hey anyone out there who can help me, i recently hard bricked my phone long story short didnt follow the instructions as stated and well what do yu know my AT&T Samsung Galaxy S2 Skyrocket wont boot up, tried every little thing that could bring back my phone but its Hard bricked, its not like soft brick where you can fix it using stock rom and odin or just a restore from CWM/TWRP Recovery Nandroid Backups
anywz the point is how do does the whole thing work "mobiletechvideos" jtag repair
any kind of thing culd be helpful i just need my awsome phone back
Search thread reported this has been discussed and its in the wrong section
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
If its hard bricked, you basically answered your own question. Mobiletechvideos is your best bet. Well known for their work. Look em up and it'll cost you 50$.
Sent from my Nexus 7 using XDA
You send phone, they fix it, you profit. Easy as that
Sent from my Slimmed out Skyrocket
will do that
bps119 said:
You send phone, they fix it, you profit. Easy as that
Sent from my Slimmed out Skyrocket
Click to expand...
Click to collapse
will surely do that, money is not a problem just have to send it this weekend and off to mobiletechvideos, hope they get it fixed as you guyz said
winosxbuntu said:
will surely do that, money is not a problem just have to send it this weekend and off to mobiletechvideos, hope they get it fixed as you guyz said
Click to expand...
Click to collapse
I just do Jtag service for $25. Please check my feedback.
tomy1986.nt said:
I just do Jtag service for $25. Please check my feedback.
Click to expand...
Click to collapse
No thanks
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I am sure you will be pleased with them. For $50, they bring your phone back from the dead.
I have hard bricked a phone before (my wife's Note) and got it back from them in less than a week. One of the new criteria I have for when I buy a new phone is that mobiletechvideo has a jtag service for it already.
should i root, again since i fcked my first phone
my Galaxy S2 is still bricked but i got the AT&T SAMSUNG GALAXY S3 I747 on 4.1.1 instead cost $$300 on ebay :laugh:
the results came better than i expected by gettin myself a new smartphone but comin back here on XDA reminds me of how i completely turned my sphone into a paper-weight by just installing a new ROM/ROOTIN
should i go back to the ROOTIN wagon? iknow the risks and goods that comes with it but android stock w/touchwiz is not that bad
winosxbuntu said:
my Galaxy S2 is still bricked but i got the AT&T SAMSUNG GALAXY S3 I747 on 4.1.1 instead cost $$300 on ebay :laugh:
the results came better than i expected by gettin myself a new smartphone but comin back here on XDA reminds me of how i completely turned my sphone into a paper-weight by just installing a new ROM/ROOTIN
should i go back to the ROOTIN wagon? iknow the risks and goods that comes with it but android stock w/touchwiz is not that bad
Click to expand...
Click to collapse
It's really easy, if you find that you need features you can only use when rooted/on a custom rom then go ahead.
If you don't find yourself thinking "that custom feature would be of some real use now" then there's no reason to "go back to the ROOTIN wagon"..
Finally, some friendly advice :angel:, if you intend to start modding your phone please read the goddamn instructions this time around. :highfive:
I've had 3 samungs and 1 sony, and never once did I not read the bloody instrufuctions, and you know what?
Never did I soft or hard brick any of them, thanks to God's gift of literacy. :victory:
lingowistico said:
It's really easy, if you find that you need features you can only use when rooted/on a custom rom then go ahead.
If you don't find yourself thinking "that custom feature would be of some real use now" then there's no reason to "go back to the ROOTIN wagon"..
Finally, some friendly advice :angel:, if you intend to start modding your phone please read the goddamn instructions this time around. :highfive:
I've had 3 samungs and 1 sony, and never once did I not read the bloody instrufuctions, and you know what?
Never did I soft or hard brick any of them, thanks to God's gift of literacy. :victory:
Click to expand...
Click to collapse
thanks, i needed that plus am gonna root my phone this week
bps119 said:
You send phone, they fix it, you profit. Easy as that
Sent from my Slimmed out Skyrocket
Click to expand...
Click to collapse
I sent my phone to them and fixed it like it was nothing but I was quite surprised to find out that it was a bad EMMC CHIP failure which blacked out my phone with no sign of life.............
Thanks xda
sent from Samsung Galaxy S3 i747 Synergy Rom 4.1.2 w/ Ziggy Kernel
using XDA Premium
tomy1986.nt said:
I just do Jtag service for $25. Please check my feedback.
Click to expand...
Click to collapse
i need jtag service for my htc one mini
lingowistico said:
It's really easy, if you find that you need features you can only use when rooted/on a custom rom then go ahead.
If you don't find yourself thinking "that custom feature would be of some real use now" then there's no reason to "go back to the ROOTIN wagon"..
Finally, some friendly advice :angel:, if you intend to start modding your phone please read the goddamn instructions this time around. :highfive:
I've had 3 samungs and 1 sony, and never once did I not read the bloody instrufuctions, and you know what?
Never did I soft or hard brick any of them, thanks to God's gift of literacy. :victory:
Click to expand...
Click to collapse
same as me never had problem with roms or a bricked device
Related
I was trying to return my phone to stock using odin. I was using the konane tar and instead of pushing PDA I pushed PIT and hit start. After it was done flashing my samsung skyrocket turned off will not turn on at all and when i connect it to my computer it is not recognized by odin at all. It is only recognized by my computer as QHUSB_DLOAD but nothing else. Can someone please help me or direct me to the right person. Thank you
Its hard bricked. Jtag or samsung warranty to fix
what is jtag? and where do i find it?
marcos1012 said:
what is jtag? and where do i find it?
Click to expand...
Click to collapse
It's a place you have to send it to get fixed
http://mobiletechvideos.mybigcommerce.com/
its that the only two options that i have? and for jtag would it be considered a samsung galaxy s 2...even though mine is also skyrocket?
marcos1012 said:
its that the only two options that i have? and for jtag would it be considered a samsung galaxy s 2...even though mine is also skyrocket?
Click to expand...
Click to collapse
Yes, it's toast, those are the only options.
No, it's a skyrocket, he fixes those too
thank u sir i appreciate your help very much. I am glad there is people like you in this forum
marcos1012 said:
thank u sir i appreciate your help very much. I am glad there is people like you in this forum
Click to expand...
Click to collapse
It should be about $50 from him
Umm I don't know what carrier your with or if you are still in your warranty time frame or have mobile phone insurance? But when I first started flashing phones I bricked a captivate after having it for only a couple of months so I called att and told them I was updating the phone using kies mini as directed and the power blinked and screwed the phone up. So they never questioned me they just sent me a new captivate.. I was lucky cause that was about the time the froyo update came out so they never questioned me just said that's happened to a lot of people. So with gingerbread updates rolling out tell them you were updating and the phone cut off and won't come back on. Its worth a try. I know a lot on here that has done it...
Sent from my SAMSUNG-SGH-I727 using xda premium
if its an AT&T skyrocket call AT&T warranty and get them to send a replacement in the mail or go to your local DSC if you have one and they will replace it there to
So im guessing i bricked my s3 verizon.. the phone wont completley turn on I rooted and tried to put on a jelly bean rom and found out that I put the wrong one on meaning I put a GSM instead of a CDMA which is my fault because I never payed attention to it.. Any solutions for this problem?
Battery pull did not work
Charging it did not work
The phone completley will not turn on no way to get into download mode or whatever so I need help thanks.
I haven't kept up as much in recent days but what I heard in the past was that flashing an international ROM was close to a death sentence since you end up in a qualcomm diagnostic mode with no download mode. I have no idea if there has been any changes, updates, or progress made in this regard or if a USB jig will help you. I would imagine a JTAG would still be useful. You might want to try on IRC.
Also, this is not development and does not belong here. The rules clearly state that. Many bad things can be avoided by taking the time to read.
ameno13 said:
So im guessing i bricked my s3 verizon.. the phone wont completley turn on I rooted and tried to put on a jelly bean rom and found out that I put the wrong one on meaning I put a GSM instead of a CDMA which is my fault because I never payed attention to it.. Any solutions for this problem?
Battery pull did not work
Charging it did not work
The phone completley will not turn on no way to get into download mode or whatever so I need help thanks.
Click to expand...
Click to collapse
Try Purchasing a jig to get it in download mode
ameno13 said:
thanks for the help..
Click to expand...
Click to collapse
Ameno fr what ive read theres different ways of brick education some more severe than others but fr my understanding when ur phone doesn't want to come on thats a hard brick and not to bring u down but yea i believe that phone is done, i would just tell verizon u took an update and after the update it just wouldnt start cuz how would they is rooted if it wont come on for them to find out
Flip35 said:
Ameno fr what ive read theres different ways of brick education some more severe than others but fr my understanding when ur phone doesn't want to come on thats a hard brick and not to bring u down but yea i believe that phone is done, i would just tell verizon u took an update and after the update it just wouldnt start cuz how would they is rooted if it wont come on for them to find out
Click to expand...
Click to collapse
its not done...jtag will fix it.
Apparently nobody read the 1st reply to the question. :silly:
droidstyle said:
its not done...jtag will fix it.
Click to expand...
Click to collapse
what is jtag? i would like to know, i never heard of it and who knows if i ever run into that issue
Flip35 said:
what is jtag? i would like to know, i never heard of it and who knows if i ever run into that issue
Click to expand...
Click to collapse
Orignal Galaxy S links but you'll get the idea of what a JTAG is from these:
http://www.xda-developers.com/android/jtag-your-captivate-god-like-soldering-skills-not-required/
http://www.youtube.com/watch?v=T7edUXE7jLg
bobloblaw1 said:
Orignal Galaxy S links but you'll get the idea of what a JTAG is from these:
http://www.xda-developers.com/android/jtag-your-captivate-god-like-soldering-skills-not-required/
http://www.youtube.com/watch?v=T7edUXE7jLg
Click to expand...
Click to collapse
Thanx man
Sent from my SCH-I535 using Tapatalk 2
bobloblaw1 said:
Apparently nobody read the 1st reply to the question. :silly:
Click to expand...
Click to collapse
I did, was just confirming what you had already said :good:
Spoke with Verizon and they'll replace it for me...should have been more careful, I flashed the GSM version of a rom after rooting. JTAG looks like it's quite difficult though. I'd only do it if Verizon told me to take a walk...Anyways thanks for the responses, and always remember: practice safe flashing!
And now my Galaxy S2 i727 won't turn on or boot into download mode. I was told getting a jig may fix it but if my phone won't turn on would I be able to use a jig?
Is there any way to make my phone functional again or am I out of luck?
well that was stupid lol. sorry bud you might be able to jtag it but idk good luck
Yeah, you're hard-bricked. A jig would almost certainly be a waste of time and money. Send it to the jtag guy for $50 or buy a new one, maybe try to warranty it out through Sammy if you want to risk them finding out that you'd been flashing and broken the warranty.
Not to rub salt in the wound or anything, but had you paid close attention and read before flashing, you'd have noticed that you were about to flash an SGS2 kernel onto a SR, and riding full-speed on the train to Bricksville.
kinghaf said:
And now my Galaxy S2 i727 won't turn on or boot into download mode. I was told getting a jig may fix it but if my phone won't turn on would I be able to use a jig?
Is there any way to make my phone functional again or am I out of luck?
Click to expand...
Click to collapse
thats why the last part of my sig says what it says.
the 1st link in my sig has a link for brick repair, but first try to get it fixed under warranty, just say that it wont turn on anymore and act dumb about flashing...which is not to far from the truth
Smh.....another one bites the dust this is why I get so angry nobody takes time to learn about their $400+ device but then we are supposed to help them fix it..... my faith in the ability of our society to learn is dead I can't wait to see what happens when these generations get older
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Least people are predictable...? I swear even the posts are almost the same word for word each time this happens... :cyclops:
vincom said:
act dumb about flashing...which is not to far from the truth
Click to expand...
Click to collapse
Hahaha...good one vincom
Alright thanks for the help. I'll try getting it replaced first. Is mobiletechvids a reputable place? I don't want to get scammed.
kinghaf said:
Alright thanks for the help. I'll try getting it replaced first. Is mobiletechvids a reputable place? I don't want to get scammed.
Click to expand...
Click to collapse
Yes, and just leave your phone alone from now on if you don't wanna read and understand what your're doing first.
s2-i777 JB rom
Can i use s2-i727 i.e. sky rocket's rom for flashing my Galaxy S2-i777 (AT&T)..??? If not then can ny1 pls send me the link for correct rom..
kaymaddy said:
Can i use s2-i727 i.e. sky rocket's rom for flashing my Galaxy S2-i777 (AT&T)..??? If not then can ny1 pls send me the link for correct rom..
Click to expand...
Click to collapse
Seriously? You are asking this?
kaymaddy said:
Can i use s2-i727 i.e. sky rocket's rom for flashing my Galaxy S2-i777 (AT&T)..??? If not then can ny1 pls send me the link for correct rom..
Click to expand...
Click to collapse
No. Look in the correct section of this forum
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Unless you wanna hardbrick it then u gotta jtagg it not funny
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
intelxtreme said:
Unless you wanna hardbrick it then u gotta jtagg it not funny
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Little slow on the response time there wouldn't you say?…
-------------------------------------------------
Sent from my Skyrocket i727 running Slim Bean
-----------Nexus 7 running AOKP M1-----------
Not to be an advocate of noobs... i was kinda confused at first too. BUT never took rooting and flashing as a joke so I read and read... took me a week or so before rooting (already reading up on skyrocket and S2 prior to purchase though) and more than 6 months of reading before flashing Embryo 6.
Rooting is the new cool aid... wish some people will quit trying to be cool and really understand what they are doing. Most noobs just wants to brag that they have a custom rom as though it elevates their standing in life. Geeez.
Illnevertell said:
Smh.....another one bites the dust this is why I get so angry nobody takes time to learn about their $400+ device but then we are supposed to help them fix it..... my faith in the ability of our society to learn is dead I can't wait to see what happens when these generations get older
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Biggs u just mad and not everyone is at the same level u think you
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
don728871 said:
Biggs u just mad and not everyone is at the same level u think you
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
You quoted a dude who left. Second he is right so many of these new guys don't research and just jump in the shiz thinking they are [email protected] . Third sentence structure son let's learn English please I almost didn't understand that at all.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
kinghaf said:
And now my Galaxy S2 i727 won't turn on or boot into download mode. I was told getting a jig may fix it but if my phone won't turn on would I be able to use a jig?
Is there any way to make my phone functional again or am I out of luck?
Click to expand...
Click to collapse
JTAG repair will fix your phone...
http://www.ebay.com/itm/160955490053?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Racing19969 said:
JTAG repair will fix your phone...
http://www.ebay.com/itm/160955490053?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Click to expand...
Click to collapse
Way to respond to something from 5 months ago when he received the exact same answer in the very first response.
------------------------------------------------------------------------
Sent from my Skyrocket i727 w/ Blinky'sRevenge
-----------------Nexus 7 running AOKP M1-----------------
Very similar http://forum.xda-developers.com/showthread.php?t=1838832
My S3 had a failed install and now the screen won't turn on. If i can get it to connect to Odin then i can fix it, but i can't. One of the people on the other similar thread said to PIT it? It makes a noise when i plug it into the computer, it just doesn't pick up in Odin. Really need some help here it's the verizon SCH 1535. Taking any suggestions
How was your install failed? What were you trying to do?
Zalithian said:
How was your install failed? What were you trying to do?
Click to expand...
Click to collapse
I was trying to install a new rom. I was on stock and it started installing but then it said something was wrong with the zip. So i hit reboot phone and it went straight to where its at now
kylewiddz said:
I was trying to install a new rom. I was on stock and it started installing but then it said something was wrong with the zip. So i hit reboot phone and it went straight to where its at now
Click to expand...
Click to collapse
I meant which rom . It's kind of important.
Zalithian said:
I meant which rom . It's kind of important.
Click to expand...
Click to collapse
Oh crap... It's Criskelo I downloaded it on my phone and I can't remember exactly if i got the one for the sch 1535
(also I have to wait 5 minutes between each post because im new...)
kylewiddz said:
Oh crap... It's Criskelo I downloaded it on my phone and I can't remember exactly if i got the one for the sch 1535
(also I have to wait 5 minutes between each post because im new...)
Click to expand...
Click to collapse
You can only flash ROMS made for YOUR SPECIFIC MODEL. Just because it's a Galaxy S3 ROM doesn't mean it's okay on your phone. You need one for your specific version. I don't know what Criskelo is, but I have never head of it.
A quick search pulled up this:
Criskelo ROM for Rooted Galaxy S3 i9300!
If you want to know which ROM I am running on my Galaxy S3 GT-i9300 right now, it’s this Criskelo ROM. (PLEASE DO NOT FLASH THIS ROM ON U.S. or Canadian Galaxy S3s! PLEASE!)
If you did indeed flash an international ROM on your phone, it's probably a paper weight at this point. Go to mobiletechvideos and spend $60 to get it jtagged. Do some research before flashing next time.
Zalithian said:
You can only flash ROMS made for YOUR SPECIFIC MODEL. Just because it's a Galaxy S3 ROM doesn't mean it's okay on your phone. You need one for your specific version. I don't know what Criskelo is, but I have never head of it.
A quick search pulled up this:
Criskelo ROM for Rooted Galaxy S3 i9300!
If you want to know which ROM I am running on my Galaxy S3 GT-i9300 right now, it’s this Criskelo ROM. (PLEASE DO NOT FLASH THIS ROM ON U.S. or Canadian Galaxy S3s! PLEASE!)
If you did indeed flash an international ROM on your phone, it's probably a paper weight at this point. Go to mobiletechvideos and spend $60 to get it jtagged. Do some research before flashing next time.
Click to expand...
Click to collapse
SHIIIZZZ i see that now... I just want some clarification on that other thread i posted about it said that a PIT would work? Is there anyway to get that for a stock sch1535? I think thats my last hope as it sounds... also thank you for helping i totally didn't realize what i was doing til now... hindsight
kylewiddz said:
SHIIIZZZ i see that now... I just want some clarification on that other thread i posted about it said that a PIT would work? Is there anyway to get that for a stock sch1535? I think thats my last hope as it sounds... also thank you for helping i totally didn't realize what i was doing til now... hindsight
Click to expand...
Click to collapse
I'm pretty sure most international roms make a dometic S3 completely unbootable. I don't think you can even boot into ODIN to flash anything. Looks like you've tried. I don't think a PIT file will help, especially if you can't make it into ODIN to flash.
Zalithian said:
I'm pretty sure most international roms make a dometic S3 completely unbootable. I don't think you can even boot into ODIN to flash anything. Looks like you've tried. I don't think a PIT file will help, especially if you can't make it into ODIN to flash.
Click to expand...
Click to collapse
Im gonna throw up... I'll fiddle with it. that pit thing sounded like it would pull it up though i just can't find a download for it. I think my lucks run out on rooting... thanks for the help though
http://forum.xda-developers.com/showpost.php?p=30618458&postcount=57
32GB pit if you have 32GB S3. But not sure how you'll flash it without ODIN.
Questions go in Q&A
Thanks
Thread Moved
Zalithian said:
http://forum.xda-developers.com/showpost.php?p=30618458&postcount=57
32GB pit if you have 32GB S3. But not sure how you'll flash it without ODIN.
Click to expand...
Click to collapse
16gb... I still messed with Odin but no go. I bought a JIG though A red light does come on when i plug it in with no battery, hopefully this will work.
http://dl.dropbox.com/u/8949252/sch-i535-16gb.pit
16GB PIT
Zalithian said:
http://dl.dropbox.com/u/8949252/sch-i535-16gb.pit
16GB PIT
Click to expand...
Click to collapse
Wow thanks man you're on the ball. alas, I fiddled with this one as well for a bit still a dud
kylewiddz said:
Wow thanks man you're on the ball. alas, I fiddled with this one as well for a bit still a dud
Click to expand...
Click to collapse
I figured as much. I'm pretty sure you'll need to get it JTAGGED. Mobile Tech Videos is a reliable vendor for this, and the only one I know if. Wouldn't trust anyone on ebay.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Zalithian said:
I figured as much. I'm pretty sure you'll need to get it JTAGGED. Mobile Tech Videos is a reliable vendor for this, and the only one I know if. Wouldn't trust anyone on ebay.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Click to expand...
Click to collapse
So I bought a JIG whatever that is... do you think that I should wait for it to get here It seemed like in a video i watched it pulled up download mode immediately I'd hate to drop 60 bucks just to find out my 5 dollar fix would have worked.
Kylewiddz, that 32Gb PIT file previously mentioned was mine. Hate to break it to you, but it sounds like you'll need a JTAG to bring you back. If you wanna try the jig, sure, give it a shot. Even if it doesn't work, with this particular bork, they do work and they're nice to have around. Either way, Josh at the aforementioned MobileTechVideos.com is the bomb. $60 is better than buying a new phone (or committing fraud by taking it back for warranty). Good luck, buddy (make sure you learn something from this ).
Sent from my SCH-I535 using xda app-developers app
letinsh said:
Kylewiddz, that 32Gb PIT file previously mentioned was mine. Hate to break it to you, but it sounds like you'll need a JTAG to bring you back. If you wanna try the jig, sure, give it a shot. Even if it doesn't work, with this particular bork, they do work and they're nice to have around. Either way, Josh at the aforementioned MobileTechVideos.com is the bomb. $60 is better than buying a new phone (or committing fraud by taking it back for warranty). Good luck, buddy (make sure you learn something from this ).
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
The website looked really good, but the 60 dollar price tag is just enough to make me wait for the jig to get here. But if (most likely when) that doesn't work, they'll be gettin my business for sure. Moral of the story: I'm an idiot Thanks to everyone who helped
kylewiddz said:
Moral of the story: I'm an idiot
Click to expand...
Click to collapse
At least you realize that hope you can get it fixed. Make sure you read, read, read before you flash.
And read it again after you read it the first 3 times.
mustbepbs said:
At least you realize that hope you can get it fixed. Make sure you read, read, read before you flash.
And read it again after you read it the first 3 times.
Click to expand...
Click to collapse
Yeah, it's a hard lesson to learn when you've had the phone for less than a week:crying: The jig said 15 days to ship so I said screw it and just got my order done on the previously mentioned website. It was phone or Resi 6... anyways feeling much better about the whole situation knowing that I'll be up and running sometime in a week. (I came from the droid x which to my knowledge there is only one droid x type of rom, the whole multiple types of S3 that there are just went right over my head till I did some heavy reading post mortem:crying Also I feel like I can't over state the whole :crying: thing haha oh well
Hey everyone....
As some of you might know...I've got an Infuse with a broken MicroUSB port.....so I called my provider and they are sending me a replacement....I heard sometimes they would send Skyrockets but the guy on the phone informed me I'll be getting a refurbished Infuse which I already have...
Now here's my issue...
I'm rooted running ZEUS....Love the Rom but now I can't go back to stock because I can't sync.....so....any advice on how to brick the damn thing so they don't find out?
th3ju99anaut said:
Hey everyone....
As some of you might know...I've got an Infuse with a broken MicroUSB port.....so I called my provider and they are sending me a replacement....I heard sometimes they would send Skyrockets but the guy on the phone informed me I'll be getting a refurbished Infuse which I already have...
Now here's my issue...
I'm rooted running ZEUS....Love the Rom but now I can't go back to stock because I can't sync.....so....any advice on how to brick the damn thing so they don't find out?
Click to expand...
Click to collapse
flash the zip i attached in cwm. will give you hard-brick, not even samsung logo will come up. keep in mind though once you flash this your phone WLL NOT cut on again.
blscallions said:
flash the zip i attached in cwm. will give you hard-brick, not even samsung logo will come up. keep in mind though once you flash this your phone WLL NOT cut on again.
Click to expand...
Click to collapse
Nice!
Infuse Cyanide
OP we are just gonna close this up, and walk away... PM user if further assistance is required.
Thank you & Thread closed.
View attachment 1397476
Sent from me, using Forum Runner.