Related
So this morning I was checking out the new choices in my Froyo leak - rooted Captivate, I clicked on every one of them to see what it is and then I clicked on one that said something like user accounts, well ever since then my phone has been a black screen only displaying the top clock and a no signal bar. What should I do next? Unfortunately Im stuck at work with no programs. So Im wondering what would you do, which Odin should I use? Ill be checkin in cause at least I can do this and plan fixing my phone for later
Im guessing you tried pulling the battery?
Sent from my SAMSUNG-SGH-I897 using XDA App
sure did tried the reboot screen.
and the other thing, now the phone wont go into sleep mode so my battery is slowly dying too
try to boot into recovery and clear out the cache...
I did that too and it clears and then i reboot then it goes right back to black screen
The same thing happened to me, but I wasn't digging around in the settings. Like previously mentioned, I booted into recovery, and cleared cache/factory wipe, and it booted back fresh. Luckily, I had a Titanium Backup from a few hours before it happened, so I didn't really lose anything.
I had something like this too. Can you get into Download mode and use Odin to return to stock rom? It took me several tries before Odin worked.
Well I still haven't heard anyone who has completely bricked there samsung captivate yet so I think you'll be alright. Just to be the 1 click Odin when you get home.
I'm pretty new myself at this But I think the only way were really screwed Is if we kill the bootloader.
Sent from my SAMSUNG-SGH-I897 using XDA App
i will try when i get home, im stuck at work unfortunately, at least i know im not the only one, i was also fooling with settings
thank you
Theres been a few people that have fully bricked their captivates... Including me.
If you got your captivate within the last couple weeks be careful using odin with a froyo kernel. Check the Q&A thread for a post titled "phone-pc something" (Using my phone otherwise I'd provide a link)
loserskater said:
Theres been a few people that have fully bricked their captivates... Including me.
If you got your captivate within the last couple weeks be careful using odin with a froyo kernel. Check the Q&A thread for a post titled "phone-pc something" (Using my phone otherwise I'd provide a link)
Click to expand...
Click to collapse
Well that sucks.
Sent from my SAMSUNG-SGH-I897 using XDA App
theMaginator said:
Well I still haven't heard anyone who has completely bricked there samsung captivate yet so I think you'll be alright. Just to be the 1 click Odin when you get home.
I'm pretty new myself at this But I think the only way were really screwed Is if we kill the bootloader.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I had one. OTA update. And I wasn't the only one. I couldn't even get into download mode.
yeah, bricked here too trying to go to Froyo. Sent to Samsung, they fixed it.
theMaginator said:
Well I still haven't heard anyone who has completely bricked there samsung captivate yet so I think you'll be alright. Just to be the 1 click Odin when you get home.
I'm pretty new myself at this But I think the only way were really screwed Is if we kill the bootloader.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
lol its happened to many people, myself included.
It looks like I've done the impossible. I was running cm 7 gb on it and like a dummy went back to stock. Tried flashing continuum 3.1 and phone got stuck in a vibration loop.
Was able to get into d/l mode with jig and tried to odin stock again. Phone screen went all green and odin was stuck at rfs. Can still get into d/l mode with jig but now phone just shuts off while running odin.
I think my biggest issue is that I didn't follow the steps properly and repartition while going back to stock.
I just ordered an inspire 4g, hopefully I will be able to get the cappy up and running again so I can sell one of them later.
Anyone have any ideas? Any help is greatly appreciated. Thanks in advance.
Sent from my SGH-I897 using XDA App
Did you use Odin one click
Sent from my Captivate using XDA Premium App
donharden2002 said:
It looks like I've done the impossible. I was running cm 7 gb on it and like a dummy went back to stock. Tried flashing continuum 3.1 and phone got stuck in a vibration loop.
Was able to get into d/l mode with jig and tried to odin stock again. Phone screen went all green and odin was stuck at rfs. Can still get into d/l mode with jig but now phone just shuts off while running odin.
I think my biggest issue is that I didn't follow the steps properly and repartition while going back to stock.
I just ordered an inspire 4g, hopefully I will be able to get the cappy up and running again so I can sell one of them later.
Anyone have any ideas? Any help is greatly appreciated. Thanks in advance.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Been there, done this, fixed it doing this:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
donharden2002 said:
It looks like I've done the impossible. I was running cm 7 gb on it and like a dummy went back to stock. Tried flashing continuum 3.1 and phone got stuck in a vibration loop.
Was able to get into d/l mode with jig and tried to odin stock again. Phone screen went all green and odin was stuck at rfs. Can still get into d/l mode with jig but now phone just shuts off while running odin.
I think my biggest issue is that I didn't follow the steps properly and repartition while going back to stock.
I just ordered an inspire 4g, hopefully I will be able to get the cappy up and running again so I can sell one of them later.
Anyone have any ideas? Any help is greatly appreciated. Thanks in advance.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Next time just use the one click package
Have you tried pulling the battery for a minute or so before putting the phone in download mode?
I've tried every method I could find. I tried with odin one click but don't think I have everything downloaded that I need to make it all work properly as far as the put files and everything.
I tried finding it to try it but have had no luck. When I tried odin I used a version that I've had since buying the phone. Its a very old version of stock that I think I got from ponack.net last yr some time.
thank you for the reply's. Any other suggestions are greatly appreciated.
Sent from my SGH-I897 using XDA App
thanks
carlsbl said:
Been there, done this, fixed it doing this:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Click to expand...
Click to collapse
When I first replied about trying everything I hadn't read your full reply as i was using my wifes phone. After reading it on the pc I am going to give it a shot.
Will let you know how it goes, thank you for the help.
Tried method above with no success. No biggie, I'm going to send it to a guy to try to get it fixed so I have it as a backup in case I don't like the inspire.
The wife is ready to strangle me over this. Good thing she loves me.
Thank you all for your help. If I get it fixed and like the inspire enough I might end up selling it our keeping it for a play toy.
Thanks again.
Sent from my SGH-I897 using XDA App
donharden2002 said:
I've tried every method I could find. I tried with odin one click but don't think I have everything downloaded that I need to make it all work properly as far as the put files and everything.
I tried finding it to try it but have had no luck. When I tried odin I used a version that I've had since buying the phone. Its a very old version of stock that I think I got from ponack.net last yr some time.
thank you for the reply's. Any other suggestions are greatly appreciated.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Sounds like you're trying the wrong thing. The one-click odin stock doesn't require you to download any extra files, that's why it's a one-click solution. Everything is already packaged into the program, so all you have to do is connect your phone to the computer in download mode and hit the start button in odin, and the software takes care of everything else to get it back to factory defaults.
modest_mandroid said:
Sounds like you're trying the wrong thing. The one-click odin stock doesn't require you to download any extra files, that's why it's a one-click solution. Everything is already packaged into the program, so all you have to do is connect your phone to the computer in download mode and hit the start button in odin, and the software takes care of everything else to get it back to factory defaults.
Click to expand...
Click to collapse
I am able to get it into d/l mode only using a jig but no matter what I try it doesn't seem to work.
I'm going to send it to Josh from mobile tech reviews, he thinks he might be able to fix it.
If not then hopefully I will have learned a lesson from this. That lesson being, don't mess up my inspire or I might end up single again. Not a big fan of that happening.
Thanks again to you all for your time and suggestions. People like you guys are the reason I like xda so much.
Sent from my SGH-I897 using XDA App
donharden2002 said:
I am able to get it into d/l mode only using a jig but no matter what I try it doesn't seem to work.
I'm going to send it to Justin from mobile tech reviews, he thinks he might be able to fix it.
If not then hopefully I will have learned a lesson from this. That lesson being, don't mess up my inspire or I might end up single again. Not a big fan of that happening.
Thanks again to you all for your time and suggestions. People like you guys are the reason I like xda so much.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Weird, never heard of a situation where you could get into download mode but couldn't recover your phone. Keep us up to date about whether you could get it fixed, yeah?
Just picked up my G3, rooted and unlocked bootloader as soon as i got home. Downloaded one of the jelly bean roms and cwm, did a backup then flashed the rom. Everything looked fine but the screen went dark after the boot animation then nothing. Wont power up or reset using the power home volume combo. What the heck do i do now, thanks for any help.
Might be a stupid question, but have you pulled the battery?
Be more specific.
VZW GALAXY S 3 4G LTE
Do YOUR homework first
How about reading all the threads about unbricking. It certainly seems you did not read all the threads about rooting the phone. Do that too.
Finally, and I know this is not that helpful. Don't screw with a new phone. Use it at least for a month to make sure there are no problems with it.
That being said, there is plenty of information about how to handle your problem here in xda. Read all that and try what has already been posted before asking people to solve your self inflicted problem.
BTW when you do ask for help specify exactly what you did, with what script. I.E. don't ask someone to solve your problem without you taking the time to be very specific about how you got there.
pull the battery and go into recovery or odin and fix it.
Dead battery?
Sent from my Transformer TF101 using xda premium
Skubacb - Don't be a douche buddy. If you do not have any thing to add then shut the **** up.
With that being said I have been rooting phones for years, never had an issue when I couldn't get the phone to at least go into recovery. The phone is dead. Battery was fully charged and I have done a battery pull. It is a Verizon G3. I have read the unbrick articles but none explain if the phone will not boot into recovery. If someone could could just point me in the correct direction I would greatly appreciate it.
How did you actually do the flash? Odin? Some other way? As noted, more details are needed.
I flashed the new rom using Rom manager, went in to revovery and flashed it
jmill75 said:
I flashed the new rom using Rom manager, went in to revovery and flashed it
Click to expand...
Click to collapse
I don't believe rom manager is supported for our phone yet. U need to flash straight from recovery. That said I'm sorry I'm not sure where u go from here.
Sent from my SCH-I535 using xda premium
If you can't get into either recovery , or download mode you maybe SOL. However I would take this to IRC and see if someone can help on there. #verizons3 channel.
If the phone is under warranty, one other alternate solution is to take it into a VZW store and say it won't start. Of course I'd only go that route if I couldn't get it going any other way. On the plus side, your could at least confirm that battery didn't die on you.
Looks like you forgot to flash the insecure bootloader, buddy.
Sent from my SCH-I535
Rom manager is supported I flashed clockwork there And the 3 cm nightlies
Sent from my SCH-I535 using Tapatalk 2
Keep this discussion to technical solutions only, please. Leave gray area ethics out of it.
JMink said:
I don't believe rom manager is supported for our phone yet. U need to flash straight from recovery. That said I'm sorry I'm not sure where u go from here.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Completely incorrect.
mikeew83 said:
Rom manager is supported I flashed clockwork there And the 3 cm nightlies
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Me too, been doing it since 6.0.1.2
abissel22 said:
Looks like you forgot to flash the insecure bootloader, buddy.
Sent from my SCH-I535
Click to expand...
Click to collapse
I'm gonna go with this one (possibly). Did you unlock the phone? Sorry, did you say it won't boot into anything? Download/Odin mode? Recovery? Anything at all when you do the vol up/down, home key, and power button?
Idk if this would help but I'd order a downloader jig off ebay for a couple dollars and use that to see if it'll boot to recovery
Sent from my GT-I9300 using xda app-developers app
Me too
I went to turn on my Verizon SGS3 on this morning and nothing happened. I have not even rooted it yet. It was charged when I turned it off 5 minutes before that and even did a battery swap. Phone is completely dead. Will not turn on. I have had it since it first came out, so I called Verizon and they are over-nighting me a "like-new" one. I hope I don't hear more of these stories.
jmill75 said:
Just picked up my G3, rooted and unlocked bootloader as soon as i got home. Downloaded one of the jelly bean roms and cwm, did a backup then flashed the rom. Everything looked fine but the screen went dark after the boot animation then nothing. Wont power up or reset using the power home volume combo. What the heck do i do now, thanks for any help.
Click to expand...
Click to collapse
I had a similar issue. If you do the volume/home/power combo (try both volume buttons separately, i forgot which one worked) and hold them through the initial Samsung logo it should put you into download mode, where you can Odin back to stock. I used PureMotive's Unbrick method in the Dev section (I think) and it took all of 20 min. Just make sure to follow the directions carefully.
Sent from my SCH-I535 using xda app-developers app
Is there a difference is button sequence between recovery and download mode? (I thought it was the same thing)
Sent from my SCH-I535 using XDA Premium App
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
yup your bootloader is still locked
check the downloads thread and use version 1.2.
That means your boatloader is locked. You now must Odin back to stock and start over. Droid style has a guide stickied in the development thread. Follow section 6 of it.
Next time use ez unlock version 1.2 to unlock you boatloader.
Sent from my SGS3 running Eclipse 2.1
downloads list
http://forum.xda-developers.com/showthread.php?t=1850506
tekrhino said:
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
Click to expand...
Click to collapse
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Prophotog said:
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Click to expand...
Click to collapse
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Thanks to everyone!! Looks to be a long night. :>)
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
I lol'ed at your post. A little dramatic, don't you think? He's not even close to bricked. Just Odin from download mode back to stock, and redo the steps with bootloader unlock.
Here is a gift (working ez-unlock v1.2)
http://dl.dropbox.com/u/42057363/com.mmmeff.ez.unlock_3.apk
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Prophotog said:
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Click to expand...
Click to collapse
No need to do the boot chains. Just follow section 5 of this guide and I recommend root 66 for the ROM you flash
http://forum.xda-developers.com/showthread.php?p=28530394
Sent from my SGS3 running Eclipse 2.1
tekrhino said:
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Click to expand...
Click to collapse
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Prophotog said:
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Click to expand...
Click to collapse
And just for future reference, it's Dalvik, not Kelvic
Sent from my SCH-I535 using xda app-developers app
Prophotog said:
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Click to expand...
Click to collapse
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
kintwofan said:
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
Click to expand...
Click to collapse
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Prophotog said:
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Click to expand...
Click to collapse
Cool, I take it you're up and running again. Just make sure you use ez unlock 1.2 next time. And the positive is you're an Odin pro now!
Sent from my SGS3 running Eclipse 2.1
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Alex0826 said:
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Click to expand...
Click to collapse
Sprint kernel is causing the inversion. Flash a vzw kernel. Read first flash later.
Sent from my SCH-I535 using xda app-developers app
Who ever did your flash might not done it right cause ya not supposed to lose a flash like that unless he didn't do things right. I can factory reset mine and I wont loose flash
Sent from my SPH-L900 using Tapatalk 2
okay i upgraded to 4.3 OTA and tried to revert back and soft bricked my phone. I still have access to download mode and the stock recovery. I know now that i can not revert but is there any way of getting it back to 4.3 so i can have a phone again?
thanks for the future help.
This is similar what happened to me. I have never done anything with my phone as far as rooting and I tried reverting to stock 4.1.2. In Odin I kept getting the "Nand Start! Fail (Auth)" because of the locked bootloader I guess. I flashed some other firmware that was unofficial with the locked bootloader and now I get the "unauthorized software detected" and I cant do anything but enter Odin download mode. What should I do?
that is exactly what is happing to me. same error and all.
Once you took the OTA 4.3 you got locked in. No way of going back.
Sent from my SCH-I535 using Tapatalk
I dont want to go back just get rid of the soft brick so i can use it
im having the same problem and need to get it fixed please help anyone???!!!! im leaving for florida in two days and have nothing else. HELP!!!!
If you took the OTA and tried to flash 4.1.2 Odin or unlock bootloader you are Hard bricked , no method or recovering it yet.
If you have stock recovery and download mode , only hope is wait for 4.3 .tar file
Theres no custom recovery I can flash and flash some other software or something?
Elemt said:
Theres no custom recovery I can flash and flash some other software or something?
Click to expand...
Click to collapse
Nope , once you take 4.3 OTA you done , no flashing anything. And once you try to flash recovery or revert to older software you are bricked.
Sorry to be the bear of bad news.
There is a full thread of why and how so many devices have been bricked
http://forum.xda-developers.com/showthread.php?t=2575661
jlyle said:
Nope , once you take 4.3 OTA you done , no flashing anything. And once you try to flash recovery or revert to older software you are bricked.
Sorry to be the bear of bad news.
There is a full thread of why and how so many devices have been bricked
http://forum.xda-developers.com/showthread.php?t=2575661
Click to expand...
Click to collapse
Do you know if anyone is working on a fix? or a .tar file of 4.3?
dvdavid2 said:
Do you know if anyone is working on a fix? or a .tar file of 4.3?
Click to expand...
Click to collapse
Thanks for the info. hopefully a fix will be done soon. And do you know how i should keep to see when the work around is finished .
thanks in advanced guys.
This might give you a chance to unbrick.... possibly
http://forum.xda-developers.com/showthread.php?t=2581166
I got the "unauthorised software detected" on my phone like 3 days ago from messing up on a recovery and all I did was go into the Verizon store and said idk what happened and they called technical support and they asked me if I flashed software on my phone and I just said "no, I just plugged it into my laptop and it did this" so they said they will just send me a new sgs3 and I just got it today.
Pretty simple.
And I don't have insurance .
Hit thanks if I helped
Sent from my SCH-I535 using xda app-developers app
ScubaSteev said:
I got the "unauthorised software detected" on my phone like 3 days ago from messing up on a recovery and all I did was go into the Verizon store and said idk what happened and they called technical support and they asked me if I flashed software on my phone and I just said "no, I just plugged it into my laptop and it did this" so they said they will just send me a new sgs3 and I just got it today.
Pretty simple.
And I don't have insurance .
Hit thanks if I helped
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Funny thing is Verizon can tell if phone was hacked with, and can choose to add the cost of phone to your bill so this method is not highly recommended.
Sent from my SCH-I535 using xda app-developers app
jlyle said:
Funny thing is Verizon can tell if phone was hacked with, and can choose to add the cost of phone to your bill so this method is not highly recommended.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Any break throughs????
dvdavid2 said:
Any break throughs????
Click to expand...
Click to collapse
None that I have seen
Sent from my SCH-I535 using xda app-developers app
jlyle said:
Funny thing is Verizon can tell if phone was hacked with, and can choose to add the cost of phone to your bill so this method is not highly recommended.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Not to mention it is basically fraud, and is the main reason Verizon decided to start locking down phones in the first place.
I understand everyone is taking risks when flashing custom, and flashes can go wrong even when you do everything right, but there is VERY little chance of bricking your phone if you take your time and do a bit of research before you hit any buttons. And if you do manage to brick your phone, man up and pay for a new phone or pay for it to be fixed. Otherwise stop treating your $600 piece of technology like a toy.
BattsNotIncld said:
Not to mention it is basically fraud, and is the main reason Verizon decided to start locking down phones in the first place.
I understand everyone is taking risks when flashing custom, and flashes can go wrong even when you do everything right, but there is VERY little chance of bricking your phone if you take your time and do a bit of research before you hit any buttons. And if you do manage to brick your phone, man up and pay for a new phone or pay for it to be fixed. Otherwise stop treating your $600 piece of technology like a toy.
Click to expand...
Click to collapse
The first time I ever rooted, I was worried about bricking. So i read everything I could find relevant.
Why in the world anyone would flash without reading is beyond me. Every single thread in Verizon Galaxy S3 at least mentions, if not totally devoted, to how bad 4.3 is and if you flash something on it you will brick.
I just don't get it.
Sent from my Last Ever Samsung Device.
If you do a battery pull and start back up in download mode (might take a couple of times to get it to work) then use the Verizon software upgrade assistant it should fix it but you will be stuck with 4.3. Worked for me