want to use to learn about kernel compiling and learn about hardware and stuff, and i just don't want to waste my time if such thing is impossible (compiling latest kernel for old phone)...
Click to expand...
Click to collapse
If the stock kernel source code for your device is available to the public, you can use that to compile a new custom kernel for your device. But, an old device may not be able to use the latest kernel. If the stock kernel source code for your device is not available, you can't build a new custom kernel for your device.

Categories

Resources