[Q] S3 GT-i9300 MT6577 What went wrong? - General Questions and Answers

Ok so yesterday i flashed CWM on my S3 GT-i9300 MTK 6577 clone and tried to install a custom rom but it didn't worked the installation was on 30% but for some unknown reason i was returned to CWM.I restarted the phone to check what happen but to my suprise it boot up with nothing changed same rom no brick,everything was working.So i went to sleep after i woke up today,phone was restarting like crazy it shows up the Samsung logo and then it shows an android logo with blue spining and then it shutsdown itself and this happens again and again and again until i remove the battery.I cannot access my CWM anymore just shows up the Samsung logo again and the android logo after that,can't access my download mode either.Please help me

Luckily I hava a Stock ROM for S3 mt6577! Unfortunately, its 1gb file! It took me 10 hrs to upload but it failed . and so I never done uoloading it again ^_^. If you have Flash tool v 1.244 and a stock rom. flash it. That will solve your problem :

Thecurse21 said:
Ok so yesterday i flashed CWM on my S3 GT-i9300 MTK 6577 clone and tried to install a custom rom but it didn't worked the installation was on 30% but for some unknown reason i was returned to CWM.I restarted the phone to check what happen but to my suprise it boot up with nothing changed same rom no brick,everything was working.So i went to sleep after i woke up today,phone was restarting like crazy it shows up the Samsung logo and then it shows an android logo with blue spining and then it shutsdown itself and this happens again and again and again until i remove the battery.I cannot access my CWM anymore just shows up the Samsung logo again and the android logo after that,can't access my download mode either.Please help me
Click to expand...
Click to collapse
hey can you tell me how did you install the cwm on you samsung s3 mt6577 .. this is my email address [email protected]
please your answer will help a lot.. thank you

Ummm try to restore your s3 using kies
Then as i know, use odin to install rom on samsung devices(?) because i use it to flash rom on my gtab 7.7 which is GT-P6800

Thecurse21 said:
Ok so yesterday i flashed CWM on my S3 GT-i9300 MTK 6577 clone and tried to install a custom rom but it didn't worked the installation was on 30% but for some unknown reason i was returned to CWM.I restarted the phone to check what happen but to my suprise it boot up with nothing changed same rom no brick,everything was working.So i went to sleep after i woke up today,phone was restarting like crazy it shows up the Samsung logo and then it shows an android logo with blue spining and then it shutsdown itself and this happens again and again and again until i remove the battery.I cannot access my CWM anymore just shows up the Samsung logo again and the android logo after that,can't access my download mode either.Please help me
Click to expand...
Click to collapse
what do you mean by you can not access the download mode?

Ummm try to restore your s3 using kies
Then as i know, use odin to install rom on samsung devices(?) because i use it to flash rom on my gtab 7.7 which is GT-P6800

Related

help.stuck on startupscreen galaxy 5801

today i flashed galaxy with odin froyo update.odin worked upto 7th step.then my phone stopped on recovery mode.i restarted it through recovery mode as i waited for 10 minutes nothing happened.my phone now stucking at samsung logo.i think i forgotten to put usb mode on debug mode.is there any way to get rid of it.i need urgent help.ddj6 asia firmware
minijis said:
today i flashed galaxy with odin froyo update.odin worked upto 7th step.then my phone stopped on recovery mode.i restarted it through recovery mode as i waited for 10 minutes nothing happened.my phone now stucking at samsung logo.i think i forgotten to put usb mode on debug mode.is there any way to get rid of it.i need urgent help.ddj6 asia firmware
Click to expand...
Click to collapse
it got ok.please delte the thread

[Q] phone bricked samsung galaxy fit

i am using a samsung galaxy fit gt-s5670 rooted with 2.3.4 gingerbread
i had installed rom manager and and from it i had installed the wrong clockwork mod recovery version and after the installation i tried taking a backup of my phone and suddenly my phone went blank.... i cannot see anything in the phone and the screen only stays black without vibration or anything.... please help me out with this.
http://forum.xda-developers.com/forumdisplay.php?f=1261
none of those links helped me out... gave my phone in samsung itself... thnx for the reply
hey!...
im also facing the same problem..................nothing is working....i also tried to backup rom on my galaxy fit............plzz help.........and if im trying to flash the stock one ...how do i get into the download mode when nothing is work...????,....plzz plzzz help
If the screen is blank then just go to samsung and tell then that u were downloading an update from kies and half way suddenly the screen went blank and since then its not switching on..... That should do it.....

[Completed] Can't get galaxy s II into recovery mode nor download mode?

I used to work with a custom ROM with my Samsung galaxy s II,it worked fine but suddenly stopped and its not powering on,its charging and gives the samsung logo but doesn't boot up. I had CWM installed already so I got to recovery mode and tried rebooting phone from here but it took so long so I took off the battery but it doesn't boot up and in addition,it doesn't show the Samsung logo nor charges and its not detected by Odin,not even detected by the computer.Is my phone briced and how do I fix it.thanks in advance.
Hi,
We need to know your devices model number. There are different S2 sections and we need to know your model to point you towards help.
Thanks!

Galaxy Core Prime SM-G361H- Softbricked After Trying To Root

Softbricked Galaxy core prime please help!
I have a Galaxy Core Prime Value Edition (sm-g361h), I was trying to root my phone and a fool told me that sm-g369h and sm-g361h are same models (he means no change) and I believed him and flash twrp recovery for sm-g361h and when I tried to boot but I got this message "recovery is not seandroid enforcing", then I download stock firmware and tried to flash with Odin, I tried all versions of Odin, but it failed in recovery_sboot.bin and I found a thread about frp which is lock and I can't even access my phone software to turn OEM lock on (or whatever it is), now I know that I soft bricked my phone and your help, is there any way to turn off frp or anything else? Please help me
Thanks in advance
Does your phone ever boot in system? What does it shows when you turn it on?
reply
Mr said:
Does your phone ever boot in system? What does it shows when you turn it on?
Click to expand...
Click to collapse
Only Samsung logo with message "recovery is not seandroid enforcing"
MujtabaOria said:
Only Samsung logo with message "recovery is not seandroid enforcing"
Click to expand...
Click to collapse
Try flashing this file...it's the stock kernel...it should make the system boot normally https://drive.google.com/file/d/0B-agjODzYpwPR0VvTnlFNGc4SDA/view?usp=docslist_api
Sent from my GALAXY Core Prime (G361H) using Tapatalk
reply
Mr said:
Try flashing this file...it's the stock kernel...it should make the system boot normally https://drive.google.com/file/d/0B-agjODzYpwPR0VvTnlFNGc4SDA/view?usp=docslist_api
Sent from my GALAXY Core Prime (G361H) using Tapatalk
Click to expand...
Click to collapse
Sorry for late reply and thanks soooooooooooooo much dear friend, now phone is started, and I will never ever listen to any stupid again...
Thanks once again bro.
MujtabaOria said:
Sorry for late reply and thanks soooooooooooooo much dear friend, now phone is started, and I will never ever listen to any stupid again...
Thanks once again bro.
Click to expand...
Click to collapse
No problem bro its a pleasure to help [emoji2] [emoji2]
To prevent flashing wrong files join our official XDA thread everything there will be for our device...
Here is the link http://forum.xda-developers.com/and...e-ve-g361h-t3211451/post63022055#post63022055
Sent from my GALAXY Core Prime (G361H) using Tapatalk
I am having same issue. I tried this process but still same. Any other solution?
I am having same issue. I tried this process but still same. Any other solution?need badly emergency solution....plz any one help me.....
Hi, i have rooted my core prime SMG361h recently with my pc on odin and using twrp,It works well, Things get worst,WHEN I accidently delete the whole OS system of the android phone.I download a custom firmware from (sammobile firmware).directly flashing from Twrp wont work, say MD5 not found,Later on I check again this time twrp wont show up till now,it only show the samsung GAlaxy core prime icon and a RECOVERY ISNOT SEANDROID ENFORCING and at that time i connect the usb cable with pc it charges and on the left top corner there a display of KERNEL IS NOT SEANDROID ENFORCING (this thing never shown while CHARGING when the TWRP was working)So i press the Volume down +power+menu for the download mode the Download mode show up,unfortunately,the device cannot detect by my Pc,(I install the samsung driver from kies as well,insta;; and reinstall)I also Replace the USB cable as well thought the cable might be problem ,it did CHARGE but the pc cannot recognise it.when pc cannot detect the device the odin cannot detct as well....M desperate right now...PLz help...
Hey, I flashed the stock rom but it is still on the start screen.\
Any suggestions?

[HELP] I Got Hard Bricked an GT-S7582

HI! I Have got an s duos 2 and i wanted to install some custom rom on it, and i wanted to do this whitout any computer, and i downloaded rootmaster and tried to root, and it seemd it worked, but while rooting the app crashed and it always did this, and i rebooted and it stuck on Samsung galaxy s duos 2 logo. And it does not entered the recovery mode. It entered odin mode, but unfortunately flashing stock rom did nothing. Now its just charging, and nothing shows on screen. if anyone can help me PLS Comment it!

Categories

Resources