Team,
I am facing a peculiar problem on my Galaxy R.. Ever since I had upgraded from GB to ICS, I have been facing this issue.
During middle of the phone conversation, call goes blank for 15 seconds and disconnects.. This happens after 5-10 minutes into conversation and this is not a regular issue. Signal strength is good but can't single out the issue.
I had upgraded from GB to ICS - XWLP2 during December 2012 - problem observed - changed to Indian ICS - DDLP3 during February 13 - same issue observed - recently moved to CARBON ROM after following the procedure - baseband is still DDLP3..
Still facing the same issue..
Has anyone faced this issue before ? Any suggestions would be very helpful
PS : Have searched the entire forum - but no luck to find similar issue..
Folks.. I guess you haven't faced such issue before.. no replies but many views..
Any way, I had tried bit of troubleshooting today.. Since this was the problem ever since I upgraded from GB, I had downloaded the stock GB ROM (super stable - ZSLE6) and followed the specific procedure as mentioned in http://forum.xda-developers.com/showthread.php?t=2106424 to extract "modem.bin" from the tar file and flashed using ODIN..
So far looks good.. able to flash properly and test with couple of calls. Keeping my fingers crossed..Will observe for few more days and post here..
So now my current config is
CARBON ROM
ARDADAT Kernel
GB Baseband - ZSLE6..
I am on XXLQ3 baseband on cm10.1 and have not been having any issues at all.. maybe its a baseband issue... do check and revert..
Related
does anyone faced a problem of black screen "blacklight" on fresh ginger bread or custom roms that build from xxpq except miui and cm version ?? i have this problem when i end the call .. if i end the call by power button sometimes it acts normally but if the other person end the call the problem start and usually when i end the call by end button the blacklight appear ??? any sollution ... im on vurrut rom 5 with vurrut 5 kernel ..... thanks in advance
Note ; i have the solution since im using froyo with stock kernel and the problem repeated after updating to GB with stock kernel or other custom kernels
i never hear about this bug ... i don't think it's a bug.. explain it better..
Hi everyone
I've recently installed cm10 nightly 20121017 on my galaxy note ( using CM kernel, hydracore was causing black screen on boot .. )
Here's my main issue : ringtones are absolutely not working ! system tones & music are working like a charm, except I can't get a proper ringer to hear my incoming calls ..
Already missed a dozen call this far within two days ..
How to solve this problem please ? Do I have to backup everything if I wanna upgrade my version to a new one ?
Thanks
Having same problem with my Galaxy S GT-I9000. The latest CM10 nightlies have all the same problem.
Someone has a clue of how to fix this?
My solution was to install AOKP ROM Milestone n°1
solution ?
Make permission for your custom ringtone/alarm same as for systems.
See in system/media/... make R/W
See picture for sample
Wow, I have the same exact problem, and I have no idea how long it has been going on, and now it's starting to bug me. Anyone have a solution? And will this need to be submitted as a bug to the CM team?
Hey all i have a problem whit my lg p500,a week ago i flashed rom "oxygen 2.3.3" and my phone get turn off when i dont know (..i think cuz rom have bugs and i chose to change it,i find Miui 2.3.7 i instaled and this problem repeat again i find my phone off what i can do? please help me
"
Dont overclock too much.
729>
Issues with some specific build
BlackHeartt said:
Hey all i have a problem whit my lg p500,a week ago i flashed rom "oxygen 2.3.3" and my phone get turn off when i dont know (..i think cuz rom have bugs and i chose to change it,i find Miui 2.3.7 i instaled and this problem repeat again i find my phone off what i can do? please help me
"
Click to expand...
Click to collapse
When I used Cyagenmod 10 - specific builds I faced this issue. Later they fixed it.
FYI. Currently I am using the PAC version 19.9.0 ( Android 4.2.1) for my LG Optimus one P500 phone. It is giving some great look and feel. Smooth operations. Still Battery draining and 'no FM radio' support is the major minus in this build.
Hello
rameshkvp said:
When I used Cyagenmod 10 - specific builds I faced this issue. Later they fixed it.
FYI. Currently I am using the PAC version 19.9.0 ( Android 4.2.1) for my LG Optimus one P500 phone. It is giving some great look and feel. Smooth operations. Still Battery draining and 'no FM radio' support is the major minus in this build.
Click to expand...
Click to collapse
I find ,i tested now , you phone dont rebot on this rom?dont have problem whit this ?
Hi,
I am new to this forum so could not post this question to the original jelly shot 3.2 thread where a user has posted similar question
http://forum.xda-developers.com/showpost.php?p=39435005&postcount=1699
I am facing exactly same issue where the phone becomes unresponsive and dead until i pull out the battery and reboot it.
Seems like a sleep of death issue.
Tried fixing permission & clearing caches..but same issue.
ROM was installed by flashing ROMWiper first & then installing this.
Recovery: TWRP
ROM: JellyShot 3.2
Kernel: Marmite 7.2
Model: I9020T (T-Mobile Edition)
Let me know how i can resolve this issue or gather some logs for the ROM developer or move this post to the actual thread
Thanks,
Zoom
Try to format all/ wipe all and flash again...
I dont have any problem
leap_ahead said:
Try to format all/ wipe all and flash again...
I dont have any problem
Click to expand...
Click to collapse
Already tried flashing/wiping couple of times, but after 2-3days...it begans to show SOD!
Stock Jelly Bean was stable and never exhibited this behavior...neither i am overclocking
Any other debugging or logs i can gather to investigate this further?
Finally...nailed the culprit! Autokiller Memory Optimizer was causing those SODs...
Uninstalled & since then the ROM is working like mint...awesome smooth!
Thanks for the Great Work.
Hi thanks for all you have done for my phone! I mean it. THANKS. I post here because as a "new" member I cant post in the thread.
here is a problem I encountered when I had the [ROM][STABLE][Android 4.4.4] CyanogenMod 11 with 3.0.16 kernel [July 18, 2014] installed. My wi-fi interception signal is so weak now that I cant even connect to the same places I used to while I had the previous version. Why is that? I tried to install only the Kernel update, only the ROM and other tests. Same results.
I have already tried to find something in the forums but I cant find something other than another guys who has the same problem but still there was no answer. So, any advice?
I have a nearly similar problem.
I am on the slightly older version [ROM][STABLE][Android 4.4.4] CyanogenMod 11 with 3.0.16 kernel [July 1, 2014]. For a few days after installing the ROM the wifi reception was rather poor. When I used wifi for surfing the internet the phone would get very hot. Eventually the phone was unable to see any connections at all. Wifi is turned on but no connections are available. I fear the phone has been physically damaged due to high temperature.
The phone runs nice and cold now except for the missing connections.
My phone is a Sensation XE, S-OFF.
Exactly the same thing has happened to my daughters Sensation.
I have tried a factory reset and reinstallation but the wifi failure is still there.
Regards, Torben
Almost the same to me too. However I tried again another Rom (the previous version of the same rom) and everything works fine. I forgot to mention that I tried only the kernel update to sure that this is not the problem. It appears that the problem is the last version of the Rom.
I had Very weak wi-fi as well, with July 25th version of the ROM[ROM][STABLE][Android 4.4.4] CyanogenMod 11 with 3.0.16 kernel [July 25, 2014]. Got better after flashing the Aroma Kernel installer from the OP of that ROM thread.
Last Update didnt repaired WI-Fi
I also tried the same ROM in the 25th Version. Still the same problem even if I tried the Aroma Kernel update too... I guess I ll stay in Junes update which sometimes tends to crash... Eitherway the ROM is great.
Now that you mention it, i think i have noticed a slight reducing in WIFI signal since the last update. Im sure Sultan will look into this when he gets a spare moment.
Hi
I am back on sultans android 4.3 and wifi works again.
I have been enjoying a few of Sultan´s KitKat ROMS with no problems but now I cannot get wifi to work with any KitKat it seems.
My phone is Sensation XE, JuopunutBear S-OFF, 4ext 1.0.0.6 RC3.
Torben
Hi
Wifi works with [UnORom][4.4.4] CarbonRom for Sensation [29 July][Final] on my Sensation XE.
I have been very happy with Sultan's ROMs but sadly wifi is not working on my phone with his latest KitKats. Well, wifi does not report any problems, it just does not find any connections.
Torben
Solved
Actually it was my bad... I had a bad download.... my re-flash of the ROM had this installation completed .