Hi i have a Lumia 820 with german O2 Branding. The problem is, that O2 wont bring the 1308 update. So i want to unbrand my 820.
Is this possible?
trytogetme said:
Hi i have a Lumia 820 with german O2 Branding. The problem is, that O2 wont bring the 1308 update. So i want to unbrand my 820.
Is this possible?
Click to expand...
Click to collapse
You could try to install other firmware. The firmware "059Q9L8" for Germany.
@nime said:
You could try to install other firmware. The firmware "059Q9L8" for Germany.
Click to expand...
Click to collapse
and how??
Hi, I have managed to debrand my Lumia 820. I used translation from some italian site i have found back then. I don't know how to find that site but i have saved translation. Here it goes:
The OTA update has not arrived yet, but on the server NOKIA upgrade to Portico is present. The following guide is meant to run in one breath the flash and debrand a Nokia Lumia 920, but with the necessary modifications can be adapted to all Nokia and also update 7.8.
First, download the following file:
1. NaviFirmPlus 1.7
2. Nokia_Care_Suite_5.0_2012.45.4.5
To find GIYF!
NaviFirm Unzip to a directory of your choice and install Nokia_Care_Suite_5.0_2012.45.4.5
Afterwards, we must first of all with the NaviFirm:
1. Run executable NaviFirmPlus
2. Products under window scroll down to Nokia Lumia 920 (RM-821)!
3. Below the window choose 1231.5951.1249.1001 Releases
4. Variants under the window to choose your color, in my case BLACK (RM-821_CV_IT_VAR261946_Black_v2_LTE enabled_Black (059Q9W5)
5. Under the Files window to make sure that all files are selected.
6. Click the Download button
7. Wait until all the files are completely downloaded the file FFU will be approximately 1.31GB.
8. When finished, select: C: \ ProgramData \ Nokia \ Packages
9. Create a folder named Products
10. Create a folder named rm-821
11. You should now have a directory like this: C: \ ProgramData \ Nokia \ Packages \ Products \ rm-821 \
12. Navigate to the folder of NaviFirmPlus
13. FW Open the folder and then the folder of the downloaded firmware.
14. Copy the entire contents of the folder and paste it in the folder C: \ ProgramData \ Nokia \ Packages \ Products \ rm-821 \.
NaviFirm
After installing Nokia Care Suite:
1. Start Nokia Care Suite
2. Click Product Support Tool For Store 5.0
3. Click on File
4. Click Open product
5. Choose RM-821 (Nokia Lumia 920)
6. Click on Programming
7. Click Recovery
8. You should see the firmware that you downloaded and copied earlier in the Properties field.
9. Click Start
10. The software will not find the phone, and ask you to restart and click Retry.
prodsupporttool
Directions Phone:
1. Connect your phone to PC
2. Keep the volume down and the power button, click Retry in the pop up window
3. After hearing a vibration in the phone immediately release the volume button and the power button and hold the Volume Up key.
4. Continue to hold the Volume Up button.
5. After about 15 seconds you see the Nokia logo and the software will
svarog84 said:
Hi, I have managed to debrand my Lumia 820. I used translation from some italian site i have found back then. I don't know how to find that site but i have saved translation. Here it goes:
The OTA update has not arrived yet, but on the server NOKIA upgrade to Portico is present. The following guide is meant to run in one breath the flash and debrand a Nokia Lumia 920, but with the necessary modifications can be adapted to all Nokia and also update 7.8.
First, download the following file:
1. NaviFirmPlus 1.7
2. Nokia_Care_Suite_5.0_2012.45.4.5
To find GIYF!
NaviFirm Unzip to a directory of your choice and install Nokia_Care_Suite_5.0_2012.45.4.5
Afterwards, we must first of all with the NaviFirm:
1. Run executable NaviFirmPlus
2. Products under window scroll down to Nokia Lumia 920 (RM-821)!
3. Below the window choose 1231.5951.1249.1001 Releases
4. Variants under the window to choose your color, in my case BLACK (RM-821_CV_IT_VAR261946_Black_v2_LTE enabled_Black (059Q9W5)
5. Under the Files window to make sure that all files are selected.
6. Click the Download button
7. Wait until all the files are completely downloaded the file FFU will be approximately 1.31GB.
8. When finished, select: C: \ ProgramData \ Nokia \ Packages
9. Create a folder named Products
10. Create a folder named rm-821
11. You should now have a directory like this: C: \ ProgramData \ Nokia \ Packages \ Products \ rm-821 \
12. Navigate to the folder of NaviFirmPlus
13. FW Open the folder and then the folder of the downloaded firmware.
14. Copy the entire contents of the folder and paste it in the folder C: \ ProgramData \ Nokia \ Packages \ Products \ rm-821 \.
NaviFirm
After installing Nokia Care Suite:
1. Start Nokia Care Suite
2. Click Product Support Tool For Store 5.0
3. Click on File
4. Click Open product
5. Choose RM-821 (Nokia Lumia 920)
6. Click on Programming
7. Click Recovery
8. You should see the firmware that you downloaded and copied earlier in the Properties field.
9. Click Start
10. The software will not find the phone, and ask you to restart and click Retry.
prodsupporttool
Directions Phone:
1. Connect your phone to PC
2. Keep the volume down and the power button, click Retry in the pop up window
3. After hearing a vibration in the phone immediately release the volume button and the power button and hold the Volume Up key.
4. Continue to hold the Volume Up button.
5. After about 15 seconds you see the Nokia logo and the software will
Click to expand...
Click to collapse
Just a quick question. When you debranded your phone, did it unlock the sim to a different network?
My partners got the 820 locked on t mobile but wants it unlocked. I've done it with galaxy s2 by using a different firmware and also by using simunlock but so far not found a way of unlocking the 820 and as I have not played about with 1 before I'm researching possibilities to unlock it from t mobile even if it means flashing o2 firmware onto it
Sent from my GT-I9505 using xda premium
My phone was SIM unlocked but branded (had operator logo and apps but it could use any SIM card). I think that this method doesn't affect SIM lock, it will remain locked after flashing
svarog84 said:
My phone was SIM unlocked but branded (had operator logo and apps but it could use any SIM card). I think that this method doesn't affect SIM lock, it will remain locked after flashing
Click to expand...
Click to collapse
Thanks for that. I wont tamper with it just yet then and keep researching
Sent from my GT-I9505 using xda premium
NP, I hope that this will help somebody... Good luck with unlocking
Sorry to bump this thread, but since the amber update has been leaked, I have been trying to debrand my AT&T 820. So far I have not had any luck. When I try to flash in NCS, it gives me an error (FFU not for this device) - I've tried about 10 different ROMs, both amber and other.
Has anyone had success with this yet?
darthcircuit said:
Sorry to bump this thread, but since the amber update has been leaked, I have been trying to debrand my AT&T 820. So far I have not had any luck. When I try to flash in NCS, it gives me an error (FFU not for this device) - I've tried about 10 different ROMs, both amber and other.
Has anyone had success with this yet?
Click to expand...
Click to collapse
I've been trying to debrand my AT&T Lumia 820 myself with no success. I wonder if it has been done before?
I've been trying to debrand my AT&T Lumia 820 with no success too. It's beacuse our product code. Our phone is RM-824 with 059M0F3 product code. We can't install FW with another product code. We need to change our phone's product code, but I don't know how! We need a solution for this.
flashing to old or new firmware will unlock the phone to other networks?
just bought a lumia 820 and its locked to EE Orange.
the CSR said i have to pay £20.42 and wait for 20days.
do you guys have other safe ways of unlocking this kind of phone?
product code
hello, i've tried to debrand my at&t lumia 820, the problem remains at the product code, you can't install diferent product code, but lumia 920's users have done it by flashing pre portico rom from rogers, seems that there is a bug there? idk but i want to debrand my lumia and it's already unlocked so at&t holds me and haven't seen any update
Hi
Andresilent said:
hello, i've tried to debrand my at&t lumia 820, the problem remains at the product code, you can't install diferent product code, but lumia 920's users have done it by flashing pre portico rom from rogers, seems that there is a bug there? idk but i want to debrand my lumia and it's already unlocked so at&t holds me and haven't seen any update
Click to expand...
Click to collapse
Are U Pacheco?
RM for lumia 820 with data sense
Hello:
I live in Nicaragua i have a lumia 820 european version from 3 italia the phone is factory unlocked but i need a ROM that comes with data sense and keep my phone unlocked. Because this phone did not have data sense and i need it.
karosuu said:
Hello:
I live in Nicaragua i have a lumia 820 european version from 3 italia the phone is factory unlocked but i need a ROM that comes with data sense and keep my phone unlocked. Because this phone did not have data sense and i need it.
Click to expand...
Click to collapse
Just download Sysapp Pusher from the market and install it from there.
m0ndul said:
Just download Sysapp Pusher from the market and install it from there.
Click to expand...
Click to collapse
Lol.
I am curious as to how you download "Data Sense" via SysApp Pusher, because DS is a Microsoft native EXE/DLL, is not XAP.
Unbrand vodafone italy 820
Hello all,
I have a unlocked 820 but branded with a vodofone italy rom, datasense is not given by vodafone so i want a "belgium" / "NL" version on it.
Now i have checked the list with available roms and downloaded all software to flash it but i dont seem to find a "unlocked not branded" version of the firmware.
Why not ? because the list is soo big and i dont understand all shorts and verbs next to it
I live in belgium - unlocked Lumia 820 - and i have Mobile Vikings as provider.
please anyone ?
fruitdruifje said:
Hello all,
I have a unlocked 820 but branded with a vodofone italy rom, datasense is not given by vodafone so i want a "belgium" / "NL" version on it.
Now i have checked the list with available roms and downloaded all software to flash it but i dont seem to find a "unlocked not branded" version of the firmware.
Why not ? because the list is soo big and i dont understand all shorts and verbs next to it
I live in belgium - unlocked Lumia 820 - and i have Mobile Vikings as provider.
please anyone ?
Click to expand...
Click to collapse
Take this ROM:
Product Type: RM-825
Product Code: 059Q8W8
Full description: 059Q8W8 RM-825 VAR EU BE CV
anaheiim said:
Take this ROM:
Product Type: RM-825
Product Code: 059Q8W8
Full description: 059Q8W8 RM-825 VAR EU BE CV
Click to expand...
Click to collapse
Great ty soo much i will let you know when its "installed",
Still i think its strange that providers may alter the default software, a loading screen oke or a app of its own but just removing default software should be not allouwed
Related
http://www.htc.com/sea/SupportViewNews.aspx?dl_id=755&news_id=338
32A only every 32A machine can upgrade to this rom with a gold card!
This software is suitable for the following devices : HTC Magic
ROM Upgrade with HTC Sense for HTC Magic (For Singapore Only)
Release Date: 2009-11-10
An updated ROM is now available for HTC Magic customers to download. As always, HTC is committed to providing customers with the best possible mobile experience.
Installation Instructions:
ROM Version: 3.03.707.5( For Singapore only)
Improved Functions
This ROM Upgrade for your HTC Magic will let you experience HTC SenseTM on your phone. HTC SenseTM lets you be you with scenes and widgets, you can customize your experience to be any way you like. Discover intuitive experiences that make everything you do on your phone effortless and delightful.
Notice:
1. There are two steps for the RUU:
* First step will upgrade three programs (At the end of this step the screen will show “Boot-Fail” about 5 seconds, and this is the normal scenario, please let the Magic keep running to second step.)
* Second Step will continue updating 5 programs, and it will spend around 10 minutes for the whole upgrade process, please be patient for the upgrade.
2. This is a generic software update. Any additional software or settings provided by your mobile operator or company will be lost. If you require this customization, please contact your supplier first before upgrading.
Please note that this upgrade will erase any data stored on the phone. We recommend that you back up all your data before performing this upgrade.
3. The update will take up to 10 minutes, DO NOT interrupt the update process, make/receive phone calls, disconnect the phone from the PC, or press any buttons until the process has been completed.
1. Hardware Requirements (PC)
1 GHz or higher processor clock speed recommended
512 MB of RAM or higher recommended
Super VGA (800 x 600) or higher-resolution video adapter and monitor
150 MB of available free hard disk space
USB 2.0 is required
2. Software Requirements - Supported Operating Systems (PC)
Windows XP Home Edition Service Pack 2
Windows XP Professional Edition Service Pack 2
Windows XP Media Center Edition Service Pack 2
Microsoft Windows Vista Ultimate Edition
Microsoft Windows Vista Enterprise Edition
Microsoft Windows Vista Business Edition
Microsoft Windows Vista Home Premium Edition
Microsoft Windows Vista Home Basic Edition
3. Installation Instructions
Before you proceed the ROM Update Utility (RUU), please confirm the following items:
(1) This software upgrade is a newer version than what is currently installed on your phone. If it is the same version and your phone is operating normally, there is no need to reinstall the software.
To check what version is installed on your phone, press Home > Menu > Settings > About phone > Build number, and note the Build number.
(2) HTC Sync has been installed on your PC. HTC Sync can be found on the MicroSD card that was shipped with your phone. You can also download and install HTC Sync at www.htc.com/www/support/
(3) Your phone is connected to your PC using a USB cable. The PC must recognize your phone. You will see a sync icon HTC Sync Icon.bmp in the taskbar once the phone has been connected.
(4) Standby and hibernation mode on your PC has been disabled.
(5) Close all running applications on the PC.
(6) The Screen unlock pattern has been disabled, press Home > Menu > Settings > Security and uncheck Require pattern
(7) Make sure that the battery level of the phone is at least 30% (at least 3 green blocks). To check the battery level, tap Home > Menu > Settings > About phone > Status > Battery level.
(8) Once the RUU is downloaded, launch the application on your PC and follow the instructions on screen.
* Click View Readme when executing the ROM Upgrade Utility (RUU) to view detailed upgrade procedure, error message information or Q&A.
downloading
Great news!
somebody share the Serial Number?
imfool said:
somebody share the Serial Number?
Click to expand...
Click to collapse
Singapore G2
SN :HT96LKF04408
Is it Cupcake 1.5 or Donut 1.6?
Cupcake 1.5
cadetnudt said:
Cupcake 1.5
Click to expand...
Click to collapse
u flashed it already or u r speaking the taiwan rom? My notebook is running win7 and the ruu gets always 170 error, need go to office tomorrow to try this rom.
themaskfly said:
u flashed it already or u r speaking the taiwan rom? My notebook is running win7 and the ruu gets always 170 error, need go to office tomorrow to try this rom.
Click to expand...
Click to collapse
Same for me, HTC Magic but on Vista... doesn't work
downloading... hope my malaysian magic can b updated...
The ROM is understandably pretty much identical to the Taiwanese, except for the obvious changes (and some not so obvious, like some apps and widgets missing - Plurk or Stocks, for example).
Oh, and it also of course contains the same perfected SPL, so...think about it before updating.
Can I use this rom on Polish HTC Magic, will i still have polish language in my android?
dirt77 said:
Can I use this rom on Polish HTC Magic, will i still have polish language in my android?
Click to expand...
Click to collapse
Nope, this works on Singapore magic only
This is for 32A i suppose...
Thanks a lot guys! Just wanna know, does this update include all the Google services?
Especially the Market?
Case_ said:
The ROM is understandably pretty much identical to the Taiwanese, except for the obvious changes (and some not so obvious, like some apps and widgets missing - Plurk or Stocks, for example).
Oh, and it also of course contains the same perfected SPL, so...think about it before updating.
Click to expand...
Click to collapse
How to deal with the SPL？
samhain937 said:
Thanks a lot guys! Just wanna know, does this update include all the Google services?
Especially the Market?
Click to expand...
Click to collapse
yes i see market inside. however i can't find ebuddy on the market...
can i use it for 32b
funnycow said:
yes i see market inside. however i can't find ebuddy on the market...
Click to expand...
Click to collapse
can you tell if this is for 32b or 32a
It's for 32A... My Magic is from singapore and I'm able to download the update... I used the serial of my magic and I was able to download it... So, I think this might work for me right??? I'm downloading this right now...
Can anybody tell me if it's secure to install it???
Remember that I'm able to download the rom with the serial number of my magic...
:No-Frost: said:
It's for 32A... My Magic is from singapore and I'm able to download the update... I used the serial of my magic and I was able to download it... So, I think this might work for me right??? I'm downloading this right now...
Can anybody tell me if it's secure to install it???
Remember that I'm able to download the rom with the serial number of my magic...
Click to expand...
Click to collapse
that's mean i can't use it for 32b
I have the Verizon HTC Trophy with mango beta 2, and I'm trying to go back to NoDo. When I click on my backup file, I get the error, "Error: The installed version of the tool (4.7.1404) needs to be updated to match the Zune version (4.8.2098). Please install the tool version 4.8.2098." When I go to the Zune settings, phone update, there is no restore option. Any suggestions?
I have had the same problem and I have figured out a way to get around it.
1. You have to uninstall the zune client.
2. Download the zune client 4.7.1404 I cant provide links cause it wont let me so you have to find it. google zune client 4.7.1404 download.
3. Make sure that your restore folder is in the c: Drive it will be named premangostate2
4. Install the 4.7.1404 without having the internet connected. Having the internet connected will update to a higher version.
5. Make a copy of the the contents inside this folder. (it will have a series of values) copy this folder to the the windows phone update folder. this folder will be in appdata/local/windows folder. If done correctly you will have 2 copies.
6. run the restore.bat file that should have came with the mango beta 2 update.
7. when asked to overwrite select yes.
8 This should restore your HTC Trophy back to the NODO so you can update your phone to Mango from your carrier.
I have tried everything around and this is the one that worked for me. I know you asked a bit ago but if anyone else needs this then they will find it by search.
If there is no windows phone update folder you may have to connect your phone or restart your computer.
Trying to find a way to flash tango rom to other devices. All I need from you is the following.
1. Must have a Lumia device with tango OS installed (specify if shipped with rom or if you upgraded and how)
2. Must have interop unlocked device
3. Must have a registry editor, preferably Heathcliffs root tools
Okay, go into the registry editor and follow this path
Local Machine>System>Platform>DeviceTargetingInfo
In this folder please tell me your values/strings for the following
MobileOperator:
MODeviceName:
MOName:
OEMDeviceName:
OEMName:
Thank you so much.
Will let everyone know if I succeed
I have a Lumia 822 on T-Mobile. I can't get SMS or MMS to work. I've tried everything that I can possibly try! My question is can I flash T-Mobile's Lumia 810 firmware on my 822? The other thing is, I tried to download Nokia Care Suite. I was successful in downloading it, but I don't know how to install the package manager. Can somebody please help?
Thank you in advance.
I'm not sure if this might work but try this:
1. Download and install Lumia Pusher from the WP8 Store (or Marketplace).
2. Open Lumia Pusher and install "network+".
3. Still on the Lumia Pusher, install "access point".
4. Go to settings and configure your phone.
KimWinter said:
I'm not sure if this might work but try this:
1. Download and install Lumia Pusher from the WP8 Store (or Marketplace).
2. Open Lumia Pusher and install "network+".
3. Still on the Lumia Pusher, install "access point".
4. Go to settings and configure your phone.
Click to expand...
Click to collapse
was going to update that there is an update on Access Point, update the app through Lumia Pusher, and then go to settings, scroll all the way to bottom chose APN settings, Tmoblie should be there and underneath it should read "actvie" if not, press and hold on it untill menu pops up to activate it. done.
I did that this weekend. on portico update
Outgoing sms issue is known to portico update.. You should downgrade to be able to get it work.. And please dont even try to flash that of lumia 810's firmware. Try to search on forums about the issue.. There are links for firmwares there, and flashing instructions too.
I know there are multiple fixes out there for getting Windows 8.1 to detect HTC phones while in fastboot mode, but some are dependent on whether you have an Intel or AMD processor and USB 2.0 or 3.0. This is the latest fix, and should work on all types of PCs and HTC phones. It worked for me on my computer with Windows 8.1 x64, Intel processor, and USB 2.0.
This is a repost of a thread by @izi501 in the Wildfire S forums; I just wanted to help spread the word. Credit goes to Auth from 4PDA and @niks255.
The issue has something to do with the BOS descriptor in Windows 8.1. It has been fixed in update rollup 2967917.
Instructions:
1. Install update rollup 2967917 for Windows 8.1.
- To check if you have the update installed already, go to Control Panel > Programs and Features > View Installed Updates > type "KB2967917" in the search box.
- If you don't have the update installed, open Windows Update to install it.2. Download the attached file Fastboot.reg.txt and change the extension to Fastboot.reg.
3. Right click on the Start button and choose Command Prompt (admin). Then type "regedit" and press enter.
4. Go to File > Import > choose Fastboot.reg.
That should be it; Windows 8.1 should now be able to detect your phone when in fastboot mode!
Yes it will fix this issue for all PC's. Read about it here http://blogs.msdn.com/b/usbcoreblog...8-0-but-fail-on-windows-8-1-with-code-43.aspx
I'm wondering why my reg file works for One S. Your device must have a different code, so it means a different registry key. Did you check it for yourself?
niks255 said:
Yes it will fix this issue for all PC's. Read about it here http://blogs.msdn.com/b/usbcoreblog...8-0-but-fail-on-windows-8-1-with-code-43.aspx
I'm wondering why my reg file works for One S. Your device must have a different code, so it means a different registry key. Did you check it for yourself?
Click to expand...
Click to collapse
I wasn't aware that the reg file was supposed to be device-specific. I didn't check for codes specific to the One S, but I used your reg file and it worked fine for me. I don't have the phone anymore, so I can't check. Maybe someone else can verify the registry keys.
Anyway, thanks for the fix!
Sent from my OnePlus One using Tapatalk
It works.
Thanks you
You saved my day
THANK YOU VERY MUCH, SIR !!!
Is this for all htc devices?
EDIT: nvm it worked!!!
KkdGab said:
Is this for all htc devices?
EDIT: nvm it worked!!!
Click to expand...
Click to collapse
it should work for every single android device having problems with fastboot
Works on Windows Technical Preview as well!!
dr3amsindigital said:
i know there are multiple fixes out there for getting windows 8.1 to detect htc phones while in fastboot mode, but some are dependent on whether you have an intel or amd processor and usb 2.0 or 3.0. This is the latest fix, and should work on all types of pcs. It worked for me on my computer with windows 8.1 x64, intel processor, and usb 2.0. I have a s4 one s; i'm not sure if this works with s3.
This is a repost of a thread by @izi501 in the wildfire s forums; i just wanted to help spread the word. Credit goes to auth from 4pda and @niks255.
The issue has something to do with the bos descriptor in windows 8.1. It has been fixed in update rollup 2967917.
instructions:
install update rollup 2967917 for windows 8.1
to check if you have the update installed already, go to control panel > programs and features > view installed updates > type "kb2967917" in the search box.
if you don't have the update installed, open windows update to install it.
download the attached file fastboot.reg.txt and change the extension to fastboot.reg.
right click on the start button and choose command prompt (admin). Then type "regedit" and press enter.
go to file > import > choose fastboot.reg.
that should be it; windows 8.1 should now be able to detect your phone when in fastboot mode! This will probably be one of my last posts here. I needed this fix to restore to stock, since i just sold my phone (i've moved on to the oneplus one). Thanks to all the devs out there that have made the htc one s so great!
Click to expand...
Click to collapse
perfect
thanks its running:laugh:
thanks so much, it works great!!
Thankyou
I read lots on this forum, but I signed up just so I could say thank you so very, very much for this post! I spent about 12 hours straight trying to get the fastboot driver to work for my HTC Sensation which I wanted to unlock and upgrade. I read lots and lots and lots of posts and tried out lots of suggested fixes but this was the only thing that worked and it was delightfully simple, even though I'd never made any changes to the registry before. I am forever in your debt!
thanks so much for this. it worked for my at&t htc one x
Been wanting to update my HTC One Mini and couldn't cause of this one fastboot fix, thanks so much!!!
dr3amsINdigital said:
I know there are multiple fixes out there for getting Windows 8.1 to detect HTC phones while in fastboot mode, but some are dependent on whether you have an Intel or AMD processor and USB 2.0 or 3.0. This is the latest fix, and should work on all types of PCs. It worked for me on my computer with Windows 8.1 x64, Intel processor, and USB 2.0. I have a S4 One S; I'm not sure if this works with S3.
This is a repost of a thread by @izi501 in the Wildfire S forums; I just wanted to help spread the word. Credit goes to Auth from 4PDA and @niks255.
The issue has something to do with the BOS descriptor in Windows 8.1. It has been fixed in update rollup 2967917.
Instructions:
Install update rollup 2967917 for Windows 8.1
To check if you have the update installed already, go to Control Panel > Programs and Features > View Installed Updates > type "KB2967917" in the search box.
If you don't have the update installed, open Windows Update to install it.
Download the attached file Fastboot.reg.txt and change the extension to Fastboot.reg.
Right click on the Start button and choose Command Prompt (admin). Then type "regedit" and press enter.
Go to File > Import > choose Fastboot.reg.
That should be it; Windows 8.1 should now be able to detect your phone when in fastboot mode! This will probably be one of my last posts here. I needed this fix to restore to stock, since I just sold my phone (I've moved on to the OnePlus One). Thanks to all the devs out there that have made the HTC One S so great!
Click to expand...
Click to collapse
After hours of researching on how the f*ck I can make fastboot work for my old Desire S, this did the trick. A million and more thanks for you.
OMG, finally I can connect my htc one to win8.1.
Million thanks!
Man, I wish I have found your post 3h ago ) Thanks to your reg file now I have fastboot working on Win 8.1
Respect, dr3amsINdigital !
vertycall said:
Man, I wish I have found your post 3h ago ) Thanks to your reg file now I have fastboot working on Win 8.1
Respect, dr3amsINdigital !
Click to expand...
Click to collapse
link not working brother
sivahariprasad said:
link not working brother
Click to expand...
Click to collapse
What link? Everything works for me.
dr3amsINdigital said:
What link? Everything works for me.
Click to expand...
Click to collapse
I am not able to download it. The text file just opens inside the browser.