[Nook HD+ / MOD] CM10.1 EMMC/SD Install "tabletUI" modification - Updated: 7/12
Please make certain you have at least booted the you're OS once and gone through the setup menu of google apps.
TabletUI flashable zip for versions of verygreen's cm-10.1-UNOFFICIAL-ovation-emmc just flash it over your working build and it will enable TabletUI interface.
http://fanoush.wz.cz/android/
This was created using Auto-Patcher 2.9.1
nice will give it a try
Will I have to re-flash this every time there's an update to the ROM?
This is awesome.. I just installed on nook+ works great. Love how navigation bar is closer to left than old center which had to stretch my thumb a lot. Great work
Ogre6473 said:
Will I have to re-flash this every time there's an update to the ROM?
Click to expand...
Click to collapse
I assume that we will have to re-flash (as we flash after the ROM): But will we need a new version every time there is a new ROM..?
Is this just made with Autopatcher? Because that is what it looks like.
gandalf_grey91 said:
Is this just made with Autopatcher? Because that is what it looks like.
Click to expand...
Click to collapse
Yes.
LucaToo said:
I assume that we will have to re-flash (as we flash after the ROM): But will we need a new version every time there is a new ROM..?
Click to expand...
Click to collapse
Yes but I'll be updating or you can use autopatcher to patch your own...
xboxexpert said:
Yes but I'll be updating or you can use autopatcher to patch your own...
Click to expand...
Click to collapse
Happy to leave it to you..!
BTW works well - so far no issues with it screwing up Pie Controls on full screen as has been reported in other threads.
Thanksforthetablet layout.
For me, battery percent doesn't work, it shows an icon.
Wifi on/off doesn't appear on the panel either.
Is there a way to make the panel include the user switcher?
hd32 said:
Thanksforthetablet layout.
For me, battery percent doesn't work, it shows an icon.
Wifi on/off doesn't appear on the panel either.
Is there a way to make the panel include the user switcher?
Click to expand...
Click to collapse
For me battery percent works but then again I had it setup in settings prior to flashing the zip. I use Circle with percentage. The battery percentage however doesn't show when the battery is either FULL or Charging and Full.
The Wifi on/off is not on the menu but can be accessed by clicking it then the on/off is available in the menu to follow. The software I used to create the zip doesn't have options to add stuff or modify the actions.
Without heavier framework knowledge I am unable to make any drastic changes to the UI.
xboxexpert said:
For me battery percent works but then again I had it setup in settings prior to flashing the zip. I use Circle with percentage. The battery percentage however doesn't show when the battery is either FULL or Charging and Full.
The Wifi on/off is not on the menu but can be accessed by clicking it then the on/off is available in the menu to follow. The software I used to create the zip doesn't have options to add stuff or modify the actions.
Without heavier framework knowledge I am unable to make any drastic changes to the UI.
Click to expand...
Click to collapse
No worries for me. I *much* prefer the tablet mode to the "phablet" mode. Thank you!
Wow perfect！ Thanks!
Wow perfect！ Thanks! I will flash it!
I am getting a "signature verification failure"
Tried re-downloading 3 times and trying to flash each time.
Sent from my Barnes & Noble Nook HD+ using xda premium
Delvien said:
I am getting a "signature verification failure"
Tried re-downloading 3 times and trying to flash each time.
Sent from my Barnes & Noble Nook HD+ using xda premium
Click to expand...
Click to collapse
Perhaps turn off signature verification...or safely disconnect your microSD card after transferring the zip file to it as opposed to just unplugging it...
xboxexpert said:
Perhaps turn off signature verification...or safely disconnect your microSD card after transferring the zip file to it as opposed to just unplugging it...
Click to expand...
Click to collapse
I just tried that before coming back here to see your message. It worked with that. Probably something with TWRP
Sent from my Barnes & Noble Nook HD+ using xda premium
Ok, I have to ask, will this work for hybrid mode?
Sent from my Barnes & Noble Nook HD+ using Tapatalk 2
monkey3ddd said:
Ok, I have to ask, will this work for hybrid mode?
Sent from my Barnes & Noble Nook HD+ using Tapatalk 2
Click to expand...
Click to collapse
Makes no difference whether emmc, hybrid or original SD. All that matters is the ROM date.
Sent from my Nook HD+ running CM10.1 on emmc.
Anyone have a status 7 error message set_perm. Downloaded from xda from my cup then to the nook, also tried from the nook, and then from my phone to the nook and none of them work. Running the latest version of cm10.1 hybrid and it boots and all with no problem. Any ideas?
Sent from my EVO using xda premium
makavelisk said:
Anyone have a status 7 error message set_perm. Any ideas?
Click to expand...
Click to collapse
Yes, flashed to sd version and had the same error. Then tried to reboot to stock and had reboot loop. Looks like this tabletui zip is hardcoded for emmc installation. It always patches system in emmc no matter what cwm you use for flashing. Had to restore 2.1.0 backup to have stock OS working again. So dont flash this unless you have cm10.1 instaled on emmc.
This is the part that mounts system partition and unpacks the mod
Code:
mount("ext4", "EMMC", "/dev/block/platform/omap/omap_hsmmc.1/by-name/system", "/system");
package_extract_dir("system", "/system");
It always mounts internal system partition. I guess there is some way to code this in more relative way so it takes system partition location from CWM settings?
Related
Sorry can't post in dev section yet but drod was nice enough to let me get my hands on cyanogen mod 7 release candidate 2 and said I could share. This is not an official release and not supported yet. To flash place zip on internal sd boot in clockwork wipe data and install zip.
I used clockwork .08
Update: fix for internal sd problem
Credit goes to drod2169
Updated Install
www.mediafire.com/?usumbwxusn8vnzj
Here is a link to the gapps for Gingerbread that gives full market out of the box
I installed the rom first and let it boot up then went back in clockwork and installed gapps. Don't know if it matters.
http://goo-inside.me/gapps/latest/7/universal/
When you say the internal SD doesn't work, do you mean it doesn't show up at all? Or could it possibly be /mnt/emmc?
Roadzero said:
Sorry can't post in dev section yet but drod was nice enough to let me get my hands on cyanogen mod 7 release candidate 2 and said I could share. This is not an official release and not supported yet. only problem I saw is the internal sd doesn't work. To flash place zip on internal sd boot in clockwork wipe data and install zip. Clockwork sees the internal sd just not cm 7.
Sorry can't post links yet
w w w dot mediafire dot c o m /?wxbtl23g46vxvho
Click to expand...
Click to collapse
Anyone tried this yet?
Went thru the archive, seem genuine, I may give it a try later, I'll post mileage...
Lets make this easy: http://www.mediafire.com/?wxbtl23g46vxvho
Up and running as I type. Looks really nice. Put soft buttons on status bar which will help me at night not having to feel for the home and back buttons on the side since they don't illuminate. Market is full and working quite nicely as it backed up all of my purchases and dl's right away.
Only thing not working for me so far is the docking station. Still a nogo. Just came off of bitrix to try this......
Well done!!!
dezufnoC said:
Up and running as I type. Looks really nice. Put soft buttons on status bar which will help me at night not having to feel for the home and back buttons on the side since they don't illuminate. Market is full and working quite nicely as it backed up all of my purchases and dl's right away.
Only thing not working for me so far is the docking station. Still a nogo. Just came off of bitrix to try this......
Well done!!!
Click to expand...
Click to collapse
FruitLoop here, even after wipe... curious... retrying...
Tried wipe, removing SDHC cart, reflash still a FruitLoop oh weel back to
my trial of Calkulin's G-Tab v1.0 [ 3991 l Battery Saver script w/ Profiles
which boot...
P00r said:
FruitLoop here, even after wipe... curious... retrying...
Tried wipe, removing SDHC cart, reflash still a FruitLoop oh weel back to
my trial of Calkulin's G-Tab v1.0 [ 3991 l Battery Saver script w/ Profiles
which boot...
Click to expand...
Click to collapse
Odd it worked fine for me coming out of vegan 5.1.1 just by wiping data. you could try wiping system or re downloading the zip
Where is the recovery folder? I downloaded the update...... .zip folder and it wouldn't load the rom, CWmod said it was "bad"
tomgillotti said:
Where is the recovery folder? I downloaded the update...... .zip folder and it wouldn't load the rom, CWmod said it was "bad"
Click to expand...
Click to collapse
What version clockwork are you using? I used .08
Installed this last night from a link he sent on twitter. Think its the same version. Only issue i see so far is my sdcard is not showing up. I get sdcard for internal memory but not for my actual card. A message comes up when I insert it saying that one was inserted then it says its safe to remove. Not sure how to mount it. I don't see it in /mnt either.
P00r said:
FruitLoop here, even after wipe... curious... retrying...
Tried wipe, removing SDHC cart, reflash still a FruitLoop oh weel back to
my trial of Calkulin's G-Tab v1.0 [ 3991 l Battery Saver script w/ Profiles
which boot...
Click to expand...
Click to collapse
Calkulin has a nice format all zip (see first post here)that you flash like a rom before flashing a new rom. works good only 1 step instead of many. only thing it doesn't seem to format is Delvik so that has to be done manually but it cuts out a few steps in the rom prep work.
This rom has the same shape icons in the right corner as the vegan roms and the same notification icons as cm rc2. The mounts are sdcard and emmc for external. The res has been changed so some apps wont scale properly. If it wasn't for that I would have kept using it because I prefer the minimal notification icons compared to vegans experimental new icons.
qubit76 said:
This rom has the same shape icons in the right corner as the vegan roms and the same notification icons as cm rc2. The mounts are sdcard and emmc for external. The res has been changed so some apps wont scale properly. If it wasn't for that I would have kept using it because I prefer the minimal notification icons compared to vegans experimental new icons.
Click to expand...
Click to collapse
On my tab the internal storage is mapped to /sdcard while /emmc is empty. my external (actual) sdcard is nowhere to be found. settings-storage shows the sdcard as having 13.07gb total. my actual sd card is 4gb so this is confirming its actually the internal memory. All the Vegan roms showed my sdcard as mounted at /sdcard2. was just curious as to how I should go about mounting my sdcard so i can access it? I have no issues with this memory mounting setup just curious how to get my card to be mounted. Can i type something in a terminal to mount it?
I realize that the vegan series is a moddified version of cm and this is an attempt to be true cm tweaked to run on our tabs and that some things are gonna be different. So if I am missing something with the sdcard mounting please let me know. I think Drod2169 does great work and have loved rubix on my X for months now.
I jumped on this rom from Bitrix and my sd card reads exactly the same as it did before as sdcard while my internal is emmc. It seems as if it's not liking the change from your previous association to this new association of internal/external storage. Were you using a pre-Gingerbread rom before? If so check out this link for the association of storage files...this may help
I also use rootexplorer and have no problems accessing/copying/moving files etc.
I was on Calkuins beta, then wiped and installed vegan ginger experimental 3/8/11. After it started and loaded apps from market Drod2169 sent me a link to this one on twitter so I wiped and installed this. Maybe that the kernel didn't install right our something.will try to redownload and try again.
Sent from my DROIDX using Tapatalk
Unofficial? So it isn't really Cyanogen 7 RC 2 then. Just saying.
adampdx said:
Unofficial? So it isn't really Cyanogen 7 RC 2 then. Just saying.
Click to expand...
Click to collapse
It is cm 7 rc2 I say unofficial release because it may be changed slightly before they officially announce its release. If you don't want it you don't have to use it, I just thought I would post it for people that do.
So. It turns out that if I knew how to read I could have fixed my problem a while ago. The first post says right on it that it was updated to fix sdcard problem. The version I had was from before this "fix". Downloaded updated one and installed. All is well. Market seem good so far all items are mounting speed seems good. Don't use youtube so cant comment on video but flash works on the sites i've tried it on. Thanks Drod2169 for giving us some more of your time.
I'm curious as I've ran bittrix's unofficial and several of gojimi's Ginger vegan. Do installed apps show up on the market under My Apps? On every other Ginger rom I've tried, Market-My Apps just shows nothing. Love gingerbread but it makes it a pain trying to keep apps up to date. Also does purchasing work, or does vending FC when trying to?
Thanks
The reason for this User Thread is so that we can keep the development thread clean. Post in the development thread only if you have something useful to contribute such as a logcat, or any dev-related comments. Post any suggestions, bug reports, questions or comments about the rom in this thread,
What's working and what's not?
Working:
Camera - Yes, this means Camcorder also works! 1080P Video shooting and playback work great.
Bluetooth
WiFi
Audio
SD Card Storage
Battery Meter
And of course Hardware Acceleration!
Not Working:
RIL (Mobile Network) - This means no calls, no SMS, no Data, no anything related to the functions of your SIM Card! T-Mobile WiFi Calling also doesn't work.
Information On Dual Booting Roms
Since we currently have an issue with the network radio on our CM10 roms, most people will not be able to use this rom as a daily driver, and would prefer to stay on a fully functioning GB rom. This dual booting method lets us have the best of both worlds! You can have a buttery smooth and fast CM10 rom for enjoying all of Android Jellybean 4.2.1 goodies and a fully function Gingerbread rom when ever you need to make a call and such. For now, this is the best we can do. It's simple and very fast to switch between roms. What else could you ask for? ;D
Installation Instructions Including Dual Booting
DISCLAIMER
I (WE) AM NOT RESPONSIBLE of any damages to your device related to the use of this ROM or the dualboot toolkit. You do this at your own risk. Even though this has been tested and works well, using NVFLASH may brick your device if done incorrectly.
This ROM comes in two flavours: The dualboot toolkit or the Original flashable ROM
Dualboot ROM Instructions
WARNING! NVFLASH will format EVERYTHING, including internalSD. Make sure you backup your important files on your externalSD card
PART 1 - Resizing system partition
1) Unzip the dualboot toolkit and unzip NVFLASH_Resizer-G2X.zip.
2) Power off your phone and remove the battery. Keep vol. up and vol. down held and plug the phone via USB to a WINDOWS computer.
3) Windows should add an "APX driver". Go to control panel -> Device manager and right click on it -> Update driver -> search in system. Then, browse to the drivers folder inside the NVFLASH package and choose nvidiausb.inf. Approve any error messages (Windows 8 users read my FAQ). Install the Nvidia Fastboot driver.
4) Unplug your phone and hold down vol.up and vol.down. Replug it again and double click on flash.bat inside the NVFLASH folder. KEEP BOTH BUTTONS HELD DOWN DURING THE WHOLE PROCESS!.
5) When NVFLASH is done, unplug the phone and put back the battery. Reboot into recovery with power + vol. down. Plug it back and go to mounts and storage -> mount USB storage. If your PC asks to format the internal SD card, select yes.
PART 2 - Installing ROMS
1) Download the desired "call/SMS" ROM and extract boot.img from it's flashable zip. Rename it to boot1.img. Extract Step3_bootimg.zip from the dualboot toolkit and copy-paste boot1.img into system/boot, replacing the file that is already there. Repack Step3_bootimg.zip.
2) Copy-paste your desired ROM into the 0dualboot folder and send it to your device SDcard with everything it contains (your device should already be in the "mount USB storage" menu).
3) From the recovery, flash Step1_enabler.zip. When the screen goes black, hold power + vol. down to get back into recovery.
4) Flash your desired ROM, then Step2_ROM1.zip. Reboot to the OS.
5) You should have a Systemchanger app. Open it, click on "Switching" and give root permissions. When the screen goes black (again...), hold power + vol. down to get into recovery.
6) Flash ROM2.zip and Step3_Bootimg.zip and reboot in the OS
And there you go! To switch from one OS to another, just open the systemchanger app and click on "switching"!
Credits to bihariel for the original method. See the original thread here.
Original flashable zip ROM instructions
1) Boot into recovery with power + vol. down
2) Wipe data/cache, then mounts and storage -> format system
3) Flash this ROM
4) Advanced -> Wipe dalvik cache and fix permissions
5) Reboot and enjoy!
Special trick : In settings, go to About phone and click 6 times on Build number. This will pop up the developer and performances options. In performances options, CPU settings, change the governor from INTERACTIVE to SMARTASSV2.
Downloads
ROM with DUALBOOT Toolkit ***BETA***
DOWNLOAD HERE!
Original flashable ZIP (For single boot)
DOWNLOAD HERE!
Credits
See Mazout360s original thread here for the full list!
Thanks to bihariel for the original method for the Optimus 2X which I adapted for the P999. Great job!
Special thanks to Core Memory for helping me start this project[/CENTER][/QUOTE]
*All Information On this User Thread is from Mazout360s Thread in the Dev forums. Credits go to him for the Instructions/Downloads/Etc.
Quick template for now.. I'll update it as soon as I can.
Mazout Kernel on Stock 2.3.4
I flashed Mazout360's GB kernel over kwes' rooted 2.3.4/March 2012 basebannd. Was running pretty smooth, but had some problems
> Bluetooth icon at top of screen did not turn off "connected" status when I turned off my headset (BlueAnt q2.1)
> Had a few freezes. Installed SetCPU to keep max speed at 1015MHz but still some stops. Some out of nowhere, some in the middlle of doing stuff
> Finally started shutting down often. Tried to get a terminal emulator from the Market, but Market started crashing, even after several reboots. Could not get a kmsg to send.
Reinstalled my nandroid. No time at the moment to play more, need my phone reliable for some days to come. Hope lots of people try this kernel out and that I get more time with it. Nice to have new Dev activity for the G2x.
Quick question, i was wondering if it matters what zip tool we are using? Can i use 7zip for this, or should i use winzip?
Sent from my Mazout driven Reborn Hellbird.
grantusmantus said:
Quick question, i was wondering if it matters what zip tool we are using? Can i use 7zip for this, or should i use winzip?
Sent from my Mazout driven Reborn Hellbird.
Click to expand...
Click to collapse
Shouldn't matter, but I always use Winrar.
Micro SD card not detected
I was following along the steps and everything was going well until step 5 in part 1. when i rebooted my phone into recovery and pulged it into the PC nothing happened even though i followed exactly what the steps say, then i continued on and everything was going well until the end, where i found out that i couldn't get the data that I backed up to my Micro SD card because the phone doesn't see it.
Please help, I'm a noob around here.
I appreciate all the great work
did this project die?
reeshmd23 said:
did this project die?
Click to expand...
Click to collapse
No it didn't. My build computer broke and I need to setup a new HDD with my build environment. I'll make a new version as soon as possible.
hello,
I have dualboot now with hellfire2.4.2 and cm10 mazout's. So one is cm 7 and the other one is cm 10, I want to flash kernel but how? If I flash cm7 kernel will it block the cm10 rom or vice-versa?
guys I have just realized that I do not have dualboot after that steps
5) You should have a Systemchanger app. Open it, click on "Switching" and give root permissions. When the screen goes black (again...), hold power + vol. down to get into recovery.
6) Flash ROM2.zip and Step3_Bootimg.zip and reboot in the OS
I had systemchanger app and clicked on switching after that I flashed mazout's rom then when I open app drawer in cm10 rom, I noticed that I do not have systemchanger app anymore nor camera app.?? what should I do? If I do all steps all over again sould it be working ?
0b095 said:
hello,
I have dualboot now with hellfire2.4.2 and cm10 mazout's. So one is cm 7 and the other one is cm 10, I want to flash kernel but how? If I flash cm7 kernel will it block the cm10 rom or vice-versa?
guys I have just realized that I do not have dualboot after that steps
5) You should have a Systemchanger app. Open it, click on "Switching" and give root permissions. When the screen goes black (again...), hold power + vol. down to get into recovery.
6) Flash ROM2.zip and Step3_Bootimg.zip and reboot in the OS
I had systemchanger app and clicked on switching after that I flashed mazout's rom then when I open app drawer in cm10 rom, I noticed that I do not have systemchanger app anymore nor camera app.?? what should I do? If I do all steps all over again sould it be working ?
Click to expand...
Click to collapse
If you flash another ROM, you have to flash the corresponding stepX....zip file right after before rebooting, else you won't have the dualboot app.
Since android 4.2.2 just got out, I'll wait until it gets stable and make my upcoming build out of it For now, my phone battery doesn't work very well so I can't really test anything until I get a new one.
Hey. I got everything to work and am dualbooting nicely. My problem is kernel. I flashed a recent CM7 with this and everything went fine. Then I went to install the most recent CM7 kernel from Maz (the OC) and that works until I switch to Rom2 and back. Then the wifi gets an error and wont do anything. The kernel wont stick. Did I miss something?
Also, last night went to bed with my phone charging and when I woke up my phone was burning hot. Had Max OC at 1100.
Thanks! Works great having a taste of 4.2.1 and a phone!
Sent from my LG-P999 using xda app-developers app
Mazout360 said:
If you flash another ROM, you have to flash the corresponding stepX....zip file right after before rebooting, else you won't have the dualboot app.
Since android 4.2.2 just got out, I'll wait until it gets stable and make my upcoming build out of it For now, my phone battery doesn't work very well so I can't really test anything until I get a new one.
Click to expand...
Click to collapse
thank you, I see the problem now, and two question more; do I have to redo PART 1 - Resizing system partition everytime when I install different rom combinations or reinstall same roms and does that Resizing system partition harmful/useless or slows down the phone IF I only use 1 ROM?
I'm considering the dual boot, but want to know if it's possible to go back to single boot if/[hopefully] when radio is fixed. I suppose it'll be a matter of using original nvflash and format to have only one partition?
*edit1* Ok, now I'm getting my toes wet with this. fastboot.bin...what am I doing with this? The instructions say "install NVidia fast boot." Ok, but how? Or, has it already been installed with APX? I'm confused.
*edit2* ok I have dual boot! Wow this is interesting. Been running it through different combinations of reboots through system changer, and it seems when I update gb to the latest mazkrnl it won't stick after switching to jb and back again.
Do I need to use the boot.img from the kernel and repack it into step3?
Sent from my LG-P999
Oh shoots. Somewhere along the line I managed to break the wifi
MAC address comes up as unavailable in jb, just says error whenever I try to turn it on in gb. I'm thinking start the process over?
Sent from my LG-P999
adamiscool said:
Oh shoots. Somewhere along the line I managed to break the wifi
MAC address comes up as unavailable in jb, just says error whenever I try to turn it on in gb. I'm thinking start the process over?
Sent from my LG-P999
Click to expand...
Click to collapse
You need to flash a kernel. I am having the same problem, but flashing a kernel after switching back to GB fixes everything.
Edit: fyi I use maz's latest kernel 0205OC
Sent from my LG-P999 using xda app-developers app
Freakthis08 said:
You need to flash a kernel. I am having the same problem, but flashing a kernel after switching back to GB fixes everything
Click to expand...
Click to collapse
So, you mean that after using system switcher app, do power+vol up and flash kernel? Because any time I've tried that it only works on the first instance when i boot into gb. Once i go to jb and back again, the kernel goes back to stock. I'll try again though. Maybe fix permissions too!
Sent from my LG-P999 using xda app-developers app
adamiscool said:
So, you mean that after using system switcher app, do power+vol up and flash kernel? Because any time I've tried that it only works on the first instance when i boot into gb. Once i go to jb and back again, the kernel goes back to stock. I'll try again though. Maybe fix permissions too!
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
When you system switch back to GB, reboot back into recovery and flash a kernel. I wouldn't say it goes back to stock because if it did there wouldn't be a wifi error like that. But for some reason JB works fine nothing wrong I have seen yet, though I just noticed I don't have a camera/gallery.
After switching back and forth so much I just flash the kernel and don't do anything else because nothing has seemingly changed if I wipe anything or fix anything.
If Maz has answer for this I would be much appreciated or anyone else for that matter.
Sent from my LG-P999 using xda app-developers app
Edit: figured it out. A new boot1.img does need to get made with the new kernel already installed.
I created a new boot.img per the instructions on the original dual boot for p990 thread with maz kernel. Then I repacked step3_bootimg. Reflashed rom2 and the step3, then voila! So, you have to redo a couple steps if you want to update one rom's kernel.
Pic no longer related.
guys im having some trouble, when i go to the systemchanger app and grant permission instead of the screen going blank it gets stuck on a screen with two lg logos.
i think i havent installed the fastboot drivers correctly. i assumed it gets installed when i run flash.bat, but it may need to be installed seperately. if it needs to be installed how do i do it cause its just a .bin file and i have no idea what to do with it
---------- Post added at 10:20 PM ---------- Previous post was at 10:15 PM ----------
adamiscool said:
I'm considering the dual boot, but want to know if it's possible to go back to single boot if/[hopefully] when radio is fixed. I suppose it'll be a matter of using original nvflash and format to have only one partition?
*edit1* Ok, now I'm getting my toes wet with this. fastboot.bin...what am I doing with this? The instructions say "install NVidia fast boot." Ok, but how? Or, has it already been installed with APX? I'm confused.
*edit2* ok I have dual boot! Wow this is interesting. Been running it through different combinations of reboots through system changer, and it seems when I update gb to the latest mazkrnl it won't stick after switching to jb and back again.
Do I need to use the boot.img from the kernel and repack it into step3?
Sent from my LG-P999
Click to expand...
Click to collapse
hey, i have the same question, did u install the fastboot.bin separately or does it get installed with the flash.bat???
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Special thanks to @Adam77Root for his work to make this possible
Download links
Last version can be found here:
i9103
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
http://d-h.st/users/philz_touch/?fld_id=18564#files
Click to expand...
Click to collapse
Great to see Philz at R forum. First Adam's Official Cm10.1 then Official PAC now Official Support of Philz recovery.:good:
Edit: status 0 error occurs when i flash using cwm.
Disturbed™ said:
Edit: status 0 error occurs when i flash using cwm.
Click to expand...
Click to collapse
Replace the update-binary with this.
Sent from my GT-I9103
Adam77Root said:
Replace the update-binary with this.
Sent from my GT-I9103
Click to expand...
Click to collapse
Sorry,
Missed this from your feedback PM
Just fixed the zip on download server
Now, it should flash correctly
Many thanks for the support :good:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Disturbed™ said:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Click to expand...
Click to collapse
- About text going too fast: try to enable both "Easy Log View" and "Pause on Logs" options. This should fix it. In a future version, ui_print text will have its own row height, not shared with menu height
- About non working functions: provide a description + log (Advanced / Report Error and attach file here)
Phil3759 said:
- About text going too fast: try to enable both "Easy Log View" and "Pause on Logs" options. This should fix it. In a future version, ui_print text will have its own row height, not shared with menu height
- About non working functions: provide a description + log (Advanced / Report Error and attach file here)
Click to expand...
Click to collapse
Thanks for the quick response buddy. I will provide you the same. But its time for my B'day party.:laugh:
run's on stock ics?
Is a awesome recovery y test in s2
Sesme said:
run's on stock ics?
Is a awesome recovery y test in s2
Click to expand...
Click to collapse
Didn't get you buddy, come again.?
Sesme said:
run's on stock ics?
Is a awesome recovery y test in s2
Click to expand...
Click to collapse
This recovery is particularly for the galaxy r. Do not flash it on the s2
Sent from my GT-I9300
pulley06 said:
This recovery is particularly for the galaxy r. Do not flash it on the s2
Sent from my GT-I9300
Click to expand...
Click to collapse
no run's on stock ics no format no flash rom's...return to CWM 5
will this file works on n7100 to?
Disturbed™ said:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Click to expand...
Click to collapse
do you know if this file works on n7100 to?
xastunts said:
do you know if this file works on n7100 to?
Click to expand...
Click to collapse
No buddy.
xastunts said:
do you know if this file works on n7100 to?
Click to expand...
Click to collapse
But n7100 version exists since months now...
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
But n7100 version exists since months now...
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
yes but we have previous version philz_touch_5.06.1-n7100.zip
they got the philz_touch_5.07 which i believe has exfat support for ext sd and thats why i wanted it
xastunts said:
yes but we have previous version philz_touch_5.06.1-n7100.zip
they got the philz_touch_5.07 which i believe has exfat support for ext sd and thats why i wanted it
Click to expand...
Click to collapse
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago.
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago.
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
AAh damn it! i apologize! i mixed this up with the devil dual boot recovery! that one didnt have exfat support so i needed to mount another ext sd card in fat32 and swap it when i was in other roms. pretty annoying!
no ur right urs works! i know cause my exfat is inserted and booting through ur recovery all day long trying to find my soul mate os lol.
thx alot for the stuff you do for us! ur our hero!
is there a 100% full format option in ur recovery?
Phil3759 said:
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago. http://icons.media.xda-developers.com/images/editor/separator.gif
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
dr phil! i got you a question ! . is there a 100% full format option availible in ur recovery? if it is please state where.
even after using clean to install new rom i can see alot of junk files on my phones folders when connected to the pc. some photos from viber and alot of empty folders from apps i have uninstalled months ago.
is there no way to make a real clean whipe and have nothing at all left except important os file tree?
thx for reply! i try to pay you back in a good favour
xastunts said:
dr phil! i got you a question ! . is there a 100% full format option availible in ur recovery? if it is please state where.
even after using clean to install new rom i can see alot of junk files on my phones folders when connected to the pc. some photos from viber and alot of empty folders from apps i have uninstalled months ago.
is there no way to make a real clean whipe and have nothing at all left except important os file tree?
thx for reply! i try to pay you back in a good favour
Click to expand...
Click to collapse
remaining files are sdcard contents. YOu can remove by formatting sdcard. That won't be done automatically to avoid people loosing their data
Phil3759 said:
remaining files are sdcard contents. YOu can remove by formatting sdcard. That won't be done automatically to avoid people loosing their data
Click to expand...
Click to collapse
thx alot for reply! deeply appreciate it!:angel: how about using ur aroma browser that is built in inside the recovery and mark all files and just delete them ? will i be able to reboot into recovery mode after that? i was thinking that recovery files where flashed into a flash memory outside the phones internal memory to be a fail safe place harmless for beeing erased unless flashed with odin or flashed with any compatible recovery we got availible. am i right about this?
so my short question again is can i mark all folders and files and delete them directly through the built in aroma browser?
:good:
im willing to write you good comments and review here or on youtube if it is in ur demands.
Unofficial CyanogenMod 10.2 for the Kindle Fire HD 7"
*** USE AT YOUR OWN RISK! WHILE I TRY MY BEST TO PROVIDE WORKING KERNELS/ROMS, I AM NOT RESPONSIBLE IF THIS SOFTWARE OR ANYTHING I'VE WORKED ON SUDDENLY FRIES YOUR DEVICE. ***
BEFORE YOU BEGIN MAKE SURE YOU HAVE A 2ND-BOOTLOADER INSTALLED CORRECTLY AND CAN SEE THE BLUE LOGO DURING BOOTUP:
http://forum.xda-developers.com/showthread.php?t=2128848
NOTE: In this build I do not have the HBOGO or Voice Plus patches yet.
Download Information:
[LATEST][11/15] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: Download (Goo.im)
Mirror 2: Download (Crackflasher)
md5sum: a84b02121236bef1e55fe6afede8f320
[08/12] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/tate/cm10.2/cm-10.2-20130812-UNOFFICIAL-tate.zip
md5sum: c1b26682ef8cc8e0d087e242b74eecbf
[07/31] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/tate/cm10.2/cm-10.2-20130731-UNOFFICIAL-tate.zip
md5sum: 61ecbf61297a4b03a325638a55859398
Older builds can be found in the same folder on goo.im:
http://goo.im/devs/Hashcode/tate/cm10.2/
Download Google Apps:
http://goo.im/devs/Hashcode/gapps
(For Android 4.3)
PLEASE BE SURE TO WIPE SYSTEM & DATA/CACHE (FACTORY RESET) WHEN COMING FROM AMAZON STOCK SOFTWARE.
(It's the "Wipe" button and then "System" and then "Factory Reset" button in TWRP -- this does NOT clear your sdcard space)
Be aware that the "sdcard" space has changed slightly from ICS to JB4.2. You will find your stock amazon OS files in /data/media/ or "sdcard" on the Stock OS. But CM10.1 will create a sub directory "/data/media/0" and call that "sdcard". And in TWRP it will also use "data/media/0" as "sdcard". This has to do with multi-user settings. So when placing files on the "sdcard" be sure to check both locations before wondering why that file is missing.
CHANGES (always includes CM changes):
[11/15] SElinux now included in the kernel and set to permissive. I don't recommend turning it to enforcing as I'm still debugging the "deny" messages.
[08/12] Includes a Trebuchet patch to fix the screen flip-flop when trying to drag an icon in landscape (by XDA user Wickets^)
[08/12] All new "from source" sensor driver
[08/12] Temp. disable light sensor (due to recode of sensor driver)
[07/31] First CM10.2 build
FEATURES / WORKING:
3.0.50 kernel (up from a stock 3.0.8 kernel). This includes updates from Texas Instruments, Google and Kernel.org.
PowerVR Graphics Drivers: DDK [email protected] for Android (Jellybean compatible)
Audio
Camera
Wifi
Bluetooth
Sensors
HWAcceleration
HD Codecs for YouTubeHD and Netflix
HDMI video out is now correct and work across several resolutions. YMMV
DEVS
BUILDING THIS ROM:
First, read through Google's Android website about "how to setup a build environment":
http://source.android.com/source/initializing.html
[ COMING SOON ]
SCREEN SHOTS:
CURRENT KNOWN ISSUES:
When long pressing icons in landscape mode to move them, etc the screen will flip upside down for a moment and right itself. This causes the action to be aborted.
Rotation selection in games is hit and miss. Some work perfectly and some like to flip the device upside down. Still debugging what is causing this.
AUDIO: Any decoder which uses Dolby surround current has a lower volume than the rest of the system (Netflix, Google Movies, etc). It's a WIP.
AUDIO: Headset volume still may be lowish. Testing better ways of increasing volume w/o distortion. It's a WIP.
Sensors: Testing various sensors, gyro seems 90 degrees off, etc.
Holy Crap, this is amazing!!! Thank you, Hashcode!!! The work you put into your devices is 2nd to none!
Thanks Hashcode, great work :good:
i dont understand that thing of bionic libraries, can we take them from galaxy nexus? or it is imposible, i never heard of this before, that´s why i m asking this questions. and there are any important changes of performance in android 4.3 ? send me the build.prop, i m going to remove trim for this version, because android 4.3 has it
Gee wizzz, nice. Thanks a lot HASH:thumbup:
Sent from my Amazon Kindle Fire HD using xda app-developers app
persano said:
i dont understand that thing of bionic libraries, can we take them from galaxy nexus? or it is imposible, i never heard of this before, that´s why i m asking this questions. and there are any important changes of performance in android 4.3 ? send me the build.prop, i m going to remove trim for this version, because android 4.3 has it
Click to expand...
Click to collapse
I'm sure the bionic libs will get optimized for OMAP eventually. The version of Android rolling to the GNex is the same as this.
I would imagine that their performance benchmarks dropped as well.
Any idea why I would be getting "Unable to parse data" errors in Titanium when trying to restore my apps after updating? I made a fresh backup beforehand, updated and now I can't restore... Tried every option I could think of, including setting permissions, etc. and nothing is working.
Sent from my SPH-L710
AthieN said:
Any idea why I would be getting "Unable to parse data" errors in Titanium when trying to restore my apps after updating? I made a fresh backup beforehand, updated and now I can't restore... Tried every option I could think of, including setting permissions, etc. and nothing is working.
Sent from my SPH-L710
Click to expand...
Click to collapse
The old backup was for 4.2.2 apps and the system, the new 4.3 has different data and system info which is incompatible backwards. I'm running PA 4.3 and I get the same message also if you try selecting data only the system presents you with a warning that ROM might become unstable. That's my 2¢.
Sent from my Kindle Fire HD 7 using Tapatalk 4 Beta
south956 said:
The old backup was for 4.2.2 apps and the system, the new 4.3 has different data and system info which is incompatible backwards. I'm running PA 4.3 and I get the same message also if you try selecting data only the system presents you with a warning that ROM might become unstable. That's my 2¢.
Sent from my Kindle Fire HD 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Worth upgrading right now from original Hascode release?
I don't really see a difference and benchmarks are low, mine was 8856, also if you have apps that you want to restore with data you won't be able to. I'd stick with 10.1 until more develops for 10.2, but wouldn't hurt to try it yourself.
Sent from my Kindle Fire HD 7 using Tapatalk 4 Beta
Thank you for the work Hashcode! I have a question. Can I directly flash this 4.3 zip package over 4.2.2 without any wiping actions?
Well after I installed this ROM, I've decided to go back to my backup ROM Kinology 7.3.1. Went into recovery TWRP 2.6.0.0 advance wipe, and wiped everything except SD card. Went back and did a restore on my ROM Kinology 7.3.1(took 5-10 minutes), after the 5-10 minutes it said FAIL. This may not have something to do with this ROM, but just wanted to point it out there. If anyone had the same situation and found a fix to it, please help
EDITED: 8/2/13 1:55 AM
Went into TWRP and wipe everything again except SD card, and did a restore and restored like a charm!
You rock Hash ! :highfive:
eridroid said:
Thank you for the work Hashcode! I have a question. Can I directly flash this 4.3 zip package over 4.2.2 without any wiping actions?
Click to expand...
Click to collapse
no no no no no no no no no no
you are asking for trouble
eridroid said:
Thank you for the work Hashcode! I have a question. Can I directly flash this 4.3 zip package over 4.2.2 without any wiping actions?
Click to expand...
Click to collapse
Just wipe cache and dalvik
So far so good, haven't ran into any issues yet, nice to see MX Player updated their app, its my favourite player & it didn't support 4.3 until yesterday.
EDIT: Wait, the new Focal app is always upside down.
Can anyone upload it to another mirror? Goo.im is very slow for me for some reason.
Thank you for this Hashcode. Really appreciate your hard work. Keep 'em coming!
south956 said:
The old backup was for 4.2.2 apps and the system, the new 4.3 has different data and system info which is incompatible backwards. I'm running PA 4.3 and I get the same message also if you try selecting data only the system presents you with a warning that ROM might become unstable. That's my 2¢.
Sent from my Kindle Fire HD 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ahhh... Makes sense I guess. Silly there's no backwards compatibility though... Guess I'll have to revert back for now. I wonder if there'll ever be a way? Hopefully the devs of Titanium will figure it out!
Sent from my SPH-L710
ROM:
http://www.mediafire.com/download/8...-4.4.4.build.8.1-UNOFFICIAL-20141001-2013.zip
MD5
http://www.mediafire.com/download/o...build.8.1-UNOFFICIAL-20141001-2013.zip.md5sum
***********SOURCE************
Kernel:
http://www.mediafire.com/download/oc2b51rpgblasbd/linux_omap_ovation.tar.gz
(Yellow Kernel v14 + exfat filesystem added)
Miscellaneous build files:
http://www.mediafire.com/download/0oszo0esv70xig0/slim.tar.gz
Known Issues:
Hardware 'n' key isn't mapped to do anything.
Although kernel supports f2fs, I haven't found a good way to incorporate f2fs into the ramdisk/init files to actually support mounting of f2fs filesystems yet (I'll have to take a look at how other slim devices do it).
I believe quake is broken (easy to remove under slimcenter).
Exfat fs remains untested (If anyone has a large sdcard...)
None of these issues have I spent much time on...
Only lightly tested. No warranties or guarantees.
A terminal app can be found in /system/addon.d/app
Thanks for building this for Ovation. I'll try it over the weekend.
Sent from my CM11 Ovation on Tapatalk
OMGOMGOMGOMG. i am so glad to see this. i run slim on all my devices, and now the nook? hell yeah
thanks jon
Could someone post the zip download caption? Something like Slim-ovation-4.4.4.build.8.1-UNO..."
I won't be testing this at this stage, but I wanted to thank you for working on it. There's a good chance I will switch to it when it is more polished and stable, especially with f2fs support.
I have it up and running. All appears well thus far. Pretty snappy
Lookin good here (FYI I'm using TWRP 2.8). One question, I can't find where to turn on Advanced Power Menu features, like Reboot to Recovery. Yes, I activated Dev Options.
sent from my SlimKat Ovation on Tapatalk
neutronjeff said:
Lookin good here (FYI I'm using TWRP 2.8). One question, I can't find where to turn on Advanced Power Menu features, like Reboot to Recovery. Yes, I activated Dev Options.
sent from my SlimKat Ovation on Tapatalk
Click to expand...
Click to collapse
Go to settings/security/device administration/advanced reboot and choose either hide on lockscreen or show always. However, rebooting to recovery does not seem to work. When selecting it from the power menu, it just performs a regular device reboot.
Haven't tested everything but other than the reboot to recovery not working, the build seems pretty solid. Will continue to test further. I installed using TWRP 2.7.1, also flashed slim gapps 4.4.4 for build 8, which Slim team recommends. I used the mini gapps as opposed to full, I'd rather download the specific apps from PS as I need them.
OP, thanks again for giving us a new rom for a device where unfortunately, there are very few choices. :good: :good:
Mike T
How does this ROM compare to Succulent's or 10.2 roms? I've kept my wife's Nook on 10.2 since it's been the most stable ROM I've found. Tried CM11 several times with her hating the builds due to FC and reboots. I've always reverted back to backup of 10.2 rom.
webdroidmt said:
Go to settings/security/device administration/advanced reboot and choose either hide on lockscreen or show always. However, rebooting to recovery does not seem to work. When selecting it from the power menu, it just performs a regular device reboot.
Haven't tested everything but other than the reboot to recovery not working, the build seems pretty solid. Will continue to test further. I installed using TWRP 2.7.1, also flashed slim gapps 4.4.4 for build 8, which Slim team recommends. I used the mini gapps as opposed to full, I'd rather download the specific apps from PS as I need them.
OP, thanks again for giving us a new rom for a device where unfortunately, there are very few choices. :good: :good:
Mike T
Click to expand...
Click to collapse
I haven't had any reboots so far, just the browser FC's which seem to be pretty universal across every rom i've tried. I'm going to play around some more...
Have been using it for a few hours, looks really good. Exfat is working for me too. Will take a look at the sources later, might try f2fs at some point. Have you thought about setting up a github ?
Happy to NOT see the theme engine in the list of running apps ! This is awesome !
Sent from my BN NookHD+ using XDA Premium HD app
Exfat support lost after unmount
I unmounted my 64 Gb microSD (exFat format) to copy some videos onto it (physically removed the card so I could put it in my PC's card reader). When I re-inserted the card, the nook couldn't mount it, saying the filesystem was unsupported. No problem mounting & reading the card after reboot. I suspect it's just something in the rc.init ? Will look into it later...
How would one map that hardware button?
Great rom, but force of habit to hit N instead of soft keys.
Also, I just like hardware, too.
Volume buttons are switched currently, too. Mapping them to the normal up/down and a working N will make this amazing.
---------- Post added at 05:14 PM ---------- Previous post was at 05:09 PM ----------
I knew I was forgetting something!
Battery status says discharging (settings and qs tile), but the charging animation is working properly.
angelofmenoth said:
Battery status says discharging (settings and qs tile), but the charging animation is working properly.
Click to expand...
Click to collapse
The charging indicators and animations seem to be fine for me...and my volume is as expected in landscape mode. Wierd. I'm using Nova, are you?
sent from my SlimKat Ovation on Tapatalk
Charging indicator working after restart.
Weirdest thing is... the N key is mapped to home in the keylayout. Why does the kernel not read it?
And also, it can wake the device.
Probably the easiest way to fix the 'n' key mapping would be to do a diff between /system/usr/keylayout between this rom and say, the 4.4.3 build. Or just change the files out altogether.
I believe I gave all the necessary source files to recreate the build as I had it, if anyone wants to work on it further. I could have spent an extra day and made it build 8.2, but I wanted to work on other things (changed out my harddrive immediately after posting the rom). In the next upcoming weeks I'll be experimenting with building several other rom flavors and perhaps do a little more kernel work as well.
Hey, wherever the muse leads...
sent from my SlimKat Ovation on Tapatalk
I just tried replacing both keylayouts and keychars and it didn't seem to help the button mapping.