Hello Guys,
i have flashed a new Kernel v.4 from pryce09. with the lastest CWM
here the thread:
http://forum.xda-developers.com/showthread.php?t=2092968.
Today i will make a Autoupdate from CM Update to CM 10.1 RC2 but in boot the Device makes a bootloop not Update and started new to CM.
Manualy i click boot to Recovery Mode in CM Bar the device makes the same.
I Have reflashed the lastest CWM Touch too, but its the same problematic, the device cant start to CWM. Fastbooth goes.!
What can i do for make the Update ?
Comes this from the kernel that device is not boot to CWM ??
PLEASE HELP me
Thanks for the Answer to Pryce09
Fully power off your tablet
Start the tablet while pressing the volume down button
A menu with some little text in top left corner and three icons should appear
Press volume up
Your recovery should now start.
Problem solved
Sent from my HTC Vivid 4G using xda premium
Related
i'm a damn tool and i'm hoping one exists to get my tf300t tablet running again
i had it running beautifully with cm10, then i decided i'm gonna install the touch clockworkmod, but i didn't read the thread properly it was for a stock jb rom, so now when i press the power button, i'm stuck on the asus boot logo with " this device is unlocked" text in the upper left corner, and when i push power + vol down it locks up at " booting bootloader recovery image" , i'm wondering if there is anything i can do to save my tablet or is it bricked and there's absolutely no way of fixing it, thanks for your time
mikeseguin said:
i'm a damn tool and i'm hoping one exists to get my tf300t tablet running again
i had it running beautifully with cm10, then i decided i'm gonna install the touch clockworkmod, but i didn't read the thread properly it was for a stock jb rom, so now when i press the power button, i'm stuck on the asus boot logo with " this device is unlocked" text in the upper left corner, and when i push power + vol down it locks up at " booting bootloader recovery image" , i'm wondering if there is anything i can do to save my tablet or is it bricked and there's absolutely no way of fixing it, thanks for your time
Click to expand...
Click to collapse
Can't you just install the non jb recovery?
Sent from my SGH-T989 using xda app-developers app
mikeseguin said:
i'm a damn tool and i'm hoping one exists to get my tf300t tablet running again
i had it running beautifully with cm10, then i decided i'm gonna install the touch clockworkmod, but i didn't read the thread properly it was for a stock jb rom, so now when i press the power button, i'm stuck on the asus boot logo with " this device is unlocked" text in the upper left corner, and when i push power + vol down it locks up at " booting bootloader recovery image" , i'm wondering if there is anything i can do to save my tablet or is it bricked and there's absolutely no way of fixing it, thanks for your time
Click to expand...
Click to collapse
You're much better then me,my device even couldn't show "booting bootloader recovery image"
been through this
fastboot flash twrp jb ota version
its the only way
download asus jb update on website
extract zip
now it should just be the flashable.zip extracted from the asus official download
flash in twrp
reboot
seanzscreams said:
been through this
fastboot flash twrp jb ota version
its the only way
download asus jb update on website
extract zip
now it should just be the flashable.zip extracted from the asus official download
flash in twrp
reboot
Click to expand...
Click to collapse
thanks for your reply, i'm not really familiar with twrp, can you go a little more into detail as to how i need to use twrp, do i run it from windows or from the tablet, on my tablet i'm not able to access any type of recovery, it locks up as it's trying to boot bootloader kernel image, thanks so much for your help!
seshaz said:
Can't you just install the non jb recovery?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
how do i go about installing the non jb recovery? i can't access any type of recovery on the table to flash one, thanks
well i just found out by holding vol up and the pinhole reset button then 3 seconds release the reset button while still holding vol up, i can get my computer to detect apx mode
hopefully whith a NVflash version for the tf300t we can recover it
Couple of days ago I opened up my TF and saw it was stuck on the bootup screen. Since then I have tried multiple times to format /system and do a factory restore in CWM and tried reflashing EOS JB and RaymanFX JB. Both times the TF boots so it shows the blue bar on boot sliding across to show it updated and then dies and reboots and gets stuck on the bootup screen. Is there a way to fix this?
And the loading screen I'm talking about is the one that says eee pad in cursive and "Powered by Nvidea Tegra" on the bottom.
Thanks.
did you flash kernal from RaymanFX
If you are ready flash kernal just go back CWR and selected "Boot recovery" in misc menu
waiting little bit long in the first time but it'll be login successful, it's my experience ^^
note: and flash google app too "gapp"
leonly1232 said:
did you flash kernal from RaymanFX
If you are ready flash kernal just go back CWR and selected "Boot recovery" in misc menu
waiting little bit long in the first time but it'll be login successful, it's my experience ^^
note: and flash google app too "gapp"
Click to expand...
Click to collapse
Isn't the kernel built into the ROM? I guess I will give that a try.
It is better to clean isntall.
Format /data etc.
then isntlal the rom
or download Super Wipe Full form ARHD: http://forum.xda-developers.com/showthread.php?t=1245892
good luck :]
Do not use super wipe...
Install twrp 2.2.1(recovery)
Use that recovery to wipe internal memory, cache, dalvik and everything else..
Now do a fresh installation of CM10 or eos jb... mind u cm10 gives better audio then eos and cm10 has kernel inbuilt which is better than eos kernel...
Sent from my Transformer using xda app-developers app
Basically wiped and formatted everything and downloading CM10 right now. Hopefully this will work.
Tablet has booted into CM and everything seems to be working again. Thanks guys!
Asus Transformer TF101 struck on start screen
Hi,
My Asus Transformer is struck at welcome screen, when I try to reboot with power and volume down buttons, it's saying rebooting but struck at the
following screen
OS will cold boot in 10 seconds if no input is detected
Press <VOL_Down> to change mode
Press <VOL_UP> to confirm mode ( when I press vol_up to confirm mode), I get the following message below
Platform pre OS boot configuration....
Cold-booting Linux
Any help is truly appreciated.
shrihan0 said:
Hi,
My Asus Transformer is struck at welcome screen, when I try to reboot with power and volume down buttons, it's saying rebooting but struck at the
following screen
OS will cold boot in 10 seconds if no input is detected
Press <VOL_Down> to change mode
Press <VOL_UP> to confirm mode ( when I press vol_up to confirm mode), I get the following message below
Platform pre OS boot configuration....
Cold-booting Linux
Any help is truly appreciated.
Click to expand...
Click to collapse
Welcome to the forum!
Are you rooted, or are you still stock?
If you are rooted, what recovery are you running?
If you are stock, I would try flashing the latest (.27) firmware for your version (SKU). Download from the Asus support site, unzip it ONCE (it will still be a zip) and put that on a microSD formatted for FAT32. Then hold VOL DOWN and POWER until you see the small white text. Release both buttons and hit VOL UP to enter RCK (recovery) to trigger the flash of the stock firmware.
I use CM10 nightly and CWM v6.0.1.0
Today I flash new version of CM10 nightly and everything's ok.
After that i try to change my wifi icon by ROM TOOLBOX PRO APP and it need restart
After restart, my device start bootloop.
I pull battery and use vol.up+power button start the device to bootloader screen
But in bootloader screen I can't use vol.up/down button to select recovery menu
(power button still work in bootloader screen)
please help me
sorry for my poor English
I just tried to installed the latest (M2) build and the latest Nightly for my tab. In both of them, the boot screen is stretched. After flashing the ROM, the first boot gets stuck! Only work if I reboot by keep pressing the power button. Is there a known issue? (My tab is p3113)
Try flashing this:
http://forum.xda-developers.com/showthread.php?t=2183830
Posted from my Fascinate using XDA Premium
Hi,
After enjoying a successful CyanogenMod install of the stable 10.1.3 I tried to update it with the Dec. 1 daily. I had planned to use TWRP recorvery to install it manually but after downloading it to the phone with the CyanogenMod update utility, it offered to install it automatically so I foolishly trusted it. Now I have an HTC One S in either a boot loop or displaying a fuzzy blue screen. I cannot get to TWRP recovery regardless of what buttons I hold down. Can anyone help?
joelalor said:
Hi,
After enjoying a successful CyanogenMod install of the stable 10.1.3 I tried to update it with the Dec. 1 daily. I had planned to use TWRP recorvery to install it manually but after downloading it to the phone with the CyanogenMod update utility, it offered to install it automatically so I foolishly trusted it. Now I have an HTC One S in either a boot loop or displaying a fuzzy blue screen. I cannot get to TWRP recovery regardless of what buttons I hold down. Can anyone help?
Click to expand...
Click to collapse
If you have this fuzzy blue screen, it means that you are on a wrong kernel. Since it's not possible to flash kernel through recovery when istalling the rom, you have to flash it manually.
So, boot into the bootloader and flash the correct kernel. Then it should work.
And how is it possible that you can't get to recovery? When you hold VOL down + POWER, you get to bootloader and from there you can access the recovery.
same here..
joelalor said:
Hi,
After enjoying a successful CyanogenMod install of the stable 10.1.3 I tried to update it with the Dec. 1 daily. I had planned to use TWRP recorvery to install it manually but after downloading it to the phone with the CyanogenMod update utility, it offered to install it automatically so I foolishly trusted it. Now I have an HTC One S in either a boot loop or displaying a fuzzy blue screen. I cannot get to TWRP recovery regardless of what buttons I hold down. Can anyone help?
Click to expand...
Click to collapse
I'm having the same problem, have you found a solution?
I can't evern get to bootload...
How is it possible that you can't get to bootloader? VOL down + Power should do it. Then, just navigate to bootloader and with USB connected to PC you can flash the kernel and there you go...
Thats what I thought too. But somehow, for the first day, no matter who tried it, bootloader wasn't possible. After trying several times I asked others, because there was no logical explanation to me, why it wouldn't work.
A day later, it worked, now I'm having some problems with the SD card, but I guess as soon as I have time this can be fixed too. Thanks for your help, though!
You're welcome