Database Info

[Q] Htc sensation xe with beats audio in a boot loop

Before you say anything i just want to state that i have been on my computer for over 4 hours trying to fix this issue but nothing seems to work. I have had my phone for a while now and while im not a complete noob at the tech with it i wouldnt say i have a very strong understanding either. So the phone was given to me by a friend, already rooted and i have had no promblems with it but today i tried to flash cyanogenmod(?) and well alot of things happened.
At first when i finished it just kept resetting so i did a bit of researched and i updated the firmware(without supercid) note that i only know that i was meant to use supercid after my phone went into a boot loop
So anyways long story short i cant use supercid because my phone is in a continous boot loop and it doesnt get recognised as a usb thingo when i plug it in so i cant do those commands i need to do for supercid
so urgent help is needed !!!

reading your post i assume you are S-OFF
what recovery do you have?
try 4ext recovery if you don't have it and reflash the rom

jiazu said:
Before you say anything i just want to state that i have been on my computer for over 4 hours trying to fix this issue but nothing seems to work. I have had my phone for a while now and while im not a complete noob at the tech with it i wouldnt say i have a very strong understanding either. So the phone was given to me by a friend, already rooted and i have had no promblems with it but today i tried to flash cyanogenmod(?) and well alot of things happened.
At first when i finished it just kept resetting so i did a bit of researched and i updated the firmware(without supercid) note that i only know that i was meant to use supercid after my phone went into a boot loop
So anyways long story short i cant use supercid because my phone is in a continous boot loop and it doesnt get recognised as a usb thingo when i plug it in so i cant do those commands i need to do for supercid
so urgent help is needed !!!
Click to expand...
Click to collapse
Hi,
Which firmware did you flash?
Supercid is not a necessity.
Use Kohr-Ah's Universal firmware ,and your CID should be incorporated in it.
If not,you can write it into the info.txt

i flashed the 3.3 universal then when everything went bad i tried to flash stock rom 3.33 or something :s

rzr86 said:
reading your post i assume you are S-OFF
what recovery do you have?
try 4ext recovery if you don't have it and reflash the rom
Click to expand...
Click to collapse
how would i go about doing this? like from what ive read, to use it i have to go through my phone. at the moment i cant get pass the logo when i turn my phone on

jiazu said:
i flashed the 3.3 universal then when everything went bad i tried to flash stock rom 3.33 or something :s
Click to expand...
Click to collapse
Hi,
Are you s-off?
Go to bootloader,and post what is written there.

malybru said:
Hi,
Are you s-off?
Go to bootloader,and post what is written there.
Click to expand...
Click to collapse
-firmware-3.33-
Pyramid PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.11.9007.27_M3
eMMC-boot
Jan 13 2012, 17:33:34

jiazu said:
-firmware-3.33-
Pyramid PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.11.9007.27_M3
eMMC-boot
Jan 13 2012, 17:33:34
Click to expand...
Click to collapse
Hi,
Your problem there is your radio.
Look HERE
Flash the 11.24A or 11.29A version.

malybru said:
Hi,
Your problem there is your radio.
Look HERE
Flash the 11.24A or 11.29A version.
Click to expand...
Click to collapse
my computer doesnt read my phone. its stuck on a booting loop

jiazu said:
my computer doesnt read my phone. its stuck on a booting loop
Click to expand...
Click to collapse
Hi,
Have you got ADB installed?
If not,look HERE
or re-install it.

malybru said:
Hi,
Your problem there is your radio.
Look HERE
Flash the 11.24A or 11.29A version.
Click to expand...
Click to collapse
i will try this, thanks ! but i still have to connect my phone via usb, am i meant to leave my phone on fastbook usb or what?
i notice it says make sure yusb debugging is on, i cant really change settings when i can get into my phone

jiazu said:
i will try this, thanks ! but i still have to connect my phone via usb, am i meant to leave my phone on fastbook usb or what?
i notice it says make sure yusb debugging is on, i cant really change settings when i can get into my phone
Click to expand...
Click to collapse
Hi,
OK.
Try to install the 3.32 Universal firmware,and see if that upgrades your radio.
Post back here with what your bootloader says after you tried it.

malybru said:
Hi,
OK.
Try to install the 3.32 Universal firmware,and see if that upgrades your radio.
Post back here with what your bootloader says after you tried it.
Click to expand...
Click to collapse
it says the CID is incorrect

jiazu said:
it says the CID is incorrect
Click to expand...
Click to collapse
Hi,
You have to edit the info.txt.
It is clearly explained in The Thread.

malybru said:
Hi,
You have to edit the info.txt.
It is clearly explained in The Thread.
Click to expand...
Click to collapse
so problem solved !!!11!!11! THANK YOU SO MUCH !!
but if i could trouble you if one more query...i would still like install the cynogenmod. this is what my bootloader is at right now:
-Firmware-3.32-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34
if it wouldnt trouble you, could you please list the steps i need to take in order to install cynogenmod so i dont screw up again

jiazu said:
so problem solved !!!11!!11! THANK YOU SO MUCH !!
but if i could trouble you if one more query...i would still like install the cynogenmod. this is what my bootloader is at right now:
-Firmware-3.32-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34
if it wouldnt trouble you, could you please list the steps i need to take in order to install cynogenmod so i dont screw up again
Click to expand...
Click to collapse
Hi,
Glad it worked.
Your radio is now good.
Place a Rom on the root of your sd card,go into recovery,wipe the phone clean.
If you have 4 EXT ,then,format all partitions except sd card.
Install ROM.

[Q] SORRY! Need help, Im stuck.

I know people really don't like it when questions are asked that they could of solved in like two minutes, But im really sorry guys Ive been doing everything in my power to fix this and I cant. Well when I rooted my Inspire 4g I thought it was rooted so I put TWRP on there and erased my stock (I forgot to save the backup) and installed a ROM, That Didn't start for like an hour so I turned it off and went to bed. I keep on trying things to get my ROM to work and to avail it stops. When I tried it again to install It installed again but when i rebooted I got the HTC Screen then fade to black, I honestly have been trying everything from fastboot, Trying to get programs to work, Trying to flash in RUU Trying to flash PD98IMG and Everything I could look on Google and Think of in my head...Nothing is working. i know you need a S-off to flash roms...but I cant find a way to turn it off because all I can access right now is recovery (Im not on Clockwork). SO I hate to ask...But can you guys help? D: Please, Im sorry, and Thank you.
Heres how my Hboot screen looks like:
*** RELOCKED**
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.10.04.03_M
eMMC-BOOT
Jan 4 2012, 13:09:29

You don't need S-Off to flash ROMs. You do need to re-unlock. Then, every time you flash a ROM, you need to fastboot flash the boot.img from the ROM zip.

bananagranola said:
You don't need S-Off to flash ROMs. You do need to re-unlock. Then, every time you flash a ROM, you need to fastboot flash the boot.img from the ROM zip.
Click to expand...
Click to collapse
I try unlocking it from fastboot and it wont let me. Is there another way?

bwilliy said:
I try unlocking it from fastboot and it wont let me. Is there another way?
Click to expand...
Click to collapse
What do you mean, "it won't let you?" What's the error?

bananagranola said:
What do you mean, "it won't let you?" What's the error?
Click to expand...
Click to collapse
Actully, I forgot about my unlock tolken...So I fixed all but flashing the boot...Thank you.

[Q] Boot-loop after flashing - Stuck at HTC screen - need help!

Hey guys, before I say something. I have really searched for help on the forum, although I clearly need help.
So I was trying to ROM the new Revelation rom and ended up in a bootloop where phone is restarting at HTC screen. I've flashed ROMs a several times with no problem whatsoever, until now.
I have 4Ext recovery and can access it without problems. Tried installing other ROMs as Cm10 with no luck.
At the time is says in bootloader.
Information about device
**** UNLOCKED ****
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Click to expand...
Click to collapse
ADB-information (when typing "adb getvar all")
version: 0.5
version-bootloader: 1.27.0000
version-baseband: N/A
version-cpld: None
version-microp: None
version-main: 3.33.401.6
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4012mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
----------------------------------------------.
I've tried installing the RUU 3.33.4, (which I believe is the right firmware for me, still nothing happens really, it loads in bootloader, nothing more).
Thank you very much for any help, I'd really appreciate it.
Links with similar problems
http://forum.xda-developers.com/showthread.php?t=1600324&highlight=bricked+sensation
http://forum.xda-developers.com/showthread.php?t=2271457

Folks, the surgery went well! I fixed it.
Was looking for every possible solution and found a guide! Finally got my lovely sensation back.
1. Put the firmware PG58IMG file in root (3.33.4 - since my fastboot told me so). Let it "flash".
2. Went inside 4Ext and removed the PG58IMG file.
2. Formated and wiped dalvik and cache.
3. With 4Ext smartflash turned on I flashed CM10.1 ROM.
4. Bootet back to bootloader in 4Ext, connected my device to adb and fastboot.
5. Copied the boot.img from the CM10.1 Rom-file and put it in the same folder as adb and fastboot.
6. Typed "fastboot flash boot boot.img", let it flash.
7. Reboot, phone back and feeling good!
Hope this helps for anyone who's stuck at HTC logo screen and has S-ON. Since the S-ON kind of prevented me from changing CID etc. I tried this, which worked successfully!

NickenA said:
Hey guys, before I say something. I have really searched for help on the forum, although I clearly need help.
So I was trying to ROM the new Revelation rom and ended up in a bootloop where phone is restarting at HTC screen. I've flashed ROMs a several times with no problem whatsoever, until now.
I have 4Ext recovery and can access it without problems. Tried installing other ROMs as Cm10 with no luck.
At the time is says in bootloader.
Information about device
ADB-information (when typing "adb getvar all")
----------------------------------------------.
I've tried installing the RUU 3.33.4, (which I believe is the right firmware for me, still nothing happens really, it loads in bootloader, nothing more).
Thank you very much for any help, I'd really appreciate it.
Links with similar problems
http://forum.xda-developers.com/showthread.php?t=1600324&highlight=bricked+sensation
http://forum.xda-developers.com/showthread.php?t=2271457
Click to expand...
Click to collapse
Even I had the same problem today.
http://forum.xda-developers.com/showthread.php?t=2349395
In short..the culprit was the boot.img.
It was not being flashed even after enabling smartflash in 4ext recovery.
So basically what I did was exract boot.img from the AndroidRevolution rom and flashed it via fastboot(fastboot flash boot boot.img).
And it worked!!
Try this and report.

@NickenA
You should probably remove your imei and serial number from OP.
Sent from my Ouya

You can still flash Revelation but since you are S-ON you may need to flash the boot.img separately like you posted in your solution. So, extract the boot.img from the ROM, flash the ROM then push boot.img to your phone afterwards, and before you know it you will be enjoying the smoothest Sensation possible!

I've been having the same problem, once again, after trying to flash Revelation (and yeah, I'm also 1.27 with S-ON) so this looks like it's definitely the common denominator. Even with SmartFlash in 4EXT, the boot.img doesn't seem to flash for any ROM after attempting to flash revelation - I even tried 3 others that I know used to work just fine. I was starting to get afraid that I may have softbricked my phone, but I'll go ahead and try flashing boot.img manually. Thanks
EDIT: Worked like a charm - only needed to do fastboot flash boot boot.img
The other method with the PG58IMG is going a little overboard, IMO

Jus flash the proper boot.img
NickenA said:
Folks, the surgery went well! I fixed it.
Was looking for every possible solution and found a guide! Finally got my lovely sensation back.
1. Put the firmware PG58IMG file in root (3.33.4 - since my fastboot told me so). Let it "flash".
2. Went inside 4Ext and removed the PG58IMG file.
2. Formated and wiped dalvik and cache.
3. With 4Ext smartflash turned on I flashed CM10.1 ROM.
4. Bootet back to bootloader in 4Ext, connected my device to adb and fastboot.
5. Copied the boot.img from the CM10.1 Rom-file and put it in the same folder as adb and fastboot.
6. Typed "fastboot flash boot boot.img", let it flash.
7. Reboot, phone back and feeling good!
Hope this helps for anyone who's stuck at HTC logo screen and has S-ON. Since the S-ON kind of prevented me from changing CID etc. I tried this, which worked successfully!
Click to expand...
Click to collapse
No need to wipe/flash anything.. Most boot-loops with S-ON occur with wrong boot.img. Just use fastboot flash boot boot.img and you should be good to go.

I have the same problem... :/ (Not sure if I have to start a new thread)
I have flashed the Revelation ROM and after rebooting I'm stuck at HTC splash screen. Now after restoring my backup of my previously used CM10.1 ROM I'm stuck on splash screen too. I even tried to flash a clean CM10.1 ROM, but same problem
I'm S-OFF using hboot 1.29 and latest firmware.

BobQuentok said:
I have the same problem... :/ (Not sure if I have to start a new thread)
I have flashed the Revelation ROM and after rebooting I'm stuck at HTC splash screen. Now after restoring my backup of my previously used CM10.1 ROM I'm stuck on splash screen too. I even tried to flash a clean CM10.1 ROM, but same problem
I'm S-OFF using hboot 1.29 and latest firmware.
Click to expand...
Click to collapse
flash the boot.img of the rom manually
from cmd window the command is fastboot flash boot boot.img

rzr86 said:
flash the boot.img of the rom manually
from cmd window use the dommand is fastboot flash boot boot.img
Click to expand...
Click to collapse
I tried that as well (have I to do this even if I am S-OFF?), but still bootloop.

BobQuentok said:
I tried that as well (have I to do this even if I am S-OFF?), but still bootloop.
Click to expand...
Click to collapse
do a full wipe first and then reflash the rom
what recovery are you using?

rzr86 said:
do a full wipe first and then reflash the rom
what recovery are you using?
Click to expand...
Click to collapse
Okay, I'll do full a full wipe, a reflash and then fastboot boot.img (again).
I use 4ext. Thanks for trying to help me

BobQuentok said:
I tried that as well (have I to do this even if I am S-OFF?), but still bootloop.
Click to expand...
Click to collapse
No need for this if you're s off. Do a full wipe except sdcard and reflash.
JAM THAT THANKS BUTTON.
Happy to help.

Far_SighT said:
No need for this if you're s off. Do a full wipe except sdcard and reflash.
JAM THAT THANKS BUTTON.
Happy to help.
Click to expand...
Click to collapse
It's really strange, I have never had that problem. I rewiped (except SD) and reflashed the ROMs many times, but still bootloop.
Even restoring my backup of my CM10.1 doesn't work :/
And fastboot doesn't work, because my bootloader is *** LOCKED ***

BobQuentok said:
It's really strange, I have never had that problem. I rewiped (except SD) and reflashed the ROMs many times, but still bootloop.
Even restoring my backup of my CM10.1 doesn't work :/
And fastboot doesn't work, because my bootloader is *** LOCKED ***
Click to expand...
Click to collapse
Try using a modded hboot. Also, post your bootloader details.
JAM THAT THANKS BUTTON.
Happy to help.

BobQuentok said:
It's really strange, I have never had that problem. I rewiped (except SD) and reflashed the ROMs many times, but still bootloop.
Even restoring my backup of my CM10.1 doesn't work :/
And fastboot doesn't work, because my bootloader is *** LOCKED ***
Click to expand...
Click to collapse
with locked bootloader you are restricted to fastboot commands
what to do is flash 3.33 universal from this thread
http://forum.xda-developers.com/showthread.php?t=1459767
it will give you also a patched hboot which is unlocked
follow the instructions carefully
and before flashing check md5 sums(important)
after that try with the command again

Far_SighT said:
Try using a modded hboot. Also, post your bootloader details.
JAM THAT THANKS BUTTON.
Happy to help.
Click to expand...
Click to collapse
Sorry, totally forgot about that
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-V05.6.0.2226.00.0418
eMMC-boot
Mar 2 2012, 18:14:34
Click to expand...
Click to collapse
I'm running latest hboot and FW from that thread: http://forum.xda-developers.com/showthread.php?t=1459767
Thanks for your help

BobQuentok said:
Sorry, totally forgot about that
I'm running latest hboot and FW from that thread: http://forum.xda-developers.com/showthread.php?t=1459767
Thanks for your help
Click to expand...
Click to collapse
are you sure fro that thread?
because you have the official hboot version
also it is locked
the patched hboot will say at the top firmware 3.33

rzr86 said:
are you sure fro that thread?
because you have the official hboot version
also it is locked
the patched hboot will say at the top firmware 3.33
Click to expand...
Click to collapse
Yeah, I'm pretty sure since this is my only source for FW/hboot files.
I'm reflashing 3.33 universal now. Which hboot should I flash? (since the one in the thread is, I guess, only an 1.27 > 1.29 update package)

BobQuentok said:
Yeah, I'm pretty sure since this is my only source for FW/hboot files.
I'm reflashing 3.33 universal now. Which hboot should I flash? (since the one in the thread is, I guess, only an 1.27 > 1.29 update package)
Click to expand...
Click to collapse
3.33 universal will take care too of the patched hboot
probably you will have 1.27.1111

[Q] SIM-Unlock my Sensation and flash with Kitkat

Hi
My Sensation phone:
=JuopunutBear=
Pyramid PVT SHIP S-OFF RL
HBoot - 1.27.1111
radio - 11.23.3504.07_M2
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34
I have manage to make my Sensation S-OFF but I have some problem to install Kitkat. It got stuck on the boot logo or loop boot. But that's not my biggest issue right now, I'm trying to get the phone simunlocked. I have tried the PG58DIAG.nbh file on boot but I only get Security fail! Update fail.
Do I have to downgrade the HBOOT to make the PG58DIAG to work?
I have spent alot of time to come this far with Unlocked S-OFF and SU. My brain feels like a mess. I hope someone can explain how I will do to get the phone sim unlocked and maybe explain why KitKat won't work on my phone (tried CM11 and Carbon- CM11-stuck on logo, Carbon-boot loop)

zexydiva said:
Hi
My Sensation phone:
=JuopunutBear=
Pyramid PVT SHIP S-OFF RL
HBoot - 1.27.1111
radio - 11.23.3504.07_M2
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34
I have manage to make my Sensation S-OFF but I have some problem to install Kitkat. It got stuck on the boot logo or loop boot. But that's not my biggest issue right now, I'm trying to get the phone simunlocked. I have tried the PG58DIAG.nbh file on boot but I only get Security fail! Update fail.
Do I have to downgrade the HBOOT to make the PG58DIAG to work?
I have spent alot of time to come this far with Unlocked S-OFF and SU. My brain feels like a mess. I hope someone can explain how I will do to get the phone sim unlocked and maybe explain why KitKat won't work on my phone (tried CM11 and Carbon- CM11-stuck on logo, Carbon-boot loop)
Click to expand...
Click to collapse
post #531
http://forum.xda-developers.com/showthread.php?t=1232107&page=54
about bootloop flash boot.img of the rom via fastboot command

rzr86 said:
post #531
http://forum.xda-developers.com/showthread.php?t=1232107&page=54
about bootloop flash boot.img of the rom via fastboot command
Click to expand...
Click to collapse
S-off, no need to flash boot.img, I think that TWRP is required fom KK.

nlooooo said:
S-off, no need to flash boot.img, I think that TWRP is required fom KK.
Click to expand...
Click to collapse
indeed it doesn't but it helped a lot of users
but as you said maybe it has to do with recovery:good:

rzr86 said:
indeed it doesn't but it helped a lot of users
but as you said maybe it has to do with recovery:good:
Click to expand...
Click to collapse
I don't use AOSP roms as I am Sense lover. However, as I can see most problems with KK roms flashing come because of recovery, cause, as I understood, KK neads some metadata bu****t that can only be achieved with TWRP.
If I'm right it won't be bad if someone could point that to everybody willing to test KK builds.

Thanks for your answers :good:
I managed to get my sensation sim unlocked. I changed my Super CID and used the PH58DIAG file without any problem.
Do I have to change back to my old cid or can I use 11111111 without any problems?
I will try some older ROMs and see... or I will try the TWRP and see if it helps
I'll be back

zexydiva said:
Thanks for your answers :good:
I managed to get my sensation sim unlocked. I changed my Super CID and used the PH58DIAG file without any problem.
Do I have to change back to my old cid or can I use 11111111 without any problems?
I will try some older ROMs and see... or I will try the TWRP and see if it helps
I'll be back
Click to expand...
Click to collapse
don't change cid to original
leave it as it is

rzr86 said:
don't change cid to original
leave it as it is
Click to expand...
Click to collapse
Thanks.
I got tired to try to flash it with kk. I flashed it with ViperS/C2 5.0.0 instead

After S-ON system won't boot to OS. Please Help!

Hi guys
I've looked everywhere for a solution. Maybe someone know another post that I might've missed.
My phone won't start, it keeps rebooting to the white HTC screen.
Right, now to the problem. Before this problem I had a custom ROM installed (Carbon 4.3) which was getting a few errors so I decided to restore it with clockworkmod from a previous backup. Now what this did is turned the device to ****Locked**** and S-ON .
So what I did next is use HTCDEV to unlock it. Well that bit worked but it's still S-ON.
Now it shows
------------------------------------------------
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Mar 2 2012, 18:14:34
-------------------------------------------------
I can still go in to Recovery and use the 4EXT recovery Touch (v1.0.0.4 RC3) and i managed to wipe everything including the SD as I already backed it up. After I installed a custom ROM (Blitz 4.0). Everything went well, finished installing successfully. After a reboot the phone won't start to the OS. It keeps looping to the White HTC screen (without even vibrating every time it reboots). So I can install any ROM but can't boot into it.
I even re-partitioned my SD thinking that the mSD was the issue but no luck.
Any particular advice how can I fix this?
Many thanks!

Go to recovery---> tools--->enable smart flash
And flash Rom it will work
OR
flash boot from Rom by fastboot command
fastboot flash boot boot.img
For kitkat Rom update 4ext recovery to latest o think its rc 6

Itsakash said:
Go to recovery---> tools--->enable smart flash
And flash Rom it will work
OR
flash boot from Rom by fastboot command
fastboot flash boot boot.img
For kitkat Rom update 4ext recovery to latest o think its rc 6
Click to expand...
Click to collapse
Hi and thanks for quick reply.
I've tried the first method (but no luck)
Although second one worked like a charm! :good: Thanks for that. Now my next question is: If I want to install another ROM will it make the same problem? If yes then how do I get the from S-ON to S-OFF? Will the Revolutionary Utility help ,me or mess it up?
Thanks again. :good:

mikutzu said:
Hi and thanks for quick reply.
I've tried the first method (but no luck)
Although second one worked like a charm! :good: Thanks for that. Now my next question is: If I want to install another ROM will it make the same problem? If yes then how do I get the from S-ON to S-OFF? Will the Revolutionary Utility help ,me or mess it up?
Thanks again. :good:
Click to expand...
Click to collapse
just to know enable smartflash exactly before flashing the rom
and yes you will have to do the same if smartflash fail again
if you want to S-OFF you have to flash stock rom first
then follow this guide
http://forum.xda-developers.com/showthread.php?t=1614617

rzr86 said:
just to know enable smartflash exactly before flashing the rom
and yes you will have to do the same if smartflash fail again
if you want to S-OFF you have to flash stock rom first
then follow this guide
http://forum.xda-developers.com/showthread.php?t=1614617
Click to expand...
Click to collapse
Thanks rzr86. Will think about it before I'll S-OFF. I'm happy that I got it working again. Plus I don't use it anymore. It's my wife's phone now. Just wanted to flash a new ROM and pass it on to her and that poo happened. :cyclops: Now it's back to life.
( Thanks again "Itsakash")