Database Info

I need an easier guide...

To outline my situation, I have installed CWM to my phone, and flashed version 2.5.1.2 of Galaxy S i9000 (but the recovery boot doesn't show as CWM) on a Samsung InFuse 4G (this part I managed to find by scouring the forums) with Firmware version 2.2.1, Kernel 2.6.32.9, with Build FROYO.UCKH1. This is as far as I have gotten because I cannot seem to get a backup of my phone's ROM made. So, my question is can someone explain (without jargon, I haven't quite learned it yet) in simple steps how to resolve this issue and help me continue my way to flashing a custom ROM? I've checked and read so many other guides, but they are confusing because the steps aren't (sad to say) dumbed down for me. Here's an example of what I read:
1: dl CWM (actually had to go look this up and figure out what it was)
2: flash CWM (my phone model wasn't on the list, but after an extensive search found out that I could use the Galaxy S i9000 [supposedly])
3: boot into CWM Recovery (can't do it, for some reason it won't load on my phone.)
4: perform backup with CWM (as before, can't do it, read I could use Titanium backup but no depth was given)
5: dl a rom and place it on your sd card (this one is understood, short and to the point)
6: boot into CWM and flash rom
Unfortunately, when I start out on a new OS (already owning Windows and getting good at Linux) I tend to not even understand these so-called "Dummies Guides." I need something filled with minimal jargon that is short and sweet. Any information would be helpful
Also, I would like to know the likelihood of bricking my phone (based off of its specs) if it is possible to find out...

I'm a little bit confused here. How come you've flashed an i9000 (Galaxy S) firmware onto an Infuse? I think we can work out your backup problems though

I mean that I flashed the Galaxy S i9000 version of CWM Recovery to my phone because there wasn't an InFuse option. (according to one thread, it said that the i9000 version was compatible with the InFuse)
However, I flashed the Recovery, but when I booted into recovery mode, I was still in the stock recovery. Any explanation for this and everything else?
I don't really know anything about the Android system yet, but I hope to be good enough to become a developer one day.

DeltaOps said:
I mean that I flashed the Galaxy S i9000 version of CWM Recovery to my phone because there wasn't an InFuse option. (according to one thread, it said that the i9000 version was compatible with the InFuse)
However, I flashed the Recovery, but when I booted into recovery mode, I was still in the stock recovery. Any explanation for this and everything else?
I don't really know anything about the Android system yet, but I hope to be good enough to become a developer one day.
Click to expand...
Click to collapse
Gotcha. Sounds like the recovery hasn't flashed properly. Did you have the phone rooted before flashing the recovery?
Here is an awesome thread with video guides on just about everything you could need. Here is another. I take it you've already followed at least one of these to get the recovery flashed, so it might pay to try the 3E recovery instead and see if that works.
You may need to go right back to stock and start over. If you do, AdamOutler has got you covered right here.
I'll stay subscribed in case you need anything else, best of luck mate

My phone was rooted with SuperOneClick. Superuser was still intact. I read on a thread that the CWM Recovery could "fake flash" and that it would still be accessible by selecting "boot into recovery" but it doesn't show.
It says 3E in my recovery mode, is that the modified or is it actually stock?
I downloaded CWM from the market (method 2) but for some reason have update.zip on my phone (method 1). Any explanation? I don't exactly remember downloading a .zip file...

DeltaOps said:
My phone was rooted with SuperOneClick. Superuser was still intact. I read on a thread that the CWM Recovery could "fake flash" and that it would still be accessible by selecting "boot into recovery" but it doesn't show.
It says 3E in my recovery mode, is that the modified or is it actually stock?
I downloaded CWM from the market (method 2) but for some reason have update.zip on my phone (method 1). Any explanation? I don't exactly remember downloading a .zip file...
Click to expand...
Click to collapse
It may have 'fake flashed' and not worked at all. Both stock and modified recovery will say 3E, the difference is in the version numbers although I can't picture them off the top of my head. If CWM had worked, you would not be seeing 3E, you would see the typical array of CWM options. The modified 3E does not give you the same options CWM does, it just gives you the option to flash an 'unsigned' image from Recovery.
I have never had any luck with ROM Manager personally, although a lot of people swear by it. I found it especially flaky flashing recoveries to any device, very hit-and-miss. I personally prefer, and recommend, flashing recoveries manually via ADB. A little trickier, but a lot more trustworthy.
That said, try flashing recovery through RM again before taking any further steps. Flashing a recovery over a recovery won't hurt

I've tried three separate times to install the CWM recovery, but all were unsuccessful. What's this about ADB? I remember seeing the ADB Daemon in the SuperOneClick rooting process. And how tricky is it exactly, does it require code?
I have the Titanium Backup app on my phone, and I have backed up all the system and app data, but they are all separate files instead of a single (what, .md5?) file. I remember reading another thread that said you could back up a ROM via TB but I can't find a back up ROM option. Is there a particular way to do this or do I have to have the Premium/Pro version of TB? Or have I pretty much done all I can do with TB?

DeltaOps said:
I've tried three separate times to install the CWM recovery, but all were unsuccessful. What's this about ADB? I remember seeing the ADB Daemon in the SuperOneClick rooting process. And how tricky is it exactly, does it require code?
I have the Titanium Backup app on my phone, and I have backed up all the system and app data, but they are all separate files instead of a single (what, .md5?) file. I remember reading another thread that said you could back up a ROM via TB but I can't find a back up ROM option. Is there a particular way to do this or do I have to have the Premium/Pro version of TB? Or have I pretty much done all I can do with TB?
Click to expand...
Click to collapse
ADB is a command-line interface between your PC and your phone. You enable USB debugging and connect the phone via USB to the computer. Once you have the correct drivers installed, you can then use ADB (part of the Android SDK available for download) to send commands to your phone, as well as push and pull files. This requires full root, which you already have.
For example you can grab the recovery.img for CWN on the Infuse and tell ADB to 'flash recovery recovery.img' and actually ensure it flashes.
There are some excellent ADB tutorials floating around, this one in particular got me started. Make sure you do a bit of reading first though: the wrong command can royally screw you.
After you're familiar, you should be able to use ADB to push a recovery to your phone, whether it be unsecured 3E, or CWM.
I'll stay subscribed for any queries you may have

How close is the ADB interface to other command-line interfaces like Linux or Windows? I use both operating systems on my laptop and I have familiarized myself with both of them (mostly). What am I supposed to be expecting when I use it? Also, I can't seem to find the recovery.img file, what folder would that be under?

DeltaOps said:
How close is the ADB interface to other command-line interfaces like Linux or Windows? I use both operating systems on my laptop and I have familiarized myself with both of them (mostly). What am I supposed to be expecting when I use it? Also, I can't seem to find the recovery.img file, what folder would that be under?
Click to expand...
Click to collapse
Don't know about Linux, but ADB works through a Windows command prompt so its pretty much the same. You will need to have ADB, Fastboot plus whatever you wish to flash (recovery.img) in a 'working' directory, then run a command prompt from that directory.
You will probably need to download the recovery.img file.from XDA. It may be zipped up (they usually are).
Sent from my Galaxy Note using XDA Premium

I've successfully got ADB started in the command prompt (not that bad :]) but when I try to pull the directory map from my phone, it says: remote object "xxxxxxxxx" does not exist. And what's this about Fastboot? Edit: Did a bootloader command test, worked just fine. No success on pulling directory
Command I used: "adb pull -s xxxxxxxxxxx C:\"

DeltaOps said:
I've successfully got ADB started in the command prompt (not that bad :]) but when I try to pull the directory map from my phone, it says: remote object "xxxxxxxxx" does not exist. And what's this about Fastboot? Edit: Did a bootloader command test, worked just fine. No success on pulling directory
Command I used: "adb pull -s xxxxxxxxxxx C:\"
Click to expand...
Click to collapse
I don't think that's the correct format to pull directory structure. I'll have to read up on that one
Fastboot is another tool you can use to flash bootloaders, radios, recoveries etc through the command prompt.
Sent from my Galaxy Note using XDA Premium

You're right, tried using the <remote> variable as a file instead of the device serial. Typed:
adb pull .. files
prompt skitzed out after that. I know it won't damage anything since it's a copy procedure but I'm looking for the file and it's not there. it said it's pulling everything after skipping "special files"
Edit: It just finished, said it couldn't create the file because for some reason it was trying to copy the files from the phone to the phone

DeltaOps said:
You're right, tried using the <remote> variable as a file instead of the device serial. Typed:
adb pull .. files
prompt skitzed out after that. I know it won't damage anything since it's a copy procedure but I'm looking for the file and it's not there. it said it's pulling everything after skipping "special files"
Edit: It just finished, said it couldn't create the file because for some reason it was trying to copy the files from the phone to the phone
Click to expand...
Click to collapse
Yeah, you'll have to give it a target directory, I think it's like this '.\sdcard' to write them to the SD card?
Sent from my Galaxy Note using XDA Premium

If that's the case, then how do I make the file copy to my HDD? The drive doesn't show up on my computer (does it)?

DeltaOps said:
If that's the case, then how do I make the file copy to my HDD? The drive doesn't show up on my computer (does it)?
Click to expand...
Click to collapse
I'm sure that with the correct command, you will be able to pull the structure to your hard drive. I'm not sure if it's .\C:/ or not, I'll have a look when I'm on a proper rig and can do a proper search
Sent from my Galaxy Note using XDA Premium

Thanks! You've been great so far
That noob video was right, XDA is full of awesome people!
Edit: Got it Thanks for the pointers. Now I need to find out how to back up the entire ROM... :/

DeltaOps said:
Thanks! You've been great so far
That noob video was right, XDA is full of awesome people!
Edit: Got it Thanks for the pointers. Now I need to find out how to back up the entire ROM... :/
Click to expand...
Click to collapse
Glad you got it and glad to help. There are a hell of a lot of good people here If there's anything else you need, feel free to PM me.
Good luck buddy!
Sent from my Galaxy Note using XDA Premium

Is there perhaps any way to perform a ROM backup with ADB?

DeltaOps said:
Is there perhaps any way to perform a ROM backup with ADB?
Click to expand...
Click to collapse
Ooh good question. I don't think so, but I'm not sure. I know you can pull directories like /system/ and whatnot, but as for repackaging them into a working backup, that may be a bit more involved. I would use ADB to.push a working CWM and do it that way, but it sounds.like you're a bit better at the command-line stuff than I so you may be able to work it!
Sent from my Galaxy Note using XDA Premium

How to replace one file when failing to boot

Hey guys
I screwed up my vold.fstab trying to get "_ExternalSD" back.
Unfortunately! I did not run a nandroid before I made the change.
Now, I can dirty flash my rom on top, or go back to a nandroid from a few days ago, but I'd really just like to recover and go on my merry way. And maybe learn something in the process.
Only thing is, I can't figure out how to access the phone other than the External SD card through CWM.
Can I mount the internal /system and access through USB? Is there some facility to copy a file from one point to another? Any other methods? I guess the phone has to be up to run ADB, right?
I don't know how to generate a flashable zip but I could extract the original version of the file from the original rom. I assume that its non trivial to create a flashable zip, but maybe someone can comment? It looks like there is signing and certificates involved..
thanks for any ideas

bluenote73 said:
Hey guys
I screwed up my vold.fstab trying to get "_ExternalSD" back.
Unfortunately! I did not run a nandroid before I made the change.
Now, I can dirty flash my rom on top, or go back to a nandroid from a few days ago, but I'd really just like to recover and go on my merry way. And maybe learn something in the process.
Only thing is, I can't figure out how to access the phone other than the External SD card through CWM.
Can I mount the internal /system and access through USB? Is there some facility to copy a file from one point to another? Any other methods? I guess the phone has to be up to run ADB, right?
I don't know how to generate a flashable zip but I could extract the original version of the file from the original rom. I assume that its non trivial to create a flashable zip, but maybe someone can comment? It looks like there is signing and certificates involved..
thanks for any ideas
Click to expand...
Click to collapse
this is why i hate it when people make those guides.
messing with the vold.fstab is dangerous (even though its only a few lines) if your trying to recover your data, give up. its not going to happen. (sorry)
when you edit the vold.fstab it messed up the partitions on your internal SD card and most likely did the equivalent of wiped your /system partition. (or another important one.) your actually lucky it did not completely brick your phone.
your post was a little vague, but if you can, just restore an older nandroid, or wipe everything and install another ROM. (you can try dirty flashing but i dont think itll work)
if you cannot access CWM, then follow the steps in This guide. it should get you back up on your feet. after you follow that guide flash a gingerbread ROM (any gingerbread rom will do fine) then you can reboot and flash any ROM you want. (it needs this to fix a quirk in that script)
Hope you get it fixed
EDIT: re read your post, if your feeling adventurous and want to give it a shot, boot into CWM and connect it via usb. you can now get into an ADB shell on your phone by typing 'adb shell' if you have adb all setup and working. (im working from memory here so dont quote me on any of this)
now, you should be able to access your /system folder from that shell. be very careful though, i dont have much experience right here, and if i remember correctly you might not be in the full root directory yet)
if you can get into it try replacing your vold.fstab with a stock one,
if you dont have a stock one lying around, make a nandroid of the current state of the rom, then flash another rom, pull the vold.fstab, then re-restore back to the broken one and restore it (id upload mine but my phone is OOC right now )
after that just reboot and hope it resolves itself, if not then just follow my advice above
and keep that guide i linked to handy, messing around in CWM has the ability to brick your phone, if it does, then just follow that guide.

Klathmon said:
this is why i hate it when people make those guides.
messing with the vold.fstab is dangerous (even though its only a few lines) if your trying to recover your data, give up. its not going to happen. (sorry)
when you edit the vold.fstab it messed up the partitions on your internal SD card and most likely did the equivalent of wiped your /system partition. (or another important one.) your actually lucky it did not completely brick your phone.
your post was a little vague, but if you can, just restore an older nandroid, or wipe everything and install another ROM.
if you cannot access CWM, then follow the steps in This guide. it should get you back up on your feet. after you follow that guide flash a gingerbread ROM (any gingerbread rom will do fine) then you can reboot and flash any ROM you want. (it needs this to fix a quirk in that script)
Hope you get it fixed
Click to expand...
Click to collapse
How bout adb and pushing the file back in? Or cant you access the phone via adb?
Sent from my LG-P970 using XDA

N00BY0815 said:
How bout adb and pushing the file back in? Or cant you access the phone via adb?
Sent from my LG-P970 using XDA
Click to expand...
Click to collapse
re read your post and updated my last post right after you posted
after dealing with noobies all day, i forget sometimes people want to try big things

Thanks guys. The info I was missing was there's no special trick to attaching adb while in CWM! Just plug in!
My phone is back up and running and partitions are fine as far as I can see after just booting up.

Hi there! I messed up with the vold.fstab filfe on my tablet – I replaced it with a downloaded file with the intention to transfer apps to my external SD card.
Now my tablet is only showing the startup logo and won’t continue loading. I can access recovery mode. Now I want to restore the original vold.fstab file.
My questions:
1. Using the Android SDK, the file explorer does not show any files, though my tablet is recognized.
2. Using adb push, it yields an error: permission denied, how to successfully push the original vold.fstab and replace the existing vold.fstab?
3. If I dump an image of my tablet and edit the dumped image, would this be easier compared to the steps above?
Thanks!

http://forum.xda-developers.com/showthread.php?t=1646108
Try this.
If this doesn't help you should ask in the section for your tablet to get more specific advice.

TwitchyEye said:
http://forum.xda-developers.com/showthread.php?t=1646108
Try this.
If this doesn't help you should ask in the section for your tablet to get more specific advice.
Click to expand...
Click to collapse
Thanks, I will try it later when I got home. My tablet is not found here. I have a Skyworth S71(3G) with RK3066 chipset.

BryanF said:
Thanks, I will try it later when I got home. My tablet is not found here. I have a Skyworth S71(3G) with RK3066 chipset.
Click to expand...
Click to collapse
You need to do an adb remount before you can push. Was it rooted before?
-- The noob says:
This just in... my IQ has increased 50 points thanks to the g2x!

Mansa_noob, yes, my tablet is rooted. I followed some instructions about adb but had an error saying access denied, and also no files are displayed at file explorer. See my posts above. I also mounted it successfully. I will post some sreenshots later.
Please if you have some instructions, I am willing to try.
---------- Post added at 07:06 AM ---------- Previous post was at 07:02 AM ----------
TwitchyEye said:
http://forum.xda-developers.com/showthread.php?t=1646108
Try this.
If this doesn't help you should ask in the section for your tablet to get more specific advice.
Click to expand...
Click to collapse
Hi twitchyEye, it did not work. It attemps to install (using the install update from ext sd card) but then says installation aborted.
Any more suggestions? Thanks

What recovery are you using? I suck with adb so I got nothing on that front.

It was the stock recovery from my Tablet. I don't have it on hand right now, I will post later. The chipset is RK3066. My problem is my tablet has no official support on the internet (maybe becaue it's still new). Model is Skyworth S71(3G).

I see. Yeah this is over my head man. I thought for sure you were running a custom recovery and it was an easy answer. I'm actually struggling right now with adb myself with a similar issue something about permissions whenever I try to do anything to my phone. So I guess right now would be a perfect time for somebody to chime in with a smarter answer!

TwitchyEye said:
I see. Yeah this is over my head man. I thought for sure you were running a custom recovery and it was an easy answer. I'm actually struggling right now with adb myself with a similar issue something about permissions whenever I try to do anything to my phone. So I guess right now would be a perfect time for somebody to chime in with a smarter answer!
Click to expand...
Click to collapse
Are you doing adb remount and still getting permission denied?
-- The noob says:
This just in... my IQ has increased 50 points thanks to the g2x!

mansa_noob said:
Are you doing adb remount and still getting permission denied?
-- The noob says:
This just in... my IQ has increased 50 points thanks to the g2x!
Click to expand...
Click to collapse
Yes, I did adb remount and still access denied

BryanF said:
Yes, I did adb remount and still access denied
Click to expand...
Click to collapse
This is strange. A properly rooted phone would adb remount to r/w system. Something is fishy. Is it rooted+
-- The noob says:
This just in... my IQ has increased 50 points thanks to the g2x!

mansa_noob said:
This is strange. A properly rooted phone would adb remount to r/w system. Something is fishy. Is it rooted+
-- The noob says:
This just in... my IQ has increased 50 points thanks to the g2x!
Click to expand...
Click to collapse
I am sure it is rooted, because I downloaded an application from Google play to check it it is rooted or not. It is really rooted. I alvo confirmed this as I can now fully backup and restore my apps using Titanium backup before the tablet is messed up.

BryanF said:
I am sure it is rooted, because I downloaded an application from Google play to check it it is rooted or not. It is really rooted. I alvo confirmed this as I can now fully backup and restore my apps using Titanium backup before the tablet is messed up.
Click to expand...
Click to collapse
OK. Odd or not, it is what it is. Is it possible for you to load a custom recovery?
-- The noob says:
This just in... my IQ has increased 50 points thanks to the g2x!

mansa_noob said:
OK. Odd or not, it is what it is. Is it possible for you to load a custom recovery?
-- The noob says:
This just in... my IQ has increased 50 points thanks to the g2x!
Click to expand...
Click to collapse
I want to try, but the stock recovery is my last hold as I have no stock ROM. If I overwrite the stock ROM, I cannot reinstall it as I don't have a copy of it.

So why not flash cwm with nvflash and then make a backup of your current stock rom? I did exactly that.
Sent from my LG-P999 using xda premium

Phone won't finish boot process, need urgent help

Alright so looks like I did something completely stupid and now my phone won't finish the boot process. I was looking at some remappings for the recent key to the menu option and from a post in the development section I found a thread in the International One X development forum that had re-odexed files so that the recent key stayed as the recent key and holding the home button became the menu key. Since they were re-odexed and I had root access I figured I would just manually replace them on my phone with Root Explorer...bad idea. The files were:
System/Framework/android.policy.odex
System/Usr/keylayout/qwerty.kl
After I moved them and reset permissions I rebooted my phone and now it goes through the first couple of boot animations but gets stuck on screen that displays beats audio at the bottom.
I really need to know what to do to fix this. When I plug my phone into my computer it recognizes it as a new \drive, but I don't have access to any of it (still says I need to mount). I also have the android SDk and adb installed if thats of any help. I would really like to not lose any data so hopefully thats possible.
Please help me with this if you have any knowledge of what to do.

Just one little quick update. Even though my computer won't let me access my One X as a drive, when I use command prompt and adb to check for adb devices my One X is listed.

Run the at&t ruu exe file, located in the Dev section.

tanman21 said:
Run the at&t ruu exe file, located in the Dev section.
Click to expand...
Click to collapse
Alright I'm downloading that now.
In the meantime, how do I get root access with adb/give it permission to overwrite read only files? I pulled the two files that caused this messed and pulled my backups, but when I push them back to the phone it tells me I can't because their read only. I'd rather do it this way since I will be changing only the files that caused the problem.
EDIT: Is the RUU really going to delete all the information on my device? If thats the case I would really appreciate figuring out how to get adb to push my backuped files to the /system directory instead

ErikWithNoC said:
Alright I'm downloading that now.
In the meantime, how do I get root access with adb/give it permission to overwrite read only files? I pulled the two files that caused this messed and pulled my backups, but when I push them back to the phone it tells me I can't because their read only. I'd rather do it this way since I will be changing only the files that caused the problem.
EDIT: Is the RUU really going to delete all the information on my device? If thats the case I would really appreciate figuring out how to get adb to push my backuped files to the /system directory instead
Click to expand...
Click to collapse
Yeah, the RUU returns your phone to factory (but doesn't touch your personal files)
EDIT: Also, just pulling this off the top of my head so take it with a grain of salt...
adb devices
adb shell
su
*grant the su request on your device*
adb push <from> <to>

stnguyen09 said:
Yeah, the RUU returns your phone to factory (but doesn't touch your personal files)
EDIT: Also, just pulling this off the top of my head so take it with a grain of salt...
adb devices
adb shell
su
*grant the su request on your device*
adb push <from> <to>
Click to expand...
Click to collapse
Thanks for your comment. I used the RUU and it kept my personal data so its not a big lose. Had to reinstall a few apps, but for most of them (games at least) my saved data was still there.
I tried a lot using adb and just couldn't get it to work. I don't the phone got far enough through the boot process for root access to be allowed. I was able to run the one click root tool while it was in its stuck boot phase, but it still wouldn't give me permission to modify the /system portion of the phone to be read/write.
All in all though this was a great learning experience. Prior to this happening I knew nothing about adb and now I know commands for pulling, pushing, remounting, shell commands, and other things. I also learned how to fix a softbrick (first one) and what RUU is.

[Q] Unfortunately Launcher has stopped and other issues

Hi guys,
I've been reading you for a while, but this is actually my first post.
Currently stuck with a "Unfortunately, Launcher has stopped" on my tablet, with no access to any menus except my Settings. The menu bar (back, home and multitasking) is now gone. I've got my keyboard to navigate, but something in the display is also quite wrong, image seems to be zoomed, or set at the wrong resolution. Tried to search on the forum, but all posts found were not about the same rom or the same issue. Sorry if I missed one.
Here's a little background story:
I've rooted my TF300T about a month ago and installed Hydro 4.1. It has been working very well since then, but in the last days, I thought that my tablet felt a little slower than usual, so I started searching if an update to 4.2 was available.
I'm not sure if this is what caused the issue or not, but I went into my "Power button" menu and went into "Recovery" mode (instead of Shutdown, reboot, etc.), which then restarted my unit into TWRP menu.
I then selected the "System" submenu and simply touched "Reboot". (terms might not be exact). At the first reboot, I got the problems that I described.
Can't do much, popup keeps appearing on my screen. I haven't tried yet to clear the cache of my Launcher, which I'm trying to avoid as I would prefer to avoid rearranging 5 pages of icons, but between that and reinstalling everything, obviously I prefer to simply lose my display preferences.
Can anyone help me about what caused my issue, and what can I do now?
Here are 2 screenshots that I took, showing that my bottom menu is missing and that the fonts aren't set right (clock and left icon). Also, my notifications menu now appears near the middle of my screen.
EDIT: I unfortunately cannot post links yet
I remember installing an app (with root access) that gave me a menu about my resolution. One thing that I'm wondering, could it be that the resolution got changed and I simply never rebooted since the change, which now caused my Launcher to crash? How can I launch an app without having access to the app menu?
Thanks in advance for your help.

irepressed said:
Hi guys,
I've been reading you for a while, but this is actually my first post.
Currently stuck with a "Unfortunately, Launcher has stopped" on my tablet, with no access to any menus except my Settings. The menu bar (back, home and multitasking) is now gone. I've got my keyboard to navigate, but something in the display is also quite wrong, image seems to be zoomed, or set at the wrong resolution. Tried to search on the forum, but all posts found were not about the same rom or the same issue. Sorry if I missed one.
Here's a little background story:
I've rooted my TF300T about a month ago and installed Hydro 4.1. It has been working very well since then, but in the last days, I thought that my tablet felt a little slower than usual, so I started searching if an update to 4.2 was available.
I'm not sure if this is what caused the issue or not, but I went into my "Power button" menu and went into "Recovery" mode (instead of Shutdown, reboot, etc.), which then restarted my unit into TWRP menu.
I then selected the "System" submenu and simply touched "Reboot". (terms might not be exact). At the first reboot, I got the problems that I described.
Can't do much, popup keeps appearing on my screen. I haven't tried yet to clear the cache of my Launcher, which I'm trying to avoid as I would prefer to avoid rearranging 5 pages of icons, but between that and reinstalling everything, obviously I prefer to simply lose my display preferences.
Can anyone help me about what caused my issue, and what can I do now?
Here are 2 screenshots that I took, showing that my bottom menu is missing and that the fonts aren't set right (clock and left icon). Also, my notifications menu now appears near the middle of my screen.
EDIT: I unfortunately cannot post links yet
I remember installing an app (with root access) that gave me a menu about my resolution. One thing that I'm wondering, could it be that the resolution got changed and I simply never rebooted since the change, which now caused my Launcher to crash? How can I launch an app without having access to the app menu?
Thanks in advance for your help.
Click to expand...
Click to collapse
What you describe is likely caused by changing the resolution. Are you still running hydro 4.1?
You can likely recover by replacing your build.prop or editing the one you now have. build.props are usualy rom specific so you need one from the rom you are using.

tobdaryl said:
What you describe is likely caused by changing the resolution. Are you still running hydro 4.1?
You can likely recover by replacing your build.prop or editing the one you now have. build.props are usualy rom specific so you need one from the rom you are using.
Click to expand...
Click to collapse
Yes, still using Hydro 4.1. I do have a build.prop editor installed on my tablet, but since I can't launch app, I don't know how to do it.
I'll try to connect the tablet to my PC and see if I can get access to my file from there.
Thanks!

irepressed said:
Yes, still using Hydro 4.1. I do have a build.prop editor installed on my tablet, but since I can't launch app, I don't know how to do it.
I'll try to connect the tablet to my PC and see if I can get access to my file from there.
Thanks!
Click to expand...
Click to collapse
I'm presently downloading 4.1 hydro to retrieve the build.prop. If you unzip it the build.prop is /system/build.prop also located there on your tab. I have another fifteen minutes to download if you wish for me to supply the file!

tobdaryl said:
I'm presently downloading 4.1 hydro to retrieve the build.prop. If you unzip it the build.prop is /system/build.prop also located there on your tab. I have another fifteen minutes to download if you wish for me to supply the file!
Click to expand...
Click to collapse
If you could, I would appreciate it!
Only thing left, how can I send the file to my TF300T without access to my apps? I'm currently trying to cheat by opening my apps using the Share feature with screenshots taken, but so far, no success.

irepressed said:
If you could, I would appreciate it!
Only thing left, how can I send the file to my TF300T without access to my apps? I'm currently trying to cheat by opening my apps using the Share feature with screenshots taken, but so far, no success.
Click to expand...
Click to collapse
We should be able to push with adb, set permissions, and reboot.
---------- Post added at 04:58 PM ---------- Previous post was at 04:36 PM ----------
http://www.mediafire.com/?tk3cifzci0vw24e
place the build.prop from the zip file into the directory with fastboot.
Open terminal or cmd in the directory with fastboot.
Boot into twrp – twrp provides adb access by default.
Use twrp mount menu and check mount system.
Then type
adb push build.prop /system/build.prop
adb shell chmod 644 /system/build.prop
in twrp reboot system
type
adb kill-server

tobdaryl said:
We should be able to push with adb, set permissions, and reboot.
---------- Post added at 04:58 PM ---------- Previous post was at 04:36 PM ----------
place the build.prop from the zip file into the directory with fastboot.
Open terminal or cmd in the directory with fastboot.
Boot into twrp – twrp provides adb access by default.
Use twrp mount menu and check mount system.
Then type
adb push build.prop /system/build.prop
adb shell chmod 644 /system/build.prop
in twrp reboot system
type
adb kill-server
Click to expand...
Click to collapse
Ok, my Fastboot folder is currently at the root of my C drive on my PC
I entered your command and got after the first one "adb server is out of date. killing...
* daemon started successfully *
error: device not found
FYI, before I got your last post, I used Android commander to push the build.prop that I still had on my PC when I installed the custom hydro 4.1 rom.
After my reboot, I got the Asus logo, than a black screen that does nothing.
I then rebooted in Fastboot and followed your instructions.
So now, it seems that my pc doesnt see my tablet anymore when in TWRP. is this normal? Do I need to restart it after checking "Mount system"?

irepressed said:
Ok, my Fastboot folder is currently at the root of my C drive on my PC
I entered your command and got after the first one "adb server is out of date. killing...
* daemon started successfully *
error: device not found
FYI, before I got your last post, I used Android commander to push the build.prop that I still had on my PC when I installed the custom hydro 4.1 rom.
After my reboot, I got the Asus logo, than a black screen that does nothing.
I then rebooted in Fastboot and followed your instructions.
So now, it seems that my pc doesnt see my tablet anymore when in TWRP. is this normal? Do I need to restart it after checking "Mount system"?
Click to expand...
Click to collapse
Ok, I just killed my adb.exe, tried the command again and that got rid of the out of date error.
But, still stuck with the "device not found".

irepressed said:
Ok, my Fastboot folder is currently at the root of my C drive on my PC
I entered your command and got after the first one "adb server is out of date. killing...
* daemon started successfully *
error: device not found
FYI, before I got your last post, I used Android commander to push the build.prop that I still had on my PC when I installed the custom hydro 4.1 rom.
After my reboot, I got the Asus logo, than a black screen that does nothing.
I then rebooted in Fastboot and followed your instructions.
So now, it seems that my pc doesnt see my tablet anymore when in TWRP. is this normal? Do I need to restart it after checking "Mount system"?
Click to expand...
Click to collapse
Slowdown, I'm getting behind. I'm willing to help but you are now worse off than before.
Sit tight for five minutes and I'll try to give you a twrp flashable zip for your build.prop and hope that is the extent of the damage.
If not we'll try to go from there.
http://www.mediafire.com/?ybplc1ws8uvskhf
This is a twrp flashable zip that only replaces your build.prop with the one from hydro 4.1.

tobdaryl said:
Slowdown, I'm getting behind. I'm willing to help but you are now worse off than before.
Sit tight for five minutes and I'll try to give you a twrp flashable zip for your build.prop and hope that is the extent of the damage.
If not we'll try to go from there.
This is a twrp flashable zip that only replaces your build.prop with the one from hydro 4.1.
Click to expand...
Click to collapse
Alright, I'll wait for your answer before trying anything else.
So now, I've got your latest .zip file.
Still can't see my TF300T from my PC, so, ADB is a no go for now.
In fact, I do see it in the Device Manager, but since my last reboot, it now shows an exclamation mark on it as if my drivers weren't good.
Since you mentioned the file is a flashable zip, I'm guessing that I can flash it using TWRP without going through my PC?
Can you give me precise info on that, since I do not want to mess with my system more than I already did.
Thanks

irepressed said:
Alright, I'll wait for your answer before trying anything else.
So now, I've got your latest .zip file.
Still can't see my TF300T from my PC, so, ADB is a no go for now.
In fact, I do see it in the Device Manager, but since my last reboot, it now shows an exclamation mark on it as if my drivers weren't good.
Since you mentioned the file is a flashable zip, I'm guessing that I can flash it using TWRP without going through my PC?
Can you give me precise info on that, since I do not want to mess with my system more than I already did.
Thanks
Click to expand...
Click to collapse
Look at the bottom of my previous post. You will find a new link there. Just flash with twrp and reboot. Don't worry about wiping or any of that, just flash and reboot.

tobdaryl said:
Look at the bottom of my previous post. You will find a new link there. Just flash with twrp and reboot. Don't worry about wiping or any of that, just flash and reboot.
Click to expand...
Click to collapse
Yep, that's the file I was talking about.
I now need to flash and reboot, your file is at the root of an SDcard in my TF300T, I go through the Install menu and then, can't seem to view the content of my sdcard. Tried to mount it first but can't select it either, it will simply stay on "Internal Storage".
EDIT: The RCK icon is the only one right now that boots me into something. If I try the USB icon, it just stays on that screen forever.

Trash the two zips you have downloaded. I'm providing a new one for when we get back to that point. And there will be no doubt about which zip you are using.
http://www.mediafire.com/?hagehu5qu5ky6sf
OK. First I'll explain your earlier comment about adb being old. Twrp expects a recent adb or refuses to allow adb access ( we'll not worry at the moment about that but it is something you need to address later (I hope).
If you have a cord between your tablet and pc remove it. The sdcard may be mounted as data on the pc and not allow twrp to mount it.
You have been using this sdcard prior to this exercise?
Do you have any backups or flashable zips or anything of that nature on your internal sdcard?
If so what?

tobdaryl said:
Trash the two zips you have downloaded. I'm providing a new one for when we get back to that point. And there will be no doubt about which zip you are using.
OK. First I'll explain your earlier comment about adb being old. Twrp expects a recent adb or refuses to allow adb access ( we'll not worry at the moment about that but it is something you need to address later (I hope).
If you have a cord between your tablet and pc remove it. The sdcard may be mounted as data on the pc and not allow twrp to mount it.
You have been using this sdcard prior to this exercise?
Do you have any backups or flashable zips or anything of that nature on your internal sdcard?
If so what?
Click to expand...
Click to collapse
Zips trashed, kept only the one provided in your latest answer.
No cord between PC and tablet. Still unable to click on "Using external SD" or "Mount SDCard". It simply won't let me check the box or switch the bullet.
As for using this SDcard before, yes in a PC, but no, first time in my Asus. Also tried with another one just in case and same result.
As for backups and flashable zips, I kept everything from when I did my root and rom install.
I do know that I have a backup in the Restore menu of TWRP, which seems about the time I installed it. I suppose I could simply do a restore and avoid additional headaches, but my question is, what exactly will it restore? At this point, I'm mentally prepared to go back to what I had after installing Hydro 4.1, as long as I can use the tablet ASAP.

Asap = restore your backup.
If I'm restoring a different rom I'll wipe Cache, Dalvik Cache, and Factory Reset. If the backup is from the same rom I'm flashing and I want to keep the apps I have Installed since the backup I won't Factory Reset.
Good Luck!

tobdaryl said:
Asap = restore your backup.
If I'm restoring a different rom I'll wipe Cache, Dalvik Cache, and Factory Reset. If the backup is from the same rom I'm flashing and I want to keep the apps I have Installed since the backup I won't Factory Reset.
Good Luck!
Click to expand...
Click to collapse
So, I did the restore, and I'm up and running, but, no more Hydro 4.1. I guess my backup was probably what got done right before the installed it.
The good thing is, my tablet is working again and my root is still active. The bad part is that I'm gonna have to dig my head again in all the tutorials and try to find the best one.
Hey, I wanted to say a huge thank you for all your help, if it wasn't for guys like you, newbies like me would be stuck with useless thin computers.

irepressed said:
So, I did the restore, and I'm up and running, but, no more Hydro 4.1. I guess my backup was probably what got done right before the installed it.
The good thing is, my tablet is working again and my root is still active. The bad part is that I'm gonna have to dig my head again in all the tutorials and try to find the best one.
Hey, I wanted to say a huge thank you for all your help, if it wasn't for guys like you, newbies like me would be stuck with useless thin computers.
Click to expand...
Click to collapse
Great I'm glad you are happy. I had hoped for the outcome you expressed but this works also.
You're welcome!

Phone stuck in bootloop after hard reset, need to salvage a video off it...possible?

Pressed the home button while using Snapchat, phone froze, had to hard reset it, phone got stuck in constant Google logo bootloop. Getting a replacement shipped out...but I have a video I recorded yesterday morning that never backed up on Photos, any possible way to save it? Someone mentioned an ADB method..? But with my little research I think you need to factory reset the phone for that, which would make this method a waste as I need to get this video off it.
I never rooted this phone, I didn't unlock the bootloader. I did turn on developer settings. That's all I know regarding that.
Other information regarding the fastboot screen: Boot-slot: a, Console: DISABLED, Secure Boot: PRODUCTION, Device is LOCKED.
I've turned it off and on multiple times, same thing. Rebooted it during loops, or at least tried to, same thing. Went into fastboot mode from loops, pressed start, same thing. Went into fastboot mode from phone off, same thing. I don't know what else to do. There is no way to clear a memory cache apparently. And I am sort of n00bish in this world.
Anyways, what could I possibly do to save this video, or to fix my phone out of this bootloop to take the video off the right way before my replacement comes in? Anyway to do either of that via 'ADB', some lowkey program I don't know about that can rip the entire phone's data onto some type of file I can decrypt, a program like Recuva that will find the file(s) for me and yank them out, etc? I know there has to be somebody out there with the skills or capabilities to do something like this... I hope. Please help out and let me know, thanks.

If you could do something like that with a locked bootloader / unrooted device then all security for Android would be a sham. I'd be very discouraged if someone could hack into a secure device and pull out information such as pictures, phone numbers, messages etc.

If it is locked, you are done. It's encrypted. If it were unlocked you could easily get it off the phone.

Well, I'm not feeling optimistic at all now. So there is 0, nada, nothing I can do to save this video/file or fix my phone? All because the device decided to randomly get stuck in this bootloop, I am absolutely screwed?

Unless you can get it to boot up then I do believe you are out of luck. You can't get into recovery menu?
Sent from my Pixel using XDA-Developers Legacy app

bobby janow said:
Unless you can get it to boot up then I do believe you are out of luck. You can't get into recovery menu?
Sent from my Pixel using XDA-Developers Legacy app
Click to expand...
Click to collapse
Fastboot > Recovery mode > No command screen > Power button hold + Volume up tap > Android Recovery screen with Reboot system now, Reboot to bootloader, Apply update from ADB, etc?
If that's what you mean, I can get there, I'm there right now.

czbwoi said:
Fastboot > Recovery mode > No command screen > Power button hold + Volume up tap > Android Recovery screen with Reboot system now, Reboot to bootloader, Apply update from ADB, etc?
If that's what you mean, I can get there, I'm there right now.
Click to expand...
Click to collapse
Sorry afk. Yes, that is exactly where you want to be. Try an adb sideload of the latest OTA or even the last full image. I do believe you can sideload that but if not then the OTA. You might be able to recover that way. If something got corrupt then the sideload might fix it. Or is there an option to clear cache? I think there is, you can try that first.

bobby janow said:
Sorry afk. Yes, that is exactly where you want to be. Try an adb sideload of the latest OTA or even the last full image. I do believe you can sideload that but if not then the OTA. You might be able to recover that way. If something got corrupt then the sideload might fix it. Or is there an option to clear cache? I think there is, you can try that first.
Click to expand...
Click to collapse
No option to clear cache, the rest of the options are: Apply update from SD card, Wipe data/factory reset, Mount /system, View recovery logs, Run graphics test, Power off.
I have no idea how to sideload an OTA or image to try to fix this...if you could point it out to me step by step, literally, I'd appreciate it.

czbwoi said:
No option to clear cache, the rest of the options are: Apply update from SD card, Wipe data/factory reset, Mount /system, View recovery logs, Run graphics test, Power off.
I have no idea how to sideload an OTA or image to try to fix this...if you could point it out to me step by step, literally, I'd appreciate it.
Click to expand...
Click to collapse
Don't have directions atm for sideload online but the way it works is you download the OTA from here: https://developers.google.com/android/ota Scroll down to Pixel latest U build 7.1.1. Download it and place it in your fastboot android sdk folder, I put it in the platform-tools so it's easy. Then click apply update from sd card by highlighting it with the vol keys and then power key to select. It will tell you what to do. I forgot exactly but it's something like "adb sideload <ota.zip> whatever the name is and then let it go. It will take about 10 min and after it's all done, highlight the reboot option. Power key and reboot. Hopefully that should fix it. If not, sorry I'm all out of ideas. Well other that adb sideload the full image although someone will have to verify if that would work.

bobby janow said:
Don't have directions atm for sideload online but the way it works is you download the OTA from here: https://developers.google.com/android/ota Scroll down to Pixel latest U build 7.1.1. Download it and place it in your fastboot android sdk folder, I put it in the platform-tools so it's easy. Then click apply update from sd card by highlighting it with the vol keys and then power key to select. It will tell you what to do. I forgot exactly but it's something like "adb sideload <ota.zip> whatever the name is and then let it go. It will take about 10 min and after it's all done, highlight the reboot option. Power key and reboot. Hopefully that should fix it. If not, sorry I'm all out of ideas. Well other that adb sideload the full image although someone will have to verify if that would work.
Click to expand...
Click to collapse
Just sideloaded the latest OTA with the help of a friend, and no luck. Same old stuff. And I think sideloading an image would require the bootloader to be unlocked which would require a factory reset...
Here's another thing that crossed my mind, have any of you ever used EaseUS MobiSaver for Android? It's a tool that allows you to recover deleted files from your phone, similar to Recuva and hard drives. I used it before on my parents' Galaxies, this program is from circa 2014 though so I don't know if it would have much success on a new phone like this...but you never know?
For it to work you need to have your phone on (derp) and have it rooted. Here's the tricky part...if you erase your hard drive and use a tool like Recuva, even though you erased your drive the remnants are still "there" and files are recoverable with a tool like that. Do you think that the same concept would work with phones and EaseUS MobiSaver? Say that I factory reset the phone, set it up as a new device and don't transfer over any backup, I root it, and run said program to scan the deep contents of the phone's hard drive for old data. Do you think this will work in any way possible, like how regular hard drives that got erased work, or is the phone world completely different and incomparable?

EaseUS will not work on a factory reset. You can't recover anything.

bobby janow said:
EaseUS will not work on a factory reset. You can't recover anything.
Click to expand...
Click to collapse
Well then what about programs like these: https://youtu.be/iPCoyRpMrqw?t=58s
http://www.jihosoft.com/recover-data/recover-data-after-factory-reset.html
http://androiddatarecovery.co/recover-data-after-factory-reset-from-android-mobile/
Some people say they have had some success with these...

Let us know. I'll wager you won't get anything back on the Pixel. Good luck.

czbwoi said:
Pressed the home button while using Snapchat, phone froze, had to hard reset it, phone got stuck in constant Google logo bootloop. Getting a replacement shipped out...but I have a video I recorded yesterday morning that never backed up on Photos, any possible way to save it? Someone mentioned an ADB method..? But with my little research I think you need to factory reset the phone for that, which would make this method a waste as I need to get this video off it.
I never rooted this phone, I didn't unlock the bootloader. I did turn on developer settings. That's all I know regarding that.
Other information regarding the fastboot screen: Boot-slot: a, Console: DISABLED, Secure Boot: PRODUCTION, Device is LOCKED.
I've turned it off and on multiple times, same thing. Rebooted it during loops, or at least tried to, same thing. Went into fastboot mode from loops, pressed start, same thing. Went into fastboot mode from phone off, same thing. I don't know what else to do. There is no way to clear a memory cache apparently. And I am sort of n00bish in this world.
Anyways, what could I possibly do to save this video, or to fix my phone out of this bootloop to take the video off the right way before my replacement comes in? Anyway to do either of that via 'ADB', some lowkey program I don't know about that can rip the entire phone's data onto some type of file I can decrypt, a program like Recuva that will find the file(s) for me and yank them out, etc? I know there has to be somebody out there with the skills or capabilities to do something like this... I hope. Please help out and let me know, thanks.
Click to expand...
Click to collapse
You can often get ADB while it's booting. It just depends how far into the boy process is made it. I would power it up and see if you can ADB pull the file.

TCPDump said:
You can often get ADB while it's booting. It just depends how far into the boy process is made it. I would power it up and see if you can ADB pull the file.
Click to expand...
Click to collapse
My friend was able to give it ADB commands on the fastboot/recovery menu, we sideloaded the latest OTA like that to see if it would fix it. What are you describing though, how would I be able to do that? Do you have any instructions or links on what to do? I don't know the file name for instance. The last video before that one was named VID_20170104_011325.mp4, I don't know how to find out the name of the next video file to even try to attempt what you're saying, unless you know of some way...

czbwoi said:
My friend was able to give it ADB commands on the fastboot/recovery menu, we sideloaded the latest OTA like that to see if it would fix it. What are you describing though, how would I be able to do that? Do you have any instructions or links on what to do? I don't know the file name for instance. The last video before that one was named VID_20170104_011325.mp4, I don't know how to find out the name of the next video file to even try to attempt what you're saying, unless you know of some way...
Click to expand...
Click to collapse
Well, IF it had booted enough to mount storage and start the adb daemon then you would use adb shell to locate the file.
Example:
adb shell
cd /sdcard/DCIM/
ls -la
Assuming your filename is in there, it its name is VID_20170104_011325.mp4 then you could exit the shell and do this:
adb pull /sdcard/VID_20170104_011325.mp4

TCPDump said:
Well, IF it had booted enough to mount storage and start the adb daemon then you would use adb shell to locate the file.
Example:
adb shell
cd /sdcard/DCIM/
ls -la
Assuming your filename is in there, it its name is VID_20170104_011325.mp4 then you could exit the shell and do this:
adb pull /sdcard/VID_20170104_011325.mp4
Click to expand...
Click to collapse
Only place I can seem to enter adb commands is when I go to apply update from adb, and when I do so the only thing it responds to is adb devices and sideloading, presumably because that is all it allows me to do in that mode. When I enter adb shell I get error: closed