Database Info

[CM10/ICS/MIUI][KERNEL][GPL][rc-3] ♫♫ Titanium.Kernel ♫♫ An All in one Kernel! ♫

[CM10/ICS/MIUI][KERNEL][GPL][rc-3] ♫♫ Titanium.Kernel ♫♫ An All in one Kernel! ♫
Whats up guys!
So.. you'll already know me
SO no Introductions.
For those who don't know me, I am a Kernel Developer, Check the links in my signature to see my work
Now.. Getting back to topic!
Presenting.........
★★★ Titanium Kernel for Galaxy R - GT-I9103 ★★★
Remember,
Code:
[B]/* DISCLAIMER */ [/B]
[SIZE="5"][FONT="Arial Black"][COLOR="Red"][U]I do not own the device![/U][/COLOR][/FONT][/SIZE]
[COLOR="Red"][B][FONT="Arial Black"]You are choosing to make the modifications at your own risk.[/FONT][/B][/COLOR]
This Kernel is for Samsung ICS ROMs or any ROM based on Samsungs stock ROMs.
★ What my Kernel is made up of ★
★ This Kernel will work on every ROM, look into Downloads section and select your Kernel. ICS Kernel will work on Angeeks ROM
eMMC Brick bug cleaned up.
Based on Samsung ICS Update 2 Sources
Compiled with Linaro 4.6.2 toolchain
Overclock upto 1.2 Ghz
GPU Overclock upto 410 Mhz
All Linux memory Management Parameters tuned up for best performance.
Optimized ARM RWSEM Algorithms.
ARCH Power Enabled
JRCU (Joe's RCU, best suited for small SMP Systems!)
Proportional Rate Reduction for TCP by Google.
RAM Console Debugging Removed (More RAM)
Reclaimed RAM from Android Logger(logcat) (More RAM)
RAM Hack based on my old GB Kernel patch(+56 MB)
Voodoo Sound
Enabled NTFS Filesystem
Auto Brightness Fixes (ardatdat)
TCP/IP Tweaks
XZ Compression for Kernel (++speed,--size)
Using SLUB Memory Allocator (I always prefer this!)
Unneeded Stuff cleaned up in defconfig
EXT4 is default, EXT4 is used for mounting EXT2 and EXT3 (Faster)
NOATIME NODIRATIME Mounts set as default
Governers: Hotplug, Smartass2, Performance, Ondemand, Conservative.
IO Schedulers: Noop and CFQ (Default)
..
ROW IO Scheduler
BLN Support w/ liblights loaded from ramdisk
WIFI MAC Address Changing support
Lots of Makefile Optimizations + GCC 4.6 Optimizations
Dynamic FSYNC Control (faux123)
Stochastic Fair Blue Net Scheduler
Optimised swahb32() byteswap helper
Code cleanups done where necessary
IO Patches
TUN/TAP Driver built in
--
Cleancache Support
KSM Enabled
Disabled unnecessary drivers
LZMA Compressed Ramdisk (--size)
N1 Board and Touchscreen driver fully cleaned up of all Samsung **** ups and warnings!
Lots more stuff! Flash and see for yourself.
Ramdisk Mods:
Auto-root (SuperSU)
BLN Liblights loaded from ramdisk itself
Auto-EFS Backup
init.d scripts run on boot
Custom Bootanimation support (ICS ROM)
Other misc stuff.
TODO:
[*]Fix all Kernel warnings and crap samsung code.
[*]Get rid of TEGRA CPU LOCK.
[*]Set up Custom Voltage sysfs.
[*]Fix all game lags.(Which is present on stock Samsung sources and ROMS)
[*]Port some more Tegra specific mods from other Tegra devices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
★ I plan to contribute a lot to this Kernel in the near future! Test it and let me know. ★
★ Also, I plan to clean up lots of Samsung **** code and **** ups in the source ★
★ Remember, I do not have the device so it will take me time to fix up bugs (If there are any) ★
Credits ,
☑ Many of the patches on my source which I have incorporated may not be programmed by me, I have credited them on my github.
☑ Adam77Root, ardatdat (Kernel patches, credited on my github)
☑ faux123
☑ parmarket,shaheen(For testing this first on their phone)
☑ and MEEEeeee .. of course!

Changelogs
Code:
[B]Kernel rc-1[/B]
Initial Release
[B]Kernel rc-2[/B]
CM10 Support
AOSP Vibrator fix
KXTF9 Sensor driver for CM10
BLN Support w/ liblights which will be loaded by ramdisk
Enabled Wifi MAC Address Changing ability
Makefile Optimizations
SYNC Frameworks and SW Sync
XZ Compression for Kernel
ARM CPU Topology
Dynamic FSYNC Control (faux123)
ROW IO Scheduler ~Enabled by default (Meant for mobile devices)
Added ARM NET JIT Compiler
Add optimised swahb32() byteswap helper
Lots more stuff, too technical to explain, check my github.
[B]Kernel rc-3[/B]
---COMING UP-----
Stability fixes, fixed hangs,lags from rc-2.
Lots of Code Cleanups for better optimized code!
Board-n1 cleaned up of all warnings
Atmel MXT-224E driver cleaned up of all warnings.
GCC 4.6 (Linaro) Optimizations
MIUI Support
Reverted SYNC,SW_SYNC,ARM NET JIT Compiler (Will have to do testing!)
Enabled KSM
Enabled CLEANCACHE
Disabled a lot of unnecessary drivers to reduce memory footprint in Kernel.
LZMA Compressed Ramdisk (--size)
Bumped reserved memory to 200MB
Asynchronous I/O latency to a solid-state disk greatly increased (cherry-picked)

Downloads
Download: Titanium Kernel rc-3 - ICS
Download: Titanium Kernel rc-3 - CM10
Download: Titanium Kernel rc-3 - MIUI
-------- OLD VERSIONS NOT RECOMMENDED! -------------
Download: Titanium Kernel rc-2 - ICS
Download: Titanium Kernel rc-2 - CM10
Download: Titanium Kernel rc-1

FAQ's
FAQ:
1) Do not use 3rd party init.d scripts! If you wish to use any ask in the thread. I will tell you if you can.
2) How to flash the Kernel?
A: Flash the zip via CWM ... duhhh! :victory:
3) Why only 4 governers ?
A: Too many Governers bloat the Kernel, many are quite similar.
Best Governer for Battery: Conservative
Best Governer for Performance: Smartass2 or Performance
4) Can you add support to turn off one cpu core?
A: You don't need to do it manually, Hotplug governer knows when to turn off one core.
5) Will you overclock more?
A: No, 1.2 Ghz is enough. We wan't stability and not problems.
6) I got X bug, I got Y bug.
A: I will fix it, recreate the problem and give me a logcat. Remember, it may take time and testing to fix a bug since I do not have the device.
7) Will this support CM in future?
A: Ofcourse! I will also be helping in CM development soon.
8) My phone does not enter deep sleep.
A: Some app is constantly waking up your phone.
9) DO NOT USE ANY SET CPU PROFILES! .
A note on How-to report bugs.

Great one buddy. Unfortunately over CM10. will b waiting for CM10 kernel. thanks again.:fingers-crossed:

Great work Buddy :good:. Cud u add the stopbootanimation service at end of script in init.rc so that v can use this kernel for custom bootanimation.:highfive:

thanks
thanks buddy, nice work, all feature sounds great :good:
I particularly like of have only 4 governers which is simple and useful , too much confuse most of the time. :laugh:
thanks again and keep it up :good:

I wish u had kept interactive governer. Anyways, will try this after college.
Sent from my GT-I9103 using xda app-developers app

kataria.vikesh said:
Great one buddy. Unfortunately over CM10. will b waiting for CM10 kernel. thanks again.:fingers-crossed:
Click to expand...
Click to collapse
Will add CM support post the CM10 boot.img here.
selva.simple said:
Great work Buddy :good:. Cud u add the stopbootanimation service at end of script in init.rc so that v can use this kernel for custom bootanimation.:highfive:
Click to expand...
Click to collapse
Yeah, can do it. Will build my own ramdisk in the next release.
gitanshu said:
I wish u had kept interactive governer. Anyways, will try this after college.
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
I will drop ondemand and add interactive, Interactive governer is an improved version of ondemand.. anyways.. this is first release ... lots to come still!

will it work on angeeks rom??

kunaal2580 said:
will it work on angeeks rom??
Click to expand...
Click to collapse
No. Currently this does not support custom boot animation which if u flashed on angeek's rom will result in bootanimation loop.

Adi_Pat said:
Will add CM support post the CM10 boot.img here.
Click to expand...
Click to collapse
Edit: here is the link of cm10 kernel
http://db.tt/lrOpqrxL :victory:

kataria.vikesh said:
Edit: here is the link of cm10 kernel
http://db.tt/lrOpqrxL :victory:
Click to expand...
Click to collapse
Gimme a few mins, making it CM Compatible , just need to pack teh ramdisk with my Kernel .. (Hopefully nothing more, someone will have to test it)

kataria.vikesh said:
Edit: here is the link of cm10 kernel
http://db.tt/lrOpqrxL :victory:
Click to expand...
Click to collapse
Does it have bln mod?
Sent from my GT-I9103 using Tapatalk 2

Benchmarks
these are some benchmarks of this Kernel (With Geeky Engine)
CPU speed 1Ghz
Governer: smartass2
CPU speed 1.2Ghz
Governer: smartass2

Good work! Waiting for the anti boot loop kernel support for the angeeks ROM.
Enviado desde mi GT-I9103 usando Tapatalk 2

@Adi_Pat: To make the kernel compatible with CM10, do the followings:
1. Implement vibrator fix. (https://github.com/epsylon3/android...mmit/720914d5009039d3ba9898361eea1ad8ab09d326)
2. Add raw KXTF9 accelerometer sensor. (https://raw.github.com/epsylon3/android_kernel_samsung_i9103/gingerbread/drivers/input/misc/kxtf9.c Put it into drivers/sensors, modify Makefile and KConfig accordingly and enable it in defconfig.)
3. Take the ramdisk.
You don't have to compile two different kernels for the two roms, only change the ramdisk. The kernel works quite well in hybrid mode with the modifications included.
Also, if you have time please include these patches into your kernel. I'd really appreciate them. Thanks!

Adam77Root said:
@Adi_Pat: To make the kernel compatible with CM10, do the followings:
1. Implement vibrator fix. (https://github.com/epsylon3/android...mmit/720914d5009039d3ba9898361eea1ad8ab09d326)
2. Add raw KXTF9 accelerometer sensor. (https://raw.github.com/epsylon3/android_kernel_samsung_i9103/gingerbread/drivers/input/misc/kxtf9.c Put it into drivers/sensors, modify Makefile and KConfig accordingly and enable it in defconfig.)
3. Take the ramdisk.
You don't have to compile two different kernels for the two roms, only change the ramdisk. The kernel works quite well in hybrid mode with the modifications included.
Also, if you have time please include these patches into your kernel. I'd really appreciate them. Thanks!
Click to expand...
Click to collapse
Thanks! Sure I will. Will merge your patches soon.
Still studying the source.. looks like lots can be improved!

Super cool.. awesome kernel..
Working great.. thanks
Sent from my GT-I9103 using xda premium

parmarket said:
these are some benchmarks of this Kernel (With Geeky Engine)
CPU speed 1Ghz
Governer: smartass2
CPU speed 1.2Ghz
Governer: smartass2
Click to expand...
Click to collapse
Hi Ketan, Are you using Adi's kernel on miui rom? or CM10? was curious if it works fine on Paraj's miui rom.

[KERNEL] Emotion r14 - 19 May 2015 - s2w/sts,intelliplug,io, - Fan promotion

*NOTE: This is not the official thread for Emotion kernel. I'm merely an avid Android tweaker, found this kernel for N910T (T-Mobile Galaxy Note 4) and couldn't locate the official thread. If I overlooked such a thread, forgive this dupe.
Several Note 4 Android ROMs are being built with this (TekHD ,for example)
At any rate, here are the features and other info (taken from the developer's website)
DOWNLOADS and INFO
http://www.emo-troid.com/kernel-downloads.html[/SIZE]
FEATURES (taken from dev website)
Kernel compatible with SM-N910F SM-N910G SM-N910P SM-N910T SM-N910V
Based on Samsung Open Source Code
Compiled with Toolchain Linaro GCC 4.9.3 2015.03 Cortex A15
Linux version 3.10.76
OC/UC -> 3072MHz / 268MHz
PowerSuspend Driver
Intelli-Plug V4.0
KSM enabled
Sweep2wake
Simple GPU Algorithm
Voltage Control
Intelli-Thermal
KCAL - Advanced color control
Led Control
CRC Settings
Advanced TCP control
S-View flip cover hack
Selinux Permissive
CIFS Support
NTFS Support
LZ4 compression algorithm
Reduced wakelocks
Frandom number generator
Synapse full support
Governors: Barry-Allen, interactive_pro, intelliactive, bluactive, conservativex, alucard,darkness, nightmare, smartassV2, ondemandplus, umbrella_core, yankactive, dancedance, bioshock, lionhearth, conservative, interactive, ondemand,powersave, userspace, performance
I/O Scheldures: bfq, vr, fiops, zen, fifo, sio, test-ioshed, cfq, row, deadline, noop
CHANGELOG (taken from dev website)
May- 11 -2015 nightly r14
-Linux updated to 3.10.77
-Selinux back to full permissive (Fixed gear vr compatibility, etc.)
-WIFI optimized (Thanks to @javilonas)
-Fixed T-Mobile Synapse compatibility
-Crypto: Updated to armv7-a Neon
-Busybox updated to 1.23.2 to fix some issues with Synapse
-Fixed all known bugs from r12+1
-Fixed some minor bugs in the ramfs
-Another minor fixes
May- 8 -2015 nightly r13
-Linux updated to 3.10.76
-Kernel compatible with SM-N910T
-Reverted "power: make sync on suspend optional"
-KCAL updated
-The kernel boot on Selinux enforcing but you can change the status from Synapse
-qcom-cpufreq: Removed save/restore of scheduling policy
-cpufreq_interactive: updated again from Shamu source
-cpufreq: stats: Don't update cpufreq_stats_table if it's NULL
-cpufreq: Break out early when frequency equals target_freq
-msm: lpm-levels: add suspend_again handler
-msm: Fix high load average from uninterruptible waits
-qcom: mpm-of: fix bug in finding the pending interrupts
-Added new governor Barry-Allen by Javilonas
-CIFS and NTFS built in the kernel
-Ramfs optimized (New tweaks,etc. thanks to Javilonas for some scripts)
-Synapse support KCAL control
-Added profiles in Synapse
-Added profiles for LMK in Synapse
-Added global voltage control in Synapse
-Change Selinux status from Synapse>MISC
-Fixed some bugs in Synapse

http://forum.xda-developers.com/showthread.php?t=2990557
BAD ASS NOTE 4

@barcarDILIMON THANKS! I'll close this

Has anyone tested it the new kernel I'm using it with no problems so far I installed r16 and just wiped cache

freakyd9984 said:
Has anyone tested it the new kernel I'm using it with no problems so far I installed r16 and just wiped cache
Click to expand...
Click to collapse
Not yet. I don't really update kernels when I'm doing good with what I have,

Anyone else having issue with the saving of a "Profile" w/ the included and recommended "Synapse app" that comes with this Kernel?
I have had different errors, yet same results per each release on the (910T) Note 4 on r14, r15, and now r16...
So since this thread is here in T-Mobile forum discussing and I'm not getting much of an answer in it's original thread due to so many different variants/released versions, thought I would throw that question out here :fingers-crossed:

Working good for me... tmo note 4.

*Note: I discovered the error with inability to save "profiles" w/ this kernel & Synapse was due to the app "FolderMount" which modifies a /system level file :sdcard.
After some research and rolling back to original said file & uninstall of "FolderMount" app, all is well.
Just wanted to report so if anyone else runs into mentioned issue 2 posts back.. :good:

Is this for kk or lp?

Should note that this is for LP. Just tried on my KK and died.

WingedCow said:
Should note that this is for LP. Just tried on my KK and died.
Click to expand...
Click to collapse
Hopefully you had a stock kernel ready to flash lol or a backup of one

any hope for some support for the n910w8 variant?

Ryado said:
any hope for some support for the n910w8 variant?
Click to expand...
Click to collapse
The latest version of emotion works on our n910w8...running r17 right now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fyi the official emotion kernel thread can be found here: http://forum.xda-developers.com/showthread.php?p=57886425

sefrcoko said:
The latest version of emotion works on our n910w8...running r17 right now
Fyi the official emotion kernel thread can be found here: http://forum.xda-developers.com/showthread.php?p=57886425
Click to expand...
Click to collapse
Does this kernel effect signal?

nique0201 said:
Does this kernel effect signal?
Click to expand...
Click to collapse
Not that I'm aware of. Normally your modem affects signal...

Thread Closed as dupe and OP request

[KERNEL] (07SEP) GoogyMax-N4 2.0 [TW / AOSP -Lollipop] (Linux 3.10.87 / GCC 5.1.1)

This kernel is for Samsung Galaxy Note4 SM-N910C
TOUCHWIZ 5.0.x & 5.1.1 (Lollipop) AND for @RaymanFX AOSP builds !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features :
- Based on N910CXXU1BOE3 / XXU1COH4 Samsung Lollipop Sources
- Updated to latest XXU1BOG1 / XXU1COH4 ramdisk
- Patched to latest Linux 3.10.87
- Compiled with gcc 5.1.1 :good:
- Compiled with gcc optimization flags (especially for exynos cpu)
- CPU Voltage control (Deltas up to +/- 100 mV)
- CPU Clock control (A53: 200MHz -> 1800MHz / A57: 500MHz -> 2100 Mhz)
- GPU Voltage control (Deltas up to +/- 100 mV)
- GPU Clock control (266MHz -> 800MHz)
- GPU Thermal throttling control
- LED fading control
- Fixed GPU problem causing lags and poor performance
- Wolfson sound engine
- SELinux set to permissive
- TCP congestion controls: bic-westwood-htcp-hispeed-hybla
- arch_power & gentle fair sleepers switchable
- switchable logger via sysfs
- STweaks support
- Switchable SSwap
- Switchable init.d execution
- FIXED MEM LEAK + SLOW RECENT APPS !!!
- MORE TO COME ...
Thanks :
The Beta Team: @arbi97, @andrew.mackew
- Samsung : For the code source
- Main inspiration of all included features and commits : @AndreiLux - @halaszk88 - @UpInTheAir - @kadiremrah - others (credits in github)
- THE WONDERFUL XDA COMMUNITY !!!
Signature for users :
XDA:DevDB Information
[KERNEL] (07SEP) GoogyMax-N4 2.0 [TW / AOSP -Lollipop] (Linux 3.10.87 / GCC 5.1.1), Kernel for the Samsung Galaxy Note 4
Contributors
googy_anas
Source Code: https://github.com/googyanas
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2015-09-07
Created 2015-06-05
Last Updated 2015-09-07

Downloads for TW 5.0.x & 5.1.1
[07SEP] Version 2.0 for TW5.1.1 :
- Built from scratch based on XXU1COH4
- Updated ramdisk to XXU1COH4 (permissive mode)
- Patched to 3.10.87
- A lot of patches & tweaks (lowmemkiller, kernel sched, arm, readahead, mm, ...)
- Ported HOTPLUG_THREAD_STOP from S6 sources
This is my departure gift as I am leaving Note4 N910C in favor of S6 G920F
[16AUG] Version 1.8 :
- Patched to 3.10.86
- A lot of patches & tweaks (lowmemkiller, kernel sched, smp, arm, workqueue ...)
Please confirm better responsiveness and battery life
[06AUG] Version 1.7 :
- Updated ramdisk to BOG1
- Added more GPU controls in stweaks (highspeed, tmu switch, tripping)
- Tuned GPU throttling levels
- A lot of tuning and reverts to get back to best balance between performance and battery life
I did my best on this one but all the credit goes to @arbi97 who tested every single change until the final result
PS: I didn't have time to look into the sound problem
[19JUL] Version 1.6 :
- Made SSwap and init.d switches ON by default
- Add KERNEL_MODE_NEON support
- Full support of Unaligned Memory Access
- Added LZ4 support
- Disabled a lot of debugging
- various performance tweaks (mmc, fs, ext4, ...)
IS IT SMOOTH ENOUGH NOW ???
Happy Aïd to all muslims :angel:
[12JUL] Version 1.5 :
- patched to 3.10.84
- compiled again with gcc 5.1.1
- cpufreq: minor tweaks
- Added SSwap switch (off by default) & swappiness control
- Added switch for init.d execution by kernel boot script
- A lot of ramdisk & internal scripts corrections
- Googy-Max STweaks is now installed as user app not system
[06JUL] Version 1.4 :
- patched to 3.10.83
- FIXED MEM LEAK + SLOW RECENT APPS !!! (Now check memory usage and the speed of recent apps )
- Added LED fading control
- exynos: correct ASV max/min voltage values
- Cpufreq: raise OC for A53 to 1.8GHz and for A57 to 2.1GHz
This is a special gift to all XDA followers. In return, please have some kind prayer for me as I am having surgery early this morning (ouch !) :angel:
[01JUL] Version 1.3 :
- patched to 3.10.82
- Compiled with linaro gcc 4.9 with optimization for cortex cpu
- various optimizations (mm, random, memcopy, sched, fs, mmc, ...)
- Some more fine-tuning for GPU scaling & throttling
[20JUN] Version 1.2 :
- patched to N910CXXU1BOE3 source drop
- Compiled with gcc 5.1.1
- CPU Voltage control (Deltas up to +/- 100 mV)
- CPU Clock control (A53: 200MHz -> 1500MHz / A57: 500MHz -> 2000 Mhz)
- GPU Voltage control (Deltas up to +/- 100 mV)
- GPU Clock control (100MHz -> 800MHz)
- GPU Thermal throttling control
- Re-Enabled swap, vnswap and zswap
- TCP congestion controls: bic-westwood-htcp-hispeed-hybla
- arch_power & gentle fair sleepers switchable
- Switchable logger via sysfs
- STweaks support
- Some more fine-tuning
Happy Ramadan to all muslims :angel:
[10JUN] Version 1.1 :
- patched to linux 3.10.80
- Fixed GPU DVFS problem causing lags and poor performance
- Wolfson sound engine (not yet configurable except via sysfs)
- some cpufreq tweaks
- disabled swap, vnswap and zswap
[05JUN] Version 1.0 :
- Initial release

Downloads for AOSP
[19AUG] Version 1.8 (AOSP) :
- AOSP kernel based on TW GoogyMax source (same features & Stweaks support)
- No OC (causing problems for now)
- Activated Sswap
- Updated ramdisk to @RaymanFX latest AOSP build

Reserved 1

Reserved 2

Reserved 3

+1111111111111
googy kernel O_O
Wooooooow , welcome back

Best kernel!!!
Waiting...

Welcome !!! I wish the note 4 had the knock on/off feature ;p

Nice..happy to hear that..welcome

Finally...the best is back!! :thumbup:
And...subscribed!
°°° tapatalked °°°

Waiting for you.
Sent from my SM-N910C using Tapatalk

ToOoOOOOp

Nice will u include a U variant version?

Waiting
Enviado de meu SM-N910C usando Tapatalk

Finally...
---------- Post added at 05:05 AM ---------- Previous post was at 05:05 AM ----------
Any plan to make a rom? [emoji14]

Waiting soon, guys. I think, he released it today, coz it's works very awesome. Thanks for Anas, for this greatest work!!!!

Welcome Friend,
I have used your Siyah Kernel take-over and Go on developments on Galaxy S3 they were awasome. This is good news for Exynos comminity.
:good:

Excited. Good news.

Happy to see our exynos version growing !!!
I did a good decision to buy the n910c

[DISCONTINUED][KERNEL][OREO][MM/Nougat] Evolution Kernel [Falcon][2018/03/17]

Hi guys, I have proposed to make a kernel for the falcon and here they have it <3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Old builds:
http://pastebin.com/kDiQ8Hrr
Evolution Kernel -R6 build for MM Roms:
-Evolution_Kernel-R6 is unified for MM roms[/B], CM13/AOSP6/
- Linux code updated to lastest LineageOS source: 3.4.113
- Based on a new clean source for greater stability
- Compiled with LinaroTC 4.9 optimized cortex A7
- Many optimization for memory usage and reduce Lag
- Added TCP modes like westwood
- Lzma compression (very nice)
- No more useless mods
- Added SIO, VR, ZEN I/O schedulers
- Added toggles for wakelocks
- MSM Hotplug stable rules
- Powersuspend added and optimized
-Added Kcal v2 support
-DT2W/S2W features
-Selinux enabled in permissive mode by default
-WQ Power Efficient tweaks
-State notifier driver added
-Fix some memory leaks
-Many more optimizations for performance and battery saving (check source)
Important: use the kernel adiutor application to tune
Click to expand...
Click to collapse
Download:
https://www.androidfilehost.com/?fid=745425885120710252
**No mirrors please**
Click to expand...
Click to collapse
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
-Reboot and Enjoy :good:
Click to expand...
Click to collapse
New Build Evolution Kernel_R10, FOR NOUGAT ROMS 7.1.x ONLY, NO MARSHMALLOW
-
Linux code updated to lastest LineageOS source: 3.4.113 :good:
- Based on a new clean source for greater stability
- Compiled with latest simple GCC 4.8 (great for this) :good:
- Some optimizations for kernel compression (lzma)
- Many optimization for memory usage and reduce Lag
- Added Customs TCP
- Lzma compression (very nice)
- No more useless mods
- Added and improved SIO, SIOPLUS, VR, ZEN v2 I/O schedulers and default BFQ, etc...
- Row I/O scheduler is recommended by me :good:
- Added toggles for wakelocks
- MSM Hotplug stable rules (Nice deep sleep Now)
- Powersuspend updated (Use in Hybrid mode)
- Kcal v2 support
-Dt2w added but does not work for the moment (disable)
- Selinux enabled in permissive mode by default
- WQ Power Efficient tweaks
- State notifier driver added
- Lcd notify driver Removed (NO MORE START SCREEN FREEZE)
- New Governors added: zzmoove, Xperience by @TeamMex , Bioshock, Lionheart and ElementalX (testing)
- Interactive and Ondemand governor updated for better efficiency
- Added Sound Control v3.6
- Fast Charge enable by default
- Fix memory leaks for better perfomance
- Many more optimizations for performance and battery saving (check source)
- New TCP congestion driver called AsCaRex by @TeamMex Added
AsCaRex employs end-to-end bandwidth measurements to set cwnd and ssthresh after packet loss. The probing phase is as the original Reno, have a modified control mechanism for use with large congestion windows. A table indicates how much to increase the congestion window when an ACK is received.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Important: Use the kernel adiutor application to tune this kernel
Evolution Turbo Kernel Oreo Updated
-Kernel build with QUVNTNN 6.4 2018.01 Custom ToolChain
-Improved Cortex-A7 configs
-Improved XZ kernel compression
-def_config regenerate
-Updated cpufreq and gpu drivers configs for better performance
-Welcome again MP_Decision Hotplug
-Spinlocks changes
-Significant lag in oreo reduced
-Simple Adreno GPU algorithm added
-New governors distribution: Default govs, XPerience, SmartMax and BioShock govs
-Out DT2W for now
-All TCP cong is activated (AsCaRex default)
-Many more changes for you..
Source: https://github.com/willizambrano/android_kernel_motorola_msm8226
If you like, support me with a small contribution : http://paypal.me/willizambrano
Download: https://www.androidfilehost.com/?fid=962187416754469095
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
Backup of you stock boot.img
-Reboot and Enjoy :good:
If you like my work, contribute for more updates please:
Suggestions for balance perfomance/battery
-Use interactive gov with hispeedfreq on 787mhz and min freq 300mhz....
-For more conservative use Bioshock or SmartMax governor and min freq 300mhz
-Sheduler Maple, Row of BFQ
-In misc features select suspension mode on hybrid (default) and TCP select AsCaRex or westwood
Version Information
Status: Beta Evo Turbo for Oreo Roms
Release Date: 2018-03-19​

thanks for your work. i will give it a try and will feedback.

Looks promising. Gonna try it

ralp88 said:
thanks for your work. i will give it a try and will feedback.
Click to expand...
Click to collapse
Thanks bro, waiting you feedback

FortoszoneID said:
Looks promising. Gonna try it
Click to expand...
Click to collapse
Thanks , enjoy!

great piece of work

pico hackr said:
great piece of work
Click to expand...
Click to collapse
Thanks for you feedback

Running smoothly on crDroid 7.1 :good:

Can it be used with slim 7.1 ?

justbfree said:
Can it be used with slim 7.1 ?
Click to expand...
Click to collapse
Yeah, work on slim 7.1

Thanks for the work!
Keep it up
Will try and report
What is the expected SoT

willizambrano01 said:
Yeah, work on slim 7.1
Click to expand...
Click to collapse
It doesn't work , system UI FC .

Very good kernel :good:
I only miss DT2W feature..
Edit: @willizambrano01 i like your kernel, but i'm on latest CM14.1 nightly so i can't use data tethering with your kernel. Default CM kernel, tether working fine. Could you fix? Thanks

Aguys said:
Very good kernel :good:
I only miss DT2W feature..
Edit: @willizambrano01 i like your kernel, but i'm on latest CM14.1 nightly so i can't use data tethering with your kernel. Default CM kernel, tether working fine. Could you fix? Thanks
Click to expand...
Click to collapse
That wasn't Kernel problem. Tethering was broken in CM build itself. I think they have fixed in latest build.

Megatron27 said:
That wasn't Kernel problem. Tethering was broken in CM build itself. I think they have fixed in latest build.
Click to expand...
Click to collapse
But, I already on 12/10 build. With default CM kernel tethering working fine, with this kernel broken...

Can u add double tap to wake feature?

Aguys said:
But, I already on 12/10 build. With default CM kernel tethering working fine, with this kernel broken...
Click to expand...
Click to collapse
Thanks bro, I fix on next build

Allstargaurav said:
Can u add double tap to wake feature?
Click to expand...
Click to collapse
In next build bro

I'll try it soon, but which ROM do you recomend for me to use with, focusing in performance?

Best hotplug?

[EOL] [KERNEL][EAS][OC/nonOC][UV]KangarooX FINAL [2019-12-31][AOSP/MIUI][SPECTRUM]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The second round's time has come. I wanna present my kernel here. This kernel focuses on to be a good kernel. My motto is "I don't have motto".
Compatible ROMs:
Should work with all ROMs
Features:
Based on kernel.lnx.4.4.r37-rel CAF branch
Uptodate with latest linux kernel base
Compiled with GCC 8.3 with O3 and graphite opts
Many tracing, logging, debugging, security sh*t removed
EAS
Double tap to wake [Thanks to @vasishath]
Added a bunch of IO scheds( BFQ, tweaked maple, tweaked FIOPS, sio, anxiety)
Spectrum profiles support, can be switched with SmartPack kernel manager
KCAL support
Wakelock blocker (Thanks to @boeffla)
Added Adreno boost
WireGuard support
Headphones gain control
Microphone gain control
Best sound quality
32 bit up to 384 kHz audio playback support
DTS Headphone:X support
CPU OC to 1.8/2.2GHz
CPU/GPU UV
Xbox and PS controller support
HDR support for all whyred/wayne panels
exFAT, NTFS, F2FS support
sRGB support(you can find the custom control for smartpack in the extras folder)
Flashing instructions:
If you are using other custom kernel then at first dirty flash the ROM
Flash the kernel(OC or nonOC)
Flash the perfboost fw config module
If you experience brightness issues then flash the *255 version
Download link:
https://bit.ly/2JZLrwC
AFH mirror: https://www.androidfilehost.com/?w=files&flid=297054
Credits:
@frap129
@nathanchance
@AxelBlaz3
@Shekhawat2
@Ajmy_znr
@psndna88
@andip71
@xanaxdroid
@sultanxda
@YaroST12
@celtare21
@0ctobot
@tytydraco
@kdrag0n
@uvera
All the devs from whom i kanged
Source code:
https://github.com/ktommy91/kernel_xiaomi_sdm660.git
If you like what I made you can give some $ for my funeral:
https://www.paypal.me/ktommy91

Changelog:
r5.0:
- Rebased on kernel.lnx.4.4.r37-rel
- Built with GCC8.3 with O3 and graphite opts
- Dropped many useless stuff
- Kuran's new scheduler and locking backports added(1.1 in hackbench)
- ...See on github
r5.1:
- Linux 4.4.190 merged
- Scheduler improvements(thx to Kuran)
- Some reverted audio patches(better clarity)
- defconfig: disable vmstat event counters
- arm64: Select ARCH_HAS_FAST_MULTIPLIER
- treewide: remove some missed tracing
- Added the missed minimum brightness change option
- Added the missed HDR support
- ASoC: msm: Handle bit_width to configure ASM session for FLAC playback
- USB tethering fixed
- arm: dts: qcom: add the panel-ack-disabled property to whyred/wayne/tulip panels
r5.2:
- kernel-common/android 4.4 merged (Linux 4.4.192)
- Qcacld-3.0, fw-api, qca-wifi-host-cmn: LA.UM.7.2.r1-07500-sdm660.0 CAF tag merged
- Added the changes from LA.UM.7.2.r1-07500-sdm660.0 CAF tag
- f2fs: Set cp_interval to 30 secs and make it no-op
- drivers: input: touchscreen: nvt_touch_e7s & synaptics_dsx_e7s: Use FIFO
- nvt_touch_d2s: Use a FIFO thread for work processing
- ... see on github
r5.3:
- Linux 4.4.194 merged
- LA.UM.7.5.2.r1-03700-8x96.0 CAF tag merged
- added some missing changes from LA.UM.7.2.r1-07600-sdm660.0
- qcacld-3.0, fw-api, qca-wifi-host-cmn: LA.UM.7.2.r1-07600-sdm660.0 CAF tag merged
- sched: Import sched_irq_work_queue()
- cpufreq: schedutil: Queue sugov irq work on policy online cpu
- printk: silence healthd messages from userspace
- sched/fair: Don't assign runtime for throttled cfs_rq
- Revert "drivers: input: touchscreen: nvt_touch_e7s & synaptics_dsx_e7s: Use FIFO"

what is Kangaro spectrum injector
and what perfboost conf. do
plz clarify

Did you solve Huaxing panel problem because it was still in version 3.0 If you no longer take a consideration!

John Amin said:
what is Kangaro spectrum injector
and what perfboost conf. do
plz clarify
Click to expand...
Click to collapse
Spectrum injector is for the old GSIs, nowdays not really necessary. Perfboost fw config is EAS compatible config for the perfboost fw.

Frkanyldz said:
Did you solve Huaxing panel problem because it was still in version 3.0 If you no longer take a consideration!
Click to expand...
Click to collapse
Huaxing should work.

In the 2.6 version, this is not a problem, but other current kernels are still going black screen issue

I'd like to try this kernel, but bootloop always bother me..

delphinuz said:
I'd like to try this kernel, but bootloop always bother me..
Click to expand...
Click to collapse
Magisk and some modules bother you.(or the stalkers)

ktommy91 said:
Spectrum injector is for the old GSIs, nowdays not really necessary. Perfboost fw config is EAS compatible config for the perfboost fw.
Click to expand...
Click to collapse
what do you recommend as cpu gov. for 3giga ram whyred varient for optimum battery and performence without overclocking

works on miui?

Non UV versions are up, flash if you experience random freezes.

John Amin said:
what do you recommend as cpu gov. for 3giga ram whyred varient for optimum battery and performence without overclocking
Click to expand...
Click to collapse
Darktuil +512 MB zRAM
raptorddd said:
works on miui?
Click to expand...
Click to collapse
Should.

ktommy91 said:
Non UV versions are up, flash if you experience random freezes.
Click to expand...
Click to collapse
UV versions what is that

John Amin said:
UV versions what is that
Click to expand...
Click to collapse
under volt.

raptorddd said:
under volt.
Click to expand...
Click to collapse
do you mean not overclock

John Amin said:
do you mean not overclock
Click to expand...
Click to collapse
different thing. undervokt is voltage of cpu lowered so it consumes less power.. if too low it will reboot or freeze phone . if so flash the zip that says non UV
OC overclocked cpu get higher frequencies ..

ktommy91 said:
Non UV versions are up, flash if you experience random freezes.
Click to expand...
Click to collapse
Man you should've made non uv zip long time ago. I was having bootloop on your kernel since v2.0. If you would have made non uv verison back then. We would not have bootlooo problem. Everything is working perfectly now. No reboots.
One request can you make a ramdisk zip for setting schedutil governer as default like in insigniux where flashing it will make schedutil default cpu governor

raptorddd said:
different thing. undervokt is voltage of cpu lowered so it consumes less power.. if too low it will reboot or freeze phone . if so flash the zip that says non UV
OC overclocked cpu get higher frequencies ..
Click to expand...
Click to collapse
so what version you recommend safer non UV or normal

John Amin said:
so what version you recommend safer non UV or normal
Click to expand...
Click to collapse
I recommend non uv as uv one was causing bootloop