Database Info

[Q] Royqueen Firmware

Is there's a similar Firmware that can fit to Royqueen Dual Cam 7inch Tablet
Well the problem starts when I install uberdroid after that the touch screen is not working anymore... :crying:
Here is the specs of the device
Code:
Hardware : WMT
CPU: Via WM8850 Cortex A9 1.2 GHz
Model : T-763
Build number : JRO03H
Build date UTC : 20130131-073909
Android v : 4.1.1
Baseband v: -----
Kernel v : Kernel 0.09.00.00 (Feb 1 2013 - 17:20:38)
Thank You In Advance

laconix00 said:
Is there's a similar Firmware that can fit to Royqueen Dual Cam 7inch Tablet
Well the problem starts when I install uberdroid after that the touch screen is not working anymore... :crying:
Here is the specs of the device
Code:
Hardware : WMT
CPU: Via WM8850 Cortex A9 1.2 GHz
Model : T-763
Build number : JRO03H
Build date UTC : 20130131-073909
Android v : 4.1.1
Baseband v: -----
Kernel v : Kernel 0.09.00.00 (Feb 1 2013 - 17:20:38)
Thank You In Advance
Click to expand...
Click to collapse
I flashed mine with CUDroid, the only problem is that the front camera is not working.
WIN8_8850DC_CUDROID_V12 1.5.0_1
History: Client broke the touch panel, replaced it with other capacitive panel, cudroid works fine except for the camera with flash.

gl3nborj said:
I flashed mine with CUDroid, the only problem is that the front camera is not working.
WIN8_8850DC_CUDROID_V12 1.5.0_1
History: Client broke the touch panel, replaced it with other capacitive panel, cudroid works fine except for the camera with flash.
Click to expand...
Click to collapse
you can modify the sensor or camera using fmaker
fmaker is found inside the config folder.

mine was also Royqueen which has board Id w70 v13 i flash it using uberoid , but the touch not working.
Can you help me guys how to fix this
@gl3nborj can you give me a link for WIN8_8850DC_CUDROID_V12 1.5.0_1 i will try it to my device if this will work.

[Completed] [Q] please help me need firmware jiake g910

:cryinglease i need help to find the firmware for this phone ..
I searched everywhere to no avail .. and also contacted the seller of the product ..
they say do not have a backup firmware and rom ..
I do not know where else to go. You are my last hope ..
plz help me .. if I had another choice I would have selected shy but I did not find ..
company cheated me and many others like me .. this phone bought from aliexpress.com
I was desperate ..
I am very please with you guys to help me
hardware information
Hardware: MT6572
Model: G910
Build number: G910 AA 20140324-152708
Build date UTC: 20140324-072708
Android v: 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V15, 15/01/2014 14:00
Kernel v: 3.4.5 (root @ greate-desktop) (gcc version 4.6.x-google 20,120,106 (prerelease) (GCC)) # 1 SMP Mon March 24 15:24:41 CST 2014
Uboot build v: -----
LCD Driver IC: 1-ili9806c_dsi_cmd
System
Android OS 4.2.2
MTK6572 CPU, dual core Cortex A7, 1.2GHz
256MB ROM
256MB RAM
Screen
Display Size 5.0 Inch
Type TFT, capacitive touch screen
Resolution 854 x 480 pixels

You have not specified why you need the firmware. If there's an issue, please elaborate. Have you tried doing Factory Reset ?
Based on quick Searching, I see that this phone is Manufactured by "Shenzhen Danxiang Technology Co., Ltd."
Your best bet is to contact them for the Firmware.

Perseus71 said:
You have not specified why you need the firmware. If there's an issue, please elaborate. Have you tried doing Factory Reset ?
Based on quick Searching, I see that this phone is Manufactured by "Shenzhen Danxiang Technology Co., Ltd."
Your best bet is to contact them for the Firmware.
Click to expand...
Click to collapse
I do not know what I need I've been confused
First I do a rom backup using MtkDTool v2.4.6 but
for some reason all of a sudden the phone did bootloop
so that makes me panic.
This phone has been root before using framaroot 1.9.1 and it worked
and secondly because bootloop I tried to use another backup rom through sd card but install fall.
and I try to do the flashing using another rom backups, it turns out this phone has been possible for some deadboot hardbrick,
because I am new in android world
and I try to plug the phone into the pc & netbook is already known (undetified device)
or there is a solution to help turn this phone
somehow I thank you
sorry my english is bad

[Completed] Black screen with vertical line (S4 I9500 MTK6589)

Hi, my friends.
I bought S4 I9500 MTK6589 from aliexpress
Air gesture eye control S4 phone 1:1 Android 4.2.2 1GB ram 1280*720 MTK6589 Quad core 5.0" 13mp camera I9500 phone 3G WIFI GPS
The seller give me new rom and i forgot save my oldest rom , i flash with sp flash tool that was rom give to me
(i cant post link because i'm new) mp me
And when download finished in sp flash tool i put battery and i start the phone and i have black screen with vertical lines but I hear the sound pleaze help me.
I try already fluffy rom but i have bootloop. (i do wipe dalvik cache) and i have bootloop too.
Sorry for my english i'm french.
My phone :
Hardware : MT6589 (UNIVERSAL5410(exynos5) is Fake!)
Model : A109
Build number : A109_V1.0_V01_2014-02-12_11:49:47
Build date UTC : 20140212-035019
Android v : 4.2.1
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V7.P11, 2013/05/28 20:28
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 SMP Wed Feb 12 14:54:24 CST 2014
Uboot build v : -----
LCD Driver IC : 1-otm1283a_dsi_lg_lcm_drv

Hi!
There's no section for your device, as it is not actually an S4....you will need to ask for assistance here..
>*Android Development and Hacking*>*Android Q&A, Help & Troubleshooting
Good luck!

[Q] Lenovo S400 alias S4 mini clone ROM

Hello I just got the 45USD Lenovo S400 phone, wich of course is not a Lenovo, it is a modified S4 mini clone with MT6582 CPU, Adreno 305, 256MB RAM. Antutu says rooted: YES. Recovery is in chinese .
Is there any chance to flash some custom ROM compatible with this hardware?
On the phone there is Chinabox logo and also ZBW-PS1 number.
Thank you for suggestions.(if any)

sandisxxx said:
Hello I just got the 45USD Lenovo S400 phone, wich of course is not a Lenovo, it is a modified S4 mini clone with MT6582 CPU, Adreno 305, 256MB RAM. Antutu says rooted: YES. Recovery is in chinese .
Is there any chance to flash some custom ROM compatible with this hardware?
On the phone there is Chinabox logo and also ZBW-PS1 number.
Thank you for suggestions.(if any)
Click to expand...
Click to collapse
Your best bet would be to look at the hardware inside the phone as other "White box" smartphones may share the same hardware and have custom ROMS ready for them.
Unfortunatley this is the issue as their are so many variants of white box brands and not enough developers for them all
Hope I could help and good luck in the search for ROMS

TechMinerUK said:
Your best bet would be to look at the hardware inside the phone as other "White box" smartphones may share the same hardware and have custom ROMS ready for them.
Unfortunatley this is the issue as their are so many variants of white box brands and not enough developers for them all
Hope I could help and good luck in the search for ROMS
Click to expand...
Click to collapse
I can disassemble that, there are 9 screws and it looks like it won't be a problem, when I do this, I will post pics here.
What should I focus for? I mean, the CPU is known, but what else should I focus for?

sandisxxx said:
I can disassemble that, there are 9 screws and it looks like it won't be a problem, when I do this, I will post pics here.
What should I focus for? I mean, the CPU is known, but what else should I focus for?
Click to expand...
Click to collapse
No need to disassemble the phone, just download this app: https://play.google.com/store/apps/details?id=com.dama.hardwareinfo&hl=en

Got that installed unfortunatelly I can't send the report by email, nor skype.

Build ID: JDQ39
Fingerprint alps/e102_lca/e102_lca:4.2.2/JDQ39/1393584801:user/test-keys
CPU: ARMv7 rev3(v7l)
max freq.: 1001 MHz
Cores: 4
Instr.Sets: armeabi-v7a, armeabi
SIMD Instructions : NEON
Sensors:
KXTJ2-1009 3-axis Accelerometer
Vendor Kionix
Proximity Vendor MTK
Light Vendor MTK
RAM
System 217MB
JVM Max 96MB
Inmternal storage 183MB
Any suggestions?
Thank you.

Hardware : MT6572 (MT6582 is Fake!)
Model : Lenovo Caiphone S400
Build number : ALPS.JB3.MP.V1
Build date UTC : 20140228-105537
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P1, 2013/09/02 13:50
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri Feb 28 18:53:00 CST 2014

ehy there, a friend brought to me this phone asking if there is a better rom (multilanguage and smooth). Any ideas? The stock sucks

[Completed] Goophone i6s Not working after installing ROM/ Blackscreen

Hello, guys I'm really confused and I will need help, so today I tried to install a ROM, that didn't go well . So the 1st ROM I installed I got only sound when starting and a black screen with a back light. Tried to install second Rom now the phone isn't turning on. I really need help if someone can send me the same ROM, please.
Here is the information:
Hardware: MT6572
Screen size: 4.7 inch
Model: Iphone 6s
Build Number: ALPS.JB3.MP.V1
Build Date UTC: 20160126-030403
Android v: 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P1.2013/10/11 16:16
Kernel v: 3.4.5 ([email protected]) (gcc version 4.6.x-google20120106 (prerelease) (GCC) ) #1 SMP Tue Jan 26 11:00:07 CST 2016
Give me advice what should I do now

Ok, so I think I found a good ROM but it's for the 5.5 inch version of the phone and the screen with a black line in one of the sides and the rest is something like really zoomed wallpaper of the phone or something like that. Is there a way I can change the resolution to fit 4.7 inch?

Hello, guys good new after hard work I managed to do it! If someone has the same problem just search in needrom.com for Goophone I6S Mod Rom it's a custom mod, very good it has cwm, very smooth system!

Hi,
Thanks for using XDA assist.
Thanks for sharing your success. I can assume that the problem has been solved.
Thread closed.
gsstudios