Hi, i have a Tianji H580 a chinese mobile with a bad technical support . I tried to flash with spflash, but the usb driver for mtk6575 that i found in other thread not works in Windows 8. I forced windows to install driver with not digital signature, but is not the solution.
Anybody have a idea to solve it?¿
thx you.
sorry, i'm looking for original ROM for this device. Do you have one? another question: is your GPS working properly? thank you
Related
I was given an ethernet/usb dongle a few days ago and i haven't been able to find the drivers for linux. So now i'm in doubt.... Are there any drivers out there so that i can use my jp1082-030818 on my motorola xoom?
Drivers found!!!
Guys, after a long search, i finally managed to communicate with the chinese company that sells these dongles on ebay and they sent me a link for the drivers. I'm attaching the drivers here for all of you who need them like i did.
PS- i'm attaching ALL drivers for the dongle, not only the android ones, so you guys can have them too, if you need them.
The Poetic Vampire said:
Guys, after a long search, i finally managed to communicate with the chinese company that sells these dongles on ebay and they sent me a link for the drivers. I'm attaching the drivers here for all of you who need them like i did.
PS- i'm attaching ALL drivers for the dongle, not only the android ones, so you guys can have them too, if you need them.
Click to expand...
Click to collapse
Can you help me find the driver for windows (XP and 7) ? Thank you in advance!
Very thanks .
How do I install these drivers
I do have an Asus tf101 and usb dongle jp1082, but I don't know how to install these drivers.
Colud you help me please. I'm a newbie in android.
Herrpeter said:
I do have an Asus tf101 and usb dongle jp1082, but I don't know how to install these drivers.
Colud you help me please. I'm a newbie in android.
Click to expand...
Click to collapse
Yes, please. Me too, I have the TF101 and the same LAN adapter but it seems not working! Thanks in advance .......
I was given an ethernet/usb dongle a few days ago and i haven't been able to find the drivers for win 7 /64bit. jp108 NO-030818
plz hellp me
[email protected]
The Poetic Vampire said:
Guys, after a long search, i finally managed to communicate with the chinese company that sells these dongles on ebay and they sent me a link for the drivers. I'm attaching the drivers here for all of you who need them like i did.
PS- i'm attaching ALL drivers for the dongle, not only the android ones, so you guys can have them too, if you need them.
Click to expand...
Click to collapse
Can you post a tutorial on how you installed the android drivers? I tried to open the file "README" in the android directory and it's just gibberish.
The Poetic Vampire said:
Guys, after a long search, i finally managed to communicate with the chinese company that sells these dongles on ebay and they sent me a link for the drivers. I'm attaching the drivers here for all of you who need them like i did.
PS- i'm attaching ALL drivers for the dongle, not only the android ones, so you guys can have them too, if you need them.
Click to expand...
Click to collapse
Thanks! The one I ordered is arriving any day now!
Tutorial for Android
vatvedt said:
Thanks! The one I ordered is arriving any day now!
Click to expand...
Click to collapse
Yes, but could you kindly post a tutorial on how you installed the android drivers?
thanks and merry xmas to all!
guys, buy a better dongle. I tried to port those drivers over a year ago. Those drivers are ancient and not compatible with the .39 linux kernel.
I am using a dongle from o2 in the UK. its called the e173 from huawei and it only cost £10 and could be unlocked for free. Can someone tell me how I can use that on the xoom through a otg cable?
Thanks
Sent from my GT-I9300 using xda app-developers app
[email protected] said:
Yes, but could you kindly post a tutorial on how you installed the android drivers?
thanks and merry xmas to all!
Click to expand...
Click to collapse
Didn't have to install any drivers. I tested it on a iMito MX1 running 4.1.x, and it runs out of the box. For some reason I only got low speeds (5-6mbit). Don't know why that is though.
hi
i'm looking for this driver, my android does not detect the jp1802. I see that the proposed driver here is not compiled and i don't know how to do. Is there a tuto?
there is somewhat a tuto in readme.txt, however part is written in chinese:
编译qf9700_android驱动
5.1 转到驱动代码目录下 ： cd qf9700_android/
5.2 依据实际情况将驱动中的Makefile修改有关参数
KERNEL_DIR := 此项需要依据实际情况修改为kernel源代码的位置，比如: /root/linux-2.6.28-test/
KERNEL_VERSION := 此项需要依据实际情况修改为kernel源代码的版本，比如： 2.6.28-15等，
也就是make menuconfig左上看到的版本名称
5.3 编译驱动
make
there are also some .cmd files
someone to read between lines?
I have the tablet smart pipo s1 and I don't find anything about its usb driver, I don't know if there's a generic driver for those tablet with strange brand or something any help will be helpful.
thanks in advance.
blashadow said:
I have the tablet smart pipo s1 and I don't find anything about its usb driver, I don't know if there's a generic driver for those tablet with strange brand or something any help will be helpful.
thanks in advance.
Click to expand...
Click to collapse
I'm in the same boat. Just got mine the other day.
I finally figured out why adb can't enumerate the tablet -- there's no USB driver! Obviously, there must be somewhere, but where?
webitube said:
I'm in the same boat. Just got mine the other day.
I finally figured out why adb can't enumerate the tablet -- there's no USB driver! Obviously, there must be somewhere, but where?
Click to expand...
Click to collapse
FOLLOWUP: I think I found the product page from the original manufacturer: It's full name is PiPO P733 (S1) and is on pipo.com.cn. (I can't post a link because I don't have enough posts on xda).
I sent a quick email to them asking for a Windows 7 device driver for this tablet. I'll reply back to this thread when I hear back.
~Ron
webitube said:
FOLLOWUP: I think I found the product page from the original manufacturer: It's full name is PiPO P733 (S1) and is on pipo.com.cn. (I can't post a link because I don't have enough posts on xda).
I sent a quick email to them asking for a Windows 7 device driver for this tablet. I'll reply back to this thread when I hear back.
~Ron
Click to expand...
Click to collapse
Hi,
any update about this USB driver?
I can't find it
Thank you so much!
S.
salllyna said:
Hi,
any update about this USB driver?
I can't find it
Thank you so much!
S.
Click to expand...
Click to collapse
I attached the usb driver that I received from my vendor, LightInTheBox.com. Unfortunately, it didn't work for me. Maybe you'll have better luck.
After that, PiPO sent me to instructions to flash the ROM: (URL Removed because I don't have enough posts. If you need this, PM me, and I'll send it to you.)
On the PiPO page, you'll find links to the RKBATCHTOOL which handles the update and a link to the page for the firmware.
Please note, that the updated firmware didn't fix my issue either. It did, however, allow me to use the Chrome browser. (Chrome crashed with the original firmware.)
~Ron
P.S.: salllyna: I'll send the URL to you via PM.
webitube said:
I attached the usb driver that I received from my vendor, LightInTheBox.com. Unfortunately, it didn't work for me. Maybe you'll have better luck.
After that, PiPO sent me to instructions to flash the ROM: (URL Removed because I don't have enough posts. If you need this, PM me, and I'll send it to you.)
On the PiPO page, you'll find links to the RKBATCHTOOL which handles the update and a link to the page for the firmware.
Please note, that the updated firmware didn't fix my issue either. It did, however, allow me to use the Chrome browser. (Chrome crashed with the original firmware.)
~Ron
P.S.: salllyna: I'll send the URL to you via PM.
Click to expand...
Click to collapse
did not work for mee too
my pipo S1 table auto installed a driver when i plugged it on my pc/laptop so i was wondering it might be ur OSversion or other stuffs
Pipo smart S1 driver
You can download a program called moborbo, install it in your PC, Connect your Pipo tablet through the USB to your PC and then open the program and it will install the driver automatically. You can watch the tutorial video for this in youtube just open youtube and write on search Pipo Smart S1 RK3066 ROOT. Sorry, i can't put the url as am a new member. Hope it helps you
Just picked up a S1 last week and was looking around for rooting instruction for it. I ran into this website http://www.topnotchtablets.com/RK3066firmware which has the batch tool, some instructions and custom firmware. Haven't tried it yet, but I thought I would share. Should note that the custom firmware is supposed to have a fix for gameloft games!
Just picked up one of these this week but there doesn't seem much info on xda so i thought id share this -
http://chinagadgetsreviews.blogspot.ro/2013/03/pipo-smart-s1-firmwares-gathered-on-one.html
Now it is a solved matter, also check here:
http://chinagadgetsreviews.blogspot.ro/2013/01/how-to-install-rockusb-driver-v20-on.html
I have currently gotten a ZTE Geek v975 with Intel atom z2580 and I would like to know if it is possible to install Windows 8 on it because it has a standard x86 processor. I have already saw and read tomshardware.com/forum/id-1825440/install-windows-intel-based-smartphone.html but it did not go in depth on how to do it so I am asking on this forums on a more in depth guide on how to do it. Thanks
Come on guys. Anybody? Somebody got to have the answer.
https://wiki.tizen.org/wiki/ZTEGeekV975
You could try available Tizen Firmware... if you are brave enough...
Btw...
I need Infos about this handset...
1.
Firmware available?
Maybe Download Link?
Flash Tool ?
2.
Anyway to dump memory?
JTAG supported?
UART?
Thanx in advance. :angel:
About Windows...
I don't know ZTE, but I don't think they would sell it with Android, if W8 would be alternate OS...
So you need some nice Developer, who port W8 for ZTE...
BUT...
Best Regards
Edit 1.
Found Firmware + Tools in this Thread:
http://forum.xda-developers.com/showthread.php?p=49421032#post49421032
Maybe interesting for research about Bootloader, Partition, etc...
Thanks! I'll try it
As a Senior member would you happen to know any developer who would be willing to port it to windows 8?
HI guys
I have a problem with samsung MTP device
My pc just doesnt show the MTP for any device expect apple devices so is there any way to fix that. is there any driver problem or what ? pls help me
Hello Thank you for using XDA Assist.
Yes usually you have to download device Drivers for the computer to recognize the device. Most new computers and OS can do that on a plug n play basis but sometimes it requires the user to manually download device drivers.
Hope this helps
Ragnar
Edit: 2 days no reply thread closed.
Hello
I have this android dongle MK809IV and I'm trying to flash/install any ROM (stock or custom) and I'm using Rockchip batch software for flashing it, I've installed the drivers and successfully connected MK809IV to Rockship Batch and now I got blue box but every time I try to flash it I get DOWNLOAD BOOT FAILED error.
I tried some different roms that I found but it seems none of them works.
Can someone please help me on this issue, I'm lost, I don't know what or where to search for the appropriate rom for my device.
Your help is highly appreciated.
I've managed to flash and install new firmware but now Wifi won't turn on
chip: Rockchip RK3229
wifi: Realtek RTL8703AS
dongle model: MK809IV
Can anyone help me to find the right firmware?
thank you
Anyone?
I guess nobody has an opinion on this issue
...any suggestion?
Hi
Your model is the 2GB/8GB one? Can you give me link to that firmware you flashed? I can't find any ROM that works, I need help.
Thanks. Regards
Arsim2014 said:
I've managed to flash and install new firmware but now Wifi won't turn on
chip: Rockchip RK3229
wifi: Realtek RTL8703AS
dongle model: MK809IV
Can anyone help me to find the right firmware?
thank you
Click to expand...
Click to collapse
Hi again.
You can get a working rom from the following link:
http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3229-devices/firmware-roms-tools-bg/623420-mk809iv-rk3229-bricked-how-to-unbrick?p=646882#post646882
It worked for me
pjamfaro said:
Hi again.
You can get a working rom from the following link:
http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3229-devices/firmware-roms-tools-bg/623420-mk809iv-rk3229-bricked-how-to-unbrick?p=646882#post646882
It worked for me
Click to expand...
Click to collapse
Thank you, I'll give it a try
IT WORKED!!!
It Worked!!!
thank you pjamfaro :good:
I manage to install the firmware you listed with android 5.1, have the same hardware as you with 2gb of RAM, but now it only shows 512mb RAM, and everything is laggy. any suggestions?