-Title of product: "Otterbox MOT4-ATRX2-20-E4OTR Commuter Series Hybrid Case for Motorola Atrix 2 - 1 Pack - Retail Packaging - Black"
http://www.amazon.com/gp/product/B005V155YO/ref=oh_o03_s00_i00_details
-Price: $21.99 + ??? Shipping (Newegg has it at the same price with free shipping)
-Pictures (sorry if flash makes it too bright, one is blurry but I did a retake of that angle) : http://imgur.com/a/hiioo
These pics should show angles from all six sides, and from top and side while detached to show the added thickness. It also shows the port flaps open, and the hybrid case taken apart. OOPS! Forgot the back angle and the wideness comparison: http://imgur.com/6PlW6; http://imgur.com/2fHb5
-Functionality: Does the job well. All ports and microphones have an opening or a flap, and as you can tell on the pictures, the ports with flaps are the Micro USB/HDMI and Headphone port regions. The flaps are a part of the silicone lining of the inside of the case. The polycarbonate outer shell has openings for these flaps, as well as one on the bottom to allow to pull the phone and the soft inner case out. The flaps fit nicely into the case and don't seem to come free on their own, but I will deduct a point here because the clearance, especially on the Micro USB/HDMI section, is very small, and it's not easy to put in the charging cable, and almost impossible to do in the dark (as I usually charge it as I am going to bed). The buttons are all covered by silicone that protrude out of holes in the polycarbonate shell. They are pretty easy to press, unlike the last case I reviewed. I would like to mention as this is an expensive case, that the included screen protector was a cheap dry-method die-cut that was a little small. I like the cheap screen protectors, but I had to mention it. I am not formulating this into the ratings, but this should be of note if you think that because you are buying an Otterbox means you are getting a good screen protector or something, which I would say that it isn't all that true. Anyways, the silicone liner/case was really loose fitting, but the case makes it extremely hard to insert/remove your phone. Also, the silicone tends to be a dust magnet. The polycarbonate case is susceptible to scratches, which I have already noticed after about a week, and the silicone case looks very easy to tear, and I have no doubts that the flaps will not last forever, and that the unprotected bottom of the case towards the mic and home/back/etc. buttons (just silicone there) seems like it could tear somewhat easily.
Overall rating: 4/5
-Aesthetics and feel: the black color doesn't clash with the phone, and looks very professional. Also, the corners can get dust on them, so if you want it looking clean and pristine after taking it out of your pocket/purse, it probably won't happen without some lint (which comes off easy if you have a air-duster can). It adds a significant amount of weight to the case, 1.3 ounces, which adds nearly 31% to the total weight of the phone and case (1.3oz + 5.2oz). This is acceptable due to the amount of protection it offers. The thickness is also very visible in the photos. The polycarbonate shell feels very slick, even slicker than the other TPU case I reviewed. I want to be able to have a firmer grip on my phone while I use it, so it fell short for me here. The Defender Series case looks like it picks up better on this point, even though its features are slightly different. The differences on the corners and the bottom, where the silicone protrudes through the spaces in the polycarbonate shell, are slightly annoying because they aren't uniform.
Overall rating: 3/5
-Protection: Almost perfect. Really, this case could make the phone survive just about any reasonable fall. The silicone corners and bottom are somewhat of a soft spot, both literally describing them and relationally to the overall protection. While I am mostly sure it would survive a drop at waist level, any higher I would have doubts on my phone's safety. As I said earlier, the polycarbonate shell is quite slick/slippery, but I doubt that a fall from holding it at a normal height would do anything to compromise the phone. This protection really is extremely good, even though I list its shortcomings. It will protect in almost all practical applications.
Overall rating: 5/5
-Arbitrary rating: based from 0-5 on nothing rather than my own opinion for how much I like it: 4/5
-Total overall rating: 16/20
-Conclusions: this is a great case with a lot of protection. Very functional, and looks great.
-Retrospect: would have gotten the slightly more expensive, slightly bulkier, and much heavier Defender Series case if I had the chance to do it over. The texture looks better, and it looks like there is even more protection.
-Also, this case has already been reviewed by another reviewer, 916x10, so I feel that I should link to their review (which, coincidentally, gave the same rating I did) and give them credit for being the first, and also check their review out if you want more insight on the case :
http://forum.xda-developers.com/showthread.php?t=1329075
As always, please feel free to post comments or questions, and I will respond as soon as I can!
LG CCL-320
A little bit expencive but looks great.Bad thing that i couldn't find it in my country anywhere...
Product description:
- Professional and stylish, the CCL-320 is designed specifically to work with you LG Optimus 3D.
- The LG CCL-320 is made from genuine leather which provides rugged protection against scratches and knocks, and features a plastic rail on the inside to securely hold your phone in place. The case and the support rail features cut outs which allow you to access all of the ports and features of your LG Optimus 3D without removing it from the case.
- This case is a horizontal pouch with an integrated viewing stand, so once you've recorded your high-definition 3D movies you can watch them back in comfort. The case also features a magnetic closure which securely holds the case shut ensuring that, when not in use, your phone will remain protected at all times.
- With a case like this, you can confidently store your handset in your pocket, bag or briefcase without worrying if it will get damaged. If your taste is more a classic than funky style, then this is the case for you.
Case-Mate POP!
I'm going to buy this one for sure...
Product description:
LG Optimus 3D P920 Pop Case integrates two materials in a seamless way, a high gloss plastic shell executed with modern technique and a soft interior material to create a co-molded racing glove!
- Co-molding of lightweight plastic and soft rubber for a seamless protective case
- Form fit feature covers back and corners
- Protective lay flat design keeps your screen from hitting surfaces when device is placed on its face
- Impact resistant, flexible plastic shell
- Access to all ports and functions
- Comes in many different colours
Teracell TPU Case
I personally use this. It's lightweight, made of durable material, not slippery and fits our P920 like a glove. :laugh:
Product description:
- Made of solid silicone which fits perfectly on the phone and protects it maximum from the damage from falls and use.
- There are openings for the cameras, LED flash, 3.5mm jack, speaker and microphones.
- Very easy to install and remove from the phone.
- Silicon thickness less than 1mm so very little influence on the size of the device.
- Top quality trim.
Case-Mate Tough Case
Product description:
Built to withstand sudden drops and accidental falls, the Tough case is the epitome of protection. A snug, form fitting silicone wrap provides shock resistance, while the polycarbonate hard shell protects against impact. The lightweight, slim case adds support and shields your phone, keeping your emotional state intact, one drop at a time.
- Dual layers of silicone and polycarbonate hard shell combine for secure protection
- Form fit feature covers back and corners
- Impact resistant, flexible plastic shell
- Access to all ports and functions
Ballistic SG Shell Gel Case
Little bit bulky but I assume that it gives premium protection...
Product description:
The Ballistic Shell Gel (SG) Series case offers amazing protection for your LG optimus 3D P920. The Ballistic Shell Gel (SG) Series Case with not one, not two, but THREE layers of protection. The first and outermost layer is made of Ballistic shock absorbent polymer. Number 2, which is made of a tough impact resistant polycarbonate. Last but not least, layer number three, which is the inner-most layer, made of a soft silicone. This layer also includes the Ballistic Corners which means all four corners have extra shock absorption where you need it the most!
- Advanced three layers of protection.
- Layer 1 - Ballistic shock absorbent polymer.
- Layer 2 - Tough impact resistant polycarbonate shell.
- Layer 3 - Soft silicon, equipped with Ballistic Corners.
- Lay-on-table feature.
- Pocket-able protection.
- Sleek, slim fit to the LG optimus 3D P920 device.
- Additional bump, scratch & drop protection.
- Fully interactive through the case.
Seidio ACTIVE Case and Holster
Product description:
Seidio’s ACTIVE Combo includes a ACTIVE case and ACTIVE holster. The ACTIVE case is thin and protects your LG Thrill 4G/Optimus 3D from scratches and drops, while adding minimal bulk. Slip the case into a secure spring-clip ACTIVE holster for the ultimate carrying solution for your device.
ACTIVE case
- Sleek case that provides scratch protection without adding much bulk
- Precision cut-outs for access to the ports, cameras, and controls
- Unique slide-in design makes putting on and removing your case easy
ACTIVE Holster
- Felt-lined holster with face-in design keeps your LG Thrill 4G/Optimus 3D safe
- Top clip allows for easy access and belt clip swivels in up to seven directions
- For use with ACTIVE case only
Seidio SURFACE Case (with kickstand)
Product description:
The SURFACE case is the right case for those who are looking for sleek protection. This case protects your LG Thrill 4G/Optimus 3D from scratches and drops while adding minimal bulk. Durable plastic is accompanied by our soft-touch coating, which enhances the look of your device without attracting lint.
The built-in kickstand can be used in landscape or portrait orientations for a hands free experience when viewing multimedia, managing photo slideshows, and displaying clocks and calendars.
- Sleek case that provides scratch protection without adding much bulk
- Precision cut-outs for access to the ports, camera, and volume buttons
- Unique slide-together design and interior felt lining
- Kickstand extends ~80 degrees from its point of origin and easily snaps back into place after use
- Compatible with SURFACE holster (not included)
iGadgitz Black Silicone Skin Case Cover with Tyre Tread Design
Product description:
- Custom made for LG Optimus 3D P920 with our classic tyre tread design.
- Supplied with stick-on screen protector.
- Produced from superior quality, shock absorbant, ATS (anti-static) silicone.
- This silicone skin protects your Optimus 3D from nasty chips and scratches.
- Full access to all controls, functions and docking while skinned.
- Cut-outs for camera, flash and headphone port.
ubabic said:
LG CCL-320
A little bit expencive but looks great.Bad thing that i couldn't find it in my country anywhere...
Product description:
Professional and stylish, the CCL-320 is designed specifically to work with you LG Optimus 3D.
The LG CCL-320 is made from genuine leather which provides rugged protection against scratches and knocks, and features a plastic rail on the inside to securely hold your phone in place. The case and the support rail features cut outs which allow you to access all of the ports and features of your LG Optimus 3D without removing it from the case.
This case is a horizontal pouch with an integrated viewing stand, so once you've recorded your high-definition 3D movies you can watch them back in comfort. The case also features a magnetic closure which securely holds the case shut ensuring that, when not in use, your phone will remain protected at all times.
With a case like this, you can confidently store your handset in your pocket, bag or briefcase without worrying if it will get damaged. If your taste is more a classic than funky style, then this is the case for you.
Click to expand...
Click to collapse
hi, how about the link? where can i buy this?
schubeir
schubeir said:
hi, how about the link? where can i buy this?
schubeir
Click to expand...
Click to collapse
It's not so hard to find using search button on Google...
There are many other good cases for our O3D...I will post their reviews when I find some time to research...
MOMAX iCase Pro
Product description:
- 2 in 1 Materials: PC + TPU
- Shock-adsorbing rubber edge & transparent plastic back
- Durable, flame, scratch resistant & washable
- Cut outs openings for your easy access to all ports
- Slide Out the phone easily
- Free Gift: Anti-Glare Screen Protector
Jekod Super Cool Case
Product description:
- Quality imported PC material
- Precise tailoring,closely linked to the body
- Slim design,light as a substance
- Easy assembly and disassembly
- Super dust proof cut design
- Super protection,not easy to break
- Color: black, brown, red, white
ROCK LG Optimus 3D P920 Naked Ultra-thin Case
Product description:
- Extra-strong quality polycarbonate material
- Not easy to deform and difficult to scratch,
- Frosted smooth process
- No fingerprints
- Color: Black, Wine-red
- Attached Gift: Screen protecting film, High-fiber lens-cleaning cloth
MERCURY Jelly Case
Product description:
- Prevents your mobile from scratches, damages and dust.
- Fully compatible with your LG Optimus 3D
- Ultra Slim fit and super light-weight
- Easy access to all controls and ports
I have been given a chance to review some cases for Ringke. I will be doing a full video review as soon as they come in, with plenty of photos to boot. Hope everyone can make a good assessment off of this
(post #2500 for me by the way !!!)
Ringke Max arrived yesterday in the Bumble Bee color variant, kinda reminds me of Tonka trucks. Typical Rinke packaging with a thank you card and their contact info if you encounter any issues. Case is made of PC/TPU and definitely has a sturdy feel to it. The corners are squared, I would assume for shock absorption and a more rugged look. It has a raised lip to protect the screen when it's face down. The in-hand feel is good, a bit bulky for my tastes, but makes it feel closer to the size of my last Note device, the Note 4. Typical cut outs have plenty of room for the OEM accessories, but will not work with the OTG adapters unless you pop the phone up out of the bottom of the case. Biggest fubar for me is the S-Pen slot, the pen cannot come out so easily for me. The tough, thick case prevents the pen from popping out sufficiently, unless you have some long fingernails (which I don't). I would rate this 3/5 simply because it does not suit my needs as far as aesthetics & a slim form factor.
Ringke Flex S arrived last night in the Deep Blue color variant. Came in standard Ringke packaging with contact card. Unit is made of TPU only and has a definite flexibility to it. Case was slightly bowed out of packaging, but went to its intended form with ease once applied. The footprint is slightly smaller than the Max review above, but still feels like a handful. Typical cut outs all across the board, with a slightly roomier S-Pen slot than the Max, but still not enough space for nail biters like me. The top and bottom of the front have a slightly raised lip which to me was more noticeable than the Max. Case has a notch/accessory holes at the bottom of the case to put a strap or charm. The faux leather feels just like you would expect, faux. All in all a good case, but once again not for my needs. Overall I would give it a 3.9 out of 5, scoring slightly higher than the Max for having a better color scheme IMO.
Reserved #3
Reserved #4
I had many cases over the years, I like to have sometimes 10-15 cases for my main phone. So I would concern myself quite picky and having experience with variety of quality and prices of cases. The company did provide the case free in exchange for an honest review.
Galaxy S10 Heavy Duty Case - ArmadilloTek serves the purpose of a rugged phone case extremely well.
It goes on and stays on really tightly, it gives it a nice solid feel like it came that way from the factory.
- It offers dual protection with hard plastic on the outside and TPU/soft rubber on the inside.
-The case is well made, no sharp points from the manufacturing process that is found on many cheap cases. They used good quality materials and has a nice rugged design on the back that actually serves a purpose of helping you hold it even when wearing gloves.
-It does weight a bit, but that's expected when you want the additional protection.
-I was a little disappointed that a screen protector was not included, but there is a lip around the screen that provides protection when putting the phone down face first and from objects hitting the screen.
-The side keys are very responsive and stick out just enough not to be in the way.
-The kick stand is very useful and can be locked into place.
-While it was nice they have flip covers for the headphones jack and USB connector, they are pretty large and can get annoying flipping them up every time you want to use them. At the same time there are no covers for the Mics or speakers, so not sure if its really beneficial. The headphone jack and usb connector opening are very large, I didnt have any issues with the multiple chargers nor headphones used.
- It provide good protection for the rear cameras as well.
- The back on the case is on the slippery side, but the sides have a nice rubbery texture for a good grip.
Overall, if your looking for a rugged case for a S10 phone this one should be top of your list.
https://www.amazon.com/Galaxy-S10-Heavy-Duty-Case/dp/B07MLZY39Y
I received this case for review and I absolutely love it. the design is sleek but rugged so that it feels like it's properly protected as well as being protected. I love that the buttons for the volume are covered by rubber so that you can easily distinguish the fingerprint/power button. The opening mechanism is very smooth and feels great every time. the front of the phone when opened is surrounded by that protective rubber with cutouts exactly where you need them. I like that the logo is placed just so it's there but not in your face. When closed the phone is encased and fully protected with openings only where you need them. The case has a raised area around the outer screen and cameras so that when laid down they don't touch. I love that the outside is kept sleek without unnecessary grooves and ridges because it allows me to attach my grip mount to the back of the phone. I really don't see how you could make a better case. I got it in black which is awesome but wouldn't mind having a color-matched case, that's a minor thing compared to the fact that it is one of the best cases I've used for my Flip 4.