Hey
I took off the plastoc cover that had about the screen and NFC features.
But to the left of the speaker (Not the screen, hust before the phone curves) it looks like when you put a screen protector on and its not pushed down enough. It looks lights than the rest of the phone.
Anyone else got that
Related
Yes, I am a dumbass. I scratched the screen of my Fuze. I know all about screen protectors as I have an InvisibleSHEILD on order - shipped today, ironically enough.
And the screen protector it came with is a POS that would never stay on.
Anyway, I have a minor scratch in the screen - you can't feel it, but can see it if you hold the phone at the right angle. Is this fixable without replacing?
I have read things like toothpaste, Son Of A Gun car wax, CD ROM scratch repair, etc. Anyone used any of these with any luck?
put on a screen protector and the scratch will be less noticable. For now, until you IS arrives, put some clear packaging tape over the screen.
Came today from Play.
It is very odd has a cut out at top left (as if something underneath the glass requires a clear "signal") and a hole cut for the LED to shine through.
All in all a bit strange for £5 for 2.
Does it effect the screen quality in anyway? And does it help with fingerprints? I'm looking to get a new screen protector cos the one I got reduces screen quality by too much. (hint: avoid the forever fitters screen protectors!)
-------------------------------------
Sent from my HTC Desire
I just bought one recently and it's still shipping. Hope it won't reduce the screen sensitivity by too much. It's already perfect by default.
Sent from my HTC Desire
al89nut said:
Came today from Play.
It is very odd has a cut out at top left (as if something underneath the glass requires a clear "signal") and a hole cut for the LED to shine through.
All in all a bit strange for £5 for 2.
Click to expand...
Click to collapse
The proximity sensor and the ambient light sensor is to the left of the HTC logo.
Proximity sensor?
al89nut said:
Proximity sensor?
Click to expand...
Click to collapse
It's what turns the screen off when you hold the phone to your ear during a phone call, and what turns it back on when you bring the phone back down.
Take my advice. Do NOT buy this screen protector. I have just tried to fit two and failed both times. £5 vanished.
Why?
It is what I'd call a literal fit - in other words there is no margin between the protector and the actual screen. That makes it almost impossible to get right first time - and as you will know, with a screen protector, first time is best. The protector will almost certainly overlap the screen microscopically, riding up at the edge, leaving air pockets you won't be able to get out. Take if off to apply again and hello dust.
It also seems to be much more prone to bubbling than the non HTC one I'd put on before. Wish I'd left it on.
Am considering not bothering since I have an HTC case and it is glass not plastic.
But bloody annoying.
Has no one else noticed the little circle thing in the top left ish of the device??
First time i saw it i thought it was a camera but obviously isn't.
Then thought maybe it used for auto brightness or something like that?
its in the top left, in line with the htc logo, about a cm in from the left.
Have to have the screen off, and look very close.
Read the thread - proximity sensor apparently
al89nut said:
Take my advice. Do NOT buy this screen protector. I have just tried to fit two and failed both times. £5 vanished.
Why?
It is what I'd call a literal fit - in other words there is no margin between the protector and the actual screen. That makes it almost impossible to get right first time - and as you will know, with a screen protector, first time is best. The protector will almost certainly overlap the screen microscopically, riding up at the edge, leaving air pockets you won't be able to get out. Take if off to apply again and hello dust.
It also seems to be much more prone to bubbling than the non HTC one I'd put on before. Wish I'd left it on.
Am considering not bothering since I have an HTC case and it is glass not plastic.
But bloody annoying.
Click to expand...
Click to collapse
Exactly my experience too, I couldn't have put it better myself. Waited two months for this POS.
I think the only real solution is trim it on one side very slightly....
Just put mine on today too. Most unimpressed compared to the cheap pack of 6 from Germany. Fingerprint magnet and difficult to clean them off. I had to put the second one on straight away too, due to the fit, but considering putting one of the cheap ones back on!
AVOID.
Exactly so. That's what I've done
(There's plenty of guides to help you replace your screens out there...so I would redo one of those.)
Ive replaced a few of these S3 screens with new glass and the double sided tape method and the only issue that always happens is that the glass will touch the digitizer in the middle once in awhile. This registers a touch that is stuck on and locks up the rest of the touch screen. The only work around is pressing on the glass around the outside of the lcd to release the unwanted touch. Tonight I discovered a great method for curing that problem. I removed the glass and cleaned up very well. Then applied a cut down screen protector for a LG spectrum to underside of the glass to bridge the gap between the glass and the digitzer. (The spectrum protectors was big enough to trim down to the right size) Retaped and assembled. This has worked perfect to correct and the screen looks great! Make sure to buy a screen protector that is clear. A protector that is anti-glare would dim the display. With the clear you cant tell its there. The touch screen acts like new. Very happy with the results!!
Dan
Hogan1975 said:
(There's plenty of guides to help you replace your screens out there...so I would redo one of those.)
Ive replaced a few of these S3 screens with new glass and the double sided tape method and the only issue that always happens is that the glass will touch the digitizer in the middle once in awhile. This registers a touch that is stuck on and locks up the rest of the touch screen. The only work around is pressing on the glass around the outside of the lcd to release the unwanted touch. Tonight I discovered a great method for curing that problem. I removed the glass and cleaned up very well. Then applied a cut down screen protector for a LG spectrum to underside of the glass to bridge the gap between the glass and the digitzer. (The spectrum protectors was big enough to trim down to the right size) Retaped and assembled. This has worked perfect to correct and the screen looks great! Make sure to buy a screen protector that is clear. A protector that is anti-glare would dim the display. With the clear you cant tell its there. The touch screen acts like new. Very happy with the results!!
Dan
Click to expand...
Click to collapse
interesting. i have recently replaced my S3 with the prokit from amazon, but had occasional touch issues like you described. i might try this. to be clear, with the screen protector, do you still need to apply any adhesive between screen and digitizer?
cowboybebop98 said:
interesting. i have recently replaced my S3 with the prokit from amazon, but had occasional touch issues like you described. i might try this. to be clear, with the screen protector, do you still need to apply any adhesive between screen and digitizer?
Click to expand...
Click to collapse
No you do not need adhesive/loca between ur screen and digitizer. BTW I've went down that road with using the adhesive...not very fun. The UV glue method is tough to apply correctly. That is why I was experimenting with the under glass screen protector method.
One more add on to my description of adding the screen protector between glass and digitizer is doubling up on the double sided tape around the perimeter. I wanted to make sure I got the tape high enough to bridge the slightly larger gap between the glass/digitizer due to the screen protector. Hope this helps.
maybe not the perfect solution....
The wifes phone that I tried this fix on is working awesome. She said it hasnt had one issue since. But I've tried this method on two other S3 without the same sucess. Both were the US Cellular verisons of the phone (wifes is Verizon), and both still had touch screen lockups. So had to redo with the LOCA replacement method to cure issues. Just FYI...
Since last week I was noticing bubble /color peeling off from inside near left top on my screen, I ignored in the beginning, I had tempered glass installed that's why I didn't notice much , but I removed tempered glass to see what happened and it seems weird. Attaching images please tell me if anyone can figure out why this happened and if I need to worry for display.
* it's from inside, not outside.
My screen started to peel off. Mine is below the home button and is getting worse i just dont have the time and money to replace the screen. But it sucks. See video below its the same as that.
https://youtu.be/Qw7hQ6FruIM
So when I make a call on speaker phone, the screen goes black. I have to hit the power button to wake it up.
Is this supposed to happen?
Is there a way to keep it from going to black screen?
phillymade said:
So when I make a call on speaker phone, the screen goes black. I have to hit the power button to wake it up.
Is this supposed to happen?
Is there a way to keep it from going to black screen?
Click to expand...
Click to collapse
Just tested that out and it happened to me as well. Do you have the tempered screen protector on?
No screen protector, just a case. So I took off the case and just for fun, I cleaned the top of the device. Ear piece, front camera and all the glass.....low and behold, it now works as it should. Guess the proximity sensor was dirty. :victory:
phillymade said:
No screen protector, just a case. So I took off the case and just for fun, I cleaned the top of the device. Ear piece, front camera and all the glass.....low and behold, it now works as it should. Guess the proximity sensor was dirty. :victory:
Click to expand...
Click to collapse
I just took my screen protector off and no more problems either.