Ok so this all started with me looking to root my phone, i had been looking around and had found out that my phone had an ics update i could only get from kies, i tryed and it wouldnt recognize my phone. So i looked into it and read that i had to use odin and flash in a previous version of the firmware to get kies to recognize it, during the process odin got stuck at the "NAND write start!!" message, i looked online and it said to pull the battery, so i did and since my phone has been stuck on the "firmware upgrade encountered an issue. please select recovery more in kies and try again." Obviously kies wouldnt work, so i did some searching and it seemed the phone was soft brick, i tryed putting it into download mode but i cant get anything but the firmware upgrade screen to show up, now odin recognizes the device so i followed the unbrick instructions on another page accidently forgot to uncheck the re-partition thing,so odin constantly gets stuck at either nand write start or setupconnection,. im at a loss for what to do and i cant seem to find the exact issue at all
The phone is a galaxy s blaze obviously, on tmobile
This should be in general.
Sent from my Provisioned Galaxy S Blaze
im_awesome_right? said:
This should be in general.
Sent from my Provisioned Galaxy S Blaze
Click to expand...
Click to collapse
Either way.
jimmy2989 said:
Either way.
Click to expand...
Click to collapse
Did you read the forum rules? It should be posted in General section.
Sent from my Galaxy S Blaze 4 G
Related
Emergency I tried to download the ifs leak followed all the right procedures and for some odd reason the system was not upgrading so I thought something was wrong so I unplugged the skyrocket and up came the screen saying use kies to recovery mode. Kies is not recognizing my device so now I am stuck I don't know what to do and I need my phone to breathe again ASAP. HELP PLEASE!!! I either need to put it back to stock or something idk all I know is that there has to be a way
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
My galaxy gear is showing the "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" screen. Is there anyway to recover from this? Neither Kies 3 nor Kies 2.6 is recognizing my device
.
Same here Odin doesn't do anything either. Has anyone else fixed this? Thanks!
About which Gear are you talking:
Gear 1, Gear 2 or Gear 2 Neo ?
Gear 1 . . . just downloaded an older firmware 4.2.2 and it installed using Odin 3 v185 so all good now
Sent from my SM-G900F using XDA Free mobile app
andrewpayne said:
Gear 1 . . . just downloaded an older firmware 4.2.2 and it installed using Odin 3 v185 so all good now
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
This didn't work for me. I used Odin3.07 and 4.2.2 stock ROM to flash first - I used PHONE option because the others didn't work (no progress in the message window). This 'faulty' flash came up with a 'UI stopped working error' when the Gear rebooted but I was able to get it into download mode now. I then used Odin 3.09 and the flashed the 4.2.2 as a PIT which worked fine!
Got there after reading through a lot of XDA threads and trying many things. But in the end, the answers were here. Thanks.
PS how I got into the mess (the firmware error message with the yellow triangle)? I was on null 23 and wanted to go back to stock rom so that I could sell the Gear. Couldn't get into download mode for Odin 3.09; I can't exactly remember what I did but I disconnected the gear midway through a seemingly failed flash and it got me to the error. Googling says use Kies but nope, it wouldn't recognise the gear even for the 'emergency firmware'. I tried a lot of things, and wasted a lot of time!
chobochobo said:
This didn't work for me. I used Odin3.07 and 4.2.2 stock ROM to flash first - I used PHONE option because the others didn't work (no progress in the message window). This 'faulty' flash came up with a 'UI stopped working error' when the Gear rebooted but I was able to get it into download mode now. I then used Odin 3.09 and the flashed the 4.2.2 as a PIT which worked fine!
Got there after reading through a lot of XDA threads and trying many things. But in the end, the answers were here. Thanks.
PS how I got into the mess (the firmware error message with the yellow triangle)? I was on null 23 and wanted to go back to stock rom so that I could sell the Gear. Couldn't get into download mode for Odin 3.09; I can't exactly remember what I did but I disconnected the gear midway through a seemingly failed flash and it got me to the error. Googling says use Kies but nope, it wouldn't recognise the gear even for the 'emergency firmware'. I tried a lot of things, and wasted a lot of time!
Click to expand...
Click to collapse
Worked perfectly, THANK YOU! After a few failed attempts at flashing my Gear I thought it was doomed, luckily after flashing the stock ROM back to it as you described I was successful at flashing the Tizen ROM. Thanks for your help!!
digital_carpenter said:
Worked perfectly, THANK YOU! After a few failed attempts at flashing my Gear I thought it was doomed, luckily after flashing the stock ROM back to it as you described I was successful at flashing the Tizen ROM. Thanks for your help!!
Click to expand...
Click to collapse
You're welcome. Glad to be of help.
I'm also having this issue.
can you share how to get odin recognise the gear, because now it's only showing yellow triangle with error text, and i cannot perform the step to go to download or recovery mode.
when i do long press on the gear it's only go black screen for awhile then back to error with yellow triangle.
thank you for the reply.
Update:
Already found solution, i just flash Null TWRP form odin and my gear return back to android, after that go to download mode, then flash to tizen.
z3phyrantes said:
I'm also having this issue.
can you share how to get odin recognise the gear, because now it's only showing yellow triangle with error text, and i cannot perform the step to go to download or recovery mode.
when i do long press on the gear it's only go black screen for awhile then back to error with yellow triangle.
thank you for the reply.
Update:
Already found solution, i just flash Null TWRP form odin and my gear return back to android, after that go to download mode, then flash to tizen.
Click to expand...
Click to collapse
but how did you flash Null TWRP i can not go to download mode and odin don not run from triangle mode.
PIT?
chobochobo said:
This didn't work for me. I used Odin3.07 and 4.2.2 stock ROM to flash first - I used PHONE option because the others didn't work (no progress in the message window). This 'faulty' flash came up with a 'UI stopped working error' when the Gear rebooted but I was able to get it into download mode now. I then used Odin 3.09 and the flashed the 4.2.2 as a PIT which worked fine!
Got there after reading through a lot of XDA threads and trying many things. But in the end, the answers were here. Thanks.
PS how I got into the mess (the firmware error message with the yellow triangle)? I was on null 23 and wanted to go back to stock rom so that I could sell the Gear. Couldn't get into download mode for Odin 3.09; I can't exactly remember what I did but I disconnected the gear midway through a seemingly failed flash and it got me to the error. Googling says use Kies but nope, it wouldn't recognise the gear even for the 'emergency firmware'. I tried a lot of things, and wasted a lot of time!
Click to expand...
Click to collapse
How did you run it as a PIT? I've been trying for a day now and can't get it to work.
peteamaro86 said:
How did you run it as a PIT? I've been trying for a day now and can't get it to work.
Click to expand...
Click to collapse
I just ticked the PIT box and browsed to the ROM file. Using the older Odin, that got me past the error message.
I think there are so many variables, we've probably tried many different combination of things. I'm just describing what worked for me, I can't promise it'll work for anybody else. Just wanted to put it out there so that it may help someone.
This worked for me
youtube{dot}com{slash}watch?v=fS4878klPAQ[ ( i cant post links yet so you will have to fix up the url or youtube search "How to UnBrick Galaxy Gear"
You must down load his rom to start of with after that you should be right to upgrade with Kies to tizen then to tizenmod if wanted or just load Null or what ever but this should unbrick the little [email protected]#$%^&*. Wish you luck
Samsung galaxy s2 error !
Hello, I have this error on my samsung galaxy s2 device; " firmware upgrade encountered an issue. Please select recorvery mode in kies and try again "
I have tried on many version of Odin but nothing works and the samsung software no detect the device.
Thanks for a clear explanation because I'm don't what to do ?
I'm not expert of flash with Odin.
Thanks a lot for your help.
:fingers-crossed:
chobochobo said:
I just ticked the PIT box and browsed to the ROM file. Using the older Odin, that got me past the error message.
I think there are so many variables, we've probably tried many different combination of things. I'm just describing what worked for me, I can't promise it'll work for anybody else. Just wanted to put it out there so that it may help someone.
Click to expand...
Click to collapse
That doesn't make any sense. Odin 3.09 asks for either a .pit file or an .xml file if you choose PIT.
How do you perform the null flash twrp? Could you give step by step guide. I got Odin 3 v18 too. firmware ready.
I searched most of the web for a week now, trying to figure out how to fix my Tablet on this nightmare.
so before it all began, i left my Tablet charging in midnight, left it in stand-by mode for 12 hours (yes i slept for 12 hours). when i woke up, it was on shutdown mode. i don't know why, i tried opening it, but it was stuck on Samsung Logo for nearly 2 mins. then i tried re-restart it again, and then i was stuck on "Samsung Galaxy tab 2 7.0". I can charge my Tab and it only has 80% battery for some reason. and so i asked someone from Yahoo Ask about how to fix this problem, i couldn't go to Recovery mode or start my tab, but everytime i try, it'll only get stuck at "Samsung Galaxy tab 2 7.0". Now, this guy said i should download a custom os or firmware or smth. (Forgot). and then i downloaded Odin, and a Firmware. for my GT-P3100.
I know i made a mistake, since i wanted to already fix my problem, i went to try anything i didn't actually know of. Now i have a problem, I didn't listen to "Don't turn off target" thing, and i shutdown my tab in the middle of using Odin, since most of the tries failed, Now i got the Firmware upgrade encountered an Issue.
I Tried using Samsung Kies to fix the issue, but it'll only get stuck on Connecting... i tried reinstalling the Drivers but nothing happened, then i uninstalled Kies. and then i download firmwares that might help me with my problem. but most of them failed.
i have 2 Firmware Stock for GT-P3100 Philippines. I really want to get my tab fixed already without a technician repairing it for me. so can you guys help?
I'm about to Download and try Jellybean Firmware, I Don't know anything about this problem nor these firmware. since i couldn't connect to Kies, i only tried fixing it on Odin.
Most of the Firmwares i tried failed. and every time i want to find some thread with the same problem as mine, i couldn't find anything.
i tried everything and it still wont work.
HELP!
._. It happened to me when i deleted System using the recovery mode e.e You should call samsung or buy another tablet ~i have 1 p3100~
Sent from my SM-G800H using XDA Free mobile app
Eddy_0205 said:
._. It happened to me when i deleted System using the recovery mode e.e You should call samsung or buy another tablet ~i have 1 p3100~
Sent from my SM-G800H using XDA Free mobile app
Click to expand...
Click to collapse
if i ran out of options, i have no choice but to get it fixed by some pro. i don't really know how it happened to my tablet : (
............................
HELP
Can someone help me, because I have a tab same isseu
I have GT-P3100 SamsungTab 2 (7''). Due to some reason its unable to boot normal and stuck at bootup logo.I try open recovery mode but fail.
I open download mode and try update firmware by ODIN3. But fail as USB and set disconnected in middle. After that phone unable to boot in download or recovery mode and always shows "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
I tried again with ODIN but unable to flash firmware. Tried CWM & firmware MD5 files but all fail. On ODIN3 (3.07) it shows success in tool but actually no impact on set. When try with ODIN3 (1.85) it saying fail to write NAND.
Is any way i can correct my Tablet?
Any suggestion will be welcomed.
Thanks in advance
Umamkgf
Hello Everyone,
I have a bricked Galaxy Note 10.1 (Verizon) SCH-I925.
The only thing I am able to get to is ODIN mode.
I have downloaded from sammobile; KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
and have tried to load it using ODIN versions 1.85, 3.07, and 3.13. They all come back with a invalid hash error when I try to load it.
I have also tried to use:
BOOTLOADER_ALL_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
CSC_ALL_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
MODEM_ALL_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
PDA_ALL_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
These just fail when I try to load.
When I connect my device to my computer, it shows up in device manager as a USB device. Is this correct or should it show as an ADB.
Any help would be greatly appreciated.
Its a USB device .
Hash error bad download first check .Second check wrong firmware/ bricked phone SEE multiple bricked phone posts .
Try KIES recovery .
Will not connect
Tried KIES, both versions, does not connect.
The only thing I can get into is ODIN on the device.
I have read many threads on here but have not seen an answer to unbricking a Verizon SCH-i925 Not 10.1.
Help please.
Awesomeaj said:
Tried KIES, both versions, does not connect.
The only thing I can get into is ODIN on the device.
I have read many threads on here but have not seen an answer to unbricking a Verizon SCH-i925 Not 10.1.
Help please.
Click to expand...
Click to collapse
Do you know anything about how it was bricked? Do you get the Samsung logo if you start it normally? You said only Odin is working, so I guess you also tried the recovery, does it just restart then or what happens in this case?
Don Carnage said:
Do you know anything about how it was bricked? Do you get the Samsung logo if you start it normally? You said only Odin is working, so I guess you also tried the recovery, does it just restart then or what happens in this case?
Click to expand...
Click to collapse
If I start it normally, I get the Samsung screen and then it goes blank. Recovery says "System software not authorized by Verizon Wireless has been found on your device. Please turn off your device and go to nearest Verizon Wireless store for help."
System bricked while trying to upgrade to Marshmallow. What I downloaded said it was for Verizon Model, but as soon as I tried to install the upgrade, that is when it bricked.
Awesomeaj said:
If I start it normally, I get the Samsung screen and then it goes blank. Recovery says "System software not authorized by Verizon Wireless has been found on your device. Please turn off your device and go to nearest Verizon Wireless store for help."
System bricked while trying to upgrade to Marshmallow. What I downloaded said it was for Verizon Model, but as soon as I tried to install the upgrade, that is when it bricked.
Click to expand...
Click to collapse
Just a heads up, no root or custom rom has been created for this specific model. Trust me, I am currently in the same boat as you. I have yet to find a solution.