Related
i was really really stupid and decided to try and install darky's resurrected rom on my new sgh-t959v. After doing it and it not going past the 'installing csc' prompt i decided to try and mount a different pit. i got a working setup out of luck, but now my sim card doesn't work. i got a new sim card and still no signal. i only managed to write down the baseband version before messing it up like this. now that i've read that mixing a pit file from one region with a csc file from another is dangerous. i just need the stock pit csc and phone files. it's been driving me nuts because i just got this phone and all of a sudden can't use it. i've learned my lesson but i really need to fix it. i don't think darky's will work on mine since it's so new.
btw i found the source for my phone,(can't put link here because i don't have over 8 posts) my model and version are listed there. the only problem is i'm a noob at developing(getting into it) and can't compile all this stuff. is there a guide to compiling it? i was hoping to compile the source from that site and try to port it. how would i go about making the source into the pit csc and modem files?
sorry for such a ****ty problems guys. hope someone can help thanks in advance.
super buuuuump!!!
bump, i want my foooone herpaderp!
what's the difference between pit files that are 512, 803, 513? what's this number represent?
so i just tried to flash some other 'custom' rom that was perfect for my phone. i tried it with a different pit file that i thought would work. but now the device doesn't respond to anything! i turned it off and it won't turn on at all now not even to download mode. i'm freaking out what do i do!!!
welp i didn't want to wait. just to update everyone i took it to a local tech who flashed it to stock but couldn't fix the fudged bootloader. i messed it up when it failed a rom flash and i pulled it out in the middle of flashing. so i'm sending it back and getting another one by tuesday
yes, i need it too.
Same problem, anyway know where download this firmware???
No Custom ROM
A word to the wise: The Samsung sgh-t959v for t-mobile does not allow you to put a custom ROM. If anyone knows how to, please advice. I have a new sgh-t959v and don't want to make the same mistake of bricking it where "adb reboot download" command didn't even work because the phone died.
I don't know where to post this, I'm coming here all panicked and retarded, so I'm apologizing in advance.
I literally bought my Galaxy S 4G from WIND (Canada) this morning. From what I understood, upgrading the OS was dangerous, all I wanted to do was root... I followed this guide: ht tp ://w ww.gal axyforum s.ne t/forum/off-topic-forum/5053-rooting-tutorial-here-posted-permission-t-mobile-galaxy-s-4g-gingerbread.html (remove spaces)
which I found in a post on these forums. Someone who also was on WIND said it worked fine for them... They were rooted. I foolishly tried it, everything seemed FINE. When I load CWM it can't mount my SD card. I don't know what to do, it's stuck in T-Mobile boot screen loop if I try to exit.. I literally just stopped crying. My dad is going to KILL me if he finds out I ****ed up the new phone I just bought HOURS ago. I don't know what the **** to do, I don't know what's wrong. I need help, please. Anybody know what I can do? I don't care about rooting, I just need my device to work. Please, someone, anyone with any idea, what should I do? I can get back into download mode, and CWM. Is there anything I can do there? There's a recovery guide pinned but it says it's for the T-Mobile version, which I read is the same, can I use that to fix my phone?
This is my first Android device, I've never owned one before. I don't know ****, I shouldn't have tried anything... I just got cocky and made a mistake. I'm usually very good with this kind of stuff. Please someone tell me if there's something I can do to fix this, please!
I'm sorry if I sound stupid, I'm trying not to, I'm just really panicky and stressed right now.
I've tried searching through the forums - I still am searching through them, I'm sorry if I missed a post that can help me.
EDIT: I found someone who is also stuck in a boot loop... He seems to have SD Card issues as well, but doesn't speak English very well, so I don't thing he was able to communicate what his issue was...
Quote:
Originally Posted by GMK63
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode.
Thank you in advance for your Help, for replying and offering to help.
I appriciate it. My phone is Mobillicity carrier just like wind .[/B]
Then, user bhundven replies to him saying:
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki...xy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan
Is what Bryan is saying my solution? I don't think he understood the SD Card mount issue. Does anyone know how to fix that? I really hope to hear from you guys ASAP before my dad catches on... Please. I really need help. I'll search more in the morning, it's 1 AM here.
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's true, just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Sent from my HTC VLE_U using xda app-developers app
lonoguge said:
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Thanks for the slaps, I needed them!
Yes! I think I am still able to get into download mode, atleast I was able to last night (After the loop issue). Also, I formatted (factory reset option or something?) my settings when I was in CWM last night assuming that would change it back to the way it was, or atleast fix the SD mount problem..I hope this doesn't cause any issues.
What should I do when I'm in download mode?
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's great news! It's nice to hear that someone who's phone was also messed was able to repair it.
lonoguge said:
That's true, *just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. *If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Click to expand...
Click to collapse
Where can I get these drivers? Should I download the latest version of Odin?
I'll try this as soon as I get back from taking my little sister to school.
I just want to say again, this is the SGH-T959W from WIND in Canada. It's apparently the same hardware as the SGS4G from T-Mobile, just different software. I hope this isn't a problem.
Thank you both for replying so soon. After tossing and turning in bed for the last 5 hours, barely getting any sleep, it's such a relief to read these posts!
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
getochkn said:
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU!
I really didn't read enough, big mistake, I was just really cocky because I've modded almost every device I own (Wii, PSP, PS3, PS2 various and iDevices [mine, and friends]). Of course, they're all different (Not saying it's all the same thing! ), I just felt very confident because I've never had issues with anything before. At least this is a good learning experience, I've really been put in my pace. I always felt that bricking was something that happened to other people, it doesn't happen to me. I know that sounds stupid, but idk, that's just how I felt. I physically feel sick over this 'whole ordeal (Seriously), I'm such an idiot. >.<'
Thanks for the warning, I won't flash anything! I'm so relieved to hear that there's no permanent damage done, and to be able to speak to someone who's familiar with this specific problem and this specific model of the SGS4G, AND is willing to help me!
Do you know when you'll be able to help me? Of course, take your time, I completely understand that you have other stuff going on, I'm just wondering to see if I can maybe think of some cover up so my dad doesn't find out.
Also, I have a 14 day warranty, is it void now even though the root didn't work? I'm assuming it is.
Edit: Yup, if what jeffsf says is true, it's void.
jeffsf said:
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
Click to expand...
Click to collapse
I'm just very impatient sometimes. I really do enjoy doing this kind of stuff, it's fun for me. I just got really excited and wasn't thinking straight and just went out and tried rooting it. I've wanted an Android for a while now, and have always planned to root it to unlock it's full potential. I've never modded anything else day 1 (and never will again), this is the first time I've done this. I feel terrible about it.
Will do, thanks for helping, jeffsf.
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
hechoen said:
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
Click to expand...
Click to collapse
I feel like they might know. I'm willing to try it as a last resort, I'd like to give getochkn a shot first.
I'll tell my dad what happened after it's fixed. I just can't deal with him stressing me out about it more than I already am.
I will have a package probably tomorrow that will provide as detailed instructions as I can.
getochkn said:
I will have a package probably tomorrow that will provide as detailed instructions as I can.
Click to expand...
Click to collapse
Oh, wow! That's much sooner than I was expecting! Thanks for taking the time to do this for me, it really means a lot. Thank you so much getochkn!
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
getochkn said:
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
Click to expand...
Click to collapse
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
BagelBreath said:
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
Click to expand...
Click to collapse
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
getochkn said:
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
Click to expand...
Click to collapse
Thank you for the quick reply!
It worked! I really can't thank you enough! Thanks again for taking the time to do this!
I think it may have said "Uploading Pit" because it said it again this time, but it didn't encounter a problem when it did that.
I know I have 3 choices, the one I would like to choose is ICS. Would mind pointing me in the direction of an ICS ROM that's compatible with my device? I'm afraid to use something that may not work and mess up my phone again.
EDIT: Actually, I think I'll just stick with this. I just installed the twist kernal and the modem, everything works, I'm rooted and have recovery. I'd rather not mess with it until I'm more experienced with droids.
Thanks again everyone, especially you getochkn! I'm so relieved that my phone is working again! My dad didn't notice that I wasn't using the new phone I got, so I didn't have to cover up or anything.
Anyone there who could help... I've been get hype when i receive my first android device (galaxy tab P6200) so i search for tutorial on how to root and flash new firmawre.. i did everything in the tutorial but suddenly.. odin has stop working. when i boot my P6200 it turns out to be softbrick.. sorry i'am kinda new on android scene i've been on ios scene before o didn't think it would be harder to find a solution on android... ive spent 2 straight days finding downloading firmware ive even search xda for this matter but no luck... i can still access download mode but odin and Heimdall still give me such error that prevents me to fix my device... i'am kinda losing hope so i try to post here to see if its still a chance for me to recover my softbrick device... hope someone could help... insanely beggin....:crying:
userpjay said:
Anyone there who could help... I've been get hype when i receive my first android device (galaxy tab P6200) so i search for tutorial on how to root and flash new firmawre.. i did everything in the tutorial but suddenly.. odin has stop working. when i boot my P6200 it turns out to be softbrick.. sorry i'am kinda new on android scene i've been on ios scene before o didn't think it would be harder to find a solution on android... ive spent 2 straight days finding downloading firmware ive even search xda for this matter but no luck... i can still access download mode but odin and Heimdall still give me such error that prevents me to fix my device... i'am kinda losing hope so i try to post here to see if its still a chance for me to recover my softbrick device... hope someone could help... insanely beggin....:crying:
Click to expand...
Click to collapse
Need more info, exact model number firmware you were on, firmware file you were tryimg to flash, did you check, or uncheck anything in Odin? Download mode is good, you should be OK.
How do you know its softbrick? Bootloop, hang at logo? Which one?, as much data as possible will get you fixed faster.
I had same problem. You need a PIT file for p6200 and use it in odin together with the newest firmware from sammobile.com.
It works for me.
nabile said:
I had same problem. You need a PIT file for p6200 and use it in odin together with the newest firmware from sammobile.com.
It works for me.
Click to expand...
Click to collapse
I have limited knowledge on flashing, but as far as I know, If u r using a 'PIT' file, be sure to check on 'Repartition' Option in Odin (while flashing). If u Flash wid ONLY a md5 file, ensure that 'Re Partition' box is unchecked while flashing. May be u kept Repartition checked while you were not using a PIT file or vice versa.
If that is d case, try flashing again by following a correct process.
So I just revived a replacement phone the other day, it came preloaded with 6.0.1. I wanted to root and flash a rom so I ended up finding a guild online and started to follow it. It had me flash a file via odin and after it would just stick on the tmobile logo with the blue led on. So I looked around and found another recovery file and tried that, now it gets stuck on the first screen with a warning that its not sandroid enforcing or something.
I am having a heck of a hard time finding the files to restore everything back to 6.0.1 so I can have another go but can't seem to find the files I need. I think I need 2 files, one for the boot part and one for the rom?
Please help or i'll be forced to use an iPhone!
Need help plox.
I keep trying firmwares but they fail, what Odin and firmware should I be using?
5$ to whom ever can get me back to stock, $10 to whom ever can then get me rooted and twrp via paypal as a thank you for your time and patience.
Guess this forum is le dead.
Drachnem said:
Need help plox.
I keep trying firmwares but they fail, what Odin and firmware should I be using?
5$ to whom ever can get me back to stock, $10 to whom ever can then get me rooted and twrp via paypal as a thank you for your time and patience.
Click to expand...
Click to collapse
lol you said "guild" and "Plox" you must play an MMO. ;p
Drachnem said:
Need help plox.
I keep trying firmwares but they fail, what Odin and firmware should I be using?
5$ to whom ever can get me back to stock, $10 to whom ever can then get me rooted and twrp via paypal as a thank you for your time and patience.
Click to expand...
Click to collapse
Flash stock firmware from sammobile.com. download most current, extract, place phone in download mode, have a GOOD USB cable, add file to AP section of Odin, and flash. Once you get fixed then I'll help you root or whatever you're trying to do. If you have any issues returning to stock, please copy Odin logs so I can see where Odin failed.
Hi guys,
Not started a thread on XDA for years but I really am stumped.
I have claimed my girlfriends s6 (SM-G920F) after she upgraded and intended to root it and maybe try a few Oreo ROMs etc. After investigation I saw that (I think this is right) I don't need to OEM unlock this version of the device and rooting via Odin is the best way to do it. BTW if I do need to OEM unlock then that might be the solution to my issue, so if some one could clarify that'd be great.
So a week ago I downloaded Odin and also my old favourite CF-AutoRoot after putting in the device details. The package was generated, I unzipped and put it in a folder in my desktop
After putting the device in download mode I run Odin as administrator and plug it in. The device is recognised and I get the blue box to show this.
I then click the AP box and select the image file and click start, everything runs as expected to this point and I get PASS displayed in the info bar. On the phone the progress bar looks like it has not completed and I can see a small portion still to run. On the first try I left phone like this waiting for it reboot for over an hour. I was expecting 5he device to reboot and get the android with the red exclamation point. At this point I restarted manually and saw during the boot process an error message saying Recovery not SE Enforcing in red.
I have read a few posts saying this can be caused by the wrong image being used, so I downloaded the Auto root package again and made sure that it was all correct, but the same thing occurred.
I have been looking and reading for the last week to find a solution, but I'm still in the same position. Can anyone help or point me in the right direction?
If you need any more info let me know.
Thanks in advance
Jon
im in exacltly the same boat pal. was running nanorom on my rooted s6, but had no vr capability and just got some galaxy gear goggles. tried to reflash arter97 kernal and lost my whole setup. ive been in and out of hard brick for last 24hrs and am back now to where you are, i can access download and recoveries via three button combo, but any packages i flash with odin just fail out right.
ive been here before though and usually get out once i find the right stock rom and csc's for my version. iof i find anything ill come back and share it with you pal.
Cheers mate, it's really frustrating. I'll keep looking too and post back if I have any success.
Hi guys, this thread hasn't been responded to so I thought I'd just replied to it to give it a little bump up. I'd much appreciate it if anybody could help me out here.
Thanks again,
Jon
copernicus666 said:
Hi guys, this thread hasn't been responded to so I thought I'd just replied to it to give it a little bump up. I'd much appreciate it if anybody could help me out here.
Thanks again,
Jon
Click to expand...
Click to collapse
Just try bro to reflash full stock rom again by odin and after flash it , reflash cf-autoroot again
also , can you provide more information about your android version and your csc stock rom ?
what a f**k about!!!!
Right then Jon,
sorry for my delay but not the greatest at reponding to things at the best of times, but with my own s6 in a right old state, and a 7y.o and 4 month old in the house, my pc time is limited.
anyways, im guessing you're a bit like me, and you've had your fair share of flashing roms and roots since the days of old! (Galaxy thru and thru for me s 1,3,4,6, plus tabs and watches).
this s6 gt-920f is a completely different kettle of fish mate. where you're at at the minute, if your still stuck in bootloop with no recovery, your gonna want to find twrp recovery, as you know mate, google will be your guide. you flash this just like a rom or the old cwm, download a zip, bang it in ap/pda in odin and let it flash. KEY NOTE IS MAKE SURE ODIN HAS ~"AUTO-REBOOT"~ UNTICKED, UNCHECKED, NO MARK IN THE BOX. THIS IS KEY TO THE RESTORATION PROCESS GOING FORWARD. Once odin shows that the file has flashed and passed, get ready to perform a three button power reset, Home button, Vol DOWN and Power for 8 seconds. when your pc makes the badong sound and the screen goes off, IMMEDIATELY SWITCH TO Vol UP, Home and Power, thus straight into recovery mode, AND WAIT.
You should see the blue and silver TWRP splash screen and then the recovery options. Firstly, wipe and format everything, dalvik, caches and perform a factory reset. twrp should ask you to type yes to confirm, do it, there's nothing there yet any ways. if you get any issues about cant mount data or some jazz, DONT PANIC, use twrp to reformat the partition to ext4, your pc should ping to show reconnection to the phone.
Now whilst still in twrp, nav to the reset options and reboot into download mode. if all has go well, the scren should have the regular greenish odin screen but without all the samsung odin mode in at the top. odin should show the phone as a connected device, you should be able to access your memory card from your pc to transfer rom zips etc and get the phone back up the way you are used to.
if on the other hand you want to get back to vanila stock style android, with the expense of a tonload of bloatware and crapps, you're gonna wanna take a goggle at stuff like "G920F Repair Firmware X.X UK YYY) , Where X.X is 5.1, 6.1, 7.1, depending on the original android version your brick was on, and YYY is your carrier or network operator, off the top of my head they are VOD, TMO, O2U, H3G.
AGAIN A KEY POINT IF YOUR GOING THIS ROUTE, THESE FILES ARE MADE FOR INDIVIDUAL MODELS OF S6 (THERES ABOUT 12 MODEL NUMBERS -YOURS IS AND ALWAYS WILL BE SM-G920F - SO DO NOT EVER STRAY FROM THAT NUMBER!!!! ) THAT MEANS YOU NEED TO BE FINDING FILES LIKE "G920XXU5EXUE 4 files repair firmwares", THESE ARE YOUR SAVIOUR. GET THE ONE THAT MATCHES YOUR PHONE AND CARRIER OR ONE THAT IS AS NEAR AS DAMMIT, AND AGAIN PLEASE MAKE SURE FOR THE LOVE OF YOUR PHONE THAT YOU ONLY GET FILES MARKED G920, ANYTHING ELSE WILL RESULT IN VERY SERIOUS ERRORS.
YOUR ALSO GOING TO NEED SOMETHING CALLED A PIT FILE, EASY TO FIND, LOOK FOR " S6 ZEROFLTE HIDDEN IMG FILE" IN GOOGLE.
USE OUR OLD BUDDY ODIN TO FLASH THE FOUR FILES YOU GOT FROM THE REPAIR FIRMWARE ZIP, WHICH ARE USUALLY LABEL AP, BL, CP AND CSC.. NOW TAP THE PIT TAB IN ODIN (IGNORE THE WARNING) AND NAVIGATE TO THE HIDDEN.IMG FILE YOU GOT AND BANG IT HERE. ON THE OPTIONS TAB YOU WANT TO TICK AUTO REBOOT, REPARTITION, and NAND ERASE ALL. i know, i know, you probably never use it out of some shear panic but right now its kosher.
start the flash and take a break. like a big break. the process is gonna wipe the phone in totalilty, rewrite every bit of code and software and reload like new after about forty minutes.
now, if it doesnt, there are a few things we can look at but am gonna leave it here and hope you can make some use of the ramblings of a lost man. my 6 is currently in an inverted touch bug where if i touch one side of the screen, the opposite side responds so its a proper nightmare, typing anything means that a becomes l, s becomes k etc. thisis down to me drunk flashing the wrong roms for and s6 edge, g925f, hence all my warnings earlier. anyways, i need a reefer and a scran after all this, God, allah, buddah i hope it helps someone.
shiko2007 said:
Just try bro to reflash full stock rom again by odin and after flash it , reflash cf-autoroot again
also , can you provide more information about your android version and your csc stock rom ?
Click to expand...
Click to collapse
Hi, thanks for replying.
I'm on the original stock, I've not flashed any thing just yet. To be honest, I'm not sure it'd work.
The android version is 7.0 and the build is NRD90M.G920FXXS5EQH6
Be glad if you have any advise.
Thanks
copernicus666 said:
Hi, thanks for replying.
I'm on the original stock, I've not flashed any thing just yet. To be honest, I'm not sure it'd work.
The android version is 7.0 and the build is NRD90M.G920FXXS5EQH6
Be glad if you have any advise.
Thanks
Click to expand...
Click to collapse
if your not root yet just download latest your carrier/country firmware
from sammobile
and flash it by odin
but you are probably trip knox so you must root
so the steps you should do :
1-download your carrier/country firmware from sammobile
2-flash it by odin
3-flash cf-auto root to pass bootloop
or
download twrp recovery of g920f and flash it by odin to replace stock recovery then after flash it ,wipe delvik cash then flash su binary
DagsyMc said:
Right then Jon,
sorry for my delay but not the greatest at reponding to things at the best of times, but with my own s6 in a right old state, and a 7y.o and 4 month old in the house, my pc time is limited.
anyways, im guessing you're a bit like me, and you've had your fair share of flashing roms and roots since the days of old! (Galaxy thru and thru for me s 1,3,4,6, plus tabs and watches).
this s6 gt-920f is a completely different kettle of fish mate. where you're at at the minute, if your still stuck in bootloop with no recovery, your gonna want to find twrp recovery, as you know mate, google will be your guide. you flash this just like a rom or the old cwm, download a zip, bang it in ap/pda in odin and let it flash. KEY NOTE IS MAKE SURE ODIN HAS ~"AUTO-REBOOT"~ UNTICKED, UNCHECKED, NO MARK IN THE BOX. THIS IS KEY TO THE RESTORATION PROCESS GOING FORWARD. Once odin shows that the file has flashed and passed, get ready to perform a three button power reset, Home button, Vol DOWN and Power for 8 seconds. when your pc makes the badong sound and the screen goes off, IMMEDIATELY SWITCH TO Vol UP, Home and Power, thus straight into recovery mode, AND WAIT.
You should see the blue and silver TWRP splash screen and then the recovery options. Firstly, wipe and format everything, dalvik, caches and perform a factory reset. twrp should ask you to type yes to confirm, do it, there's nothing there yet any ways. if you get any issues about cant mount data or some jazz, DONT PANIC, use twrp to reformat the partition to ext4, your pc should ping to show reconnection to the phone.
Now whilst still in twrp, nav to the reset options and reboot into download mode. if all has go well, the scren should have the regular greenish odin screen but without all the samsung odin mode in at the top. odin should show the phone as a connected device, you should be able to access your memory card from your pc to transfer rom zips etc and get the phone back up the way you are used to.
if on the other hand you want to get back to vanila stock style android, with the expense of a tonload of bloatware and crapps, you're gonna wanna take a goggle at stuff like "G920F Repair Firmware X.X UK YYY) , Where X.X is 5.1, 6.1, 7.1, depending on the original android version your brick was on, and YYY is your carrier or network operator, off the top of my head they are VOD, TMO, O2U, H3G.
AGAIN A KEY POINT IF YOUR GOING THIS ROUTE, THESE FILES ARE MADE FOR INDIVIDUAL MODELS OF S6 (THERES ABOUT 12 MODEL NUMBERS -YOURS IS AND ALWAYS WILL BE SM-G920F - SO DO NOT EVER STRAY FROM THAT NUMBER!!!! ) THAT MEANS YOU NEED TO BE FINDING FILES LIKE "G920XXU5EXUE 4 files repair firmwares", THESE ARE YOUR SAVIOUR. GET THE ONE THAT MATCHES YOUR PHONE AND CARRIER OR ONE THAT IS AS NEAR AS DAMMIT, AND AGAIN PLEASE MAKE SURE FOR THE LOVE OF YOUR PHONE THAT YOU ONLY GET FILES MARKED G920, ANYTHING ELSE WILL RESULT IN VERY SERIOUS ERRORS.
YOUR ALSO GOING TO NEED SOMETHING CALLED A PIT FILE, EASY TO FIND, LOOK FOR " S6 ZEROFLTE HIDDEN IMG FILE" IN GOOGLE.
USE OUR OLD BUDDY ODIN TO FLASH THE FOUR FILES YOU GOT FROM THE REPAIR FIRMWARE ZIP, WHICH ARE USUALLY LABEL AP, BL, CP AND CSC.. NOW TAP THE PIT TAB IN ODIN (IGNORE THE WARNING) AND NAVIGATE TO THE HIDDEN.IMG FILE YOU GOT AND BANG IT HERE. ON THE OPTIONS TAB YOU WANT TO TICK AUTO REBOOT, REPARTITION, and NAND ERASE ALL. i know, i know, you probably never use it out of some shear panic but right now its kosher.
start the flash and take a break. like a big break. the process is gonna wipe the phone in totalilty, rewrite every bit of code and software and reload like new after about forty minutes.
now, if it doesnt, there are a few things we can look at but am gonna leave it here and hope you can make some use of the ramblings of a lost man. my 6 is currently in an inverted touch bug where if i touch one side of the screen, the opposite side responds so its a proper nightmare, typing anything means that a becomes l, s becomes k etc. thisis down to me drunk flashing the wrong roms for and s6 edge, g925f, hence all my warnings earlier. anyways, i need a reefer and a scran after all this, God, allah, buddah i hope it helps someone.
Click to expand...
Click to collapse
Legendary post! Cheers mate you just made my morning. I knew the XDA guys would pull through.
I'm on my way to work, but I'll give it a crack later.
Cheers bud - Kudos