Related
I'm going to probably get a lot of hate for this because there are a ton of forums that might get me here. I did search for about 3 hours tonight and discovered some things but am still confused. I hope someone can help this be more simple. So a friend has a Nexus S that isn't working (I have a Nexus S by the by too). It's unlocked but no ClockWork on it. I can press volume up and power to get to fastboot mode. When I click on "reboot," the phone will just loop on the Google logo. If I click recovery, it starts to boot then shows the triangle with the exclamation mark. From there, I can press power and up or down on volume to get the blue screen which says reboot system now, apply update, wipe, wipe. You get it. I'm stuck...I can also turn off the phone, hold volume up/down and plug in the usb to get to "downloading..."
I want to get this phone working and back to stock. I have the SDK Manager (my phone isn't rooted so I use it to take screenshots) and pda net (which I still don't understand why or how to use with this) and two versions of Odin. It seems like Odin can get this working but I can't get it to work or find a clear guide on how to use it and which ones to use. This is a Tmob Nexus S, I think the i9020. Any help would be so greatly appreciated and I will give you all the credit. Oh, and i can pull up the device on ddms with the sdk manager and can explore the files but there is nothing. I can't find a way to drag a file on the phone to "apply update from /sdcard." Sorry again and thanks again!
callison.168 said:
I'm going to probably get a lot of hate for this because there are a ton of forums that might get me here. I did search for about 3 hours tonight and discovered some things but am still confused. I hope someone can help this be more simple. So a friend has a Nexus S that isn't working (I have a Nexus S by the by too). It's unlocked but no ClockWork on it. I can press volume up and power to get to fastboot mode. When I click on "reboot," the phone will just loop on the Google logo. If I click recovery, it starts to boot then shows the triangle with the exclamation mark. From there, I can press power and up or down on volume to get the blue screen which says reboot system now, apply update, wipe, wipe. You get it. I'm stuck...I can also turn off the phone, hold volume up/down and plug in the usb to get to "downloading..."
I want to get this phone working and back to stock. I have the SDK Manager (my phone isn't rooted so I use it to take screenshots) and pda net (which I still don't understand why or how to use with this) and two versions of Odin. It seems like Odin can get this working but I can't get it to work or find a clear guide on how to use it and which ones to use. This is a Tmob Nexus S, I think the i9020. Any help would be so greatly appreciated and I will give you all the credit. Oh, and i can pull up the device on ddms with the sdk manager and can explore the files but there is nothing. I can't find a way to drag a file on the phone to "apply update from /sdcard." Sorry again and thanks again!
Click to expand...
Click to collapse
It seems your boot.img file either corrupted or missing.
Find a working copy of file, flash it via ADB interface or fastboot. Flash recovery file CWM. If that doesnt work, Try flashing CM7 Rom or someother ROM.
Did you check http://forum.xda-developers.com/showthread.php?t=895545 ?
Odin should be your last resort, if nothing really works for you.
If you want to return to stock, simply flash the NAND backup found here: http://forum.xda-developers.com/showthread.php?t=884093 .
Disclaimer : I take no responsibility of what so ever happens to your phone, however you should be good if you follow proper steps.
Thanks so much for the quick reply. I think I've made some headway...I can "see" the device with cmd by typing adb devices. After that though, I don't understand how to get the stock nexus s rom on the phone. How do I move that file to my phone (what's the line of code I type)? I've tried "adb install <c:\grh78> but it says the syntax isn't correct. Any more help is so greatly appreciated and I appreciate the already prompt response. Thanks!!!
callison.168 said:
Thanks so much for the quick reply. I think I've made some headway...I can "see" the device with cmd by typing adb devices. After that though, I don't understand how to get the stock nexus s rom on the phone. How do I move that file to my phone (what's the line of code I type)? I've tried "adb install <c:\grh78> but it says the syntax isn't correct. Any more help is so greatly appreciated and I appreciate the already prompt response. Thanks!!!
Click to expand...
Click to collapse
Download your rom of choice (stock, custom)
Flash Cwm via fastboot if you haven't already
Boot into recovery.
Use adb push to push your zipped rom to the sdcard (adb push file.zip /sdcard/file.zip)
Use cwm to flash this zip.
Sent from my Nexus S using xda premium
callison.168 said:
Thanks so much for the quick reply. I think I've made some headway...I can "see" the device with cmd by typing adb devices. After that though, I don't understand how to get the stock nexus s rom on the phone. How do I move that file to my phone (what's the line of code I type)? I've tried "adb install <c:\grh78> but it says the syntax isn't correct. Any more help is so greatly appreciated and I appreciate the already prompt response. Thanks!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=9866675
http://forum.xda-developers.com/showthread.php?t=884093
These threads should be a complete solution to your issue.
Disclaimer : I take no responsibility of what so ever happens to your phone, however you should be good if you follow proper steps.
Wow fast responses. I bet it's annoying to help yet another person having issues (again, phone was given to me like this but yeah...) while you guys or gals already know how to do these things very well. Here's where I'm stuck. I enter this code in cmd:
fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img
and it just says < waiting for device >.
Here's a pic of the screen that I'm on with my phone when i enter the command.
http://imgur.com/Pey3W
If I'm just in the first screen by holding volume up and power, the computer won't read the phone. So I click recovery, the screen shows it's trying to install something then the triangle exclamation mark, i press volume up/down with power and get this screen and the computer can "see" my phone on cmd.
How do I get this flipping clockwork on this phone or get the stock image on my sd card? Thanks again for helping me out guys. I have taken a look at the links you have sent me and that's where i found the download as well as the code to enter. I will keep looking at them but if you find a faster solution, please let me know.
One more thing to be super clear on...when I'm on the screen on the Nexus S that says Fastboot Mode on top in red and Lock State - Unlocked...my computer won't read the phone, therefore I cannot fastboot the recovery img...
callison.168 said:
One more thing to be super clear on...when I'm on the screen on the Nexus S that says Fastboot Mode on top in red and Lock State - Unlocked...my computer won't read the phone, therefore I cannot fastboot the recovery img...
Click to expand...
Click to collapse
So you already tried "fastboot devices" while in fastboot mode?
Edit: Actually it sounds you really want stock so download the complete stock OTA ROM (including boot.img etc.), rename it to update.zip and put it on the root of your sdcard. Boot into the stock recovery like you did already and hit apply update.
EDIT: Go here to download the correct OTA http://forum.xda-developers.com/showthread.php?t=1056062
Find the correct 2.3.6 "Full ROM" for your phone model. Sounds like in those instructions you don't need to rename to update.zip. Haven't seen stock recovery for a while so I don't remember.
If there is a wipe option in the stock recovery then do that first.
Yes I have tried fastboot devices in fastboot mode but nothing because my computer doesn't read the phone in that mode. And yes, I want to put the stock rom on there but that's the key, I can't get access to the root of my sdcard. I can't push anything into the sdcard to flash it. Any ideas what to type or how to access the sdcard? Thanks a million, billion.
Also, I can't get the phone to boot at all, like I can't get passed the Google Logo if I reboot so I can't access the sdcard in the traditional way.
callison.168 said:
Yes I have tried fastboot devices in fastboot mode but nothing because my computer doesn't read the phone in that mode. And yes, I want to put the stock rom on there but that's the key, I can't get access to the root of my sdcard. I can't push anything into the sdcard to flash it. Any ideas what to type or how to access the sdcard? Thanks a million, billion.
Click to expand...
Click to collapse
Connect with adb and type this:
adb shell mount /sdcard
Then type:
adb push rom.zip /sdcard/update.zip
callison.168 said:
Yes I have tried fastboot devices in fastboot mode but nothing because my computer doesn't read the phone in that mode. And yes, I want to put the stock rom on there but that's the key, I can't get access to the root of my sdcard. I can't push anything into the sdcard to flash it. Any ideas what to type or how to access the sdcard? Thanks a million, billion.
Click to expand...
Click to collapse
If fastboot devices returns NOTHING then this is most likely a driver issue. Remove the device through device manager, make sure you have a recent SDK (for the USB driver) and let it re-detect.
callison.168 said:
Also, I can't get the phone to boot at all, like I can't turn on the phone so I can't access the sdcard in the traditional way.
Click to expand...
Click to collapse
If you can get into the boot loader and get a proper USB driver you should be able to flash a recovery.
Once you've flashed Clockwork Mod (recovery) you'll be able to push to the sdcard using ADB or possibly mount the sd card through the CWM menu (although I've yet to have that work).
In order to get a recovery flashed though you need to get fastboot to see your device (unless you can already boot into recovery, then just use ADB).
irishrally said:
Connect with adb and type this:
adb shell mount /sdcard
Then type:
adb push rom.zip /sdcard/update.zip
Click to expand...
Click to collapse
If he's stuck at the Google logo and has a trash boot.img it's not likely he'll be able to get a shell via ADB. Now, if the system is hanging starting a device or looping during boot then that's possible.
krohnjw said:
If he's stuck at the Google logo and has a trash boot.img it's not likely he'll be able to get a shell via ADB. Now, if the system is hanging starting a device or looping during boot then that's possible.
Click to expand...
Click to collapse
He said he can access stock recovery and has connected with adb, unless I read wrong.
irishrally said:
He said he can access stock recovery and has connected with adb, unless I read wrong.
Click to expand...
Click to collapse
Indeed - I saw no clockwork and figured he'd toasted his recovery image as well, but it does look like stock recovery is there. ADB should push fine to the sdcard from recovery then.
More...so if i type in adb reboot bootloader in the recovery screen, it does just that...great. But then my computer makes a noise, a double tap if you will...like a dun dun, like something didn't work. When you plug in something to the computer it usually goes like dun na...but the phone clearly won't read when I'm in bootloader/fastboot mode. So when I type a command, nothing will work...
callison.168 said:
More...so if i type in adb reboot bootloader in the recovery screen, it does just that...great. But then my computer makes a noise, a double tap if you will...like a dun dun, like something didn't work. When you plug in something to the computer it usually goes like dun na...but the phone clearly won't read when I'm in bootloader/fastboot mode. So when I type a command, nothing will work...
Click to expand...
Click to collapse
That noise is that it detects a device has been connected (assuming a recent version of windows). If you want to flash CWM you need to get the driver sorted for the device. No amount of plugging/unplugging is going to fix it.
If you have the stock recovery you can boot into the stock recovery, use adb to push the full OTA package to the sd card and then just flash that from the stock recovery.
callison.168 said:
More...so if i type in adb reboot bootloader in the recovery screen, it does just that...great. But then my computer makes a noise, a double tap if you will...like a dun dun, like something didn't work. When you plug in something to the computer it usually goes like dun na...but the phone clearly won't read when I'm in bootloader/fastboot mode. So when I type a command, nothing will work...
Click to expand...
Click to collapse
Go to the stock recovery like you have done before and type the adb command I wrote above.
Thanks is all I can say. Okay so when I type in the command, this is what I get:
- exec '/system/bin/sh' failed: No such file or directory (2) -
the "stock recovery" I can get into is the picture I posted a link for. That's what I can access as well as the fastboot mode when I first turn on the phone with volume up/power. But when my computer makes the noise that it's connected (using Windows 7 64bit) it makes a different sound then the normal "device connected." Like it's corrupted.
by the way...if we can get this working, I'll post a picture of me holding the fixed phone!
I just rooted my phone last night. I tried to flash cynanogen 10 and forgot to back up the the stock rom. I haven't done this since my last phone. But I got stuck at the cynanogen bootloader screen. I tried to get back to recovery mode but it won"t go. Can someone please help me and give very detailed instructions to get my phone unbricked pleeeeease? I don"t want to to buy another phone. Thank you.
How long did u wait at boot logo screen first boot can take a while and did u flash boot. Img? Are u t mob?
Sent from a man, using a mobile phone
1. Wipe
2. Flash
3. Wipe cache
4. Fastboot boot.IMG
5. Boot
6. Reboot
7. Flash gapps
8. Wipe cache
9. Enjoy the speed
Note this method will only work for hboot under 1.13
k1llacanon said:
How long did u wait at boot logo screen first boot can take a while and did u flash boot. Img? Are u t mob?
Sent from a man, using a mobile phone
Click to expand...
Click to collapse
All I know is that I downloaded the ROM from here, used CWM to flash it on, phone said update installed and rebooted the phone. I waited for an hour and it still did nothing past the bootload screen. Also, yes I'm t-mobile.
Fredfly said:
1. Wipe
2. Flash
3. Wipe cache
4. Fastboot boot.IMG
5. Boot
6. Reboot
7. Flash gapps
8. Wipe cache
9. Enjoy the speed
Note this method will only work for hboot under 1.13
Click to expand...
Click to collapse
If I can't get into recovery, how do I do this, or what can I use to do this?
Fredfly said:
1. Wipe
2. Flash
3. Wipe cache
4. Fastboot boot.IMG
5. Boot
6. Reboot
7. Flash gapps
8. Wipe cache
9. Enjoy the speed
Note this method will only work for hboot under 1.13
Click to expand...
Click to collapse
I have hboot 1.14
Can get ur phone into bootloader mode or fastboot...if yea...then u cn save ur phone...i faced the same problem some days back...and successfully recovered my phone and nw i am using energy rom...
Sent from my HTC VLE_U using xda app-developers app
Okay, let's try something.
Check your drivers on the PC, make sure you have ADB (from Android SDK or other sources).
Power on the phone, plug it in the PC.
Check if any drivers are installing/updating. Also check Device Manager to see if the device is seen in there.
If the PC sees the phone, open a cmd window and navigate to the directory where you have ADB (if using the android SDK, it should be in the tools folder of the installation directory).
In the cmd window, once in the directory containing the ADB, type "adb devices". You should see something about adb server stopping and starting, than, if everything alright, you should see the device as a number.
If you can see your phone, that means you're saved. Just run the command "adb reboot bootloader" and you're good to go.
If the phone cannot be seen by the PC, try and boot the phone holding vloume - pressed, try this with volume + too. Or simply google on how to boot the phone in bootloader mode.
Once in bootloader, again, you're saved. You can go ti fastboot usb mode and from there, do whatever you need to do.
Ruwin said:
Okay, let's try something.
Check your drivers on the PC, make sure you have ADB (from Android SDK or other sources).
Power on the phone, plug it in the PC.
Check if any drivers are installing/updating. Also check Device Manager to see if the device is seen in there.
If the PC sees the phone, open a cmd window and navigate to the directory where you have ADB (if using the android SDK, it should be in the tools folder of the installation directory).
In the cmd window, once in the directory containing the ADB, type "adb devices". You should see something about adb server stopping and starting, than, if everything alright, you should see the device as a number.
If you can see your phone, that means you're saved. Just run the command "adb reboot bootloader" and you're good to go.
If the phone cannot be seen by the PC, try and boot the phone holding vloume - pressed, try this with volume + too. Or simply google on how to boot the phone in bootloader mode.
Once in bootloader, again, you're saved. You can go ti fastboot usb mode and from there, do whatever you need to do.
Click to expand...
Click to collapse
Ok, I downloaded the sdk and my computer recognizes the phone, and I can get into recovery mode, I did a factory reset but it did nothing.
Ruwin said:
Okay, let's try something.
Check your drivers on the PC, make sure you have ADB (from Android SDK or other sources).
Power on the phone, plug it in the PC.
Check if any drivers are installing/updating. Also check Device Manager to see if the device is seen in there.
If the PC sees the phone, open a cmd window and navigate to the directory where you have ADB (if using the android SDK, it should be in the tools folder of the installation directory).
In the cmd window, once in the directory containing the ADB, type "adb devices". You should see something about adb server stopping and starting, than, if everything alright, you should see the device as a number.
If you can see your phone, that means you're saved. Just run the command "adb reboot bootloader" and you're good to go.
If the phone cannot be seen by the PC, try and boot the phone holding vloume - pressed, try this with volume + too. Or simply google on how to boot the phone in bootloader mode.
Once in bootloader, again, you're saved. You can go ti fastboot usb mode and from there, do whatever you need to do.
Click to expand...
Click to collapse
It keeps telling me device not ready
marcus8141981 said:
I just rooted my phone last night. I tried to flash cynanogen 10 and forgot to back up the the stock rom. I haven't done this since my last phone. But I got stuck at the cynanogen bootloader screen. I tried to get back to recovery mode but it won"t go. Can someone please help me and give very detailed instructions to get my phone unbricked pleeeeease? I don"t want to to buy another phone. Thank you.
Click to expand...
Click to collapse
I git it fixed. I thank everyone for their help.
marcus8141981 said:
It keeps telling me device not ready
Click to expand...
Click to collapse
Can you give me more details? Where do you see that message and when exactly? Maybe an ADB logcat?
If you can get into fastboot usb, you can easily google for flashing solutions using fastboot.
always good to say how you fixed it for others who may have similar issue--
Ruwin said:
Okay, let's try something.
Check your drivers on the PC, make sure you have ADB (from Android SDK or other sources).
Power on the phone, plug it in the PC.
Check if any drivers are installing/updating. Also check Device Manager to see if the device is seen in there.
If the PC sees the phone, open a cmd window and navigate to the directory where you have ADB (if using the android SDK, it should be in the tools folder of the installation directory).
In the cmd window, once in the directory containing the ADB, type "adb devices". You should see something about adb server stopping and starting, than, if everything alright, you should see the device as a number.
If you can see your phone, that means you're saved. Just run the command "adb reboot bootloader" and you're good to go.
If the phone cannot be seen by the PC, try and boot the phone holding vloume - pressed, try this with volume + too. Or simply google on how to boot the phone in bootloader mode.
Once in bootloader, again, you're saved. You can go ti fastboot usb mode and from there, do whatever you need to do.
Click to expand...
Click to collapse
I do that and my phone just keeps flickering and goes back in to cwm recovery. Please any ideas?
I want to root my tablet so I flashed TWRP 2.6.0.0 using fastboot everything works fine.
But now I want to install the zip to root the tablet, problem is TWRP cannot mount any storage, internal sdcard external sdcard nothing at all is alway says E:Can't mount 'xxx' on anything I tap.
I tried CWM, and 2.5.0.0 and nothing seems to work.
I can boot fine in the stock OS, everything works fine but that
My bootloader is 10.6.1.27.1-20130711
Can anyone help me?
Ok now it is bad, I tried to factory reset using the bootloader (power + volume down)
It booted in the buged TWRP and now it keeps booting in TWRP and I cannot even reach the bootloader
Try using adb commands to boot into bootloader.
ADB reboot-bootloader is the command that I think you must use. Of course, use adb devices to see if your tab is listed.
______________________________
HTC Evo 4G LTE
aarsyl said:
Try using adb commands to boot into bootloader.
ADB reboot-bootloader is the command that I think you must use. Of course, use adb devices to see if your tab is listed.
______________________________
HTC Evo 4G LTE
Click to expand...
Click to collapse
I cannot get this to work on Windows 8, I have Asus Transformer ADB interface lister in device manager but I cannot see my device with the adb devices command.
Also, in TWRP when I try adb sideload it says failed.
win 8 is the worst OS you want to use when it comes to fastboot/adb (even with secpol.msc full admin access)
get your hands on a win7 / vista /xp
oh and TWRP2.6 is kinda bugged - flash 2.5 or lower
check this http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12 but skip the steps you dont need (system, data userdata etc.)
cheers & gl
-Buster
Buster99 said:
win 8 is the worst OS you want to use when it comes to fastboot/adb (even with secpol.msc full admin access)
get your hands on a win7 / vista /xp
oh and TWRP2.6 is kinda bugged - flash 2.5 or lower
check this http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12 but skip the steps you dont need (system, data userdata etc.)
cheers & gl
-Buster
Click to expand...
Click to collapse
I'm now on my laptop with Win7,
Ok so I tried to reset my device with a needle, but I cannot get it to the bootloader.
Still stuck in TWRP, I tried to go with ADB, I installer google usb driver from Android SDK, I cannot get it to be recognized by ADB, in the device manager I only see Transformer with a yellow "!", I tried with the Asus usb driver, nothing either.
Is there something else I can do to get this recognized with ADB? (fastboot doesn't work either)
I tried unpluging all, uninstalling all and reinstalling like 3 times.
Thanks for your help
Matiosse said:
I'm now on my laptop with Win7,
Ok so I tried to reset my device with a needle, but I cannot get it to the bootloader.
Still stuck in TWRP, I tried to go with ADB, I installer google usb driver from Android SDK, I cannot get it to be recognized by ADB, in the device manager I only see Transformer with a yellow "!", I tried with the Asus usb driver, nothing either.
Is there something else I can do to get this recognized with ADB? (fastboot doesn't work either)
I tried unpluging all, uninstalling all and reinstalling like 3 times.
Thanks for your help
Click to expand...
Click to collapse
fastboot should work. hold Vol-down and reset the device and keep vol-down pressed. it should go to fastboot. when you're in fastboot connect it to your laptop and see if the OS recognized your device - if not you have a driver issue. resolve that by installing the asus driver or the newest google generic drivers.
when you can see your device on dosprompt/powershel with fastboot devices then continue with getting recovery to work.
btw- stuck in twrp means? booting twrp (teamwin screen) but not responding?
good luck
-Buster
The problem is I cannot even get into fastboot, it keeps booting into TWRP, I tried to reset the tab with a needle, but I cannot reach fastboot in any ways
Matiosse said:
The problem is I cannot even get into fastboot, it keeps booting into TWRP, I tried to reset the tab with a needle, but I cannot reach fastboot in any ways
Click to expand...
Click to collapse
but you are still able to boot into android?
I was until I tried a factory reset, it wasn't working in Android so I did it in the fastboot menu.
Matiosse said:
I was until I tried a factory reset, it wasn't working in Android so I did it in the fastboot menu.
Click to expand...
Click to collapse
can you boot into twrp? and i mean just boot into it? so that you see install, backup, restore etc. buttons?
if yes - twrp has an adb mode
connect your tab in twrp to your pc (check that you can see it - adb devices) if yes type: adb reboot bootloader
and you should boot into that. test it with fastboot devices.
most important thing is that you get into fastboot or a working recovery to flash or prepare to flash a (custom) rom back onto your device.
Buster
I can get in TWRP on 2.5.0.0
But when I try ADB sideload it fails
The message is ADB sideload complete - Failed in red + lots of errors like Unable to mount '/data' '/cache' /system' pratically everything (note that I had the same problem of mounting when I was able to boot into Android)
Matiosse said:
I can get in TWRP on 2.5.0.0
But when I try ADB sideload it fails
The message is ADB sideload complete - Failed in red + lots of errors like Unable to mount '/data' '/cache' /system' pratically everything (note that I had the same problem of mounting when I was able to boot into Android)
Click to expand...
Click to collapse
learn to crawl before you run :angel:
Well I rooted 4 different android device and not a single one of them wasn't able to mount anything in recovery mod. I knew exactly what I was doing until I got in the recovery mod who won't even recognize my internal storage meanwhile I was able to perfectly boot in Android
Matiosse said:
Well I rooted 4 different android device and not a single one of them wasn't able to mount anything in recovery mod. I knew exactly what I was doing until I got in the recovery mod who won't even recognize my internal storage meanwhile I was able to perfectly boot in Android
Click to expand...
Click to collapse
dude - you can't boot into android anymore, you can't boot into fastboot to your own accord - yet you try to sideload stuff in twrp for what ever reason.
i gave you more hints and tips in my previous posts and link to get it to work yet it eems you did none.
so don't get me wrong - but what excactly is your goal here?
My goal is to get it working again...
I don't know if you've been reading my post but I did try everything you told me without sucess.
None of the tips I tried got me adb or fastboot working the sideload mode of TWRP doesn't work.
Matiosse said:
My goal is to get it working again...
I don't know if you've been reading my post but I did try everything you told me without sucess.
None of the tips I tried got me adb or fastboot working the sideload mode of TWRP doesn't work.
Click to expand...
Click to collapse
yes i read your posts - but im still unclear what you are trying to accomplish with sideload?
ok from the start:
when in twrp - connect your tab to your laptop - is windows working with it (drivers ok?) "adb devices" shows the device? if yes - adb reboot-bootloader (or fastboot reboot bootloader, not quite sure atm since i'm at work without micro usb cable) when issued the command is the tab rebooting? - and if yes, is it rebooting into twrp or fastboot? what screen is shown after that?
-B
ok from the start:
when in twrp - connect your tab to your laptop - is windows working with it (drivers ok?)
Windows isn't working with it, I tried Google usb driver, asus usb driver, universal adb driver, none of them work, this is where i'm stuck
"adb devices" shows the device? if yes - adb reboot-bootloader (or fastboot reboot bootloader, not quite sure atm since i'm at work without micro usb cable) when issued the command is the tab rebooting? - and if yes, is it rebooting into twrp or fastboot? what screen is shown after that?
Matiosse said:
ok from the start:
when in twrp - connect your tab to your laptop - is windows working with it (drivers ok?)
Windows isn't working with it, I tried Google usb driver, asus usb driver, universal adb driver, none of them work, this is where i'm stuck
"adb devices" shows the device? if yes - adb reboot-bootloader (or fastboot reboot bootloader, not quite sure atm since i'm at work without micro usb cable) when issued the command is the tab rebooting? - and if yes, is it rebooting into twrp or fastboot? what screen is shown after that?
Click to expand...
Click to collapse
when its connected - is device manager at least showing it as faulty or not at all? (yellow triangle exclamation mark thingy, i just installed asus on my VM) -> see attached file
UPDATE: I succeeded to go in fastboot mode
I couldn't get my tab to be recognized by windows so I installer my Nexus 4 using the toolkit, when it was succesfully installed I could manually install my tab since the "android devices" option appeared in the list when you want to manually install a driver in the devices manager. So I could choose Asus ADB interface.
Now I can boot into Android, but it will go into TWRP as soon as I restart my tablet.
Now I will try the link you sent me to get TWRP recognize my storage so I can flash a new rom, I will let you know if something go wrong.
Thanks for helping
I have 2 Xoom tablets, in Germany, and I took the SD Card from one of them to put it on a new phone, the Tablet kept working fine until last week that I forgot to plug it and the battery ran out. When I charged it and started it, it didn´t work again, I got the Encryption message, nothing happens when I click the Reset Tablet either, I tried putting the SD card from my other Xoom but still nothing. I enter the Recovery mode and did a Factory Reset and the tablet was OK.
Battery run out again yesterday and got the same problem once again, but now factory reset is not working, tablet stays stuck at the "M" logo after doing it, I have repeat the operation a zillion times and nothing, it stays on the M. Plus I can´t turn it off either.
The model is the MZ604 and Android Version 4.0.4
I connected the xoom to the computer after installing the drives but it won´t recognize it. I got to do the fastboot and flashed motorolas images but nothing. I can´t do the adb reboot bootloader command because ADB won´t work, because I don´t have USB Debbuging checked, but I can´t check it now because I can´t get to settings (
What can I do to recover the tablet?
Anyone, is driving me crazy, no matter how many time I flash new images it always stays on the original, so I can´t flash any special recoveries either
I tried RDS too and after the reboot stays the same in the M logo, nothing changes. What can I do?
No ideas? :crying:
I want to save the tablet if possible.
Hi, could you explain exactly what you've tried?
In particular what you mean by "I got to do the fastboot and flashed motorolas images but nothing." and "no matter how many time I flash new images it always stays on the original, so I can´t flash any special recoveries either"
By flashed Motorola's images do you mean you flashed the stock images?
And when you say you flash new images but it always stays on the original, I assume you mean the recovery stays as Xoom default?
Let me know and I'll see if I can help.
alecbond said:
Hi, could you explain exactly what you've tried?
In particular what you mean by "I got to do the fastboot and flashed motorolas images but nothing." and "no matter how many time I flash new images it always stays on the original, so I can´t flash any special recoveries either"
By flashed Motorola's images do you mean you flashed the stock images?
And when you say you flash new images but it always stays on the original, I assume you mean the recovery stays as Xoom default?
Let me know and I'll see if I can help.
Click to expand...
Click to collapse
Yes I mean stock images, and yes, it always stays on Xoom default, it never changes no matter which Recovery image I flash.
The recovery is likely reverting to default because the Xoom does this automatically each boot.
We might be able to give you a recovery that stays put but the booting issue may or may not be something worse.
Being able to fix the recovery in place is reliant on adb working from recovery itself, which I'm unsure is possible.
Whilst you seem to have reasonable knowledge of flashing and using adb/fastbbot, I'll give full instructions.
I assume you have the necessary files for fastboot so I'll skip that.
Place your chosen recovery image in your fastboot folder. (I recommend ClockworkMod Touch recovery from here)
Hold shift and right click the folder containing your recovery image and fastboot files, then select 'open command prompt here'
Your PC is now setup for the fastboot process.
Connect your Xoom to your PC.
Power on your Xoom and once you see the Motorola logo, wait about 3 seconds, and press volume down.
The screen should show the Motorola logo in the center and '--> Android Recovery' in the top left.
Press volume down twice more until the top left says fastboot then press volume up.
The screen will say 'Starting Fastboot protocol support'
Now on your PC, in command prompt run the following:
fastboot flash recovery xxxx.img
Rename xxxx.img to whatever your recovery .img file is namedOnce verified, reboot by holding Volume up and Power. (Keep connected to PC and keep command prompt open)
Again, when you see the Motorola logo wait about 3 seconds and hit volume down. You should see 'Android Recovery' in the top left corner, now press volume up to enter recovery, you should now see your flashed recovery.
This is where I'm unsure. Try running the following:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.oldIf you are able to run this, this will rename the files that are reverting the recovery to default and prevent it happening again. If not, we can go ahead with attempting to flash stock images anyway.
To flash stock images download Build H.6.2-24 for Retail Europe (found here.)
Extract the files to your fastboot folder.
Again, reboot your Xoom, either by holding volume up and power, or from recovery.
And again, after about 3 seconds press volume down 3 times until the top left says '--> Fastboot' then press volume up.
Now run the following from command prompt:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lockThis will wipe all data on the Xoom, and hopefully reset it to stock.
Finally, run:
fastboot rebootand you should boot into Android 3.2(?), fingers crossed.
If you require further clarification or help let me know.
alecbond said:
The recovery is likely reverting to default because the Xoom does this automatically each boot.
We might be able to give you a recovery that stays put but the booting issue may or may not be something worse.
Being able to fix the recovery in place is reliant on adb working from recovery itself, which I'm unsure is possible.
Whilst you seem to have reasonable knowledge of flashing and using adb/fastbbot, I'll give full instructions.
I assume you have the necessary files for fastboot so I'll skip that.
Place your chosen recovery image in your fastboot folder. (I recommend ClockworkMod Touch recovery from here)
Hold shift and right click the folder containing your recovery image and fastboot files, then select 'open command prompt here'
Your PC is now setup for the fastboot process.
Connect your Xoom to your PC.
Power on your Xoom and once you see the Motorola logo, wait about 3 seconds, and press volume down.
The screen should show the Motorola logo in the center and '--> Android Recovery' in the top left.
Press volume down twice more until the top left says fastboot then press volume up.
The screen will say 'Starting Fastboot protocol support'
Now on your PC, in command prompt run the following:
fastboot flash recovery xxxx.img
Rename xxxx.img to whatever your recovery .img file is namedOnce verified, reboot by holding Volume up and Power. (Keep connected to PC and keep command prompt open)
Again, when you see the Motorola logo wait about 3 seconds and hit volume down. You should see 'Android Recovery' in the top left corner, now press volume up to enter recovery, you should now see your flashed recovery.
This is where I'm unsure. Try running the following:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.oldIf you are able to run this, this will rename the files that are reverting the recovery to default and prevent it happening again. If not, we can go ahead with attempting to flash stock images anyway.
To flash stock images download Build H.6.2-24 for Retail Europe (found here.)
Extract the files to your fastboot folder.
Again, reboot your Xoom, either by holding volume up and power, or from recovery.
And again, after about 3 seconds press volume down 3 times until the top left says '--> Fastboot' then press volume up.
Now run the following from command prompt:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lockThis will wipe all data on the Xoom, and hopefully reset it to stock.
Finally, run:
fastboot rebootand you should boot into Android 3.2(?), fingers crossed.
If you require further clarification or help let me know.
Click to expand...
Click to collapse
Thanks for the info, sadly I have done almost all that, I can´t use adb commands because I never allowed the tablet to do USB Debbuging, since I wasn´t doing anything that needed that and never thought I would need it. I think I didn´t kept the tablet connected to the PC, so I will try again and let you know if it works.
Like I said before, I'm unsure whether it'll work as I'm not an expert.
However, you may find this helps:
Whilst in recovery and connected to your PC, open Device Manager, find your Xoom, usually under 'Other devices'.
Then right click on your Xoom > Update driver software... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Pick your Xoom (either one if there's two shown)
Windows should confirm the driver installed then adb should work in recovery.
I believe ClockworkMod Recovery enables USB debugging anyway, through modifying default.prop
I'd recommend trying the above, and/or if that fails for any reason download Motorola USB Drivers here.
Thanks again but nothing works, I tried rebooting being connected to the PC and the same thing happens, the default recovery from the Xoom stays there, fastboot shows on the command Prompt and in the tablet that everything went ok and the new image was flashed but the rebooting kills it, and I can´t use any ADB commands because of the stupid USB Debugging, if something like this can happen, Motorola should have left it open from default or at least have a fail safe in case something like this could happen. RDS also flashes an image but when it rebbots the whole thing goes to hell, it stays on the damn logo with the same images. I think I can throw the tablet to the trash :crying:
Unless its a serious hardware issue, I wouldn't trash it! It clearly has life as you're able to successfully flash and such.
I'd recommend having a look at the FAQ.
alecbond said:
Unless its a serious hardware issue, I wouldn't trash it! It clearly has life as you're able to successfully flash and such.
I'd recommend having a look at the FAQ.
Click to expand...
Click to collapse
Thanks, but I have done everything, what is the good thing of a successful flash when the tablet returns to it´s previous state as soon as it reboots?
Plus I can´t use one of the most important things, adb, because of the usb debugging, I can´t get into the tablet to activated it, and even if there are recoveries which bypass this thing, I can´t flash them into the tablet, well I can, they just aren´t there after the reboot. And all this because the tablet run out of battery :crying:
ClockworkMod recovery itself allows the use of adb regardless of USB debugging setting.
I believe the command adb remount should allow it.
If adb is denied you can try what I said earlier
Whilst in recovery and connected to your PC, open Device Manager, find your Xoom, usually under 'Other devices'.
Then right click on your Xoom > Update driver software... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Pick your Xoom (either one if there's two shown)
Windows should confirm the driver installed then adb should work in recovery.
Click to expand...
Click to collapse
alecbond said:
ClockworkMod recovery itself allows the use of adb regardless of USB debugging setting.
I believe the command adb remount should allow it.
If adb is denied you can try what I said earlier
Click to expand...
Click to collapse
The problem lies with the recovery, I only have the default recovery from the xoom, it doesn´t matter how many times I flash it and everything seems to work correctly, when I restart the tablet I get the default recovery. I don´t understand why this happens, command prompt and the tablet in fastboot mode tell me the recovery has been flashed, but to use it I have to reboot and when I do I always find the same good for nothing recovery.
recovery
Hello,
I don't really understand your problem with the recovery ?
When you flash a custom recovery with fast boot, you restart the tab and after 2 or 3 second you see the Motorola Logo you push the volume down
and volume up button to enter in the new recovery.
If you flash custom recovery but restart completely the TAB without manually enter in the custom recovery, each time you retrieve the original recovery.
pots22 said:
Hello,
I don't really understand your problem with the recovery ?
When you flash a custom recovery with fast boot, you restart the tab and after 2 or 3 second you see the Motorola Logo you push the volume down
and volume up button to enter in the new recovery.
If you flash custom recovery but restart completely the TAB without manually enter in the custom recovery, each time you retrieve the original recovery.
Click to expand...
Click to collapse
Here is what happens, I flash new recovery, I restart the xoom with power and volume up, when the logo appears, after 3 seconds, I push volume down, recovery option shows, I press volume up and the default recovery is still there, not the new one I just flashed.
Is really no one out there that can help? :crying:
There's nowhere stated that, however I believe you already have unlocked your bootloader, didn't you? Because it's REALLY weird that it can't flash the recovery, I mean, you left the battery run out, then after charging you wasn't able to boot normally again.
I'll think a little, but give a check if your bootloader is really unlocked, the device should have installed the recovery, and as you didn't restart it entirely (let it go after the dual core logo), the recovery should be there...
"We think so supersonic and we make our bombs atomic" - Eagle Fly Free (Helloween)
Sent from my Nexus 10 using Tapatalk HD
I have done the fastboot oem unlock command, should I do it everytime? I can´t use adb, because like I said, I never check the USB Debugging, which I have done in my other tablet now, don´t want the same thing to happen twice.
is it dead?
hgokuh said:
is it dead?
Click to expand...
Click to collapse
I unfortunately believe that yes, however I'm still thinking about it! So don't give up! As soon as I have another answer I shall post something
"We think so supersonic and we make our bombs atomic" - Eagle Fly Free (Helloween)
Sent from my Nexus 10 using Tapatalk HD
hi guys,
i my shield is stuck on the nvidia logo when booting normally, if it brings up the bootloader, it shows unlocked but hitting continue caused it to freeze on the screen, recovery freezes on nvidia logo and fastboot protocol just brings it back to this screen. i orginally installed twrp and it confirmed successful flash of new os .... on reboot it bricked to its now state, i cant get into twrp or get my pc to see it to install a new copy
anyone got any ideas
thanks
@Fairmax don't click continue, it freezes because there is nothing to continue to, as long as you can enter bootloader your device isn't fully bricked. So, to fix your problem you will have to download official ROM from nvidia's site (https://developer.nvidia.com/shield-open-source find your model and click recovery images).
When you download latest ROM unzip it and follow the textual guide, but, there will be one file missing (i can't remember which one, user data maybe or something like that), don't worry and just continue with the next step. After you flash just reboot to system by holding power button. Good luck !
i cant seem to get it to be recognised by windows all i get is this-- Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.--
trying to install nvidia usb driver via have disk bring up an error that the file is not usable with x64 system
ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd
Fairmax said:
ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd
Click to expand...
Click to collapse
Which command did you type in?
fpozar said:
Which command did you type in?
Click to expand...
Click to collapse
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:
Fairmax said:
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:
Click to expand...
Click to collapse
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...
fpozar said:
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...
Click to expand...
Click to collapse
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works
Fairmax said:
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works
Click to expand...
Click to collapse
You can also try flashing twrp and then lineageos or something from twrp.
fpozar said:
You can also try flashing twrp and then lineageos or something from twrp.
Click to expand...
Click to collapse
good news after a few hours of trying (usb dropped connection a few times then battery died) it finally works again .....been over 2 years since iv had this shield running after nvidia did the recall , now goto put a different rom on there so it dosnt update and kill itself
Hello I had a similar issue with my k1 tablet and ended up flashing factory images via adb fastboot and all flashed fine. Now my tablet is stuck on the boot screen with the green and white nvidia logo. How long does it take to boot please?
I have same issue too. I can load TWRP and flash the other partitions but TWRP shows un-mountable partitions and even a full stock ROM flash will not allow it to boot. I have a similar issue with a recall tablet. what did you do to fix it?