Database Info

Was handed down an Inspire. Wifi is broken, how do I repair it?

Hey guys, I'm new to the Inspire sub-forum.
I was handed down this phone by a friend of mine, (phone only. no box) and it is a bit banged up. Enough so the wifi hardware is failing. (I'm assuming so because it doesn't work.) My question is, how do I go about repairing it? Should I take it to an AT&T store? Also, I have not yet rooted it.
Thanks in advance!

Try to reflash the stock ROM. Look for RUU in the inspire 4g forums.
Or, you can call HTC and see what they say. They might be able to do a warranty swap. Not sure if it'll work since you are not the original owner. Worth a shot though.
Edite: Here you go. http://zantekk.de/~desire_hd/offici...60.19_26.06.04.06_M_release_166557_signed.exe

kirk123 said:
Try to reflash the stock ROM. Look for RUU in the inspire 4g forums.
Or, you can call HTC and see what they say. They might be able to do a warranty swap. Not sure if it'll work since you are not the original owner. Worth a shot though.
Edite: Here you go. http://zantekk.de/~desire_hd/offici...60.19_26.06.04.06_M_release_166557_signed.exe
Click to expand...
Click to collapse
Thanks Kirk! Although flashing the stock ROM didn't fix it I appreciate your help. I will try calling HTC and hope for the best.

Is the battery cover damaged or broken in anyway? WiFi connector is bridged or built in to the battery cover as an external antenna I think ..
Whenever I removed the cover I get no WiFi..and you can see some gold colored contacts
sent from my desired inspire 4G HD

jadeus0831 said:
Is the battery cover damaged or broken in anyway? WiFi connector is bridged or built in to the battery cover as an external antenna I think ..
Whenever I removed the cover I get no WiFi..and you can see some gold colored contacts
sent from my desired inspire 4G HD
Click to expand...
Click to collapse
There is some damage there actually. My volume rocker won't toggle down only up, but I can't really see any physical damage. Any ideas for a fix or am I SOL? D:
I'll post pics in a sec, camera is charging.

zer0nine said:
There is some damage there actually. My volume rocker won't toggle down only up, but I can't really see any physical damage. Any ideas for a fix or am I SOL? D:
I'll post pics in a sec, camera is charging.
Click to expand...
Click to collapse
Try connecting to a WiFi router when they are as close to each other as possible.
Sent from my typewriter

kirk123 said:
Try connecting to a WiFi router when they are as close to each other as possible.
Sent from my typewriter
Click to expand...
Click to collapse
It will not let me. A box pops up and says "Unable to scan for networks"
By the way I really appreciate you guys helping me out!
Edit: I should mention WiFi automatically turns itself off after it says "Unable to scan for networks"

Try bridging those connectors with a piece of coppee or a paper clip. See if it changes.
Sent from my A500 using XDA Premium App

zer0nine said:
It will not let me. A box pops up and says "Unable to scan for networks"
By the way I really appreciate you guys helping me out!
Click to expand...
Click to collapse
Then that might be serious internal problem that might require taking the phone apart to see whats broken.
Also, HTC will not honor the warranty cause of the fact that theres physical damage.

kirk123 said:
Then that might be serious internal problem that might require taking the phone apart to see whats broken.
Also, HTC will not honor the warranty cause of the fact that theres physical damage.
Click to expand...
Click to collapse
Considering the phone will not have warranty, I probably will take it apart later and find out what's going on.
Also, it's time to root and flash a ROM.

zer0nine said:
Considering the phone will not have warranty, I probably will take it apart later and find out what's going on.
Also, it's time to root and flash a ROM.
Click to expand...
Click to collapse
This might come in handy if you decide to take it apart.
http://www.youtube.com/watch?v=JfatoeWbMRk&feature=related

kirk123 said:
This might come in handy if you decide to take it apart.
http://www.youtube.com/watch?v=JfatoeWbMRk&feature=related
Click to expand...
Click to collapse
Thank you, now I just need the tools!
Also, I managed to connect to my router some how.. perhaps that smack I gave the phone did the trick
There is still an issue though. I just ran speed test and am getting low speeds so I'm not 100% sure it's using my WiFi connection. I'm not familiar with sense at all so can you tell me if data connection in the notification bar disappears when WiFi is connected?

zer0nine said:
Thank you, now I just need the tools!
Also, I managed to connect to my router some how.. perhaps that smack I gave the phone did the trick
There is still an issue though. I just ran speed test and am getting low speeds so I'm not 100% sure it's using my WiFi connection. I'm not familiar with sense at all so can you tell me if data connection in the notification bar disappears when WiFi is connected?
Click to expand...
Click to collapse
The wifi indicator on the Inspire looks very similar to the iphone wifi indicator.
Look to the left of the cell signal http://img841.imageshack.us/f/device22.png/

zer0nine said:
Thank you, now I just need the tools!
Also, I managed to connect to my router some how.. perhaps that smack I gave the phone did the trick
There is still an issue though. I just ran speed test and am getting low speeds so I'm not 100% sure it's using my WiFi connection. I'm not familiar with sense at all so can you tell me if data connection in the notification bar disappears when WiFi is connected?
Click to expand...
Click to collapse
Easy enough, turn on airplane mode then turn wifi on. Let it connect and then try to browse the internet. That will 100% tell you if the phone is using wifi and not the cell signal.

Mustang302LX said:
Easy enough, turn on airplane mode then turn wifi on. Let it connect and then try to browse the internet. That will 100% tell you if the phone is using wifi and not the cell signal.
Click to expand...
Click to collapse
Derp why didn't I think of that!
kirk123 said:
The wifi indicator on the Inspire looks very similar to the iphone wifi indicator.
Look to the left of the cell signal http://img841.imageshack.us/f/device22.png/
Click to expand...
Click to collapse
Ah ha! I see now. And surprisingly my WiFi is now working 100% right now and I am very happy! Thank you guys again for the help! Now I'm just paranoid about every little bump that might disable my WiFi somehow

This could just be extra precaution/I'm not sure if HTC would help you out, but you could ask for another battery cover. I hear on these forums that you can get replacements pretty easily...

Possible ROgers Port

EDIT:: check out this post for a working Rogers Port :: EDIT
http://forum.xda-developers.com/showthread.php?t=1567817

ckck543 said:
Im flashing now jsee how it goes
http://forum.xda-developers.com/showthread.php?t=1566811
Click to expand...
Click to collapse
nothing works on it dude

It boots but like he said nothing works. No data nothing. So you can swipe screens. I also thought by flashing that and then flashing the At&t zip after that it might work. Hells Nope! Us canadians are shafted

There is a working rogers cwm flashable ics, though. a few of us have it, but im on att and cant say what all works and what doesnt. They have told me most stuff is working, though

xcrazydx said:
There is a working rogers cwm flashable ics, though. a few of us have it, but im on att and cant say what all works and what doesnt. They have told me most stuff is working, though
Click to expand...
Click to collapse
Do you have a link?

Yaaaa I tried it nadda
Sent from my cellular telephone

pixelens said:
Do you have a link?
Click to expand...
Click to collapse
Here it is
http://www.4shared.com/zip/6lRlUQuy/file.html?'

xcrazydx said:
Here it is
http://www.4shared.com/zip/6lRlUQuy/file.html?'
Click to expand...
Click to collapse
Is there a thread that goes with this? Or where did this one come about? Assuming this isn't RaverX3X's T989 rom?

ckck543 said:
Yaaaa I tried it nadda
Sent from my cellular telephone
Click to expand...
Click to collapse
So... I'm really confused now.
Multiple searches, and reading tons of this forum on a daily basis for several months now had led me to the conclusion that the i727 and i727R are identical hardware... how is it possible that this isn't working on Rogers? Could it be something as silly as an environment variable set differently somewhere?
Looking forward to seeing a post that somebody cracks this puzzler soon. As far as I can tell all of the ATT and Rogers ROMS up to now were interchangable...
Have I misunderstood, or are these phones not physically (chipset, hardware...) identical?
Jamie

robinsonj said:
So... I'm really confused now.
Multiple searches, and reading tons of this forum on a daily basis for several months now had led me to the conclusion that the i727 and i727R are identical hardware... how is it possible that this isn't working on Rogers? Could it be something as silly as an environment variable set differently somewhere?
Looking forward to seeing a post that somebody cracks this puzzler soon. As far as I can tell all of the ATT and Rogers ROMS up to now were interchangable...
Have I misunderstood, or are these phones not physically (chipset, hardware...) identical?
Jamie
Click to expand...
Click to collapse
same phone same hw but that leak was built with an ics baseband that rogers lacks in short rogers users are missing a piece of software
Sent from my SAMSUNG-SGH-I727 using Tapatalk

robinsonj said:
So... I'm really confused now.
Multiple searches, and reading tons of this forum on a daily basis for several months now had led me to the conclusion that the i727 and i727R are identical hardware... how is it possible that this isn't working on Rogers? Could it be something as silly as an environment variable set differently somewhere?
Looking forward to seeing a post that somebody cracks this puzzler soon. As far as I can tell all of the ATT and Rogers ROMS up to now were interchangable...
Have I misunderstood, or are these phones not physically (chipset, hardware...) identical?
Jamie
Click to expand...
Click to collapse
They are as identical as two phone with different branding can be. The software is different and that leak is very AT&T specific. So there's something in there that screws up the R. If you take it south and run an AT&T SIM I'll bet it works just fine. The good news is that it is software so someone will find it and make a more generic version. Besides, I'm here to *not* run a stock ROM so I'm staying far away until it settles down and the devs have dived in.

xcrazydx said:
Here it is
Click to expand...
Click to collapse
Alright, beautiful. this works on my Rogers i727R. Just I have the home button issue. I'll look over the phone to see what else is working and not working over the next few hours while I'm in class.
Thanks!
Edit:
1) Receiving errors when trying to download apps on the market.
2) Trying to fix the home button. It works on start up on the homescreen, but once an app opens it stops working.

both known issues with fixes. (the main at&t threads talk about his)
Factory reset until home issue goes away
clear data/force stop to download apps.

joshuaauger said:
Here's how I fixed that. I ran dark side super wipe before install then install, run wipe data factory/ reset, wipe dalvik, fix permissions. (Overkill but hey just in case). After, when first boot comes up and the AT&T setup shows, click cancel then next. RIGHT when that's done pull the battery, before any apps install. Start back up and was fine, no home button issue but still no working reboot menu.
Anyways might work for others.
Click to expand...
Click to collapse
I'm going to try that. Any idea about Market error -101?
Edit:
That did it. Thanks.

Frnicatr said:
I'm going to try that. Any idea about Market error -101?
Click to expand...
Click to collapse
I had that same error on my skyrocket but it fixed after i did a factory reset and the market updated to the play store.

I figured that was the problem, but my market won't update. Anything I can do to force it to update to Play Store?

Frnicatr said:
I figured that was the problem, but my market won't update. Anything I can do to force it to update to Play Store?
Click to expand...
Click to collapse
a while back i had the problem where it wouldn't update so i just had my girlfriend send the Play Store apk to me from her skyrocket with an app sharer and that caused it to work

eventually it will. automatically maybe try clearing data as previously mentioned but then do a soft reset?

y2whisper said:
eventually it will. automatically maybe try clearing data as previously mentioned but then do a soft reset?
Click to expand...
Click to collapse
Yup. It eventually did randomly.
Last problem I'm encountering is I seem to be stuck on 4G and unable to get LTE, unless the icon at the top is having trouble.

Frnicatr said:
Alright, beautiful. this works on my Rogers i727R. Just I have the home button issue. I'll look over the phone to see what else is working and not working over the next few hours while I'm in class.
Thanks!
Edit:
1) Receiving errors when trying to download apps on the market.
2) Trying to fix the home button. It works on start up on the homescreen, but once an app opens it stops working.
Click to expand...
Click to collapse
Nice! Does this update the modem & baseband as well? Can you post a screen of your About Phone settings?

ICS Webtop

Well I plugged in my HDMI cable to see what would happen after and it presented me with a chooser than included Webtop! I tapped it and boom... no ubuntu, but a tablet view. Anyone have a lapdock to see if this is the new webtop for sure?

voodoomurphy said:
Well I plugged in my HDMI cable to see what would happen after and it presented me with a chooser than included Webtop! I tapped it and boom... no ubuntu, but a tablet view. Anyone have a lapdock to see if this is the new webtop for sure?
Click to expand...
Click to collapse
Nope ubuntu is now gone... I am planning a new hack to bring ubuntu back, I still have the old webtop files and all the scripts that make it run... so that is in the works.

jimbridgman said:
Nope ubuntu is now gone... I am planning a new hack to bring ubuntu back, I still have the old webtop files and all the scripts that make it run... so that is in the works.
Click to expand...
Click to collapse
Awesome man, thank you. I like the tablet view but would MUCH prefer Ubuntu

Yeah, this is the new "webtop" its 3.0. Droid razr users have the same thing, I doNT have a lap dock to test this, but I've been super curious as to if there would be any webtop without the actual dock connectors. Thank you for confirming this though!
Sent from my Transformer TF101 using Tapatalk 2

I would like the choice to do both. It would seem to me that if they are just doing tablet view, then the old webtop partition would be unused. I would like the choice to do tablet view or "old" webtop.

jimbridgman said:
Nope ubuntu is now gone... I am planning a new hack to bring ubuntu back, I still have the old webtop files and all the scripts that make it run... so that is in the works.
Click to expand...
Click to collapse
Awesome. I don't like the "webtab" on my lapdock. It will be great to see the ubuntu back.

Awesome, Waiting for your great work!

qtqt710 said:
Awesome. I don't like the "webtab" on my lapdock. It will be great to see the ubuntu back.
Click to expand...
Click to collapse
Now that the thread is resurrected, ill say this, the only huge advancement for the new webtop is that all multilang key assignments there are on android, work for the lapdocks hw layout, where as for ubuntu, there were only a couple of choices.

voodoomurphy said:
Well I plugged in my HDMI cable to see what would happen after and it presented me with a chooser than included Webtop! I tapped it and boom... no ubuntu, but a tablet view. Anyone have a lapdock to see if this is the new webtop for sure?
Click to expand...
Click to collapse
Total noob here with a good sense of adventure :cyclops: I have the lapdock (modified so i can dock my A2) and been using it for the pass three days running ICS! Comparing it to the old webtop this one is much easier to use and faster, youtube and netflix run smoothly,everything worsk well while on wifi and using my bluetooth headset also the tether works as well after i did the mod :good:
I want to thank jimbridgman and everyone else who i cant think of right now that has made this possible.

Some launchers can not display correctly in the new webtop 3.0.0.
And HDMI mirror mode can not be used in portrait.

Webtop 2 vs 3
voodoomurphy said:
Well I plugged in my HDMI cable to see what would happen after and it presented me with a chooser than included Webtop! I tapped it and boom... no ubuntu, but a tablet view. Anyone have a lapdock to see if this is the new webtop for sure?
Click to expand...
Click to collapse
I have compared two of them side by side. There is no true netbook/desktop experience in webtop 3. there is no firefox. Even if you view desktop sites on ICS chrome, they look crappy, the resolution is suboptimal. Webtop 2 had google docs and citrix support (that was awesome, I could do my office work and make presentations), Webtop 3 doesnt. I have lapdock 500 and ICS on 14 inch screen doesnt look pretty. It looks overstretched. It cant utilize the full resolution of lapdock 500s screen.

PhoenixNghi said:
Some launchers can not display correctly in the new webtop 3.0.0.
And HDMI mirror mode can not be used in portrait.
Click to expand...
Click to collapse
this is true, its much better to use stock ics launcher in SCV7 too. you can find it in the leaks .zip along with the configurator apk

HOW on earth is anyone managing to get Webtop mode to even engage on the Atrix 2 running ICS?? I plug mine into the Lapdock 500 and it just automatically goes straight into landscape mirror mode, every single time, NEVER Webtop/tablet mode ever!! It gives me no choice at all ever, it just mirros the phone's landscape display with the notification bar still at the top, not at the bottom as it should be in tablet mode. I am running the first/original ICS leak pure, but have also tried custom ROMs such as ScV7. Same result every time.
What am I doing wrong??

paleozord said:
HOW on earth is anyone managing to get Webtop mode to even engage on the Atrix 2 running ICS?? I plug mine into the Lapdock 500 and it just automatically goes straight into landscape mirror mode, every single time, NEVER Webtop/tablet mode ever!! It gives me no choice at all ever, it just mirros the phone's landscape display with the notification bar still at the top, not at the bottom as it should be in tablet mode. I am running the first/original ICS leak pure, but have also tried custom ROMs such as ScV7. Same result every time.
What am I doing wrong??
Click to expand...
Click to collapse
I just plugged the hdmi cable in and the menu popped up.
Sent from my MB865 using Webtop

dk-v1 said:
I just plugged the hdmi cable in and the menu popped up.
Sent from my MB865 using Webtop
Click to expand...
Click to collapse
Me too.

troycarpenter said:
Me too.
Click to expand...
Click to collapse
I have gotten it to work now as well after disabling the "Entitlement Check" nonsense that was preventing webtop from activating correctly. Now I have another problem though, in that the mouse pointer/cursor is a gigantic white arrow that takes up a lot of space on screen.. Under the original pure ICS leak it was a regular small/normal pointer, but under the latest ScV7 ROM it's enormous. I'm wondering whether any of the wizards here know how to replace this with a more usable pointer arrow..?

paleozord said:
I have gotten it to work now as well after disabling the "Entitlement Check" nonsense that was preventing webtop from activating correctly. Now I have another problem though, in that the mouse pointer/cursor is a gigantic white arrow that takes up a lot of space on screen.. Under the original pure ICS leak it was a regular small/normal pointer, but under the latest ScV7 ROM it's enormous. I'm wondering whether any of the wizards here know how to replace this with a more usable pointer arrow..?
Click to expand...
Click to collapse
you have probably firuged that out by the time i write this, but when your phone is booted up while connected to the dock, the mouse will be a big android icon... just unconnect and connect the phone, it will be fine.

souljaboy said:
you have probably firuged that out by the time i write this, but when your phone is booted up while connected to the dock, the mouse will be a big android icon... just unconnect and connect the phone, it will be fine.
Click to expand...
Click to collapse
Actually, under the ScV7 ROM I was finding that every other time I'd connect the phone to the lapdock, even already fully on and booted, I'd get the gigantic white mouse pointer. It would alternate between that and the proper smaller black one, each time I disconnected and reconnected. Perhaps I did something wrong during flashing/setup and it isn't the fault of the ROM. However on stock original first leak it always works correctly, and on the near-stock second leak ROM it also seems to be okay.

I could not play a movie but got the doc running. Even tried just mirroring. Any suggestions. This is first time trying the hdmi from atrix2 so be gentle
Sent from my MB865 using xda premium

tnayrbj said:
I could not play a movie but got the doc running. Even tried just mirroring. Any suggestions. This is first time trying the hdmi from atrix2 so be gentle
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
i dont know whats wrong, what happens when you connect ?

The bluetooth problem:

Could anyone who understands the inner workings of the CM and chopsticks crews shed some light on the bug resolution process.
I'm particularly interested in the bluetooth audio problems when making or receiving a call on the cars BT system. Seems it's wide spread and discussed on many threads but I've never seen it mentioned outside of forums like XDA and other Android user forums. Do you think it is on their list? Can someone post a link to a bug reporting site. I have bugzilla but I think thats for the AOKP roms .

Nobody?
Sent from my SAMSUNG-SGH-I727 using xda premium

stoopendis said:
Nobody?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Someone correct me if im wrong but isnt BT kernel related??? If so BT wont be stable until samsung releases a JB kernel for our phone
Sent from my SGH-I727 using xda app-developers app

Bluetooth
I also use the Bluetooth in my car and would like for someone to post any way on how to fix it. I'm using orthus 3 ROM works great.

skyrocke8 said:
I also use the Bluetooth in my car and would like for someone to post any way on how to fix it. I'm using orthus 3 ROM works great.
Click to expand...
Click to collapse
If there was a fix it would be widely known already. From what roger_n posted in the Paranoid Android thread (I think it was that one) the issue is in audio routing, not BT audio, and needs to be fixed by a core CM dev, as it's not skyrocket specific.

rpr69 said:
If there was a fix it would be widely known already. From what roger_n posted in the Paranoid Android thread (I think it was that one) the issue is in audio routing, not BT audio, and needs to be fixed by a core CM dev, as it's not skyrocket specific.
Click to expand...
Click to collapse
So the fact that it's been around so long is because these core CM devs are super busy..or are they even aware there IS a problem, or is it just low pri.

I can't speak for the devs, but I do believe it's a time issue, not that they don't know about it.

rpr69 said:
I can't speak for the devs, but I do believe it's a time issue, not that they don't know about it.
Click to expand...
Click to collapse
Well here's hoping they find the solution soon. I'm a little concerned about a work-around I've heard about where you turn off the blue tooth and then back on after the initial connection....Very dangerous while driving. And costly too. Here In B.C. there's a $175 fine for fiddling with your cell phone while driving.

stoopendis said:
So the fact that it's been around so long is because these core CM devs are super busy..or are they even aware there IS a problem, or is it just low pri.
Click to expand...
Click to collapse
Most likely a low priority, as there is not a Samsung released JB rom for the Skyrocket.
stoopendis said:
Well here's hoping they find the solution soon. I'm a little concerned about a work-around I've heard about where you turn off the blue tooth and then back on after the initial connection....Very dangerous while driving. And costly too. Here In B.C. there's a $175 fine for fiddling with your cell phone while driving.
Click to expand...
Click to collapse
I know it's lame, but what I ended up having to do in this issue was to even before I moved out of park I would disconnect and reconnect my BT. Often times though I found that just switching off the car radio (BT enabled Parrot Rythm-N-Blu), remove the face plate, count to 15 and put the face plate back on then turn the radio back on would do the "trick."

MasterDecker said:
Most likely a low priority, as there is not a Samsung released JB rom for the Skyrocket.
I know it's lame, but what I ended up having to do in this issue was to even before I moved out of park I would disconnect and reconnect my BT. Often times though I found that just switching off the car radio (BT enabled Parrot Rythm-N-Blu), remove the face plate, count to 15 and put the face plate back on then turn the radio back on would do the "trick."
Click to expand...
Click to collapse
I can pull down the menu and toggle BT easier than I can dial a number while driving...and yes, Ontario has the same fines.

aii for the last time just use a different rom. im using JB official by CM9 for skyrocket - stable version 2.
it's no cm10 but full BT car audio talk the works!!! it works, end of story cm9 SOLD!!!

Try the new official nightly
Sent from my SGH-I727 using xda app-developers app

AOK now. Perhaps we can have this thread shut down.
Sent from my SAMSUNG-SGH-I727 using xda premium

There's already similar posts on this. CM10 doesn't have the fix yet, if you want a working BT grab the official CM9 stable version - I've reverted back to as I have the same issue as you ie: car BT is a big deal for me.

charbar85 said:
There's already similar posts on this. CM10 doesn't have the fix yet, if you want a working BT grab the official CM9 stable version - I've reverted back to as I have the same issue as you ie: car BT is a big deal for me.
Click to expand...
Click to collapse
Fixed in CM10 as of last Wednesday.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[Q] [E] [CM10] Bluetooth stops working after some time

Hey. I've got this problem with Bluetooth, where it just stops responding after a while. Suppose I just enabled Bluetooth (first time for this boot). Bluetooth will work for a while, but after some time (an hour or so?), it just stops working. It stops detecting new devices, devices already connected stop working, and disabling Bluetooth and trying to re-enable it gets stuck on "Turning on Bluetooth..." It's fixed after a reboot, but stops working again some time after enabling. This is pretty bad, since I use my Wiimote for gaming.
Can anybody reproduce this, and can anybody help? I don't think it matters, but the game I'm playing is Beach Buggy Blitz, and the Wiimote app I'm using is Wiimote Controller by C.C.P. [email protected] Thanks.

Bump; nobody? Oh, come on!

Hey,
Sorry for the late reply. I must have overlooked it :silly:
Now: my Bluetooth problem is even worse. It does connect with devices(and it stays till I turn it oof), but it refuses to transport data! I noticed when I wanted to use my dockstation. My friend was there, and I wanted to play some music with loud boxes. It started connecting, and said: ''connected''. But it refused to play music. My Phone would vibrate and say: 'can't play audio''.
I tried to connect with my firends Samsung Galxy SIII. Again, it would connect, but it didn't transfer data. I tried with my mom her phone, but no. No data transfer.
So yeah. I'm stuck here. In stock, bluetooth works fine, but on CM10 not. Count in the baseband and battery bug, and I'm losing my interest in this ROM! Let's hope CM11 will fix all of this. I have no solution whatsoever, and allthough my problem differs a bit, I also have a bluetooth problem!
Have a nice day.

MatsPunt said:
So yeah. I'm stuck here. In stock, bluetooth works fine, but on CM10 not. Count in the baseband and battery bug, and I'm losing my interest in this ROM! Let's hope CM11 will fix all of this. I have no solution whatsoever, and allthough my problem differs a bit, I also have a bluetooth problem!
Click to expand...
Click to collapse
Guess nobody tried Bluetooth when they said only video recording is bad, right?
I would switch to stock, as soon as I can make GravityBox to work on it. Till then... CM10 it is.

NSDCars5 said:
Guess nobody tried Bluetooth when they said only video recording is bad, right?
I would switch to stock, as soon as I can make GravityBox to work on it. Till then... CM10 it is.
Click to expand...
Click to collapse
Yeah, I can live without Bluetooth, but it can be very annoying. And yes, I would describe Bluetooth failure as a large bug...
Have a nice day.
Sent from my Xperia E using XDA Premium 4 mobile app

Why don't you just logcat it to find what the problem is?

NSDCars5 said:
Guess nobody tried Bluetooth when they said only video recording is bad, right?
I would switch to stock, as soon as I can make GravityBox to work on it. Till then... CM10 it is.
Click to expand...
Click to collapse
If you built a rom how long would you test BT and on how many devices before you claimed it worked?
Get with the program for gods sake!

CtrlAltDelIrl said:
If you built a rom how long would you test BT and on how many devices before you claimed it worked?
Click to expand...
Click to collapse
...Good point.
What do you mean by this?
CtrlAltDelIrl said:
Get with the program for gods sake!
Click to expand...
Click to collapse

NSDCars5 said:
What do you mean by this?
Click to expand...
Click to collapse
I guess he means the logcat.
Have a nice day!
Sent from my Xperia E using XDA Premium 4 mobile app