[Review] Noreve Perpétuelle Leather Case (Black) - Galaxy S 4 Accessories

Hi guys,
Got my hands on a Noreve case for the S4 a few days ago, and wanted to share my thoughts on it.
Noreve is a company from France, and they make very high quality leather cases for just about every device out there in the mobile arena. The cases are of the highest quality leather, and very well constructed. As with all Noreve cases I've seen and reviewed up until this time, the workmanship throughout is outstanding. I personally really love this company because they have a keen eye for detail.
After trying this case out for a few days, I can safely say that it's pretty much everything I could have expected from Noreve - great packaging, and a very high quality case. Here are a few shots of the box, which also comes in a red pouch. The case itself will be in this red pouch, meant to protect the case. I've always seen this as a very nice, thoughtful touch.
Once you're inside the box, you'll be greeted by the wonderful smell of excellent, high quality leather. While soft, it's also very durable, and the stitching is spot on all across the case. The case slides in without any hassles, but it's also not very easy to get out, which is a good thing. You don't really want the case to unintentionally come off.
The ports such as the power button and volume rocker can be easily accessed. And because they are recessed in due to the case, they will be protected from drops as well. Here's a few shots of the case from the sides.
Speaking of drops, the phone and case held up just fine to the 3-4 drops I put it through, on direct pavement. Three of them were from waist height, and one from neck height. Didn't seem to be a problem anywhere, and the case held on to the phone firmly all four times.
Another thing I like about Noreve is their metal grills for the speakers on the front and back of the case. It's the first time I'm seeing a front facing speaker grill from them, but it does look quite attractive. The front grill hasn't been implemented on any other models as far as I can tell - they for sure weren't there for the Galaxy Nexus, etc.
I really like how the phone feels very sturdy with the case on. I also have the Samsung smart cover and it drives me crazy, simply because the flap on it won't fully close. It just flaps about. With this, the phone is locked in tight and protected.
Overall, I'd have to say that this is another fantastic case from Noreve. While not one of the cheaper cases out there, you get what you pay for. And considering that it's a handmade, genuine leather case from France, I'd say it's well worth it, considering they provide free shipping with DHL as a bonus. I've tested quite a few of their products now, so I can easily vouch for the sheer quality they provide.
Anyone interested can check out the page for the S4 here. It's well worth checking out because Noreve offer a ton of customization for their cases. You can basically get them in any color/finish you can think of.
Also, anyone interested in purchasing the case, they can use this discount code - Yener2013. It will take off 15% of your order.
Cheers.

Thanks for the review. I have the noreve flip case for my old desire and it is lovely. One off the things I like was that the metal of the case was bent around to hold the phone.. all other cases I have seen use a plastic tray fixed too the cover.
Sent from my GT-I9505 using xda premium

sorry but..... u know wt i mean

I have no idea what you're talking about.

Related

Google Nexus One Pure Crystal Slip?

Anyone used this case? I REALLY don't want to put a case on my Nexus One, but it's also so slim and thin that I am going to drop it eventually.
Silly as it is, I don't want the whole phone covered up, so while the Innocase Surface II looks decent it also covers up the phone.. The Boxwave Pure Crystal Slip doesn't, but I can't find any reviews on it.
Anyone used one of these things? I don't use the dock, although I do use a horizontal belt case so I might have to get one that's slightly bigger as the N1 barely fits in the existing one, but I can deal with that.. That would happen for any case honestly, except for a skin.. I do like Best Skin Ever, but the last two I've bought seem to not be quite as "tacky" as the first few I had, therefore the grip wasn't quite as good. Maybe my imagination..
I bought the Boxwave case off amazon a month ago probably. its a nice case but save your money and buy a resin case from dcmugen on ebay, exact same thing with a different logo. its a nice case though, not too thick and easy to take on and off (I use both docks) so it fits my needs quite well.
Boxwave here. Nice thin and classy. Has rubber feel but not too soft either. It's a pretty good case makes phone look ten times better in my opinion. Is easily recommend it, but I don't use docks, so can't help there. Never the less, happy casing.
DC Mugen FTW. eBay - Epik Case. I got two cases for $8 including shipping and two screen protectors.
check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)
stiCk.E said:
check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)
Click to expand...
Click to collapse
Ah, I see.. I still think I prefer the Pure, no patterns on it, but otherwise the same.. Looks like Boxwave has the Cyclone (circle patterns), diamonds, a matte finish, some others..
Still haven't decided on which case.... I've always been disappointed in silicone cases, but I've almost always bought cheap $2 eBay ones..
I went with the Boxwave Pure Crystal Slip, we'll see when it arrives! God knows when, I had two shipping options.. 5-10 days ($2) or 1-3 days ($23!!)
So I'll see in 5-10 days
I got the Clear Pure Crystal Slip yesterday. Here's a quick review:
Overall, I like it and will likely use it when I'm out and about. It gives a much more secure grip on the phone without adding any weight or feeling larger. Although honestly I still think the Nexus One is a little TOO thin and a little slippery. This makes that better.
It feels like a cheap case, it's rubbery and smooth. If your hands are wet or oily it might be MORE slippery, don't know yet. In reality it seems pretty well made, and fits well. The Clear Pure version is crystal clear, no tint, no patterns, and you can clearly see the phone is a Nexus One.
I'm not doing any drop testing, but I think if the phone landed on a corner or an end this case could protect it. It's firm but pliable, not squishy like a silicone case and not a hard case. Primarily I think it'll protect it because it'll be LESS LIKELY to get dropped because the surface is a tackier and more surface area on the sides. I can pick up the phone with two fingers securely now, where before I'd have to tilt the phone up and get fingers under it to pick it up.
If anyone wants pictures I can do that, haven't yet...
Price summary: If it were $15 it'd be a deal. $20 seems too much.
Pros:
You can see see it's a Nexus. Google branding, colors, body build
It's thin, firm, and fits tightly
Covers up the power and volume buttons, but made to fit over them. Maybe a little rain resistance?
Adds better grip, more confidence holding the phone
Does not interfere with any ports (except a little on the power plug, see below)
Does not interfere with any openings (speaker, mics, camera, camera flash)
Does not interfere with the screen, particularly near the edges
Does not obscure the speaker when phone is on its back
Lets you lay the phone down face-down without resting on the trackball
Covers all corners, edges, entire back.
Cons:
It has a molding line all around it.. It's not that visible but you can feel it. Sides aren't smooth
Covers up the power and volume buttons, but made to fit over them. Makes it too easy to hit the buttons, and you can't feel the button very well (to feel it when touching) nor feel the action of the button itself.
Seems to make the stock charger plug (maybe others too) not feel "in", I think there's too much material around the plug
Takes away the nice texture and feel of the Nexus One
Thumb hits the case a little scrolling down on the trackball, but it doesn't make it harder to use
Other notes:
Does not protect the camera lens or the screen at all
Mine was clearly used, fingerprints all over and in the box backwards :/
A slim belt case intended for the N1 is too small to fit with this case
There is a weird cutout to the left of the HTC logo in the case, like maybe a hand strap could go there?
akifbayram said:
That case does look nice but 20 dollars seems a bit excessive. Look at other Amazon items. I found one for 5 dollars shipped that is pretty similar and doesn't have the hole in the back. http://www.amazon.com/Google-Crysta...X1DSC0SAJ94E&s=generic&qid=1275242975&sr=1-27
Click to expand...
Click to collapse
I have that case as well as the Crystal Boxwave slip.
The Boxwave one:
- Is clearer obviously (not the "smoked look").
- Fits a good deal tighter.
- Has a full cover for the lip, not the chin strap method of attaching.
- Has Boxwave written across the back.
I actually prefer the patterned one because it's more interesting, both detract from the Nexus, so it might as well add some flavor, right? The Boxwave one is far tighter fitting (and slightly thinner) but neither is going to come off in any kind of normal use. I also own the desktop dock, so I need to take it off on occasion to allow the phone to fit. Both cover all the buttons, so you have to get used to pressing them through the rubber. They also both have that edge around the edge of the case from being molded.
Anywho, just my $0.02
akifbayram said:
Speaking of 2 cents...there are a lot of auctions for the patterned Nexus One cases for 99 cents. http://stores.ebay.com/Cimo-Cases_G...15QQ_sidZ192097565QQ_trksidZp4634Q2ec0Q2em322 I wish I knew about this before
Click to expand...
Click to collapse
And those are probably worth at least $1.10...... Sometimes you really have to make a minimal investment to get something useful.

[Review] Cruzerlite

First off I would like to thank Raul from Cruzerlite.com who found my style of reviewing interesting enough to inquire about me reviewing their cases. It is a great opportunity and I would just like to send a personal thank you to him and the company. I would also like to point out that my review is still going to be 100% honest, in fact I waited 4 days after I received the cases to do a complete review, including a day in each case I received.
The three cases I received were as follows
Clear Android Army
Blue Android Circuit
Green Androidified A2
I'll review them all at the same time, and anytime there is something special about a certain one, I'll mention it. First are Pro's,then Con's, and a summary at the end. Fairly simple.
Pro's:
-Like any premium case the cutouts are perfect at every port, button, and IR blaster on the phone.
-The TPU is pretty good quality, I've felt better in one other case, Diztronic, but Cruzerlite is a very close second.
-Double cutout of the camera and flash giving better protection overall on the back
-designs actually show up (on white S4 at least, cannot verify on black because I don't one) and looks very nice. I have recieved compliments on how cool they looked, the color enhances the device instead of detracting from it, and I see a lot of cases that detracts from the quality of the phone! (cheap and expensive cases alike)
-The raised lip around the front of the screen kind of folds over the bevel. I'm not sure how to explain it, but the lip extends over the full front of the bevel instead of resting on top of it like every other case I own does.
-Logo is not distracting from the overall design!
Con's
-On the Androidified case it just feels a lot thinner, I'm not sure if it was the unit I was sent, but the TPU feels thin all around, especially on the lip and sides.
On good reviews I usually put here that the cases were not free, but in this case they were...and I'm not sure how to make it sound like I wasn't completely satisfied, but had I spent money on them, I wouldn't put anything here, so this is a placeholder for my own sanity...
one thing to note about clear cases though, they discolor over time, I am not sure if these will, but it is something to think about. i honestly love clear cases over all other cases. but UV damage is not something plastic is known to combat well over time. lol
Overall:
If I could, I would return 3/4 of the cases I've purchased over the past month for the S4 because these are honestly the ones I'll be using for a good length of time. I cannot foresee me looking for another TPU case after trying these, and I would recommend them for anyone who is on the fence. If you want to purchase one TPU case, you'll want to go with one from either from Cruzerlite or Diztronic. Both are great companies and offer different types of cases depending on what you really are looking for.
As always, let me know if you would like a specific picture or more in-depth look at something in particular. The photos will be up tomorrow when the lighting is better.
Rhamza161 said:
First off I would like to thank Raul from Cruzerlite.com who found my style of reviewing interesting enough to inquire about me reviewing their cases. It is a great opportunity and I would just like to send a personal thank you to him and the company. I would also like to point out that my review is still going to be 100% honest, in fact I waited 4 days after I received the cases to do a complete review, including a day in each case I received.
The three cases I received were as follows
Clear Android Army
Blue Android Circuit
Green Androidified A2
I'll review them all at the same time, and anytime there is something special about a certain one, I'll mention it. First are Pro's,then Con's, and a summary at the end. Fairly simple.
Pro's:
-Like any premium case the cutouts are perfect at every port, button, and IR blaster on the phone.
-The TPU is pretty good quality, I've felt better in one other case, Diztronic, but Cruzerlite is a very close second.
-Double cutout of the camera and flash giving better protection overall on the back
-designs actually show up (on white S4 at least, cannot verify on black because I don't one) and looks very nice. I have recieved compliments on how cool they looked, the color enhances the device instead of detracting from it, and I see a lot of cases that detracts from the quality of the phone! (cheap and expensive cases alike)
-The raised lip around the front of the screen kind of folds over the bevel. I'm not sure how to explain it, but the lip extends over the full front of the bevel instead of resting on top of it like every other case I own does.
-Logo is not distracting from the overall design!
Con's
-On the Androidified case it just feels a lot thinner, I'm not sure if it was the unit I was sent, but the TPU feels thin all around, especially on the lip and sides.
On good reviews I usually put here that the cases were not free, but in this case they were...and I'm not sure how to make it sound like I wasn't completely satisfied, but had I spent money on them, I wouldn't put anything here, so this is a placeholder for my own sanity...
one thing to note about clear cases though, they discolor over time, I am not sure if these will, but it is something to think about. i honestly love clear cases over all other cases. but UV damage is not something plastic is known to combat well over time. lol
Overall:
If I could, I would return 3/4 of the cases I've purchased over the past month for the S4 because these are honestly the ones I'll be using for a good length of time. I cannot foresee me looking for another TPU case after trying these, and I would recommend them for anyone who is on the fence. If you want to purchase one TPU case, you'll want to go with one from either from Cruzerlite or Diztronic. Both are great companies and offer different types of cases depending on what you really are looking for.
As always, let me know if you would like a specific picture or more in-depth look at something in particular. The photos will be up tomorrow when the lighting is better.
Click to expand...
Click to collapse
do you have pictures ?
No pics?!
Sent from my Galaxy S4.
4 paragraph review with no pics lol
You can always refer to my review pictures http://forum.xda-developers.com/showthread.php?t=2274876
Sorry, tomorrow is my first real day off in over a month. I have been working over 45 hours a week at my day job and then volunteering on my days off, I literally have not had any free time! But tomorrow I'll update all my posts with nice quality pictures, I promise!
He are some pictures outside of the phone, my full camera is having problems right now so they were laden from my phone.
Sent from my galaxy S4 using xda premium HD!

Revolution case by Poetic Review

Poetic offered me to review their case, and they sent me one completely free. I want to thank them first for this kind offer.
To begin with design;
Quality of material is really good.
It looks great :good:. Compared to the other armor cases i saw, Revolution has a cool and better looking design for sure. It does not make your phone like old army satellite phones like others.
Cuts are precisely aligned. It has cuts for both mics on top and bottom.
The stand on the back offers great functionality , also adds a good-looking detail to back side.
It offers a better grip on the phone.
Field of profession: Protection
Nothing much to say really. For sure one of the best. Case feels really solid.
Also has dust protection caps on usb and headphone ports. It really gives you confidence about drop protection. I feel like a dont need do worry about dust or dropping my phone anymore.
Cons:
As a natural downside of this high protection, phone feels a little bit bigger and thicker.
I think it is hard to put the phone to the case and back off(Maybe there is an easier way than I did). But if you need this kind of protection I guess you dont need to do it often.
To conclude:
It is one of the best cases offering that much protection also with an elegant design. Feels solid and durable, no worries about dropping. If you need that much protection, I would definately recommend that.
As a results I give this product 9/10.
Link of the product: http://www.amazon.com/Revolution-Protective-Landscape-Absorption-Resistant/dp/B013A1JEI4/ref=sr_1_1?srs=10167778011&ie=UTF8&qid=1449783452&sr=8-1&keywords=s6+edge+plus+revolution
Very nice and interesting! Good work!
DBase2 said:
Very nice and interesting! Good work!
Click to expand...
Click to collapse
Glad you liked it
I'm pretty sure this is the ugliest design possible. Wouldn't put it on my phone if they paid me.
It seems too big to be good for daily use
Sent from my HTC D820us using Tapatalk
Protection vs Convenience!
I got one too for the review! Here's my list of pros & cons:-
Pros:-
- Protection
When they say protective case, I didn't realize they literally meant every letter of it! This shell is so damn hard, I can beat the **** out of a mugger if it ever comes to that. I'm pretty sure even if I drop the phone on the ground from the first floor, nothing will happen to the phone unless the screen hits directly on some elevated object. So I'll give it a thumbs up on protection category. The case is damn solid! The brand also claims that the case is shock resistant, although I didn't get a chance to test it out myself (or may be I don't want to find that out). The case also covers the volume rocker and the power button with its own tactile buttons.
- Dust Resistant
Putting the case on is quite a challenge, however once done, it doesn't leave much space in-between the case and the phone itself. The USB Port and the 3.5mm Audio Jack has a dedicated pull-up flaps which are easy to open and close. So, overall, it has some dust protection too.
- Excellent Grip
The case is built with some reinforced TPU (or similar material) with texture on the sides which provides excellent gripping to the holding hand. Even if you drop it, doesn't look like it's gonna make any difference anyway!
- Built-in Kickstand
Not just the case, even the built in kickstand is made of metal and it definitely feels solid unlike some lousy kickstands which come with many other cheap cases. So you have the power kick it out and enjoy movies/videos (or games if you use a gamepad) anywhere you want.
Cons:-
- Size
Huge! That's what it is. Edge+ is already hard for some to handle it with one hand but putting this cover on, it becomes almost impossible for them to operate with one hand. It widens the phone by atleast 1.5-2 cms.
- Weight
With power comes responsibility. Similarly, with protection comes additional bulkiness! At 90 grams (3.2 ounce) this is the heaviest case I've ever used. At 153 grams ( 5.4 ounce), Samsung Galaxy S6 Edge+ is one of the slimmest and lightest phablets in the market and this case would put that to complete shame!
- Case On/Off
With my Gear VR, I need to take off my phone's case every now and then! With this case, that's not happening. It took me almost 15 minutes (first time and the only time) to put this case on. Trust me, it's damn hard to pull out the frame ( the plastic bumper) from inside the case and putting the phone inside is even harder! Though once done, it's definitely protected! Now, taking off the case is another challenge!
- Buttons
Due to this reinforced TPU material, the buttons on the case are a bit harder than usual. So you might have to use some extra strength when you want to access the power button or volume key, you still get the tactile feedback though!
The Final Verdict
If you work in a harsh environment and your sole purpose of a case is protection of the phone, this case is definitely for you. But if you hands are short or you like keeping your phone in your jeans pocket or you want to show off how cool is that edge display of your phone, this case isn't for you! Check out the HD images for a better view!
First I would like to thank Poetic for sending me a free sample to do a review of it.
I received Poetic Revolution case one week ago and I decided to test it for a while before I write a review.
At the first sight I was astonished by a quality of a case, I have never seen case with more details before. I really like its millitary look. I love how all holes are precisely cut out. They are covered with a dust protectors which is really nice. When you hold your phone in this case you are completely sure iz will not slip out of your hands.
I found metal stand really useful especially when I watch movies, have video conversation with my girlfriend or when I cook lunch and cannot hold my phone.
When It comes to protection I am sure it will prevent my phone of taking damage. My son dropped phone on the floor two times and phone survived just very well without cracking.
Cons:
- It is a little bit too bulky (but it is ok as protection is its main role)
- There should be screen protector intergrated in this case
- Every time I insert charger I am afraid to scratch bottom of my phone.
Overall I am keen on this case because it gives best protection to my phone. I love how nice it looks on my phone.
If you want highest level of protection for you smartphone you shoud definitely give it a try:
http://www.amazon.com/Revolution-Protective-Landscape-Absorption-Resistant/dp/B013A1JEI4
I received the Poetic Revolution case as well about a week ago. I wanted to give it a weeks worth of use before giving a review.
Pros
(1) Very well built. This thing is rock solid and the tolerances are super tight. This keeps out the dust and offers great protection from falls.
(2) Great Design... The overall aesthetics of this case are great. You can tell a lot of detail went into designing this case. It's funny to mention but I found the integrated backplate (blue plate) on the inside of the case to be impressive how it's molded into the rest of the case.
(3) It's awesome that they included a kickstand. I miss the days of old when phones had kickstands built into them, but this is a great alternative option since the newer phones don't have the kickstands anymore.
As far as CONS go.... there really aren't any that I could find. I did have a couple annoyances that I'll list below but these are subjective of my own opinion and shouldn't be viewed as a flaw in the design or a need to change it in any way, just a couple suggestions that would make "myself" like the case even more...
(1) Not a fan of the caribeaner loop... I get why it's there, and could be useful to some, but I feel like I'd just want to get some snips and cut it off... I wear baggy pants and can still fit this big case/phone in my pocket, however that caribeaner loop would catch on my jeans and just constantly annoy me. A minor hindrance, but I'd prefer it without the loop.
(2) I noticed the kickstand would "tap" against the backside of the case. This would be a little annoying were there any vibrations going on. For instance when my phone is in my car dock stand, the vibrations from the car/road would make this rattle ever so slightly. My suggestion, integrate some sort of rubber/silicon surface just under where the kickstand meets the backside of the case.
Final thoughts....
This is a great case that would definitely protect your phone had you dropped it, or are in a harsh environment. The design is eye-catching and worthy of the newer era of smartphone cases. The kickstand feature is a definite plus, and even though I am not a fan of it, I could see how the caribeaner loop would be useful for the outdoorsman or a construction worker.
I received my Revolution case from Poetic over the holidays (thank you guys).
The first thing that I noticed was the build quality!! It's amazing guys. You won't be banging up your phone with this case protecting it!!
All of the cut outs are very precise. The case has dust flaps to cover the charger and ear phones sockets. The case is a two part case that you take the rubber inner out and after fitting the phone into it then you put the outer tougher part on. It does add a little size to the phone but it's going to protect it from and mishaps. After all...protecting a phone that costs more than most gadgets out there is the main thing. I have used it now for a couple of weeks and I must say that when you buy a Poetic Case you're buying the best.
I am a proud owner of two different cases from Poetic and I promise you that one you try you will always buy from them.
I only found one slight hindrance and that's the kickstand. After a day or two it seems have become a little loose and taps and rattles. I just placed a tiny piece of blue tac under it to keep it closed.
Please try these cases from Poetic guys...I really speak highly enough!!!
Sent from my SM-G928F using Tapatalk
I have been using the Poetic Revolution case on my gold Galaxy S6 Edge+ for about a week and a half
now. Here are my thoughts.
When looking for a rugged case, the Poetic Revolution marks off every box, and then some. This is one
of the best, and toughest cases I have ever seen. When not at work, I need a case like this for my phone.
Hiking, camping, car shows, at the lake, my kids and I are always outside. I have 2 young sons, with this
case on, I am not concerned if they grab my phone and throw it around. I have an 85 pound puppy that likes to chew. Thankfully he has never gotten a hold of my phone, but I feel confident this case would protect it.
When receiving this case, I thought it was going to be all black, but it was not. It is black with very dark
brown accents. I personally liked this as it makes the case stand out more, but in a subtle way. I also
think it makes the case look really good with my gold phone. I also really like having the port covers.
While out on the sand rails and quads out in the desert, they keep the dirt out. When you are at home
with your phone on the counter, they can keep them covered long enough for you to save your phone
should something get spilled.
I have seen where some people have said that this case is very difficult to take on and off, however, I
do not feel that way. Is it more difficult than just a thin snap on case? Of course, but I have no concern
that this case is coming off my phone if it gets dropped. I have used cases that go on and off in the same
way in the past, and I prefer them. The way it’s made, it is thinner than an Otterbox type case, but in my
opinion stronger because you don’t have 2 plastic pieces snapping together.
The kickstand on this case is also among the best I've seen. In my experience, most kick stands are
made from a cheap material, or even if they aren’t, they pop out of the case so easily the little nubs that
are used to snap it into place break. Not here, where it is very tactile in extending it to use it, but it will not pop out of the case on you. One other benefit is that I have been able use it both horizontally and vertically.
When it comes to the loop at the top, I could go either way. I would be happy with a case that did not have it, but I think it could also be more useful with some minor improvements. If I am just hiking, I feel confident when hooking it to my backpack. However, when out riding in the desert, I do not feel that it is strong enough to hook on to my keys or someplace similar. If it kept the loop, I would use it more if it were reinforced with a harder material. Either way, I think this was a good idea to separate their case from others.
Though I was pretty sure they would not work, I did test both wireless charging and Android Pay (NFC) with this case on, and neither worked. This was not a big deal for me as I do not use Android Pay much, and I only wirelessly charge at work, where I can just take the phone out of the case if need be.
This case was provided to me by Poetic for my honest opinions. For the price of this case (currently $19.95 on Amazon), it is superior to cases costing twice as much. Though this is my first Poetic case, it will not be my last. I was so impressed with this case that I recently purchased a Poetic case for my Galaxy Tab A after the old case was chewed by above mentioned puppy.
Looking great will definitely try it soon.
Sent from my SM-G928G using Tapatalk

Review: MoKo [Heavy Duty] case for Nexus 6P Huawei

Hi guys,
I finally got around to doing a review on the Moko Heavy Duty Case for my 6P. I ordered this on amazon.ca. I've rocked this case for about a week now since I did that video, and I am pleasantly surprised.
The cutouts are precise, and the case does not look or feel cheap. The fingerprint scanner is easy to use still as well. The plastic is pretty soft, and I don't think it would stay on on its own without the black shell, but it does fit perfectly. Also, didn't notice much pocket lint or anything else sticking to it like some have reported. Overall it's a great option for a more rugged case for the Nexus 6P, especially here in Canada, where the options can be sparse. Here's the link from amazon.
Nexus 6P Case - MoKo [Heavy Duty] Full Body Rugged Holster Cover with Swivel Belt Clip - Dual Layer Shock Resistant for Huawei Google Nexus 6P 5.7 Inch Smartphone 2015, PURPLE https://www.amazon.ca/dp/B00JP6J1A0/ref=cm_sw_r_other_awd_HnYMwbXKYG11S
11 bucks plus tax, and since I have PRIME, also got free 2 day shipping. Yes, I have a compulsive online shopping problem...
I will also post reviews for my Spigen Rugged Armour and a Poetic Revolution cases shortly.
https://youtu.be/k2k6gPdRPUY
Sent from my Nexus 6P using Tapatalk
I've got one in blue but I don't use it anymore. It's a pretty nice case and the quality is fantastic I just wish they would stop putting those huge bumps on the back for no reason. They serve absolutely no purpose and double the thickness of the phone. They do this on these cases for all phones and just still makes no sense.
RED ZMAN said:
[...] I just wish they would stop putting those huge bumps on the back for no reason. [...]
Click to expand...
Click to collapse
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
daniels220 said:
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
Click to expand...
Click to collapse
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
RED ZMAN said:
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
Click to expand...
Click to collapse
I have the black version. Based on the pictures on Amazon the colors looked like they'd be pretty in-your-face, especially since the highlight color is visible directly around the edges of the screen. I'm afraid I don't have any holsters—I've never used one.
I realize, I forgot to mention the most important thing! The headphone and USB-C cutouts on this case, as shipped, are not large enough for most cables. The stock USB-C cable fits but scuffs the sides, many high-quality third-party cables won't, and the only headphone plugs that will fit are the super-tiny ones that some headphones have for exactly this reason. But! If you have a decent utility knife, some courage, and a steady hand, it's possible to enlarge the cutouts without messing up the case. (I cut away a tiny bit of the TPU near the jacks as well, since it was being deformed when plugging in a cable.) With this done it works beautifully—the case is even thin enough to use a Square credit-card reader in the headphone jack.

A case that does it all?

Hello Everyone,
New Note 4 user here, (yeah sounds strange upgrading from the note 3 finally, but samsungs gone full potato) and like any other purchase, the hunt for cases is on. I have scoured the internet/ebay/threads for possible solutions to my dilemma and haven't found anything, so I figure its a good time to ask. With my N3 I had the Seidio Dilex Extended battery case with the belt clip holster. This was an amazing combo and accounted for 99% of my needs, minus the stupid negative incline when the phone was flat on its back, due to the kickstand bulge.
Anyways, I am having a hell of a hard time finding extended battery cases that have a kickstand, or have the plastic belt clip holsters for that matter. Essentially it looks like its the Zerolemon and thats it for holster combos, or if I want an integrated kickstand, its the mugen, for outrageous pricing.
I had originally hoped that I'd be able to reuse the same case and such from my n3 with some modifications, since these two phones are very close in size. Well that got quickly abandoned, but there was still the possibility of using the seidio case and cover/holster since they appeared to be the same dimensions. Wrong again.
The sides of the case have much steeper angle coming out from the phone on the bottom and top, but could possibly be adjusted depending on how or if I can rework the holster.
and the top
I have found a temporary starting point to try and reclaim some of the utility I had with my N3 with a few random pieces from amazon.
Anker has been out of stock for a while, unless you want to pay scalper prices on ebay, so I figured I'd give Kranich a whirl for the $25 they asked for 6400mah battery and the plastic textured back panel.
Next I picked up a generic tpu honeycomb case (hopefully this is better than the plastic crap I had on my SIII) for $10 https://www.amazon.com/gp/product/B00S1581X4/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
and lastly found a neat little gadget for another $10, a magnetic kickstand with adhesive. https://www.amazon.com/gp/product/B01HP15P60/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
My plan should it go well, is to try and either cut a loop in the tpu case and secure the kickstand to the plastic backing itself, or to the tpu on the outside if thats not possible. Either way, ill make sure to correct the confusing mistake seidio made by putting the kickstand on the bottom of the phone and having it lay with the bottom of the phone slightly elevated instead of flat.
This should get me back to at least the core level of performance that the seidio case I had before offered, with a little less protection I think.
The last problem however, is the belt holster (or whatever you want to call it). Again, not many options, so I am looking at modifying my existing seidio holster to fit my N4 or possibly getting an otterbox holster and trying to work with that. You know, interestingly enough, I figured Alibaba would be swarming with weird stuff like that, and I really didn't see anything different
If anyone has any bright ideas, I'd love to hear it. Or for that matter any other cool suggestions for gear.
==============================Update #1==========================================
TPU case came in, god this stuff still sucks, and spigen kcikstand as well. After slipping my note 4 into something more sensual, I decided it was time to try out the holster, which I prayed to the case gods would still fit, and i-it d-d-does! Success! It does in deed definitely fit securely in the mount, albeit a it rides a little higher in the clip due to being ever so slightly longer that the note 3 with the seidio case (works for me still).
Far Away shot.
Damnit, point and shoots are picky when shoplights are involved.
Now that the first test was an overwhelming success, I decided it was time to make some cuts and drop the kickstand in, maybe risk some fingers or violate some safety rules. I decided to cut my way through the TPU case (while half listening to a linus tech tips webisode) and attach the kickstand directly to the phone case for more stability and a slightly smoother surface and a little more professional look. Results below:
First was to figure out where to put the case, I noticed that the first set of honeycombs was almost a perfect border for the ends of the kickstand and those served as an excellent guide for my first cuts.
To achieve a straight cut, i used a square razor blade and tapped it down through the tpu into an old notepad. this have a nice clean straight edge, id soon have to murder since it was nowhere near wide enough for accommodate the whole kickstand. A halfway picture would have been nice, but I was eager to finish.
If you do decide to copy this, make sure you cut the material, almost too tight for the kickstand, so it fits snugly, instead of stretching and leaving a gap like mine did. I would have liked to have rounded my edges a little better, but oh well, its not like I bought the phone to look at the back.
In any case(oh god not the puns), I think it worked out pretty well, but I think I'm gonna try and find a few more TPU cases, maybe that are a little spongier since this hardly gives any protection for drops. An added benefit is the lip of the kickstand in this spot serves as a nice rest for your fingers while using the phone.
I own and use the Thor Champagne Gold version of this one for more than 18 months now: https://www.amazon.com/Galaxy-Note-Verus-Charcoal-Black/dp/B00MHBSHYG
and am very happy with it. Have dropped the Note4 while bicycling, and from other stupid high positions on stone, it has saved my Note4 many a time. These verus cases rock!
So try that brand, I bet you they have what you need.
Switched from Hyperion 8000mah with honeycomb tpu, now using Verus Iron Shield with Spigen kickstand add on and purchased 3 extra batteries with external charger for $23 US from Amazon. I have leather holster, but front pocket works just fine.
jult said:
I own and use the Thor Champagne Gold version of this one for more than 18 months now: https://www.amazon.com/Galaxy-Note-Verus-Charcoal-Black/dp/B00MHBSHYG
and am very happy with it. Have dropped the Note4 while bicycling, and from other stupid high positions on stone, it has saved my Note4 many a time. These verus cases rock!
So try that brand, I bet you they have what you need.
Click to expand...
Click to collapse
That looks and sounds amazing, and reminds me of some of the drops my note 3 has taken and survived. This is what I really, really wanted to reproduce with my note 4, because, well it makes sense. Only problem is, I really want an extended battery since charging is much slower than my n3, and I don't want to rely on batteries.
tbvnz said:
Switched from Hyperion 8000mah with honeycomb tpu, now using Verus Iron Shield with Spigen kickstand add on and purchased 3 extra batteries with external charger for $23 US from Amazon. I have leather holster, but front pocket works just fine.
Click to expand...
Click to collapse
It looks goregeous, but I'm a little concerned about dampening shock, TPU doesn't seem to be the best at it..

Categories

Resources