[Q] About Install Kernel - HTC Sensation

hello i want to flash a kernel on my Sensation XE from Bootloader. some custom kernels have boot.img but else haven't Boot.img how i flash them?

human.n74 said:
hello i want to flash a kernel on my Sensation XE from Bootloader. some custom kernels have boot.img but else haven't Boot.img how i flash them?
Click to expand...
Click to collapse
all kernels can be flashed from recovery
if you are S-ON use 4ext recovery and enable smartflash before flashing a kernel

Related

ViperSAGA 2.1.1 Wifi not working

Hi, I flashed rom, but wifi is not working.
If someone could assist me with hboot and radio?
With other roms I had no trouble with anything, so some assist with hboot and radio would be needed to get this rom working.
ViperSAGA 2.1.1 with all otas
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
stock kernel, Amibuddha btb and patched
with either wifi not working... :/
AW: ViperSAGA 2.1.1 Wifi not working
I don't think this can have anything to do with radio or hboot. I assume you flashed the boot.img after flashing the Rom and after every kernel installation (the boot.img from the kernel you flashed)?
teadrinker said:
I don't think this can have anything to do with radio or hboot. I assume you flashed the boot.img after flashing the Rom and after every kernel installation (the boot.img from the kernel you flashed)?
Click to expand...
Click to collapse
Well, I havent flashed boot.img separately. I tried yesterday other roms also, (desire xs and sabsa) . Aroma should flash correct boot.img? i assume.
AW: ViperSAGA 2.1.1 Wifi not working
You are htcdev unlocked, still s-on. This means you can't write to the /boot partition from recovery, only through fastboot. So after flashing a new Rom or kernel, you have to extract the boot.img and flash it manually in cmd.
Puntti said:
Well, I havent flashed boot.img separately. I tried yesterday other roms also, (desire xs and sabsa) . Aroma should flash correct boot.img? i assume.
Click to expand...
Click to collapse
After installing the rom you have to flash the boot.img
this is the guide that i used to flash custom roms.
http://forum.xda-developers.com/showthread.php?t=1525100
Device: HTC Desire S (S-ON HTCDEV unlocked)
ROM: Desire XS Version 1.1
Recovery: 4EXTRecovery.
HBOOT 2.00.2002

Can't install any custom Roms....

.....because I've got Hboot 1.27
Tried, but just stuck in boot loop etc.
I've unlocked etc....but nothing works for s-off...the tool says device not supported etc.
Can someone help me out with sensation z710e?
need s-off, but cant do it.....been trying for hours.
thanks
Matt
matthew33 said:
.....because I've got Hboot 1.27
Tried, but just stuck in boot loop etc.
I've unlocked etc....but nothing works for s-off...the tool says device not supported etc.
Can someone help me out with sensation z710e?
need s-off, but cant do it.....been trying for hours.
thanks
Matt
Click to expand...
Click to collapse
You CAN flash roms with hboot 1.27 and S-ON.
The most likely reason for a bootloop is incorrect boot.img
Either flash roms using 4ext SmartFlash
Or manually flash boot.img via
Code:
fastboot flash boot boot.img
matthew33 said:
.....because I've got Hboot 1.27
Tried, but just stuck in boot loop etc.
I've unlocked etc....but nothing works for s-off...the tool says device not supported etc.
Can someone help me out with sensation z710e?
need s-off, but cant do it.....been trying for hours.
thanks
Matt
Click to expand...
Click to collapse
Look here for flashing ROMs with s-on:
http://forum.xda-developers.com/showthread.php?p=25587345
Look here for s-off(unlocked bootloader):
http://forum.xda-developers.com/showthread.php?p=25202517
Sent from my Ouya
Far_SighT said:
You CAN flash roms with hboot 1.27 and S-ON.
The most likely reason for a bootloop is incorrect boot.img
Either flash roms using 4ext SmartFlash
Or manually flash boot.img via
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
I've downloaded viper rom 1.6.3.....do i have to locate a certain file/folder from the extracted rom in order to flash it?
Matt
matthew33 said:
I've downloaded viper rom 1.6.3.....do i have to locate a certain file/folder from the extracted rom in order to flash it?
Matt
Click to expand...
Click to collapse
IF you have 4ext recovery (enable smartflash), perform a full wipe (after backup) and flash.
ELSE, extract boot.img from your rom, boot into fastboot and use
Code:
fastboot flash boot boot.img

My Sensation won't boot after flashing MIUI V5 4.2.14

I'm on HBOOT 1.27.00000 and S-ON.
Now I've just flashed MIUI v5 4.2.14 and it won't boot after restart.
It stays at the HTC white screen.
Is there anyone kind enough to guide me how to properly install MIUI, or, at least back to the stock rom?
I'm desperately needing help here :crying:
Taetsu21 said:
I'm on HBOOT 1.27.00000 and S-ON.
Now I've just flashed MIUI v5 4.2.14 and it won't boot after restart.
It stays at the HTC white screen.
Is there anyone kind enough to guide me how to properly install MIUI, or, at least back to the stock rom?
I'm desperately needing help here :crying:
Click to expand...
Click to collapse
what recovery do you have?
rzr86 said:
what recovery do you have?
Click to expand...
Click to collapse
I'm on ClockworkMod Recovery v5.0.2.0
if that helps..
Taetsu21 said:
I'm on ClockworkMod Recovery v5.0.2.0
if that helps..
Click to expand...
Click to collapse
Change the recovery to 4ext latest 1.0.0.6 rc1 ,format everything except sd card from recovery after that enable smartflash and flash Rom,if doesn't boot up again you'll need to flash boot.img from pc via fastboot
Sent from my HTCSensation using xda app-developers app
Mile_zdr said:
Change the recovery to 4ext latest 1.0.0.6 rc1 ,format everything except sd card from recovery after that enable smartflash and flash Rom,if doesn't boot up again you'll need to flash boot.img from pc via fastboot
Sent from my HTCSensation using xda app-developers app
Click to expand...
Click to collapse
I finally figured it out.
After flashing the rom, have to flash the boot.img (inside the rom zip file) as well, using the command:
Code:
fastboot flash boot boot.img
Now I'm able to boot into MIUI and enjoy the new rom!
I never have to do this extra step with flashing my Desire HD, not sure why it doesn't work this time.
Anyway, thanks for your help
Taetsu21 said:
I finally figured it out.
After flashing the rom, have to flash the boot.img (inside the rom zip file) as well, using the command:
Code:
fastboot flash boot boot.img
Now I'm able to boot into MIUI and enjoy the new rom!
I never have to do this extra step with flashing my Desire HD, not sure why it doesn't work this time.
Anyway, thanks for your help
Click to expand...
Click to collapse
because on S-ON devices boot partition is still protected
rzr86 said:
because on S-ON devices boot partition is still protected
Click to expand...
Click to collapse
So I don't really need S-OFF to flash any custom roms that I want right?
I will just have to take the extra step of flashing boot.img..
Because I can't seem to work out S-OFF on my sensation despite whole afternoon of hard-works.
Is there an easy way to S-OFF sensation other than the paper-clip hack?
Taetsu21 said:
So I don't really need S-OFF to flash any custom roms that I want right?
I will just have to take the extra step of flashing boot.img..
Because I can't seem to work out S-OFF on my sensation despite whole afternoon of hard-works.
Is there an easy way to S-OFF sensation other than the paper-clip hack?
Click to expand...
Click to collapse
no need to S-OFF for flashing custom roms
and unfortunately there is no other way except wire trick
but you can always flash 4ext recovery and avoid the extra step for boot.img

HTC Sensation XE Shift from ViperSC2_5.1.0 to ViperS 2.0.2 Help

my HTC Sensation XE is stuck in htc logo boot loop after i flash ViperS 2.0.2 on ViperSC2_5.1.0!!!!!!!!!
What is it i am missing do i need to flash kernel also if yes can someone help me plz.
I also tried to restore my default rom from recover but same erroe.
I again flash ViperSC2_5.1.0 it works fine??
My device:
HTC Sensation XE
HBOOT 1.29.0000
S-ON
4EXT Recovery
notynadir said:
my HTC Sensation XE is stuck in htc logo boot loop after i flash ViperS 2.0.2 on ViperSC2_5.1.0!!!!!!!!!
What is it i am missing do i need to flash kernel also if yes can someone help me plz.
I also tried to restore my default rom from recover but same erroe.
I again flash ViperSC2_5.1.0 it works fine??
My device:
HTC Sensation XE
HBOOT 1.29.0000
S-ON
4EXT Recovery
Click to expand...
Click to collapse
Did you format all praticions except sd card from recovery and after that did you enable smartflash before flashing the rom? If yes for both, you'll need to flash boot.img from pc via fastboot here is a guide http://forum.xda-developers.com/showthread.php?t=1631861 step EXTRA1
Thanks
Mile_zdr said:
Did you format all praticions except sd card from recovery and after that did you enable smartflash before flashing the rom? If yes for both, you'll need to flash boot.img from pc via fastboot here is a guide http://forum.xda-developers.com/showthread.php?t=1631861 step EXTRA1
Click to expand...
Click to collapse
Thanks!
Enabling the smartflash before flashing solve the problem and i flashed ViperS 2.0.2! it boot just fine.
will it also restore my stock rom backup?
notynadir said:
Thanks!
Enabling the smartflash before flashing solve the problem and i flashed ViperS 2.0.2! it boot just fine.
will it also restore my stock rom backup?
Click to expand...
Click to collapse
yes it will but don't forget to enable smartflash again

about s-off?

do i need s-off in flashing roms. can't i just flash a rom with twrp then flash the kernel with fastboot. because i've flashed cm 11 on my friend's sensation xe and all are force close
klark231 said:
do i need s-off in flashing roms. can't i just flash a rom with twrp then flash the kernel with fastboot. because i've flashed cm 11 on my friend's sensation xe and all are force close
Click to expand...
Click to collapse
no you don't need S-OFF for flashing roms
but you have to do an extra step after flashing the rom
to flash the boot.img via fastboot command
or install 4ext recovery and before flashing the rom enable smartflash from 4ext
rzr86 said:
no you don't need S-OFF for flashing roms
but you have to do an extra step after flashing the rom
to flash the boot.img via fastboot command
or install 4ext recovery and before flashing the rom enable smartflash from 4ext
Click to expand...
Click to collapse
yes i know that part. about fastboot. hmmm i've found the solution but thanks. anyways. it turns out that the apps force close when there is no sdcard. yeah literally when there is no sdcard. browser, mms and some apps won't work :V

Categories

Resources