anyone know of a good app or a setting in the GNote10.1 that will allow me to keep the display on while docked? my dock is at work and I would like to keep the screen on for calander, music and time stuff. Im guessing i can build something in Tasker, but I kinda thought it would be a setting. Only a day into playing with it so i could have easily missed something.
thanks!
Settings →Developer → Stay Awake
But then it stays awake, if you use the standard charger, too.
Related
Sorry if this has already been asked but is there a way to disable or mute notifications between certain times? Or at least email? This way the phone doesnt go off when I am asleep.
I use Sound Manager. Gives you the option to set the volume levels for media, system, notifications, etc and to set schedules for any of these. I use it to set my notification volume down low after 2:00am and to come back up to high volume around 8:00am and so far has worked just fine.
Tasker works great for this
Sent from my SAMSUNG-SGH-I897 using XDA App
Tasker probably can do that but its a ready complicated learning curve imo
Tasker rocks..definitely worth it...
I have the same thing..here is how to set it up in Tasker...
From 23:00 Til 07:00
Silent Mode On
That's it...
I also have it setup for an exception that if one of two people call me from work then it overrides and rings...
I have done a ton of stuff with Tasker -- like turning phone to vibrate during meetings, turning on gps automatically when I run certain programs (and then turn it off again when I close them), Play a sound when the plug becomes disconnected while charging, change the screen turnoff time when phone is charging, etc..
If you can't tell I love it.
Another plug for Tasker. It is awesome. The MacGyver part of my signature is brought to you in part by Tasker. And the letter A, for Awesome.
If Tasker seems hard to get into, check out their site for info: http://tasker.dinglisch.net/
A really nice use I have for it is automatically adjusting my screen brightness when plugged/unplugged.
fldude99 said:
Tasker probably can do that but its a ready complicated learning curve imo
Click to expand...
Click to collapse
Tasker does have a bit of a learning curve and if it's just simply turning off notifications, there are probably simpler solutions. But I love Tasker to bits. I have it set so between my usual bedtime hours, the phone goes silent, Screen Filter activates and dims it way down and Orientation turns off so I can lay down and read without it turning into landscape. I seem to always be finding new things to add and tinker.
Also recently added a function where the screen timeout goes away when Maps is activated. Got tired of losing the lock because it takes so darn long to get it back!
I use Volume Toggle - it is free (ad supported) and it has a bunch of different profiles you can customize.
It has a companion program "Volume Timer" (also free) that lets you set days and times for each profile.
I used to use Sound Manager but it decided to stop working, even after re-installing it still decided to quit after using it awhile.
I now use AudioGuru, it works great for scheduling volume settings for anything on your phone (System, Alarm, Ringer, Notifications, etc). Very easy to use and hasn't failed me yet. Recommended.
I use Silent Time Lite. It is free from the App Store and is very simple to use.
Sweet Dreams is available on the market and works great. Easy to use.
Thanks all, Tasker looks like it rocks. I will get it loaded. I like the "if bluetooth connected then read outloud the text messages", this way whenever I am in my car, it will read the tm! thats sweet.
Is there any way to prevent turning off the screen while charging / on cradle?
I need it to see clock 24/7 while my device is charging.
Now if I connect device to the PC it goes standby (while on lock screen, when the time is displayed), even if "screen timeout" is set to never.
Thank you!
FooisM said:
Is there any way to prevent turning off the screen while charging / on cradle?
I need it to see clock 24/7 while my device is charging.
Now if I connect device to the PC it goes standby (while on lock screen, when the time is displayed), even if "screen timeout" is set to never.
Thank you!
Click to expand...
Click to collapse
you didn't say which device you have, but if it's a focus then avoid this, you will get screen burn in
Bump...
I too am looking for this solution. Back in WM 5 and 6 we were able to set independent brightness and sleep times while on battery or while plugged in. I am on day 3 with this WP7 phone and am getting frustrated by the "simplification" of so many aspects that I was able to modify in the past.
If it's just the clock you need to see, then you might wanna try Nightclock, which is available for free in the marketplace. It shows a nice clock and has an option for preventing the screen from turning off.
While your lock screen does not require a password (pass number really) an extra menu item is added to the settings/lock&wallpaper/screen timeout drop menu... "never"
But if you require a password to unlock the screen, this "never" option disappears...
Unfortunately for me it is not just the clock.
While docked on my desk I like to keep it open on my SMS conversations to see if anything new has arrived.
While docked in my car on top of the dash, I like to keep it on maps to see if any traffic congestion might be ahead and listening to podcasts. Its rather distracting to keep watching for the screen to go dark and tap it every 5 minutes.
My antique alarm clock just died. I was thinking it might be possible to use my Xoom as a replacement but I cannot find a way to dim the screen while on it's docking station. The screen simply sleeps. Is there a way to use the Xoom in the cradle and have a setting to keep the screen active so one can see the time?
Thanks.
OracleBlue said:
My antique alarm clock just died. I was thinking it might be possible to use my Xoom as a replacement but I cannot find a way to dim the screen while on it's docking station. The screen simply sleeps. Is there a way to use the Xoom in the cradle and have a setting to keep the screen active so one can see the time?
Thanks.
Click to expand...
Click to collapse
Are you rooted? If so, there are apps to really dim the screen. If not, you could use Screen Filter.
Try 'alarm clock plus' in the market. Works great.
Tried three of the "Alarm Clock Plus" and they all did a force close. I didn't want to try all of them so I thought I would ask for specifics.
On the screen filter option, all it did was dim the screen and not show the clock screen. It also did a force close when trying to get to the settings.
Thanks though.
I have been using gentle alarm for months. It has a night display mode that I use and is not to bright.
I use superdim and it works well for me.
I go into the development section and turned on Keep Backlight On When Connected to USB then I use the standard clock, works perfect for me
Try one of the Nightstand clock apps by Digital Guesswork, Nightstand Bold has a dimmer control on the side.
while on the docking station you should be able to go to "clock" or if not choose it from your app drawer, it has a alarm option on the screen and by touching anywhere on the screen it will dimm. I am now on ics nightly but I think honeycomb was the same way, correct me if im wrong.
edit* - i also just realized that if you hold on the screen anywhere it will dimm to a different format of clock, so if this doesnt work on honeycomb i know it works on ics so if you can live without bluetooth and a camera (if your on honeycomb) which are the only thing currently not working that this will work as you described you wanted
scsa20 said:
I go into the development section and turned on Keep Backlight On When Connected to USB then I use the standard clock, works perfect for me
Click to expand...
Click to collapse
Just do this.
Development settings on Android to prevent screen from sleeping while plugged in.
Screen dims when it hits your auto sleep time limit instead of cutting the screen off.
I'm curious to if anyone knows of an app/widget that will keep the screen on and not lock the system when plugged in?
Basically whenever I try to play a SNES-emu or any game that uses my new Moga BT controller, the system goes into sleep after the 1 min(or whatever time is set), and this is the same if using mini-HDMI output.
I know this can be as easy as increasing the time and such, but i'm sure I will forget to rest it to stock and when I put the tablet in my bag it stays on all the time.
In the Developer Options, there's a setting for the screen to Stay Awake while charging...
Its safe to presume though that when you enable this, and that when you hook the dock up, it will stay awake as well?
Is there a way I can set up my S3 so that it always stays on, but ONLY when on the charging station. I want to use this as a clock for when I am in bed. I know I can change the settings to make the screen stay on but I don't want to have to do this manually every night, and more importantly have to remember to turn it off during the day . I have seen other threads talking about it turning off at night but I just thought it would be fine, even if I am in the office and charging it to be able to see the face just like a clock.
Good idea. I was also looking for a clock in my room. Maybe a watch face that has this shortcut on it. But probably it would be difficult to find a watch face with this feature and to like the face.