Related
Hi all
Just recover the phone from dead boot, now it able to go into download mode. I just want to flash back to stock, going to do that with odin but it need the pit file. i've search the web, forum for the pit file but unable to locate one, if anyone have it or know where to dl please let me know
thanks
tdx3000 said:
Hi all
Just recover the phone from dead boot, now it able to go into download mode. I just want to flash back to stock, going to do that with odin but it need the pit file. i've search the web, forum for the pit file but unable to locate one, if anyone have it or know where to dl please let me know
thanks
Click to expand...
Click to collapse
If you can get into fastboot then don't use Odin. Assuming you have fastboot working use these
https://developers.google.com/android/nexus/images
http://forum.xda-developers.com/showthread.php?t=1785672&highlight=clean+install+4+1+1
http://forum.xda-developers.com/showthread.php?t=1572307&highlight=clean+install
the phone only go into download mode
Hi
could you please tell me how u were able to recover from dead boot...using which method & how were u able to go from download
thanks
tdx3000 said:
Hi all
Just recover the phone from dead boot, now it able to go into download mode. I just want to flash back to stock, going to do that with odin but it need the pit file. i've search the web, forum for the pit file but unable to locate one, if anyone have it or know where to dl please let me know
thanks
Click to expand...
Click to collapse
IndianKarmas said:
Hi
could you please tell me how u were able to recover from dead boot...using which method & how were u able to go from download
thanks
Click to expand...
Click to collapse
Just use any tool which is capable of repairing dead boot like Riff-box, Ort jtag and others
For me i use Riff-box to repair dead boots
Br
Msajum
I guess his phone bricked when he took the battery out when booting. And, when he uses Resurrector, he chosse galaxy s option, but not the Nexus S, then, the phone goes to download mode witch one always give the pit partition error.
Nobody (i guess) really know why this bug happens, but in the most of cases, it's about emmc, if you have an old phone, you can try, maybe...
How difficult is the hardware mod...I have zero experience with soldering but rather than having a dead brick would take chances ...tried taking phone to few phone guys in Toronto who had no clues...so thinking of trying hardware mod myself...would appreciate any guidance
samcortez said:
I guess his phone bricked when he took the battery out when booting. And, when he uses Resurrector, he chosse galaxy s option, but not the Nexus S, then, the phone goes to download mode witch one always give the pit partition error.
Nobody (i guess) really know why this bug happens, but in the most of cases, it's about emmc, if you have an old phone, you can try, maybe...
Click to expand...
Click to collapse
IndianKarmas said:
How difficult is the hardware mod...I have zero experience with soldering but rather than having a dead brick would take chances ...tried taking phone to few phone guys in Toronto who had no clues...so thinking of trying hardware mod myself...would appreciate any guidance
Click to expand...
Click to collapse
Don't do it then. You will destroy your phone completely.
Just look out for someone (in real-life) that can do it for you.
nexus s
samcortez said:
I guess his phone bricked when he took the battery out when booting. And, when he uses Resurrector, he chosse galaxy s option, but not the Nexus S, then, the phone goes to download mode witch one always give the pit partition error.
Nobody (i guess) really know why this bug happens, but in the most of cases, it's about emmc, if you have an old phone, you can try, maybe...
Click to expand...
Click to collapse
Hi
i have the same problem my nexus s shows download mode only when used galaxy s resurrector .
no output when nexus s resurrector.
plz help me
I didn't get any result. Now, what I know is that it might be a issue on EMMC chip. Thats all.
http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
problem loading
i downloaded the version micro_sim_s3_quadcore_dualcore_firmware_20130107 and when i try to flash it with sp flash tool i get the error that the phone is mtk6577 and the file is for 6575.Look the photo i have attached and let me know.
Do i do something wrong?
Beer Brand said:
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
Click to expand...
Click to collapse
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Beer Brand said:
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Click to expand...
Click to collapse
Do you mean the one called ''micro_sim_s3_quadcore_dualcore_firmware_20130107'' ?
I tried to flash with sp flash tool but i get error!Not compatible!When it flashes i get error ''the target platform is 6577s00''
I cant load it!
Why do you mean by saying universal?
https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
try this link this goes to all mtk657x chipsets.
Sent from my Nokia 5110 using Tapsilog and Kape
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
soulfreem said:
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
Click to expand...
Click to collapse
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
s3 clone
can this fix my s3 clone mtk6577?
Beer Brand said:
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
Click to expand...
Click to collapse
Is the link the same for the quadcore and dualcore?
Thank you for your help
zeldaaxe1 said:
can this fix my s3 clone mtk6577?
Click to expand...
Click to collapse
i also have issue with my s3 clone mtk6577... its no longer turning on after trying to odex it.. tried to flash the firmware and thats when the phone no longer turning on.. please help me.. im trying to flash it again using the flash tool but stuck in 0% what do i need to do?
I have the same problem. S3 micro sim clone MTK6589, new firmware tried (chinaecarts.com/s3firmware20130320.rar ), then the phone not booting.
I just contacted with Chinaecarts.com, they tried to solve the problem but not working.
Also tried with the universal firmware, but it sad I've MTK6577 phone, not MTK6575.
If I will have fresh news, will post it.
(seller said, I should send the phone back, and they will fix it.)
I tried with this:
H.tps://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
It is theoretically for the MTK6577 and MTK6589 as well. Got the previous result: "Platform error. The target platform is MT6577_S00."
I think there is a solution for the blank screen problem:
- need a Flash Tool. (on the link above you can find it, or on the link in my previous post)
- need a firmware for MTK6577 micro sim card.
I tried with many sdcard firmware versions, but no effective result.
Hi,
1, You need to know what is exact model of your s3 mtk6577. There are many s3 mtk6577 models in the market. Different s3 mtk6577 is made by different manufacturer, so the ROM is definitely different.
2. After you get the right ROM, then flash your phone by using flash tool SPMultiPortFlashDownloadProject
Bricked MTK6577
The image of the S3-micro-sim-version-20121210 this with corronpidos files, and the method that you should have done to retrieve your appliance was using the recover instead of SP tools because the files are not in rar. SP standard my phone so can enter META mode and nothing more.
soulfreem said:
http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
Click to expand...
Click to collapse
It looks I have the exact model of yours. I am trying to update the firmware by entering the recovery (I suppose it is {vol up + power}). But my external sdcard is not mounted to pick the rom from.
I hope this may help you? I had the same problems as you with the same phone after rooting it I deleted the original rom as it went into a loop and would not start so I started installing every firmware I can find and install, I got one which works BUT! no English , it boots English then goes into several languages but not English it is HDCI9300 rom. I googled it as no one seems able or do not want to help although I have asked several times in many different ways. I hope this will get your phone at least to boot up, I used sp flash as this rom will not let you do anything with the sd card (if it does you need to translate one of the languages)? I hope this helps, if not you have lost nothing:fingers-crossed:
Hello. I have a similar problem with yours. A friend of mine has a 100% visual clone (MTK6577) with the same sticker under the battery like in the first post, he tried to flash it, but he messed up something, and then he brought it to me completely DEAD . No charging, no PC connection - nothing... I tried many button combos, and accidentally i found out that if i connect the phone without battery, press and hold VOL+, VOL- & POWER for a few seconds, the PC detected the mediatek com port , installed the drivers without problem, and now the real problems begins - the ROM. I tried all of the roms from chinaecarts but without success, first i couldn't flash the thing, and after downloading several roms from chinaecarts, and finally flashed it and guess what - no LCD :silly: . So i tried combining different files from different roms, and now i'm at a point where i can turn on the phone, screen goes white, but the phone boots, it makes the vibration after the boot process completes, and after that the phone is responding to touches (it vibrates), lock/unlock works, PC detects USB Mass Storage Device, USB Composite Device and MTK65xx Android Phone. I also noticed that in the FW packages i downloaded there are some files that aren't flashed (i think) like for example the kernel.img so i was wondering if i can flash it manually? Please someone help, share some FW links, i can't find anymore...
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
help please!
brad_maliik said:
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
Click to expand...
Click to collapse
Try this (remove spaces): https:// hotfile.com/dl/207667730 /e94a926/6577_9300_650.zip. html
Hi All,
Need urgent help!!
I am new to Android Upgrade.. I am using Galaxy 3 gt-i5801. 2 days before when i connected my phone to laptop using samsung kies, it showed me that there is an upgrade available( froyo). I just thought of going for next android version and proceeded for the upgrade.. it went on well but my bad luck just before it completed, my laptop internet got disconnected and even after connecting internet it didnt proceed but failed..
soon after that, my Kies showed me the recovery console and i gave for recovery.. that too failed since my mobile was showing samsung logo but not the download mode..
so i just disconnected my phone and switched it off... now i am not able to boot my phone at all.,.
i tried all combinations like.., vol up,down,home,power etc.. nothing is working..
is this phone dead? as i can see in other threads that samsung service center guys will replace mother board n take 3000+ Rs for the same??
pls help me.. i dont want to spend so much for this now..! plss help me..
Thanks in advance!!
szpt9m said:
Hi All,
Need urgent help!!
I am new to Android Upgrade.. I am using Galaxy 3 gt-i5801. 2 days before when i connected my phone to laptop using samsung kies, it showed me that there is an upgrade available( froyo). I just thought of going for next android version and proceeded for the upgrade.. it went on well but my bad luck just before it completed, my laptop internet got disconnected and even after connecting internet it didnt proceed but failed..
soon after that, my Kies showed me the recovery console and i gave for recovery.. that too failed since my mobile was showing samsung logo but not the download mode..
so i just disconnected my phone and switched it off... now i am not able to boot my phone at all.,.
i tried all combinations like.., vol up,down,home,power etc.. nothing is working..
is this phone dead? as i can see in other threads that samsung service center guys will replace mother board n take 3000+ Rs for the same??
pls help me.. i dont want to spend so much for this now..! plss help me..
Thanks in advance!!
Click to expand...
Click to collapse
No ans even after one day
pls help me freinds !!
is there any way i can flash this using memory card?? my cell is not booting up at all
Does ur phone even shows the samsung logo?
No nothing.. i tried all the combinations but is not showing anything..
Maybe it hard bricked.
Try flashing stock rom manually via odin.
Do a google search for it.
Edit: connect ur phone to a pc without battery and try the button combos see if the pc detects ur phone.
Shreyash007 said:
Maybe it hard bricked.
Try flashing stock rom manually via odin.
Do a google search for it.
Edit: connect ur phone to a pc without battery and try the button combos see if the pc detects ur phone.
Click to expand...
Click to collapse
Tried by removing battery no luck
also searched google for flashing stock rom manually via odin.
the links which i got was explaining abt going to download mode and flashing it.. i cant go to download mode
Same Problem...
Same Problem here ... :crying:
After testing CyanogenMod 7.2 I flashed back to GT-I5800_XXJPU_XXJP4_OXXJPO_multi_xxx.7z via ODIN but after reboot I cannot switch on my I5800.
But maybe it's a hardware problem: About a week ago a line of (black) dead pixels appeared across the screen. :crying:
S-p-i-r-i-t said:
Same Problem here ... :crying:
After testing CyanogenMod 7.2 I flashed back to GT-I5800_XXJPU_XXJP4_OXXJPO_multi_xxx.7z via ODIN but after reboot I cannot switch on my I5800.
But maybe it's a hardware problem: About a week ago a line of (black) dead pixels appeared across the screen. :crying:
Click to expand...
Click to collapse
so no other way other than going to service center?
Well, i think u will be requiring a usb jig.Its a device which forces a samsung device into download mode even if its bricked.You can buy one online.
This is much cheaper than a new motherboard.Hopes it works.
Shreyash007 said:
Well, i think u will be requiring a usb jig.Its a device which forces a samsung device into download mode even if its bricked.You can buy one online.
This is much cheaper than a new motherboard.Hopes it works.
Click to expand...
Click to collapse
where can i buy this? could you pls give me the link if you can?
edit:
I can see below lines in usbjig.com
Code:
If your phone screen is always black, turn it on and if it stays completely black, then sorry, but NO USB jig will help you.
well if that's true then you have to go for replacing ur motherboard.
but still if you wanna try you can buy one on ebay.
Shreyash007 said:
well if that's true then you have to go for replacing ur motherboard.
but still if you wanna try you can buy one on ebay.
Click to expand...
Click to collapse
can i get that in ebay india?? i searched it and can see usb jigs for galaxy s2 but not for i5801 can u give me the link if you dont mind!
its available on ebay india.
i think that the one for s2 will work for galaxy 3 because they have similar micro usb socket.
Shreyash007 said:
its available on ebay india.
i think that the one for s2 will work for galaxy 3 because they have similar micro usb socket.
Click to expand...
Click to collapse
ok let me check that then
My Tablet was in the charger and it was turned off when i tried to power it , i found it was stuck in a boot loop
i tried to flash a stock ROM using using Odin 3.10 but still nothing changed,
i cant access the recovery mode using the power and volume up key,
but can access the download mode . please help me
Thank you
Got same problem
Ayman87 said:
My Tablet was in the charger and it was turned off when i tried to power it , i found it was stuck in a boot loop
i tried to flash a stock ROM using using Odin 3.10 but still nothing changed,
i cant access the recovery mode using the power and volume up key,
but can access the download mode . please help me
Thank you
Click to expand...
Click to collapse
I got same boot loop problem a week ago after installing a game. I couldn't get into recovery mode but I do have download mode. I have tried flash stock ROM multiple times and it always failed. Today, I brought my device to samsung service center. But guess what, even them couldn't help resolve the issue!!!
I hope someone here are able to help.
wiien said:
I got same boot loop problem a week ago after installing a game. I couldn't get into recovery mode but I do have download mode. I have tried flash stock ROM multiple times and it always failed. Today, I brought my device to samsung service center. But guess what, even them couldn't help resolve the issue!!!
I hope someone here are able to help.
Click to expand...
Click to collapse
Could they even identify the problem ?
Can you access Bootloader? And any custom recovery?
SuperMan(Alex) said:
Can you access Bootloader? And any custom recovery?
Click to expand...
Click to collapse
No i did n`t try , can u please refer to me a link , or explain to me what should i do exactly ?
Ayman87 said:
No i did n`t try , can u please refer to me a link , or explain to me what should i do exactly ?
Click to expand...
Click to collapse
and i cant use " USB Debugging"
http://forum.xda-developers.com/showthread.php?t=2102677
i tried this custom recovery but still looping
same here . i suggest trying different stock firmwares , if i get the fix for this problem i will tell u here
ameer3adel said:
same here . i suggest trying different stock firmwares , if i get the fix for this problem i will tell u here
Click to expand...
Click to collapse
Thank you
Ayman87 said:
Could they even identify the problem ?
Click to expand...
Click to collapse
Well, they said it hit the IC memory (cost around $200). so expensive :crying:
I've tried stock kitkat but still no luck
Ugh guys I'm having the same issues my tablet won't go pass Samsung Galaxy note 10.1 splash screen and can't stay on twrp recovery with out rebooting again. I tried to reflash twrp tar and stock firmware but it always fails and then my PC would say my USB driver or port is unrecognizable or malfunction so I bought another USB charging wire and tried it today and still get the same issues I hope someone can help me and us out asap!!
same here
Hi guys!
same here! my note was charging and I've found it stucked in samsung logo without any reason. I've tried to install almost every version available of stock rom also from different country but no way. I can install also custom recovery but unfortunately I don't have any custom rom to try to install in my sd card. At the current time I really thinking to move to new note 10.1 2014...I'm afraid is some kinda hardware malfunctions. Any update from you guys with same issue?
Andrea
afarnedi said:
Hi guys!
same here! my note was charging and I've found it stucked in samsung logo without any reason. I've tried to install almost every version available of stock rom also from different country but no way. I can install also custom recovery but unfortunately I don't have any custom rom to try to install in my sd card. At the current time I really thinking to move to new note 10.1 2014...I'm afraid is some kinda hardware malfunctions. Any update from you guys with same issue?
Andrea
Click to expand...
Click to collapse
Wow now I'm really start to think it is a Samsung and hardware issue I think these tablets weren't made to be usable for more than 2 years smh is anyone else with this issue running lollipop roms? Jc
The same here, My friend just conntect me, that SAMSUNG does not want to cover charges, due to bootloader says SYSTEM STATUS: custom.
And he never did anything with his tablet.
He got angry and Samsung check the hardware and they find that some chip is broken. But still don't want to fix it due to custom issue.
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
I have sent you a private message
Where to get firmware to this device? Astar-y3 v11 i search everywhere
rock6963 said:
I have sent you a private message
Click to expand...
Click to collapse
Mine is Astar-y3 v11 10.1 the board is GA10H_V1.1 20141110
I been search for the firmware everywhere without any luck
This rom will works fine for your tablet , http://www.filefactory.com/file/15k...X0233_DBL2855_ESP8089_GSL3675_HD_20150206.rar
Flash (iso) file for Softwinner V11 A33
Hy,
I am looking for flash possibilities, because I deleted settings app from my Softwinner V11 chinese tablet, and it stays at first logo.
Android Build: astar_y3_eng 4.4.2 KVT49L 20150403 test-keys
Vendor: sun8i
SDK version: 19
Thanks in advance
Attila
all winner v11 10.1" tablet
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
akapusy said:
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
Click to expand...
Click to collapse
i'll send a PM with links, asap
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
What about gps ? Tablet : softwinner 717
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
Hey, I got 2 similar tablets for my kids - both are plagued with malware that won't go away on factory resets - du speed booster, du battery meter, 'facebook' popups on bottom right corner (kids don't have FB).....
The tablet seems to be rooted, and there's a recovery already in place.
Could someone kindly give me a malware-free ROM to flash please ? Any maybe indicate how to go about it ?
Basic info should be fine - I've rooted and custom rommed a number of devices....
thanks a bunch!
David
Hi would anyone happen to have the links to this firmware s my astar-y3 10.1 tablets giving me trouble?
Cheers
digitiser dont work now
gewoonrobbie said:
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Click to expand...
Click to collapse
my digitiser does not respond at all
I can see that you have been bombarded.
Sorry that so many people are looking to you for a33 flash files and i am additionally sorry for adding to it. My a33-10ql-v1.1 flash file seems to be the "Bigfoot" of flash files. I cannot, for the life of me, find the file. I have been searching, relenlessly, since December last year. Im not usually one to stack on a full pile but i sure could use the help. If you could bring youself to find the time i would be forever greatful. Thank you, whether you can or cannot. Have a great evening.
A few days ago I rooted my phone, using ADB commands it let me but into bootloader but my phone didn't show the option to boot into recovery. It turned out i had to use another usb-c cable and then it did