Is it possible in any way to transfer data via Wifi? I searched the forum and the only proposed solution was to setup an ftp server on the
PPC and connect to it from PC, but I couln't get this to work. I suspect it won't be very fast either. I need this because it's so hard to get the minisd out of my phone (Touch) and both ActiveSync and bluetooth file transfer are so slow. I think the only solution would be wifi, so is there any way?
I could have sworn that some of the free software that came with ap 3.0 allowed you to see shared folders on on other computers in the same network as you,
anyway I used z2software, it allows me to remote control my home computer from anywhere in the world and allows me to transfer files in both directions (quite quickly too) it works over 2G 3G and wifi with varying speed of course
www.z2software.com
I use Resco Explorer which enables you to map a "network drive". In essence it finds all the shared folders on your PC and let's you create a network map to them so you can copy to/from them thru Wifi. In terms of speed is a LOT faster than bluetooth and regular USB (ActiveSync), but a LOT slower than using a card reader.
with Total Commander (freeware) you can also connect to a share drive an copy data this way. also, you could use WM5Storage which will give you access to your memory card without using activesync (as if you placed your card in a card reader).
is your phone rooted?? if yes you could download the app named samba from playstore. it works
aydc said:
Is it possible in any way to transfer data via Wifi? I searched the forum and the only proposed solution was to setup an ftp server on the
PPC and connect to it from PC, but I couln't get this to work. I suspect it won't be very fast either. I need this because it's so hard to get the minisd out of my phone (Touch) and both ActiveSync and bluetooth file transfer are so slow. I think the only solution would be wifi, so is there any way?
Click to expand...
Click to collapse
you try using es file explorer , I use and feel it ok. many functions, functions to transfer files via wifi very good. Good luck !
So, I'm already getting tired of plugging into the USB every time I want to transfer file. Is there anyway to transfer file without using the hard wire? WLAN or bluetooth or any suggestion are welcome! Please show me how to do it though! (Because I tried and searched but can't figure it out!)
Thanks
The phone supports bluetooth FTP, which allows just what you're looking for, I would type up a description but im sitting on the floor typing on my phone.. so maybe someone else can But in a nutshell, pair the 2 devices, (both must support bluetooth ftp), set up a bluetooth ftp share on the phone thru the bluetooth settings app, connect to the phone over bt.
its notably slower than the usb2.0 transfer though.
bluetooth
beam file thru bluetooth from a laptop or pc. set your phone to discoverable under bluetooth settings and on your bluetooth enabled pc you should be able to right click a file and click on sent to... and bluetooth device should be an option. a new screen will show up where you can search for nearby bluetooth devices and the rest should be self explanatory, the default password should be 0000 unless you changed it. hope this helps. bluetooth is rather slow tho. i usually only use this method for small cab files. i use the usb cable or a sd card reader for bigger files.
Great! I finally figured it out. So I have to enable FTP on this phone. lol
Total Commander has a LAN plugin that'll allow you to access samba shares on other computers. should be much faster than transfers via bluetooth as it's done over wifi.
You can also use Activesync.
vexingv said:
Total Commander has a LAN plugin that'll allow you to access samba shares on other computers. should be much faster than transfers via bluetooth as it's done over wifi.
Click to expand...
Click to collapse
I can access shares on my computer without samba or Total Commander. I just use file explorer.
This is really easy-peasy.
All you have to do is connect your phone to your Wi-Fi network, and then go into the File Explorer.
Click Menu > Go To > Open Path > New Path...
In the dialog box, type in the path to the share on your PC (yes you need to share the location on your PC that you want your phone to be able to access), for instance;
\\mypc\sharename
Click OK
Now you will be able to browse the folders on your PC and transfer files to/from it to your heart's content, just like you were looking on your own phone's filesystem.
Happy file transferring! :O)
ur awesome!!!!
Need help
Jim,
I must be a bit thick. I have my network set up for file sharing, but when I followed your instructions, I get a Network Log On screen and I'm not sure what I need to enter. User name... Password.... Domain.... ????? I'm already logged on securely to my WiFi network, so I do not understand what I should be entering here.
Can someone help me out here?
Thanks very much.
Skydog said:
I have my network set up for file sharing, but when I followed your instructions, I get a Network Log On screen and I'm not sure what I need to enter. User name... Password.... Domain.... ????? I'm already logged on securely to my WiFi network, so I do not understand what I should be entering here.
Click to expand...
Click to collapse
Sounds like you need to enter your WINDOWS username/password to log in to your windows pc.
You may also need to create some shared folders on the windows pc if you have not already.
As mentioned, my network is already set up for sharing (among several systems) including specific drives and folders.
I already tried using my Windows username and password, without success, which is why I posted my question.
I'm still clueless.
I'd love to get this to work, but I'm not getting anywhere either.
I do have network shares set up.
I'm connected on wifi.
I go to file explorer->Menu->Open Path->New Path and put in \\Laptopt2310\test which is the computer I want to connect to and a shared folder on that computer.
I get a popup pointing to my wifi indicator saying cannot connect with current connection settings. To change your connection settings, tap Settings.
If I tap settings, it takes me to a connection set up where it says Verizon Wireless with some options under and My Work Network with some options under that.
The advanced tab has a box for select networks and I have Verizon Wireless in the Internet box and My Work Network in the private network box.
I don't want to touch anything there and screw things up.
It's almost like it's trying to do it over the phone's data connection and not wifi, but I did a quick speed test and at least the internet browser is definitely using the wifi connection.
Well, I figured out that I could also do this in resco and total commander.
Both of them connect fine on wifi. Not sure why file explorer doesn't, but I guess it doesn't really matter now.
What's the secret?
I also use Resco. Can you explain exactly what you did to make a successful connection?
Those of you still trying to use File Explorer, the username, password and domain should be your Windows username, Windows password and the name of your PC respectively.
If you don't get any joy using the PC name as the domain, or in the path dialogue, you can use the ip address instead - it may be that your network is having problems resolving names to ip addresses.
Trust me, it really does work, I've never had a problem using it at home on a perfectly bog-standard wi-fi network, with the shares on a Vista PC (it also worked with Windows 2000 before that).
Obviously, you have to be sure you're using your Wifi network and not GPRS / HSDPA.
Hope that helps!
Jim,
After some tinkering, I was successful in getting the Fuze on my network. What a great tip! Many, many thanks for sharing this with us.
No problem, happy to help.
I'm sure this is all in the manual somewhere ;O)
I can pair my phone with the computer through bluetooh, but in the bluetooth settings menu when i select my computer I only see 'Wireless Stereo' and 'Headset' as service. Is this because the laptop might not support bluetooth ftp? Its a new Lenovo T400 with built in bluetooth, I figure that should support it?
Any help is appreciated. Thanks
Don't bother with bluetooth, it's too much hassle, just use the File Manager over Wifi, it's far easier!
But what if I really do want to use bluetooth...?
When I view my bluetooth devices on the laptop I can click properties on my Touch Pro and see the following services: A2DP, Active Sync Bluetooth service, Dial-up networking, Headset audio gateway, Object Push (Obex)
On the phone I go Start->Settings->Connections->Bluetooth and then select my laptop that i'm tethered to and I only see Wireless Steroe, ActiveSync, and headset.
Am I missing drivers on one of the devices? It looks like its possible something wrong on the TP seeing how my vista laptop is listing obex as an option...
Any help is appreciated
This guide teaches you to reverse tether your Android phone via WiFi. That is, it allows you to use your Ethernet connection of PC on your Android phone. It is useful for those who do not have WiFi routers and data connection. So if you have unlimited data plan for your computer, why not share the connection with your phone?
I am not the developer of the files supplied
Requirements:-
1.Rooted Phone
2.Wifi enabled Laptop or PC
3.Root explorer or any other application which gives system access
4.File in the attachement
Procedure :-
Phone:
Download Wpa_supplicant.zip and extract "wpa_supplicant" from it, save it on your SD card.
Open Root Explorer, and grant it superuser access when asked for.
Navigate to system -> bin and long press on wpa_supplicant; Select copy, and paste the file into any folder on your SD card.
Now navigate to the file you downloaded, copy it in same way, and paste it back to system -> bin. Note, you might need to mount the system as R/W instead of R/O by pressing a button on the top just before pasting the file.
Reboot.
▬▬Ubuntu (Must work for other Linux Distros too)▬▬:
Open Network Connections
Goto Wireless tab, select add, and set the following:
SSID:
Mode: Ad hoc
Leave other things unchanged, and go to Ipv4 settings tab
Set method to Shared to other computers
Go to Wireless security tab and set Security to WEP 40/128 bit key and set key to a numeric password (or hexadecimal one).
Check the connect automatically box on top of the tabs and press Save.
Your Android phone must now detect this network, and you can establish the connection by using your security key.
▬▬Windows XP, Vista, 7▬▬
Download and Install Connectify from www . connectify.me/download-lite/
Start Connectify Hotspot by giving a name and password to your hotspot and selecting the Ethernet connection to share. Make sure the security type is WEP or Open.
Disable your firewall (Simply adding it to exceptions doesn't work for AVG at least)
Now your phone should be able to see the hotspot and establish the connection using the password set.
Known Issues :
1.Random disconnections (Very less frequency)
2.Disconnections due to screen lock / sleep on laptop
3.For me Security mode does not works
HIT THANKS IF IT WORKED
ENJOY
Download the file here :-
http://db.tt/FdAVwebJ
If someone want mirror then post
Using this method you can download everything
From apps on Play Store to Media hosting websites link
Post your Review
Reserved for Future Use
Things are more simpler than it seems to be.
I am going to share how I did it, in very simple way.
Things you will need :
PC with any wifi working (NEED NOT WIFI-DIRECT AT ALL
Any android mobile with hot-spot working. (Rooted for root directory)
ES-File manager (Free)
Main reason to write this tutorial is for broadband users of PC, not having wifi-direct card, and no use of any wireless router or LAN or any fancy device.
I will tell you my short story, I am a usb-modem user with 2g/3g net with very limited data connection. Also cant buy wifi routers just to put my mobile n PC on "same network" criterion. USB was a pain and also very limited to just SD-card, and no root access via USB. So I took this mess and did my all to settle it as I need rather than fancy drivers and devices.
Enough of spoilers, lets start :
Mobile side settings :
Install ES-File manager. Goto windows->default->check remote managerBack to Home-screen and swipe to remote manager page, It will say no connection detected (its ok)Click on turn on wifi to enter in wifi settings and start hot-spot (or you can do it first)It will show an ftp address like "ftp://197.0.0.1:3721/", NOTE IT DOWN
Pc side settings
Search for the just created Wifi-Hotspot and connect to itNow 2 ways to connect to mobile : 1. Open windows explorer, directly write the ftp address as it is and voila you see your mobiles directory there.
2. Open windows explorer->right click on my computer->Add a network location->Next->write the ftp address->(<give a name>)->finishBoom, it will show as network mapped folder, click on it goes to your mobile.
THINGS TO REMEMBER :
IF YOU NEED TO ACCESS THE ROOT FOLDER OF YOUR MOBILE, SET THE PATH IN REMOTE MANAGER'S SETTING OPTION (SET ROOT DIRECTORY)
Any problem you tell me.
Sorry for my English.
Greetings to all. I would like to know if via VirtualXposed (the quest 1 is not rooted) you can use a module such as Fake Wifi (or another one that I ask you to suggest) that allows you to make an app (in my case Pigasus a video player that I use in oculus quest 1 that uses android 7) think it is connected to wifi. I ask this because I want to use this app via shared connection from PC via usb cable using the app gnirehtet (reverse tethering over adb) to make it access shared folders on my pc. But when I activate gnirehtet, although the browsers normally use the connection provided by pc via gnirehtet in Pigasus I get the message "no connection". I assume therefore that Pigasus tests the wifi connection to work, however even if I in addition to gnirehtet activate wifi in the quest and it connects to the network in Pigasus I always get the message "no connection" and therefore no access to the shared folders. If instead before activating gnirehtet I activate wifi in quest 1 I open Pigasus and access the shared folders, the moment I then activate gnirehtet the Pigasus app crashes and closes. I do all this to avoid using wifi for Piugasus because using wifi with Quest after a while causes me headaches. I also want to avoid using the Oculus link because after a while using Oculus link and skybox VR to watch my videos, hosted in the shared folders of the PC, I start to see freez to the images, regardless of the settings made to the oculus server like giving it priority over the other pc processes, so the best solution for me is this via Usb-c. Too bad there is no usb-c to ethernet support possible. Thanks in advance to those who will answer me also by giving me suggestions.