Related
I just got this screen protector in the mail today. Its really good so far, I would recommend it for everyone. It's not that thick, and it protects against scratches and scuffs. Only thing I don't like is it doesn't fit the whole area. What I mean by that is the black parts outside the screen isn't all covered up. But its still good. Heres the website. Cool thing too is they actually give you 2 screen protectors.
http://www.sgpstore.com/advanced_se...Csid=759c22591b3eb0f2ddda0347bfd9fcc3&x=0&y=0
I know its not tempered glass, but I just slapped one of these on, and I am very happy.
Originally had the UAG screen protector that came with my case, which was crap.
It does not cover the entire screen, but I cant even tell that I have a screen protector on my phone. It is invisible.
I bought the HD Clear.
For $3.99, you cant go wrong until a decent glass screen protector comes out.
NOT an affiliate link:
http://www.amazon.com/gp/product/B00MX25KJ4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I heard good things about this screen protector. Does it have glass feel? I have spartan glass protector on mine and has halo around the edges. Mind posting some pic?
With your finger it feels nice, not rubbery like the UAG that I had on prior. With the S-Pen, it definitely doesn't feel like glass. Using the pen, with every swipe you know its plastic.
I don't use the pen often, so this is not an issue for me.
The only camera I have is the phone that the protector is on, sorry.
I bought the same ones and they're a great deal even if the price was doubled.
What Plastic Screen Protectors are you using on the Note 4? I'm under the notion that typical PET film is compatible with most cases.
I got the Zagg HDX screen protector and I'm pretty happy with it. I was hoping for tempered glass, but I don't think that's going to happen any time soon. The HDX protector was easy to install and it feels great. No issues with s-pen making divots or marks so far (been about a week of use).
INITIALLY... like immediately after you put it on, it feels a bit "sticky" when you run a finger over it. Just clean it off though and it's fine. Must be some residual "sticktion" from the films that cover the film prior to install.
+1 for the Zagg HDX. It's more expensive, but well worth it. The glass protectors look funky on this phone, and you can barely tell the Zagg is on there except for the somewhat sharp edge. I usually go without a protector, but the Note 4 is VERY scratchable... I had several light scratches in the coating that could only be seen in the right light only after a few days of use, so I had to get the protector.
I can rest-assure you its very hard not to get even the tiniest scratch on the shiny metal portions of the Note 4 especially the first time you put the phone in a case. When buying new, the device jostles while in transit, and I've seen scratches in areas where no one will see; that's just me.
Is the HDX as thin as one of those cheap plastic screen protectors found on eBay?
The HDX is a little thicker than the cheap ones. It's a multi-layer construction and provides impact resistance. It's still thin and flexible enough that it handles the slight curve at the edge of the screen and doesn't halo or anything. AND... I'm using the Samsung case and it works with that perfectly.
I'm currently using the iCarez film protector and it does not fit with my Seidio Surface case because it's too thick. Has a bubble in the lower left corner I can't get rid of and when I put the phone in my Akron Mega Grip car mount the side arms cause a large bubble on the left side. Not sure how thick it is but hoping for better results with the Zagg HDX which is 1 mm thick. Also don't like S Pen feel with the iCarez film.
I've been using Spigen Steinheil screen protectors since I first got a Motorola OG Driod. The Steinheil have always been durable and protective of my screens. I have a Spigen Steinheil Crystal screen protector on my Note 4. It works well and doesn't interfere with the native screen. They come 3 in a pack.
Zagg hdx until my iloome shows up
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Thanks, moderators please close this thread or merge if applicable.
eksoccer99 said:
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Click to expand...
Click to collapse
TechMatte screen protectors are the best quality, and best value!
http://www.amazon.com/gp/aw/d/B00MX...SY200_QL40&dpPl=1&dpID=510dhI4oDpL&ref=plSrch
Are there any curved/wet install screen protectors that will fit round the curved edges of the S6 or is a glass one the way forward?
I am clumsy and outdoors lots so would want some proection and it seems a lot of the plastic protectors only just about cover the screen.
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Spigen screen protectors leave gaps around the border. Not as much as glass sp. This is to accommodate "case friendly" design.
HKSpeed said:
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Click to expand...
Click to collapse
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
JayX2A said:
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
Click to expand...
Click to collapse
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
HKSpeed said:
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
Click to expand...
Click to collapse
Not got the phone yet - was pre ordering bits! I don't mean the whole front of the phone. On the spigen website it shows the protector being slightly wider than the display, but review I read elsewhere seem to have it cut quite narrow and it barely covers the active part of the screen.
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
HKSpeed said:
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
Click to expand...
Click to collapse
Have the Fusion on my Nexus - pretty good but teh back is coming away from the sides now. Like the look of the Rinke slim though.
Got some Spigen ones, they are pretty close to the size of the screen. Have to be so careful to line it up properly! Shame they didnt make it that fraction bigger, but I guess that was not possible due to the screen curve.
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Duzzy5 said:
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Click to expand...
Click to collapse
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
benjmiester said:
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
Click to expand...
Click to collapse
Ordered a couple of super cheap 0.26mm ones that I found online.
https://www.replacebase.co.uk/samsu...or-0-2mm-ultra-clear-with-oleophobic-coating/
Arrived yesterday and look ok - will see how they go on and if there are any halo issues.
JayX2A said:
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
Click to expand...
Click to collapse
I have a SUPER thin tempered glass screen protector for the front and back of my s6. On the back it is quite large so it has the halo but on the front it is cut so it just about covers the actual display bit, so there is no halo on the front. It covers the samsung logo at the top and the capacitive buttons at the bottom like any other screen protector. Both costs me £2.49 on eBay UK. After using a much thicker tempered glass screen protector on my s3 I would say that the thicker ones feel as if they would offer better drop protection.
Can everyone post their screen protector and case combination that works (no peeling edges). A few combinations were mentioned in individual posts but it would be good to have them listed together. Post away!
Has anyone found a good screen protector for the Note 7 that works with either the Spigen Neo Hybrid case or Caseology Parallax series cases by chance?
How about a protector with either a Samsung S-view or Spigen S-view case?
Thank you for this thread. Was about to create a similar one.
I have a Note 7 on pre-order and want to ensure a screen protector + case is with me before it arrives. Have spent a few hours going through various threads looking a for good combo that works without the screen protector peeling from the edges.
Ideally, would like to buy a tempered glass protector and a clear case. Any suggestions, please?
Also, does the official Samsung clear case and screen protector work well together? If tempered glass is a no-go, that would be my fallback option till something better comes along.
I have the Spigen Ultra Hybrid and now thinking of ordering this https://www.amazon.co.uk/gp/product..._act_image_4?ie=UTF8&psc=1&smid=A7ZMMLW05YAY7
adhesive on top and bottom no on edges and it's size is case friendly. Still waiting for the UAG Cobalt
Good call on this topic!
Zagg
Justinphxaz said:
Has anyone found a good screen protector for the Note 7 that works with either the Spigen Neo Hybrid case or Caseology Parallax series cases by chance?
Click to expand...
Click to collapse
I went to the Zagg kiosk at the mall and they had made the Zagg Clear HD case friendly and I am currently using a Caseology Parallax with no issues. The screen protector is a good one!
kontithegreek said:
I went to the Zagg kiosk at the mall and they had made the Zagg Clear HD case friendly and I am currently using a Caseology Parallax with no issues. The screen protector is a good one!
Click to expand...
Click to collapse
Nice! So no edges of the screen protector are peeling up from the edges? My wife's got that one case too and her Skinomi Techskin screen protector is doing well, the protector is still on pretty well but there is a very slight peel on one edge but it's slight and sits back down for a few days if you push it back down. My Spigen Neo Hybrid case doesn't play well with my Skinomi Techskin screen protector. I've gotta find another screen protector that'll work.
Justinphxaz said:
Has anyone found a good screen protector for the Note 7 that works with either the Spigen Neo Hybrid case or Caseology Parallax series cases by chance?
Click to expand...
Click to collapse
I have a JETech tempered successfully paired with my Parralax.
JawjaBill said:
I have a JETech tempered successfully paired with my Parralax.
Click to expand...
Click to collapse
Sweet! I'll have to take a look at that protector!
Justinphxaz said:
Nice! So no edges of the screen protector are peeling up from the edges? My wife's got that one case too and her Skinomi Techskin screen protector is doing well, the protector is still on pretty well but there is a very slight peel on one edge but it's slight and sits back down for a few days if you push it back down. My Spigen Neo Hybrid case doesn't play well with my Skinomi Techskin screen protector. I've gotta find another screen protector that'll work.
Click to expand...
Click to collapse
Yeah so far I have no problems I switch between the parallax case and the spigen rugged armor and everything has been good. Zagg has always been a favorite of mine on all my phones and they will only set you back like 25.00.
Hope this helps!
Verizon tempered screen protector and Samsung brand LED case.
I have the JETech from amazon uk with Spigen neo hybrid crystal. Works perfectly have checked with multi touch test app and there is no problem with touch sensitivity anywhere. No sign of any halo or other video. problem.
Easy install just have to line up with touch key lights.
I'm using icarez screen film with choetech ultra thin hybrid case and it doesn't peel off the icarez since the bumper goes over a protector a bit and holds it down. Also got another thin tpu Myriann that works with it the same way. Tried spigen ultra hybrid and it sometimes will peel it off very slightly but a few adjustments and it's good again. With the ringke fusion hybrid case forget it. Peel galore!
icarez
https://www.amazon.com/gp/your-acco...5027466&returnSummaryId=&shipmentId=DnCYPJLLH
Choetech ultra thin hybrid
https://www.amazon.com/gp/your-acco...3825810&returnSummaryId=&shipmentId=D32VdG0wH
Myriann thin tpu
https://www.amazon.com/gp/your-acco...1067442&returnSummaryId=&shipmentId=DrfpbHW1H
Sent from my SM-N930T using Tapatalk
This combo worked perfectly for me....
Galaxy Note 7 Case, POETIC Affinity Series Premium Thin/No Bulk/Clear/Dual material Protective Bumper Case for Samsung Galaxy Note 7 (2016) Black/Clear
https://www.amazon.com/Affinity-Pre...&qid=1472782554&sr=8-1&keywords=poetic+note+7
and
Official Samsung Galaxy Note 7 Screen Protector - Twin Pack
http://www.mobilefun.com/60374-official-samsung-galaxy-note-7-screen-protector-twin-pack.htm
No lifting of those Samsung screen protector on sides nor top and bottom on that Poetic case. I tried it on a SUPCASE Unicorn Beetle and they did lift up, so had to return that case.
MKchrias said:
I have the JETech from amazon uk with Spigen neo hybrid crystal. Works perfectly have checked with multi touch test app and there is no problem with touch sensitivity anywhere. No sign of any halo or other video. problem.
Easy install just have to line up with touch key lights.
Click to expand...
Click to collapse
Adheres the glass over the whole area? Or only the top and bottom from the jtech glass?
The Samsung oem clear case is working very well. Comfortable and feel solid. Better than the s6 s view case that I had that broke easily.
I will prefer a tempered glass but unfortunately none is good. Currently using oem Samsung SP. Affordable. Fit well at the edge. But can see lines over it after scratch and using s pen. But that's the purpose to protect the screen right