Related
Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)
pommie said:
Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)
Click to expand...
Click to collapse
Hi,
The answers you seek are in the WIKI.
Hold the backlight + power button whilst resetting the device. This will put you back into bootloader mode, you can then reflash the Rom.
I would also advise that you SuperCid your device before flashing any Roms, if you haven't done so already.
Again this is documented in the Wiki.
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Cheers,
Beasty
my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.
pommie said:
my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.
Click to expand...
Click to collapse
The problem is Vista!
Search the forum and you will find a post with a fix (old drivers) for Vista, or just use a Windows XP or previoous MS OS to flash your device.
I would suggest XP if you plan to keep flashing in the near future
do i need to super cid my htc universal in order to upgrade to ranju v77. my universal is branded dopod 900 and can use with any simcard. thanks
lucky for me, i also got a pc with xp sp2 but my pda works with ranju v77 thnx man.
only from nokia phones i can't send file with bluetooth, phones like samsung works fine
My Dear Samaritans,
IMPORTANT:
- My SD/Memory card is removed
- My Sim card is removed
I was upgrading to Tomal v8.9 on a vista 64 system via a virtual machine XP SP2. Update failed and I got stuck in bootloader.
Tried reflashing but got an error and the flash failed... also the program crashed during recovery.
Tried using v8.71 still crashed without any luck.
Moved to a pure XP SP3 desktop...
When I connect the device to the computer(s) "Serial" changes to "USB" but XP sees it as an unrecognized device.
Tried flashing again but same error as on the virtual machine.
Tried mtty (1.16 & 1.42) but neither give me the option of USB, only COM1 and COM2. And had already de-activated the USB connection in Activesync.
Have read through the forum but have had no luck. Everyone's issue is resolved as soon as they remove their SD or SIM, but I have neither and am also using XP with activesync's USB disabled.
Tried UNI_ExitBootloader but that does not find/recognise the device either.
If it helps -- My device is/was an O2 XDA Exec (Stock) which I had previously flashed with Tomal's v8.5
I am ready to try anything, please help!
P.S: The error is Error 112
Did you install ActiveSync on xp pc?
If not, do it now and try again.
I had similar problem. Had corrupted DOC sector
and MTTY was the only solution, but although the Serial changed to USB, I got 'unrecognised' message and Mtty didn't give USB as an option. At some point it occured to me that it was my computer's USB port, for some reason the device was recognised by 1 in 4 ports only, So I just tried my USB cable in different ports until the 'device unrecognised' messaged stopped appearing. Finally, after I was ready to cry in frustration, it just worked. Don't give up.
I heard it mentioned somewhere that the device that went through Mtty will be recognised only by the port used in Mtty procedure.
That... or your device's USB is no longer properly attached to the mainboard.
tomal said:
Did you install ActiveSync on xp pc?
If not, do it now and try again.
Click to expand...
Click to collapse
Already have activesync 4.5 installed with USB connection disabled...
Thank you so much for the prompt response and helpful thought!
enigma1nz said:
and MTTY was the only solution, but although the Serial changed to USB, I got 'unrecognised' message and Mtty didn't give USB as an option. At some point it occured to me that it was my computer's USB port, for some reason the device was recognised by 1 in 4 ports only, So I just tried my USB cable in different ports until the 'device unrecognised' messaged stopped appearing. Finally, after I was ready to cry in frustration, it just worked. Don't give up.
I heard it mentioned somewhere that the device that went through Mtty will be recognised only by the port used in Mtty procedure.
That... or your device's USB is no longer properly attached to the mainboard.
Click to expand...
Click to collapse
Thank you for the ray of hope! Will keep trying every hourly reboot in every USB port (4 in all).
Weird thing is I never had to go through mtty before so this is my first need for it.
Got the physical connection checked and it is supposedly OK...
Thank you for the prompt help...
Don't worry
I had exactly the same problem. First I tried this and it worked but still no connection via mtty. On that evening I disconnected and connected a lot and I removed the battery for a long time (one night). Later I could connect but I don't know why. Maybe these two things were the solution. Mtty showed "usb>" and I've done a DOC format...
If nothing works I would create a rom-image (on sunday or monday) for your sd-card like it's written in the service manual.
blingin said:
Thank you for the ray of hope! Will keep trying every hourly reboot in every USB port (4 in all).
Weird thing is I never had to go through mtty before so this is my first need for it.
Got the physical connection checked and it is supposedly OK...
Thank you for the prompt help...
Click to expand...
Click to collapse
No need for hourly reboots, just get into Bootloader, connect USB to your device and try different ports on computer with a few seconds in between to ensure no 'unrecognised device' message popping up. Once you'll get a connection - go for Mtty facility, the USB is the last on the list of ports.
330e said:
I had exactly the same problem. First I tried this and it worked but still no connection via mtty. On that evening I disconnected and connected a lot and I removed the battery for a long time (one night). Later I could connect but I don't know why. Maybe these two things were the solution. Mtty showed "usb>" and I've done a DOC format...
If nothing works I would create a rom-image (on sunday or monday) for your sd-card like it's written in the service manual.
Click to expand...
Click to collapse
There was no SD card when I began the initial flash but it still got stuck. Been trying without the SD and SIM but to no avail...
Thank you for the manual, downloading it now, will keep everyone posted in case anyone else is suffering from the same thing...
enigma1nz said:
No need for hourly reboots, just get into Bootloader, connect USB to your device and try different ports on computer with a few seconds in between to ensure no 'unrecognised device' message popping up. Once you'll get a connection - go for Mtty facility, the USB is the last on the list of ports.
Click to expand...
Click to collapse
Still trying, will keep you posted and thank you for the responses!
I think you understood me wrong. When your device is still unusable, I would create the files you need to do the steps in point 8.3 (Use Pre-loaded SD card to Re-flash Unit) in the service manual.
Sorry for my bad english
330e said:
I think you understood me wrong. When your device is still unusable, I would create the files you need to do the steps in point 8.3 (Use Pre-loaded SD card to Re-flash Unit) in the service manual.
Sorry for my bad english
Click to expand...
Click to collapse
It's the thought that counts not the language, thank you so much for your help!
I created succesfully a pre-loaded sd card, flashing via this sd works. But I can't copy the files. When I want to open the drive it says, that I have to format the sd card. Is there a special tool to copy the files? Or you find someone near you with a universal.
your need to format your SD after flashing.
330e said:
I created succesfully a pre-loaded sd card, flashing via this sd works. But I can't copy the files. When I want to open the drive it says, that I have to format the sd card. Is there a special tool to copy the files? Or you find someone near you with a universal.
Click to expand...
Click to collapse
tomal said:
your need to format your SD after flashing.
Click to expand...
Click to collapse
Tried the SD image method with a 128MB SD but didn't work. Maybe because I have a G4 and the method is for G3
managed to get a connection finally and ran MTTY, after "task28 55a" it just hung for a long time so I disconnected.
Tried running UNI_ExitBootloader.exe and now can get in and out of Bootloader but still cannot flash or connect...
Any suggestions welcome...
Try this....
This might sound silly but it's worked for me in the past.
1. Go into bootloader (without mem card or sim)
2. Plug-in the USB cable
3. Hold the buttons to go into bootloader again whilst plugged in.
4. DOC Format
5. Flash ROM
My Universal had loads of problems but that is how i fixed it, tried everything else like you, when i first plugged it in on the bootloader nothing happened until i pressed and held the buttons whilst it was plugged in, then windows made the usb connected sound so i quickly mtty'd! lol
Hope this helps, Good luck!!!
martinbrettphilo said:
This might sound silly but it's worked for me in the past.
1. Go into bootloader (without mem card or sim)
2. Plug-in the USB cable
3. Hold the buttons to go into bootloader again whilst plugged in.
4. DOC Format
5. Flash ROM
My Universal had loads of problems but that is how i fixed it, tried everything else like you, when i first plugged it in on the bootloader nothing happened until i pressed and held the buttons whilst it was plugged in, then windows made the usb connected sound so i quickly mtty'd! lol
Hope this helps, Good luck!!!
Click to expand...
Click to collapse
Thank you...
Xda2 stuck in bootloader screen after failed flash in vista
blingin said:
My Dear Samaritans,
Tried reflashing but got an error and the flash failed... also the program crashed during recovery.
When I connect the device to the computer(s) "Serial" changes to "USB" stuck within the bootloader screen
Tried mtty (1.16 & 1.42) but neither give me the option of USB, only COM1 and COM2. And had already de-activated the USB connection in Activesync.
Have read through the forum but have had no luck.
I am ready to try anything, please help!
P.S: The error is Error 112
Click to expand...
Click to collapse
Hi i have had similar problems also i have an XDA 2 pda originaly had wm2003 on it (tried to flash it to wm2003se ) can someone help me also im realy at a loss =C many thanks in advance (i will give more detail if someone actualy) replys to me
Wrong forum
Welcome to the forum
Universal does not means all devices, actually is a model
Please enter into the right section of the forum
Goos luck,
Can you Help?
I have an XDA II was on O2 uk network. I used to flash it all the time and knew my way around. however recently i flashed it in vista without thinking.. and as i upgraded the rom from wm2003 to wm2003se about 25% of the way through vista disconnected the device then it was unrecognised usb.. then vista started installing new drivers that recognised the device... however this then crashed flashing the rom onto the pda..
It wont soft or hard reset, i took the battery out for 24 hours and tried again and nothing.. the only thing on screen is that it says serial on the top of the screen (which changes to usb when connected but get error 101 when trying to reflash/ no activesync connection and am confused my mtty as when it does connect i cant type into the text area only paste)
on the bottom of the screen is v1.06 (which before the flash crash was V1.0 something lower than v1.06)
basicaly is the device recoverable as long as i have this serial / usb recognition by the device????? (using mtty i cant connect through ports or usb but thats because i dont seem to understand how to use it)
the other question is is there any other way to get a rom back onto the device without mtty or activesynch..
I pray that ysomeone will respond .. i miss my pda dearly
a thousand thanks in advance
i've just bought a kaiser from ebay. it worked for a few days until i decided to instal wm 6.5 on it. but i couldn't go that far. what i did: i've flashed a new radio on it, it worked fine. the next step that i wanted to take was to hardspl my kaiser but it didn't worked because i couldn't connect it to my laptop or my computer. i have windows 7 on both of them.
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader --> 1 and 2 steps didn't work because of the same problem, i can't connect the phone through usb.
how can i fix this?
in bootloader is on serial and when i plugin the usb cable it changes to usb and it starts charging. what can i do? except to try from win xp.
costyg said:
in bootloader is on serial and when i plugin the usb cable it changes to usb and it starts charging. what can i do? except to try from win xp.
Click to expand...
Click to collapse
Try this page, Bro: http://forum.xda-developers.com/showthread.php?p=3932827#post3932827
Goodluck.
drTaruna said:
Try this page, Bro: http://forum.xda-developers.com/showthread.php?p=3932827#post3932827
Goodluck.
Click to expand...
Click to collapse
Thank you but it doesn't work. I can't view my mobile in device manager so i can't update drivers. when i connect my mobile it says usb device not recognized, and i go in device manager and i try to update the drivers from the unknown device but it doesn't work.
is there another way to try to boot? without conecting the phone to the computer. can i use my micro sd card to do that? i think it doesn't work because i unchecked 'Allow usb connection' in device manager, and after that it's only in bootloader mode. it doesn't work if i check allow usb connection.
how can i do a hard reset? would that help?
now it works! i've just connected to other usb port. strange because yesterday i tried this thing without succes. but i still can't connect it to usb. i get this error: "The device cannot start. (Code 10)" it worked before with windows device center. what can i do to connect it to usb? is it safe to hardspl my phone from win 7?
On older pc's the front usb ports aren't always usb 2.0. A hard reset won't help you at this time. Unplug all your usb devices currently attached to your pc. Restart. Plug in your kaiser cable to a back port on the motherboard. Make sure in task manager, that all windows media device center entries are closed.
Does it still give a code 10 error after doing all this? If so then delete the USB host controller entries in device manager. Click start button in win 7 and type "device manager". Hit enter. Open up USB controllers tree. Right click and uninstall all host controllers. Reboot. Let it redetect everything. Now plugin your phone cable. If still getting code 10 error then you are either using a faulty usb cable or the wrong type of cable (usb 1 instead of 2).
costyg said:
now it works! i've just connected to other usb port. strange because yesterday i tried this thing without succes. but i still can't connect it to usb. i get this error: "The device cannot start. (Code 10)" it worked before with windows device center. what can i do to connect it to usb? is it safe to hardspl my phone from win 7?
Click to expand...
Click to collapse
Have you downgrade the driver with the attached one? And if we used 64bit system we should disable the driver enforcement as suggested.
It is wise to hardspl from XP if all the effort from win7 failed. Once it's done we could flash new rom through SD card.
stuntdouble said:
On older pc's the front usb ports aren't always usb 2.0. A hard reset won't help you at this time. Unplug all your usb devices currently attached to your pc. Restart. Plug in your kaiser cable to a back port on the motherboard. Make sure in task manager, that all windows media device center entries are closed.
Does it still give a code 10 error after doing all this? If so then delete the USB host controller entries in device manager. Click start button in win 7 and type "device manager". Hit enter. Open up USB controllers tree. Right click and uninstall all host controllers. Reboot. Let it redetect everything. Now plugin your phone cable. If still getting code 10 error then you are either using a faulty usb cable or the wrong type of cable (usb 1 instead of 2).
Click to expand...
Click to collapse
i've installed win xp and i couldn't sync it so it's not a problem with the usb ports on the computer. the usb cable is fine. a few days ago i could sync the device with the same usb cable. now it's showing that is charging so it shouldn't be a cable problem.
drTaruna said:
Have you downgrade the driver with the attached one? And if we used 64bit system we should disable the driver enforcement as suggested.
It is wise to hardspl from XP if all the effort from win7 failed. Once it's done we could flash new rom through SD card.
Click to expand...
Click to collapse
no, i didn't do anything. it just worked. i did a reset and it passed the bootloader, it wasn't the first reset, it was strange but it worked. now i made a change on my device: start->settings->connections->usb to pc->and i unticked the 'enable advanced network functionality'. with this option i see "mobile devices->htc usb" sync in device manager but still i can't sync it. what can i do?
could this be related to the radio i've flashed? here is the rom and radio that i have. i don't know what radio i had before.
costyg said:
i've installed win xp and i couldn't sync it so it's not a problem with the usb ports on the computer. the usb cable is fine. a few days ago i could sync the device with the same usb cable. now it's showing that is charging so it shouldn't be a cable problem.
no, i didn't do anything. it just worked. i did a reset and it passed the bootloader, it wasn't the first reset, it was strange but it worked. now i made a change on my device: start->settings->connections->usb to pc->and i unticked the 'enable advanced network functionality'. with this option i see "mobile devices->htc usb" sync in device manager but still i can't sync it. what can i do?
Click to expand...
Click to collapse
We should downgrade the driver with the one attached in the linked site above and do as suggested, or the pc won't recognize the device in bootloader. Pls read and do as suggested. It won't spent more than 10 minutes to try.
drTaruna said:
We should downgrade the driver with the one attached in the linked site above and do as suggested, or the pc won't recognize the device in bootloader. Pls read and do as suggested. It won't spent more than 10 minutes to try.
Click to expand...
Click to collapse
well the device it's not in bootloader anymore. now the problem is that i can't connect it to the computer through usb. which radio would be good for my rom? radio is the problem?
So you are no longer getting the code 10 error, now you have installed XP?
costyg said:
could this be related to the radio i've flashed? here is the rom and radio that i have. i don't know what radio i had before.
Click to expand...
Click to collapse
Failure to connect with pc is not related to the radio rom. Ur radiorom is alright. The latest one is 1.71.09.01. It give a little possitive change in connection performance in GPRS/3G and GPS and change in battery drain depend on the signal in our country. Unmatched radiorom may cause bad signal and bad battery drain. Sometimes the camera will fail to start. U could search for the topic later. Goodluck.
costyg said:
well the device it's not in bootloader anymore. now the problem is that i can't connect it to the computer through usb. which radio would be good for my rom? radio is the problem?
Click to expand...
Click to collapse
We SHOULD download this driver: http://forum.xda-developers.com/attachment.php?attachmentid=194418&d=1244659513 and installed them to our PC (not ppc) as suggested HERE: http://forum.xda-developers.com/showthread.php?p=3932827#post3932827 !!!
The mean of this is to DOWNGRADE the wceusbsh.sys of Win7 or Vista so it could connect to the ppc through bootloader.
If u fail to force ur device to bootloader through hardbutton, try to copy and unzip the attached file (enterbootloader.exe) into ur sd-card through the cardreader and run.
stuntdouble said:
So you are no longer getting the code 10 error, now you have installed XP?
Click to expand...
Click to collapse
no, i don't get the code 10 error anymore but its still not working. there's an exclamation point on windows mobile based device.
drTaruna said:
Failure to connect with pc is not related to the radio rom. Ur radiorom is alright. The latest one is 1.71.09.01. It give a little possitive change in connection performance in GPRS/3G and GPS and change in battery drain depend on the signal in our country. Unmatched radiorom may cause bad signal and bad battery drain. Sometimes the camera will fail to start. U could search for the topic later. Goodluck.
Click to expand...
Click to collapse
thank you. i don't what to do. i wanted to make a upgrade to wm 6.5 but if i can't sync my mobile. it's good that i'm not stuck in bootloader anymore.
if i couldn't sync my mobile after a fresh install of win xp with active sync 4.5, what can i do? the cable is fine, the mobile wasn't damaged.
costyg said:
no, i don't get the code 10 error anymore but its still not working. there's an exclamation point on windows mobile based device.
thank you. i don't what to do. i wanted to make a upgrade to wm 6.5 but if i can't sync my mobile. it's good that i'm not stuck in bootloader anymore.
if i couldn't sync my mobile after a fresh install of win xp with active sync 4.5, what can i do? the cable is fine, the mobile wasn't damaged.
Click to expand...
Click to collapse
Here is the guide for upgrading our device: http://forum.xda-developers.com/showthread.php?t=433835
Follow the suggestion carefully after a careful reading. Goodluck.
drTaruna said:
Here is the guide for upgrading our device: http://forum.xda-developers.com/showthread.php?t=433835
Follow the suggestion carefully after a careful reading. Goodluck.
Click to expand...
Click to collapse
i know the guide but i can't apply it because i can't hardspl my phone. that's why i want to fix the sync problem.
costyg said:
i know the guide but i can't apply it because i can't hardspl my phone. that's why i want to fix the sync problem.
Click to expand...
Click to collapse
OK, post #14 is a guide if u use vista or Win7. Goodluck with XP and activesync 4.5
drTaruna said:
OK, post #14 is a guide if u use vista or Win7. Goodluck with XP and activesync 4.5
Click to expand...
Click to collapse
thank you, i hope i will fix it.
Hello guys please help I was trying to update my 02 XDA (Polaris) to a pcarvalo extreme ROM and I had reached 85 % then all of a sudden a power failure and I now am having a bricked O2 XDA that is stuck on HardSPL2 screen red,green,blue, white....now when i try to update due to no connection with activesync I can´t progress beyond the initial screen of detection... please please how do I put a ROM back on to the device???? Anyone please please
Thanks for all the help
Regards
Tariq
t_malik said:
Hello guys please help I was trying to update my 02 XDA (Polaris) to a pcarvalo extreme ROM and I had reached 85 % then all of a sudden a power failure and I now am having a bricked O2 XDA that is stuck on HardSPL2 screen red,green,blue, white....now when i try to update due to no connection with activesync I can´t progress beyond the initial screen of detection... please please how do I put a ROM back on to the device???? Anyone please please
Thanks for all the help
Regards
Tariq
Click to expand...
Click to collapse
Hi,
Check this...
http://forum.xda-developers.com/showthread.php?t=425922
Thanks to [email protected], I hope It's good for you...
Cheers.
Thanks but so far no success
Thanks but so far no success as its impossible despite killing all activesync processes to get MTTY active on USB. The XDA itself shows the change from serial to usb but the MTTY does not find it apparently as USB option does not become available.
Tariq
t_malik said:
Thanks but so far no success as its impossible despite killing all activesync processes to get MTTY active on USB. The XDA itself shows the change from serial to usb but the MTTY does not find it apparently as USB option does not become available.
Tariq
Click to expand...
Click to collapse
did you run mtty from vista or win 7.....??
best is win xp....
Tried running both from Win 7 and XP on another machine, it does not seem possible for MTTY to find the USB despite all wce processes and winrapi etc have been killed !
Any suggestions?
Thanks again for all the help
Tariq
t_malik said:
Tried running both from Win 7 and XP on another machine, it does not seem possible for MTTY to find the USB despite all wce processes and winrapi etc have been killed !
Any suggestions?
Thanks again for all the help
Tariq
Click to expand...
Click to collapse
ok...this i write in another thread...maybe it helps you....:
read this...post 12.....he write...Now i can enter in 3 colors. Make this:
http://forum.xda-developers.com/showthread.php?t=636170&page=2
Still not able to get MTTY to show a USB in dropdown menu ...???? Amazing despite ripping almost all processes out not possible to get MTTY to detect the XDA
Thanks anyways
Tariq
Have you dissabled usb connections in WMDC (windows mobile device center) what version mtty you using ? i had best results with mtty_0513_Test.exe, you can also use putty.
Thanks Mekrib
I had disabled the USB connection in WMDC and On activesync on the XP PC and i used MTTY v.1.42 as this was the only one i found. Perhaps your version might help.
As much as i understand there seems to be a problem for the windows envoirnament to recognize the device as a USB device in the state it is in, amazingly does the XDA it self seem showing appropriate USB message when connected and Serial when the USB cable is unplugged. I was thinking perhaps to find a pc where activesync was never installed and then install the MotoQ driver and then try to run this MTTY.
Bye the way a link to MTTY of your version a believe is a test version would be highly appreciated.
Thanks again all of you guys I feel i am not suffering alone.
My best salutations to you all
Tariq
mtty works with vista xp win7 , plug your phone into pc before starting mtty.
out of interest what task are you going to run with mtty?
Thanks again
Unfortunately still no success even with this version of MTTY and I even tried out on other PC´s where activesync was not installed. Apparently the problem is that the phone device is not recognized in any system as a new device or even as a device. Only solution I can think of is some way to have the device boot from SD card if there is some way of doing this. I tried the NAND thing but again there one either has to flash something or use MTTY in my case none of these options seem to work as I am not able to communicate with the device using a computer through even MTTY
If someone has any other idea´s I am willing to give it a go
Thanks again every1
Tariq
Hi there chris
I was hoping to do following:
SET 16 0
Task 8 (format)
Task 0 (boot)
Then hopefully device would boot as it does have the basic IO( Bios) eqvivalent doesn´t it?
Regards
Tariq
You can re flash just run ruupdate again, if it failed at 85% your rom wouldn't boot.Check in device manager if your phone is recognized properly otherwise you wont be able to flash.
Thanks Meknb
Thats the whole idea stopping flashing due to power failure at 85% has somehow made the device locked to going on to a boot till the tricolor screen with the info: Pola200 MPG , SPL-2.20.0linex CPLD-2
and serial/usb but no computer is able to detect the device.
I guess it has had it then...:-(
Respects
Tariq
Can't you copy your rom to your sdcard rename it polaimg and flash it that way?
Great Idea but with the original rom O2 (UK) and 2 pcharvelo roms it did not work and when the XDA boots I can barely see but it does in fact write no image found and the switches to the tricolor serial/usb picture
Maybe I have to get more info on exactly how the image file should be in terms of name and location and which rom file to use for the microSD.
Thanks I shall look for possible image files.
Thanks again
Tariq
POLAIMG all in caps at the root of your card should work.
Sorry Meknb but tried even that with caps and everything it still say no image found.
Thanks again
Tariq
Success
Yes Finally its alive again !!
Here is what I had to do:
Take the original O2/UK rom rename it to POLAIMG.nbh and place it on root of microSD card
Then and here is he important difference in what i was doing previously just press power button and it then detects the image and completes the reflashing of the rom.
Alhamdolillah (Thank god) I thought I had lost it
Thanks guys all of you and I hope anyone else who gets in my situation will benefit from this
Respects
Tariq
I think... I actually bricked my device, I was flashing my stock firmware through SP Flash Tool, But it said you need Auth File, So I downloaded an Auth Bypasser, Then I clicked download, It started downloading, and it was done, I tried to boot up my phone, but it didn't. So, I formatted the Phone through the SP Flash tool, and again downloaded my firmware. Then I received an error about Verified Boot*, Then I deselected the ISO's which were causing the problem. But since then, SP Flash tool lagged, and crashed. Since then its not recognizing the device anymore. I tried going to the Device Manager, but it says:
"Unknown USB Device (Device Descriptor Failed)",
"Windows has stopped this device because it has reported problems. (Code 43)"
"A request for the USB device descriptor failed."
What can I do to fix it???? Which Drivers I need? I am using a Infinix Note 7, X690B MT6768.
Please tell me the fix real quick, as its an emergency.
Thanks.
[Update]: I found the fix Today, Just disconnect battery, and reconnect, it will fix, and for IMEI, go to: https://forum.xda-developers.com/t/...ote-7-x690-x690b-x690c.4592491/#post-88605287
Requesting a device descriptor is the first thing that a USB host does to enumerate a device.
That message is complete Windows-speak for pretty much complete failure.
This can be caused by bad USB cables, bad power, bad interference or simply that (in the case of Android) that the USB gadget has not been initialized correctly.
Try different cables, different ports, different machines. Check that other devices are recognized.
When all that fails then you know your device is in some twilight state.
Renate said:
Requesting a device descriptor is the first thing that a USB host does to enumerate a device.
That message is complete Windows-speak for pretty much complete failure.
This can be caused by bad USB cables, bad power, bad interference or simply that (in the case of Android) that the USB gadget has not been initialized correctly.
Try different cables, different ports, different machines. Check that other devices are recognized.
When all that fails then you know your device is in some twilight state.
Click to expand...
Click to collapse
Yes, I really well know that my device is effed up, But I went to the Tech Support today, they also asked me it is showing a same error, on their PC, but they did something which made it again recognizable. I just saw then opening the Phone.
Any Idea what they could've done?
TechySkills said:
Any Idea what they could've done?
Click to expand...
Click to collapse
They probably disconnected the battery for a few seconds.
What state is your device in now?
Renate said:
They probably disconnected the battery for a few seconds.
What state is your device in now?
Click to expand...
Click to collapse
Its fixed now, But it costed money.....
TechySkills said:
But it costed money.....
Click to expand...
Click to collapse
Sorry.
Renate said:
Sorry.
Click to expand...
Click to collapse
Update: The mobile is fixed, But It says IMEI Unknown, and I cant make calls, How do I fix it?
TechySkills said:
How do I fix it?
Click to expand...
Click to collapse
Did they flash your whole phone and leave you with no IMEI?
I know very little about Baseband Processor (radio, modem).
Do you have the IMEI written down or the box your phone came in?
I'd go back to the people that took your money.
Renate said:
Did they flash your whole phone and leave you with no IMEI?
I know very little about Baseband Processor (radio, modem).
Do you have the IMEI written down or the box your phone came in?
I'd go back to the people that took your money.
Click to expand...
Click to collapse
Yes, I do have my IMEI with me, I searched on internet about flashing IMEI, I searched in my Firmware for Apdp, But I found 3 Md1 files, idk which one is the real one for the sn tool.
md1arm7
md1img
md1img-verified
Renate said:
Did they flash your whole phone and leave you with no IMEI?
Click to expand...
Click to collapse
Yes, I guess......