Guys.... i found that the fone felt faster without root.....ONCE wen i applied root on stock clean jb rom(currently using stock DDULP8) i experienced fewer lags on the first boot itself ..... nd on overtime usage i experienced a sudden slowdown(eg. the capacitive buttons becomes unresponsive for fewer mins,vibrates after few years ),dono wats the reason for this though...........i noticed this on almost all stock roms....correct me if this was discussed already........nd also is there any other method for rooting,if so please share it guys.......
AGAIN, THE MAIN PROBLEM HERE FOR ME IS THE BUTTONS GO UNRESPONSIVE FOR FEW MINS & CAMERA APP stucks like hell ;(,if this is gone i have no problem for my s advance........pls guys reply how to fix this........my previous device was lg-p500 which was awesome without any problems,i ran subway surfers smoothly than on this phone,though it was armv6 nd they goy even almost stable jb 4.2.2..........problem is only after root.....& a script for nano shell binary 4cyl mod gives root problems oly fa our device since no other devices have such problems,i assume this problem is mainly coz of our root method....
kamalnath93 said:
Guys.... i found that the fone felt faster without root.....ONCE wen i applied root on stock clean jb rom(currently using stock DDULP8) i experienced fewer lags on the first boot itself ..... nd on overtime usage i experienced a sudden slowdown(eg. the capacitive buttons becomes unresponsive for fewer mins,vibrates after few years ),dono wats the reason for this though...........i noticed this on almost all stock roms....correct me if this was discussed already........nd also is there any other method for rooting,if so please share it guys.......
AGAIN, THE MAIN PROBLEM HERE FOR ME IS THE BUTTONS GO UNRESPONSIVE FOR FEW MINS & CAMERA APP stucks like hell ;(,if this is gone i have no problem for my s advance........pls guys reply how to fix this........my previous device was lg-p500 which was awesome without any problems,i ran subway surfers smoothly than on this phone,though it was armv6 nd they goy even almost stable jb 4.2.2..........
Click to expand...
Click to collapse
Have you tried wiping data, factory reset??
Sent from my GT-I9070 using xda app-developers app
Nikko028 said:
Have you tried wiping data, factory reset??
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Yep.......after flashing every stock jb i do........
Uninstall bloatware with titanium backup.
You can try install kernel and custom roms. Since you've rooted might as well use the privilege of rooting.
arffrhn said:
You can try install kernel and custom roms. Since you've rooted might as well use the privilege of rooting.
Click to expand...
Click to collapse
Haha \o/zzz!!!!,man iam not a noob,i have some experince on android,i have tried every possible combinations(kernels,debloting,tweaks nd without these too)......... but i have many apps installed as user...... used greenify too doesnt help....... i assume this is a samsung's bug,these like slwdwns doesnt happen in CM10 but it is with bugs........ NO OFFENCE pls
kamalnath93 said:
Haha \o/zzz!!!!,man iam not a noob,i have some experince on android,i have tried every possible combinations(kernels,debloting,tweaks nd without these too)......... but i have many apps installed as user...... used greenify too doesnt help....... i assume this is a samsung's bug,these like slwdwns doesnt happen in CM10 but it is with bugs........ NO OFFENCE pls
Click to expand...
Click to collapse
None taken. You said you noticed it on stock roms. So I assumed you don't try any custom roms. But it surely is not because of root method cause I don't have any slowdown/lag issue at all after using custom rom. On stock yes..after a while it will slow down but on custom none at all.
try don't install 4Cyl ...
Try this combo:
lightjb 1.2 Rom+Cocore 6.2+on demand/sio, if this doesn't work, then you might have hardware issues :what:
Sent from my GT-I9070 using Tapatalk 2
Ty guyz!!!! testing jellymod4.0 with cocore 6.2 no issues found till now........but camera just lags as stock
Yea same problem of lag with all possible kernel and stock firmware combinations
kamalnath93 said:
Guys.... i found that the fone felt faster without root.....ONCE wen i applied root on stock clean jb rom(currently using stock DDULP8) i experienced fewer lags on the first boot itself ..... nd on overtime usage i experienced a sudden slowdown(eg. the capacitive buttons becomes unresponsive for fewer mins,vibrates after few years ),dono wats the reason for this though...........i noticed this on almost all stock roms....correct me if this was discussed already........nd also is there any other method for rooting,if so please share it guys.......
AGAIN, THE MAIN PROBLEM HERE FOR ME IS THE BUTTONS GO UNRESPONSIVE FOR FEW MINS & CAMERA APP stucks like hell ;(,if this is gone i have no problem for my s advance........pls guys reply how to fix this........my previous device was lg-p500 which was awesome without any problems,i ran subway surfers smoothly than on this phone,though it was armv6 nd they goy even almost stable jb 4.2.2..........problem is only after root.....& a script for nano shell binary 4cyl mod gives root problems oly fa our device since no other devices have such problems,i assume this problem is mainly coz of our root method....
Click to expand...
Click to collapse
Yeah kinda agree with you they say install 4cyl, this and this but it does not help bigtime maybe lets just wait for a stable CM
Related
Hello,
my i9003 have a problem, every firmware who I flashed isn't smooth. It's smooth since 10 minutes after that the phone become to laggy (keyboard and scrolling inusable because of the laggy ...).
The only firmware who don't laggy was the XXKPE and now, after two days of use even him become to laggy !!
I begin to despair, how I can have a smooth phone ? (I don't care about the CF Root or this thing, I want only a smooth phone)
May be it's my flash process ? Someone can suggest me one ?
Thanks for your answers, I hope someone can help me.
Ryryoku said:
Hello,
my i9003 have a problem, every firmware who I flashed isn't smooth. It's smooth since 10 minutes after that the phone become to laggy (keyboard and scrolling inusable because of the laggy ...).
The only firmware who don't laggy was the XXKPE and now, after two days of use even him become to laggy !!
I begin to despair, how I can have a smooth phone ? (I don't care about the CF Root or this thing, I want only a smooth phone)
May be it's my flash process ? Someone can suggest me one ?
Thanks for your answers, I hope someone can help me.
Click to expand...
Click to collapse
i hope u know about custom roms
Thanks for the reply.
Don't love at all the custom skin rom ... But what custom rom is smooth ?
Any other ideas ?
I don't understand what is the matter, why after few hours the phone begin to laggy. I flashed XXKPQ it's the same (has KPE,KPH,KPN,KPM....).
I flash twice XXKPE, flash XXKPQ, factory reset, flasher CF Root and I cleared the Cache and Dalvik Cache. I deoxeded, did backup, Ext4, and restored backup and laggy after few minutes/hours.
I tryed to flash stock ROM without CF Root/ext/Deodex it's the same. I try to download no APK it's the same...
Hope someone can help me.
Deodexing usually causes some home screen scroll lag for me. Don't deodex. Also don't apply any tweaks in your CF-ROOT tweaks app, as some of the tweaks ends up causing the phone to lag after a few minutes of use!
Sent from my GT-I9003 using XDA App
Thanks for the reply.
I tryed without any tweaks or deodex or cf root it's the same. Actually I am with XXKPQ no tweaks and no deodex it's laggy.
I think a file or a thing like that is corrupt.
Any other ideas ?
Ryryoku said:
Thanks for the reply.
I tryed without any tweaks or deodex or cf root it's the same. Actually I am with XXKPQ no tweaks and no deodex it's laggy.
I think a file or a thing like that is corrupt.
Any other ideas ?
Click to expand...
Click to collapse
u can try to put some tweaks...like sas
sakindia123 said:
u can try to put some tweaks...like sas
Click to expand...
Click to collapse
I think the laggy are independant from the tweaks because of the laggy come without the cf root. So I think there is a thing who create the laggy on all the rom (I hope u understand what I meaning)
But I will try to able some tweaks.
Hmmm... It's weird... Why don't you flash back to your region's stock ROM (Froyo) and see if the problem still persists. If it (or even if you think there are any problems) just send it to the service center and get it repaired/replaced.
Sent from my GT-I9003 using XDA App
Erahgon said:
Hmmm... It's weird... Why don't you flash back to your region's stock ROM (Froyo) and see if the problem still persists. If it (or even if you think there are any problems) just send it to the service center and get it repaired/replaced.
Sent from my GT-I9003 using XDA App[/QUOTE
Okay thanks I will try. Only one question, the Europe region is "XX" (precisely in France) ? And I find the ROM on Samfirmware ?
Click to expand...
Click to collapse
I think youre too exposed to iphones. We dont have that smoothness. Even stock fws will have the minimal lags ang hiccups.
Sent from my GT-I9003 using XDA App
kemistry01 said:
I think youre too exposed to iphones. We dont have that smoothness. Even stock fws will have the minimal lags ang hiccups.
Sent from my GT-I9003 using XDA App
Click to expand...
Click to collapse
I don't think that. Yesteday I flashed to KPQ, since 2-3 hours all was perfect after that the laggy begin. And it'snt "minimal lag" but huge lag, when it's like that the keyboard show the letter 1sec (or more) after I tap on it...
The homescreen it's the same, need to slide 2-3 time for change, or doens't change at all and tap on a apps.
This is not normal at all (even my S5230 was better no need iphone lol).
Sorry but I don't know where find the Froyo for Europe. SamFirmware close :/
I'm downloading I9003XEKE1 does it work in Europe ? All firmware who I downloaded was "XX" I have a doubt
Ryryoku said:
Sorry but I don't know where find the Froyo for Europe. SamFirmware close :/
I'm downloading I9003XEKE1 does it work in Europe ? All firmware who I downloaded was "XX" I have a doubt
Click to expand...
Click to collapse
i bought my 9003 from Italy and i had I9003XXKB1 (froyo)
so try I9003XXKB1 from
http://forum.xda-developers.com/showthread.php?t=1004647
techindia2010 said:
i bought my 9003 from Italy and i had I9003XXKB1 (froyo)
so try I9003XXKB1 from
http://forum.xda-developers.com/showthread.php?t=1004647
Click to expand...
Click to collapse
Thanks very much. I watched on Google and I found XXKB3 I downloaded and installed it and it's just perfect. Super smooth, no bug. I don't know if I try to flash Gingerbread again it isnt seems stable like Froyo ...
Do u have any suggestions ?
I understand now. I am using gingerbread now and i can tell that its smooth also. I thibk your problem is the wiping process. After every rom do not forget to factory reset, wipe cache partition then wipe dalvik cache
Sent from my GT-I9003 using XDA App
Although I find my experience with cranium kph to be responsive and smooth, enabling any live wallpaper makes scrolling through the app drawer a tad bit slower
Sent from my GT-I9003 using XDA App
sicmofo said:
Although I find my experience with cranium kph to be responsive and smooth, enabling any live wallpaper makes scrolling through the app drawer a tad bit slower
Sent from my GT-I9003 using XDA App
Click to expand...
Click to collapse
Of course live walls will use ram and cpu. Making lags
Sent from my GT-I9003 using XDA App
i guess you have an app working wrong and that's why it is laggy. It allways happen after you copy your backup data or apps?
I backuped the same apps who I used in Gingerbread on Froyo, and Froyo work well. I will retry a last time a flash on Gingerbread and if it's laggy I keep Froyo.
I had that screen dying this rom also... on build 3 as many more i´ve noticed.
I flashed that earlier kernel after not succesful try on that build 3 kernel.
http://dl.dropbox.com/u/12943198/ics22.zip by arakmar.
Normally build3 trough odin and flashed this ics22.zip trough cwm
Big thanks goes to MrComputerRevo for posting this:
"So I had no waking up issue so I falshed another kernel, but that decreased perfomance and sound was laggy... So I thought what if I flash the kernel that arakmar posted a couple pages ago... Guess what: I don't have lockscreen or waking up issues, sound is perfect and headset works! Try it!"
I followed these instructions and it really helped!
hopefully this helps someone too
nice news i needed to hear that to change to cm9
thanks a lot !!
by the way how do you see the battery backup? similar to cm7? or worse?
siruz said:
nice news i needed to hear that to change to cm9
thanks a lot !!
by the way how do you see the battery backup? similar to cm7? or worse?
Click to expand...
Click to collapse
Nice to hear
Well my whole g3 is only 6months old so no battery issues on that case. But i noticed on cm7 that 1.3 hv kernell was the best, didn' t drain battery so fast. If u want more power/speed ( over 1ghz) with different kernell prepare to lose your battery faster.
On cm9 i'm using the same as 1.3hv stats, max 1ghz on processor speed. My battery has lasted on this for last 4 days, since i flashed this rom.
Sent from my GT-I5800 using xda premium
thanks for th info mate
i flashed cm9 with arakmar's kernel and everything is ok..but i want to get rid off the gapps that i dont need , i only use market and gmail..but i dont want to delete anything vital for the phone or these two apps :/ any idea what should i keep and what not?
none of the google apps is vital for the phone
Imo u can delete what u dont need, gapps are not vital for the phone, many roms doesn't have any of google apps but many devs put up a link for every one who wants gapps on their phone
Sent from my GT-I5800 using xda premium
I have jb 4.1.2 vrbmb1 i notice my ram always at 1gb even wen i close all apps and lock my fone also my keyboard acts up on stock browser after the update of 4.1.2 so i did a factory reset problem still remains so now im looking to root bt i found vzn is sending out an update shoukd i wait or go tru root
twistedillutions said:
I have jb 4.1.2 vrbmb1 i notice my ram always at 1gb even wen i close all apps and lock my fone also my keyboard acts up on stock browser after the update of 4.1.2 so i did a factory reset problem still remains so now im looking to root bt i found vzn is sending out an update shoukd i wait or go tru root
Click to expand...
Click to collapse
The VRBMB1 had issues with signal loss and other issues, including battery drainage... so Verizon actually pulled that update back and are looking into fixing it.
I would just root it. Once rooted, be sure to back up the stock OTA ROM that you're on just in case you need it later on. Back one up to the SD card and then make another backup onto the external SD card, if you have one, to be safe.
Flash another ROM and get rid of the issues.
Sent from my SCH-I535
RBarnett09 said:
The VRBMD3 had issues with signal loss and other issues, including battery drainage... so Verizon actually pulled that update back and are looking into fixing it.
I would just root it. Once rooted, be sure to back up the stock OTA ROM that you're on just in case you need it later on. Back one up to the SD card and then make another backup onto the external SD card, if you have one, to be safe.
Flash another ROM and get rid of the issues.
Sent from my SCH-I535
Click to expand...
Click to collapse
Fixed that for ya.
twistedillutions,
1 GB of ram being used is kinda normal for TW. You still have another 1 GB to use so you're fine there. If you want more free ram, use an AOSP rom since they remove all the TW features and give a little more ram. In your case, you could take the VRBMF1 OTA which just came out and see how that works for you. You could always root/unlock that and flash anything like RBarnett09 said.
As he said, I recommend flashing an AOSP ROM without Touchwiz. I flashed LiquidSmooth 2.7 last night and this ROM is super stable. Battery life is great as well.
Sent from my SCH-I535 using xda app-developers app
thanx for the replies I jst got the new update so far no big bugs at first it was lagging flipping screens and keyboard takes 20secs to pop up for me to txt in browser txt app (go.sms.pro and stock) since I dnt use my fone during work since I cant notice my battery drainage I wil give it till nxt weekend till I decide to root ..one.last question is ther a major difference between aokp.and cm10.1? I also seen aynergy and liquid roms bt aokp and cm10.1 are the most popular
twistedillutions said:
thanx for the replies I jst got the new update so far no big bugs at first it was lagging flipping screens and keyboard takes 20secs to pop up for me to txt in browser txt app (go.sms.pro and stock) since I dnt use my fone during work since I cant notice my battery drainage I wil give it till nxt weekend till I decide to root ..one.last question is ther a major difference between aokp.and cm10.1? I also seen aynergy and liquid roms bt aokp and cm10.1 are the most popular
Click to expand...
Click to collapse
Not much of a difference.
I'm on LiquidSmooth v2.7 and I must say that I have yet to experience an issue and battery life is beyond amazing. I highly recommend it.
Sent from my SCH-I535 using xda app-developers app
twistedillutions said:
thanx for the replies I jst got the new update so far no big bugs at first it was lagging flipping screens and keyboard takes 20secs to pop up for me to txt in browser txt app (go.sms.pro and stock) since I dnt use my fone during work since I cant notice my battery drainage I wil give it till nxt weekend till I decide to root ..one.last question is ther a major difference between aokp.and cm10.1? I also seen aynergy and liquid roms bt aokp and cm10.1 are the most popular
Click to expand...
Click to collapse
The keyboard sucks and can get VERY laggy. Download SwiftKey and you will never look back! :good:
I will look.into more roms with liquid rom ill see what I decide on thanks
cus i can not post in the "development " so I'd like to feedback here and hope someone can feedback for me
1st, It's strange, if you set ur language to english the rom's system ui will be fine , but if you set it as chinese or others, it will be system ui FC
2nd, is it possible to add an option to show the carrier label in the status bar ? some one may keen on it ~
PAC-man ROM q&a thread:
http://forum.xda-developers.com/showthread.php?t=2261080
Brought to you by time and relative dimensions in space.
feedback
i tried the rom by ravikirancg. kudos for his efforts.
this is not much asked here(not allowed to ask!). but if there are really techy ppl who try new roms. which is the most stable rom for atrix 2 in jelly bean series preferably 4.3
deepakanto said:
i tried the rom by ravikirancg. kudos for his efforts.
this is not much asked here(not allowed to ask!). but if there are really techy ppl who try new roms. which is the most stable rom for atrix 2 in jelly bean series preferably 4.3
Click to expand...
Click to collapse
CyanogenMod will be, by far, the most stable.
Sent from my MB865 using Tapatalk 2
Ravikirancg said:
CyanogenMod will be, by far, the most stable.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
can you work on increasing the battery life of the 4.3 pac im running the new 1.0 kernel jbx but still the roms using up a lot of battery
underclocking and tweaking the governors seem to help a little but i think the kexec drawing a lot of power.
btw gr8 work on the rom integration of cm pa and aokp
saw ur github nice wrk.........:good:
---------- Post added at 05:32 PM ---------- Previous post was at 05:23 PM ----------
Ravikirancg said:
CyanogenMod will be, by far, the most stable.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
i second tht opinion but pa seems to have less battery consumption and with the gapps included into the rom it seems to be quite stable.
but if you want to tweak around with your cpu cm should do the trick.
Agree
Ravikirancg said:
CyanogenMod will be, by far, the most stable.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Me too. But i found that 4.3 pacman has less battery drain. The cm 4.3 is a real toaster. the devices heats up for no reason sometimes. Ravi bhai kabhi milo to sahi. Personally dhanyavad karna chahenge aapko currently on pacman 4.3 . Also curious what MIUI v6 might bring....!!
feedback!
hey, so I just noticed a few things, any fixes?
- the lock screen doesnt work (doesnt show up), even after setting up a pin or pattern, locking the phone via power button doesnt work, and its set to immediately lock as well. any idea?
- got the gapps for 4.3 installed..but it didnt come with a play store.. so i figure i install my own.. tried multiple versions just in case, even the latest for 4.3 and it just says no connection, I am connected to wifi and there is internet via firefox and gmail recieves emails as well, the stock browser just fc's but dont matter. any idea?
just need these two and its a perfect build for me, great workk!!
kk so running the 4.3 pacman by Ravikirancg on att atrix 2 with bmm on system 3..tried multiple reboots,tried clearing cache and dalvikca already to no avail.
thanks
dcutz said:
hey, so I just noticed a few things, any fixes?
- the lock screen doesnt work (doesnt show up), even after setting up a pin or pattern, locking the phone via power button doesnt work, and its set to immediately lock as well. any idea?
- got the gapps for 4.3 installed..but it didnt come with a play store.. so i figure i install my own.. tried multiple versions just in case, even the latest for 4.3 and it just says no connection, I am connected to wifi and there is internet via firefox and gmail recieves emails as well, the stock browser just fc's but dont matter. any idea?
just need these two and its a perfect build for me, great workk!!
kk so running the 4.3 pacman by Ravikirancg on att atrix 2 with bmm on system 3..tried multiple reboots,tried clearing cache and dalvikca already to no avail.
thanks
Click to expand...
Click to collapse
the ROM works perfectly for me. i install the ROM in system 1 is my daily use now and is amazing
rivas1981 said:
the ROM works perfectly for me. i install the ROM in system 1 is my daily use now and is amazing
Click to expand...
Click to collapse
Play store and all?? Hmm.. Maybe I need to do a bigger system folder, possible reason for the features being left out? Gonna try on system 4, nd See if that helps.
Sent from my MB865 using xda app-developers app
Giving a bigger system partition made everything work.. But now continuous system ui has stopped working :/ really??
dcutz said:
Play store and all?? Hmm.. Maybe I need to do a bigger system folder, possible reason for the features being left out? Gonna try on system 4, nd See if that helps.
Sent from my MB865 using xda app-developers app
Giving a bigger system partition made everything work.. But now continuous system ui has stopped working :/ really??
Click to expand...
Click to collapse
Maybe a bad download and/or a bad flash.(?) I haven't had any of the issues you're reporting, and haven't seen others reporting the same so it is likely something on your end. Just redownload and reflash and see if that helps.:thumbup:
Brought to you by time and relative dimensions in space.
awesome
1BadWolf said:
Maybe a bad download and/or a bad flash.(?) I haven't had any of the issues you're reporting, and haven't seen others reporting the same so it is likely something on your end. Just redownload and reflash and see if that helps.:thumbup:
Brought to you by time and relative dimensions in space.
Click to expand...
Click to collapse
kk got the latest nightly..works like a charm! perfect build now!
thanks
Lastess nigthly builds
Hi, the pac rom is very stable and fast, i use the nightly 23.
But, i have a bug to repport wen usb headset is connected, and recive or do a call if you don't hang before the other person hangs the phone is blocked and restart a little secs after.
Second with the lastes builds 26, 25 or 24 the wifi is not working. I test restarting, with wifical.sh, a fresh install (4.0.4 or 4.1.2) motorola roms flashed with rsd, i tried to install the 23 over 26 rom and wifi didin't start.
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
smokealbertobi said:
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
Click to expand...
Click to collapse
well dude cm11 is not yet that smooth .. u have to wait .. im also not using cm11, the most smoothest rom till now is CM10 (4.1.2 JB)
mrroks said:
well dude cm11 is not yet that smooth .. u have to wait .. im also not using cm11, the most smoothest rom till now is CM10 (4.1.2 JB)
Click to expand...
Click to collapse
So there's no date yet for the new CM for pico or i'll have to switch to 10 for a smooth phone?
smokealbertobi said:
So there's no date yet for the new CM for pico or i'll have to switch to 10 for a smooth phone?
Click to expand...
Click to collapse
yeah if u want a JB .. otherwise CM9 (4.0.4 ICS) is also very smooth ...
em still waiting for smooth CM11
mrroks said:
yeah if u want a JB .. otherwise CM9 (4.0.4 ICS) is also very smooth ...
em still waiting for smooth CM11
Click to expand...
Click to collapse
Also do you have any problems on your screen? Minse i think isn't calibrated any help?
smokealbertobi said:
Also do you have any problems on your screen? Minse i think isn't calibrated any help?
Click to expand...
Click to collapse
what do u mean by that ?
mrroks said:
what do u mean by that ?
Click to expand...
Click to collapse
well my screen is a little bit wanky when i try to tipe "b" it goes to "n" or "v" and i cant really type very well
smokealbertobi said:
well my screen is a little bit wanky when i try to tipe "b" it goes to "n" or "v" and i cant really type very well
Click to expand...
Click to collapse
well according to me its 90% problem with your touch screen so its hardware related issue ... but first try changing the rom if the problem persists then its hardware according to me Sorrie
smokealbertobi said:
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
Click to expand...
Click to collapse
No, its not the problem of CM11 because im already using since 1Month, its really butter smooth and im using IN2EXT script for internal memory
i think its your touch related problem any way first switch to another rom like [Truimph HD V2 Black Pegasus not V3] and CM10 4.1.2 or any HTC Sense 4.0 ICS Roms after that if same problem persists then contact htc service centre
smokealbertobi said:
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
Click to expand...
Click to collapse
@smokealbertobi
Flash This:
http://forum.xda-developers.com/gal...s/mod-pureperformancesx-zeno-edition-t2360985
Direct link:
http://www.mediafire.com/download/62ms8ok7afi8230/PurePerformances™X_CM.1.4.zip
If I help you,
Don't miss Thanks
You can try omni ROM 4.4.2 nightly.
Sent from my Explorer A310e using XDA Free mobile app
muraari4u said:
No, its not the problem of CM11 because im already using since 1Month, its really butter smooth and im using IN2EXT script for internal memory
i think its your touch related problem any way first switch to another rom like [Truimph HD V2 Black Pegasus not V3] and CM10 4.1.2 or any HTC Sense 4.0 ICS Roms after that if same problem persists then contact htc service centre
Click to expand...
Click to collapse
Yeah its not that....
Abhaysinh said:
@smokealbertobi
Flash This:
http://forum.xda-developers.com/gal...s/mod-pureperformancesx-zeno-edition-t2360985
Direct link:
http://www.mediafire.com/download/62ms8ok7afi8230/PurePerformances™X_CM.1.4.zip
If I help you,
Don't miss Thanks
Click to expand...
Click to collapse
Ok so i tried this thing and it goes a little faster and all
Did you installed it?
smokealbertobi said:
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
Click to expand...
Click to collapse
Hey bro try increasing ram so that your phone wont b laggy . Here : http://forum.xda-developers.com/showthread.php?t=2735281 :thumbup:
It worked for me . I hope it will hep u too .
Plz hit thanks button if this helps for u .
Sent from my Explorer A310e using XDA Premium 4 mobile app
Use cm11 weekly build #5. It's bloody smooth. Faster than cm9 or 10
sent from my htc explorer - cm11 weekly build #5
Try nand recovery and reinstall the ROM , I faced similar issues myself.