Hey,
I've got the Nexus S (Herring). Until now it is locked, but I want to flash recovery and CM 10.1.
Only Problem till now is that my PC (Windows 8 x64) just recognizes a "Android 1.0" but the pc shows that there are no drivers...
Now I don't know how to continiue.
Any ideas?
greez Muff(in)
Now I tried pdanet.
It seems to work while the phone is booted, but in fastboot mode it is not able to connect (FASTBOOT STATUS - FAILInval id Command) so I can't use the fastboot comands..
greez
Everything works now.
Used a tool which discribed how to install the drivers without the source verification.
greez
Related
I can't seem to get the fastboot usb drivers to install....i tried:
a) downloaded the asus android usb drivers but can't install manually because they won't do it on x64?!
b) installed asus pc sync (should install drivers also right?)
now i'm in fastboot usb download and when i connect the cable, it says USB device not recognized.
what can be done?
installed the SDK and now i see the device recognized in ADB, but i can't get it to be recognized in fastboot mode ???!!!!!! same error about unrecognized device...
// EDIT: WELL ****ING HELL, it was the USB port!!! I tried 3 of them (front panel) and same result
Switched to a backpanel port and it flashed TWRP straight away....
**** this, pls close thread.
USB Drivers are let your PC communicate with your device.
If you are executing some ADB Commands, you will need USB Drivers installed which will let the ADB server on your PC communicate with the ADB client on your device. If there are no USB Drivers installed on your PC, you will not be able to perform activities on your device via the PC.
First of All I would recommend you to install Universal ADB Driver Installer.The Universal ADB Driver installer detects your phone and installs the ADB drivers for it.This tool developed by drsmart is your solution to the “device not found” error you might get on executing ADB commands.
Universal ADB Driver Installer Download Link - http://adbdriver.com/downloads/
USB DRIVERS
1.SAMSUNG:
--- http://www.samsung.com/us/support/downloads
2.LG
---http://www.lg.com/us/support/mobile-support
3.HTC
---https://support.htc.com/en
4.SONY
---http://developer.sonymobile.com/downloads/drivers/
5.ASUS
---http://support.asus.com/download/options.aspx?SLanguage=en&type=1
6.MOTOROLA
---http://www.motorola.com/sites/motodev/us-en/motodev_lp.html
MORE DEVICES WILL BE UPDATED
Thanks for the info. I tried the univ adb driver installer but it showed I already had the right driver installed. Windows explorer can see my phone but other apps like HTC Sync or myphoneexplorer can't. This only happened after I rooted & installed a new rom. Maybe the rom is faulty...
I want Google nexus driver
any one can help me ?
mt6572 driver
Please add driver for mt6572 device
thx. very usefull!
thanks for the updated links.
Gole Maryam said:
I want Google nexus driver
any one can help me ?
Click to expand...
Click to collapse
an universal driver for all Nexus Devices (Phones and Tablets) can be found here:
http://forum.xda-developers.com/showthread.php?t=2513339
No access to USB debug
I give up and need some professional help...Ya both kinds.
Here we go, I have the Galaxy 3 d2att I747
Rooted
I was running CM 10.2 with latest nightly, I think 20131208 and decided to update to CM11 via my Cyanogenmod updater but before I did I had read somewhere I should change from CWM recovery to TWRP so I downloaded Goomanager and updated to the TWRP version for my phone then went for the KitKat update and thats when the trouble began.
I am now stuck in a boot loop even if I try to boot into TWRP all I get is the TWRP boot logo then straight into boot loop again. I am almost positive I did a factory wipe as well as cache/dalvik.
Not being able to use TWRP to get into recovery I thought I would just use Odin but I can't get any of my laptops to recognize the phones USB, I just get the windows usb driver error and have tried to install the drivers manually via device manager using my samsung 7 chronos with windows 8.1 and my acer with windows 7. I updated drivers using Samsung Kies and from the website, no luck.
I also ventured into an area that I have no expertise in but I guess thats how we learn so I downloaded the Android SDK thinking I could use it to download and install the google USB drivers that way, but I can't get out of boot loop to make sure USB debugging is checked. The only thing I can access is the stock download mode which would be great if I could use the USB connection.
What am I missing? Any suggestions?
USB Not Recognized Error
I noticed that my phone suddenly stopped being recognized on both my Windows 7 and Win8 laptops. I have been trying to fix it with the drivers but to no avail. However, I plugged my phone in with a different USB cord and voila it was recognized and working. Maybe this could possibly be a simple fix.
My computer stopped recognizing my Skyrocket
Hi Everyone,
I also am having trouble with my win 7 computer recognizing my Skyrocket suddenly. I have been using several KitKat roms and they have been working just fine, except for some reported bugs that the CM devs are working on. I even was able to connect to the computer and explore both my internal and external drives. Then suddenly that stopped and the computer gave me a need to get drivers warning. I've tried to download drivers from Samsung and the computer says they are already installed. I also tried the universal driver download and got the same message. Any help would be appreciated. Like the others on this forum, I wouldn't be able to odin if I got in trouble.
Thanks for your concideration,
drewfs7270
I switched to a different rom and now it's working again !
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Thanks.. :good: usefull
Also, any mobile manufacturer website has guides or direct downloads for drivers. Otherwise uni drivers suffice.....
Sent from my Nexus 5 using xda app-developers app
mtk preloader driver unable to install/unplugged appears
mt65xx unplugged when I try installing my device, I tried uninstalling all preloader vcom drivers in my laptop then restart and when I try to connect my device mtk mt65xx preloader just pops up in device manager then suddenly disappears and unknown device shows instead. I also tried manually update driver for unknown device then select the folder where my mtk driver is saved still unsuccessful? I've also searched and tried many other ways out there still no luck. Can anybody give me a solution? By the way i'm using windows 7 x64.
Delted
Edit: Deleted
soft brick
I face bad experienced, the tablet can not boot ( after install TWRP ) but enable to enter the fastboot mode and can be detected by the computer as android adb interface but adb can't communicated with the tablet. (list of devices atached)
I do have a backup file ( I make it before soft brick, I make backup using dd command, because I don't have cwm/twrp recovery ).... but how to flash it ? Tablet chipset is wonder media 8980 OS android 4.2.2
I can not flash it by adb/fastboot.
Maybe someone here can give me a little guide for how to....
I really appreciate for your kindness
Hey, I made an expirience, which might help other users as well.
I have a Sony device (Z1C) and use Windows 10, maybe this will help for other brands and for other Windows 10 users.
I installed drivers for my device and was able to use adb. When I put the phone into fastboot mode, it was not recognized anymore. I found out, Sony has a seperate (updated, maybe?) driver for fastboot mode. When I tried to install this, the driver was not signed and Windows refused to install it. However, you can enter the UEFI (successor of BIOS) and enable installation of unsigned drivers (at own risk). Then I was able to install the fastboot driver and controll my phone in fastboot mode as well as in adb mode.
In conclusion: You might think you installed drivers, because you did, but maybe you did not.
Even on LineageOS page, many people fail to mention that, you DON'T and SHOULDN'T install any generic or universal ADB driver if you have Samsung device. As you can just install Samsung USB Drivers officially from Samsung site. Samsung USB Drivers already contain ABD interface driver just fine so Universal ADB driver is redundant for Samsung phones.
Hi All,
After format of my PC few weeks ago, when I connect me OnePlus One, Win7 is not able to install drivers and I can't transfer any files from my PC to OpO. I tried Google drivers, SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0 , Universal_Naked_Driver_0.73, Universal Windows ADB Driver by Koush but nothing seems to work. I tried debug mode, MTP , nothing. I know it was so many times but I give up.
Windows 7 64bit version
Cyanogen OS 11.0-XNPH05Q
4.4.4 version
TWRP 2.8.0.1
Phone is rooted
Please help !
Dexterqfg said:
Hi All,
After format of my PC few weeks ago, when I connect me OnePlus One, Win7 is not able to install drivers and I can't transfer any files from my PC to OpO. I tried Google drivers, SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0 , Universal_Naked_Driver_0.73, Universal Windows ADB Driver by Koush but nothing seems to work. I tried debug mode, MTP , nothing. I know it was so many times but I give up.
Windows 7 64bit version
Cyanogen OS 11.0-XNPH05Q
4.4.4 version
TWRP 2.8.0.1
Phone is rooted
Please help !
Click to expand...
Click to collapse
Try to uninstall all the drivers, reboot and connect the phone. It did work for me....
I used Universal Naked Driver
I already tired it. Did not work
Dear all,
Please Help me. My One plus one is on CM12 official rom (rooted). Problem is when I connect my phone to computer and use ADB it is detected (adb devices: number & devices detected) but when in fastboot (fastboot devices : nothing is detected) I check in my device manager (yellow triangle on android ) My problem is why CAN it be detected when my phone is on but NOT during fastboot.
Necessary checks done : USB debugging, Universal driver, SDK installed, USB driver reinstalled again, tried changing usb ports on computer, tried on 2 laptops)
I am helpless, tried checking on forums can not find the answer.
CalvinVeez said:
Dear all,
Please Help me. My One plus one is on CM12 official rom (rooted). Problem is when I connect my phone to computer and use ADB it is detected (adb devices: number & devices detected) but when in fastboot (fastboot devices : nothing is detected) I check in my device manager (yellow triangle on android ) My problem is why CAN it be detected when my phone is on but NOT during fastboot.
Necessary checks done : USB debugging, Universal driver, SDK installed, USB driver reinstalled again, tried changing usb ports on computer, tried on 2 laptops)
I am helpless, tried checking on forums can not find the answer.
Click to expand...
Click to collapse
Have test to fastboot commands?
In fastboot be unplugged
Write
fastboot reboot
for test
Will answer wait for device
Plug device to test
My pc also does not recognise but work fine
with commands
geowolf1000 said:
Have test to fastboot commands?
In fastboot be unplugged
Write
fastboot reboot
for test
Will answer wait for device
Plug device to test
My pc also does not recognise but work fine
with commands
Click to expand...
Click to collapse
Tried adb reboot bootloader then phone boots into fastboot mode but from here..
is total no connection. Tried checking fastboot devices (nothing), fastboot reboot (waiting)
then i tried as u said unplug & plug in (not recognize) from here adb cannot be written anymore. (no more commands can be typed). Tried others like down loading Pdanet ,force install driver..Nothing works. Thinking ,did I corupt the bootloader while I was rooting it last time.?
I think if something was wrong with bootloader you could not either boot .
Do you use antivirus to pc?
Try without antivirus
What happening the false is from computer
Mine is reverse issue. When in fastboot mode, pc recognizes OPO, but when OPO is normally connected to pc, adb is not working. Its charging and can transfer data through USB, but OPO is not recognized through adb commands. Device Manager too recognizes my OPO only when it is in fastboot mode and not when normally connected via USB for data transfer.
I have a software, through which I can REVERSE TETHER my PC's internet to my mobile via USB. Because my OPO is not recognized via USB in normal mode, I can't do that. Any idea, what's wrong with my OPO.
(I have installed Android SDK and google usb drivers, for my OPO to work in fastboot. I have rooted. My pc runs on win7)
mrsureshisha said:
Mine is reverse issue. When in fastboot mode, pc recognizes OPO, but when OPO is normally connected to pc, adb is not working. Its charging and can transfer data through USB, but OPO is not recognized through adb commands. Device Manager too recognizes my OPO only when it is in fastboot mode and not when normally connected via USB for data transfer.
I have a software, through which I can REVERSE TETHER my PC's internet to my mobile via USB. Because my OPO is not recognized via USB in normal mode, I can't do that. Any idea, what's wrong with my OPO.
(I have installed Android SDK and google usb drivers, for my OPO to work in fastboot. I have rooted. My pc runs on win7)
Click to expand...
Click to collapse
Install pdanet+ for win
I am trying to unlock bootloader on a new htc one x(at&t) that i recently got. I have windows 10. When i connect my device to the computer it recognizes it easily. However, when i boot into fastmode, it doesnt recognize the device at all. i tried updating driver but nothing changed. What should i do???? please help me!
lPlease ignore. wrong forum
you probably need a PC running WinXP / Win7 to do it
the phone cant be recognized in Win8 or later even the HTC driver installed properly