Related
i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help
you may have to reflash via oden ,i'm not sure
try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too
Syfer_Fever said:
try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too
Click to expand...
Click to collapse
hmmmm but the stock rom has rfs file system and so cwm can't be used on it
cwm can't use for Backup stock ROM
and if cwm can't installed in stock ROM how can we use Custom ROM? lol
lol i see
i have to install cwm using oden before using any custom rom thanks dude i'm new here =D
Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium
andluv said:
Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Thanks dude..
Day is exactly what I did n it worked 4 me:beer::beer::beer:
Sent from my GT-S5670 using XDA
vikas1038 said:
i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help
Click to expand...
Click to collapse
I had this prob yesterdqy,,
You need to flash the original stock rom before you can flash another rom..
Flash the "S5670XXKPI" stock with ODIN,, after that, your SGFit will be fine... You can flash other rom qfter you flash the original rom..
Good Luck!..
Sent from my GT-S5670 using xda premium
I installed stock ROM S5670XWKTI. After, I installed CWM. Via CWM I can install customize ROM, but I do not want a custom ROM than the stock ROM. All custom ROM have bugs. For me the most stable stock ROM. For example. for me on the CWM not work mount / system, cash, etc.
Yesterday I tried on stock ROM install 14 toggles Galaxy Fit , but before that the CWM has to go to mount / system that does not work for me.
You cant mount system via cwm on stock rom because to mount system, it must be ext4 witch is not in stock rom.
Sent from my GT-S5670 using Tapatalk
Dude, the CWM by Tj style is for the ext4 system... and the stock rom is RFS..
You should flash the CWM by Vish coz it support the RFS system , not the Tj style vers..
Cmiiw..
Sent from my GT-S5670 using xda premium
you guys CAN install CWM v5 by tj_style in stock ROM, but it CANNOT backup stock ROM wich is RFS, if u on stock ROM and then install cwm v5 via odin and u can directly flash custom ROM via CWM
CWM by Vish coz link for download
pito2204 said:
CWM by Vish coz link for download
Click to expand...
Click to collapse
Link:
http://forum.xda-developers.com/sho...ighlight=clockworkmod+recovery+for+galaxy+fit
http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.
googler78 said:
http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.
Click to expand...
Click to collapse
How you used. With Odin or ...?
Please post all questions in the Q&A section.
Thread Moved
could some one help me out how to use Endymion v3.5 add-ons
i have downloaded the zip... flash it as i did with rom or something else
any help is appreciated
You have to flash the zip in recovery like you did the ROM. Once done you will see the themes in the theme manager tab of Endy control.
Sent from my Desire S
grayhawk11 said:
could some one help me out how to use Endymion v3.5 add-ons
i have downloaded the zip... flash it as i did with rom or something else
any help is appreciated
Click to expand...
Click to collapse
1. If you are flsahing the ROM for the first time after a full wipe, just flash Endymion_V3.5_addons.zip immediately after flashing the Endymion_V3.5_base_release.zip. Flash it just like you would flash any other zip from recovery.
2. If you have already installed Endymion 3.5 and started using it without the addons package, take a nandroid backup, boot into recovery, wipe dalvik and cache, then flash the Endymion_V3.5_addons.zip. Flash it just like you would flash any other zip from recovery.
enigmaamit said:
1. If you are flsahing the ROM for the first time after a full wipe, just flash Endymion_V3.5_addons.zip immediately after flashing the Endymion_V3.5_base_release.zip. Flash it just like you would flash any other zip from recovery.
2. If you have already installed Endymion 3.5 and started using it without the addons package, take a nandroid backup, boot into recovery, wipe dalvik and cache, then flash the Endymion_V3.5_addons.zip. Flash it just like you would flash any other zip from recovery.
Click to expand...
Click to collapse
thanx a lot...already started using without addons will flash it as soon i get tym
nandroid backup
i used 4ext recovery so a backup from that is also a nandroid backup or it has to be from cwm recovery
grayhawk11 said:
i used 4ext recovery so a backup from that is also a nandroid backup or it has to be from cwm recovery
Click to expand...
Click to collapse
No need to use CWM, 4EXT will do just fine.
grayhawk11 said:
i used 4ext recovery so a backup from that is also a nandroid backup or it has to be from cwm recovery
Click to expand...
Click to collapse
Both the recoveries use nandroid backups and are interchangeable with each other
Sent from a Desire S waiting for Kernel 3. WAKE UP HTC!!!!
enigmaamit said:
No need to use CWM, 4EXT will do just fine.
Click to expand...
Click to collapse
suku_patel_22 said:
Both the recoveries use nandroid backups and are interchangeable with each other
Click to expand...
Click to collapse
thanx a lot guys...installed ICE HD theme...loving it
Hi....
I am not from here.... Am from dhd section...
I got a galaxy R......
So I would have some questions regarding flashing and ROMs....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Thanks in advance...
Rk.....
Sent From The Future.....
rohithksaj said:
Hi....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
Click to expand...
Click to collapse
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
Click to expand...
Click to collapse
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Click to expand...
Click to collapse
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..
Nikhil said:
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..
Click to expand...
Click to collapse
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????
rohithksaj said:
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????
Click to expand...
Click to collapse
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.
Disturbed™ said:
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.
Click to expand...
Click to collapse
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Click to expand...
Click to collapse
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R
Nikhil said:
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R
Click to expand...
Click to collapse
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!
Nikhil said:
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!
Click to expand...
Click to collapse
ok....thanks......
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And wiping caches and factory reset will do everything? Don't we have to wipe system and other things.?
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Thanks in advance...
rohithksaj said:
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Click to expand...
Click to collapse
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.
You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.
Nikhil said:
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.
Click to expand...
Click to collapse
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
i understood how to flash the rom via odin but not recovery...
tell me how......
Adam77Root said:
You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.
Click to expand...
Click to collapse
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....
rohithksaj said:
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
Click to expand...
Click to collapse
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
i understood how to flash the rom via odin but not recovery...
tell me how......
Click to expand...
Click to collapse
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....
Click to expand...
Click to collapse
you can set any launcher to default, touchwiz launcher wont interrupt again!
Nikhil said:
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
you can set any launcher to default, touchwiz launcher wont interrupt again!
Click to expand...
Click to collapse
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Settings -> Language & Inputs -> change it to English (Just go by the icons)....
rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Follow the icon of Language and Input and click on language, select English then..
Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Delete the CC app.
Adam77Root said:
Delete the CC app.
Click to expand...
Click to collapse
Done... Everything is going nice and easy...
Thanks all for your support and replies......
:thumbup::thumbup::thumbup:
Sent from the future........
Can you use TWRP for flashing items that are flashed by Odin?
chinq said:
Can you use TWRP for flashing items that are flashed by Odin?
Click to expand...
Click to collapse
Nope. Odin flashes tar files, while TWRP flashes zip files.
Thanks
immortalneo said:
Nope. Odin flashes tar files, while TWRP flashes zip files.
Click to expand...
Click to collapse
Thanks for replying.
AT&T 4.04 Rom
chinq said:
Can you use TWRP for flashing items that are flashed by Odin?
Click to expand...
Click to collapse
I'll need a 4.04 rom that I can flash through TWRP since I'm not using Odin. :fingers-crossed:
4.04 rom for TWRP
immortalneo said:
Nope. Odin flashes tar files, while TWRP flashes zip files.
Click to expand...
Click to collapse
Do you know where I can get a 4.04 rom for TWRP?
chinq said:
Do you know where I can get a 4.04 rom for TWRP?
Click to expand...
Click to collapse
How can I know if you don't share what device you own?
Hi, I have tried to install a AOSP ROM (CM11-12, Omni 4.4-5.0..) on Aqua D2403, and it's always causes semibrick, never boots. I'm doing the installation process correctly, wipe data/cache, install rom and gapps.. Can some people helps me?
alemore99 said:
Hi, I have tried to install a AOSP ROM (CM11-12, Omni 4.4-5.0..) on Aqua D2403, and it's always causes semibrick, never boots. I'm doing the installation process correctly, wipe data/cache, install rom and gapps.. Can some people helps me?
Click to expand...
Click to collapse
Which recovery are you using?
linuxct said:
Which recovery are you using?
Click to expand...
Click to collapse
I'm using CWM.
Do you flash the recovery by zip or by fastboot?
rocapillon said:
Do you flash the recovery by zip or by fastboot?
Click to expand...
Click to collapse
I flash it by fastboot..
alemore99 said:
I'm using CWM.
Click to expand...
Click to collapse
Theres an specific version for aqua, check here http://forum.xda-developers.com/xperia-m2/general/d2403-easy-rooting-safety-unlocking-t3020662
linuxct said:
Theres an specific version for aqua, check here http://forum.xda-developers.com/xperia-m2/general/d2403-easy-rooting-safety-unlocking-t3020662
Click to expand...
Click to collapse
I've tried it few days ago, and it's doesn't boots on Philz Recovery.
alemore99 said:
I've tried it few days ago, and it's doesn't boots on Philz Recovery.
Click to expand...
Click to collapse
Then you installed two Recovery's at once?
Uninstall philz using the bat tool, the install the ROM using the cwm.
linuxct said:
Then you installed two Recovery's at once?
Uninstall philz using the bat tool, the install the ROM using the cwm.
Click to expand...
Click to collapse
I installed CWM, but it's only be able for use recovery one or two times, because it's causes bootloop, and then you have to flash the stock kernel. When I have restored the stock kernel, I install philz recovery, but as I say before this is not working for me..
alemore99 said:
I installed CWM, but it's only be able for use recovery one or two times, because it's causes bootloop, and then you have to flash the stock kernel. When I have restored the stock kernel, I install philz recovery, but as I say before this is not working for me..
Click to expand...
Click to collapse
Ah, I understand, then PhilZ not working ,but CWM yes.. Weird.
Can you try flashing the zip from Philz using the CWM? http://forum.xda-developers.com/xperia-m2/general/d2303-philz-touch-recovery-6-t3047492
Flashable: PhilZ Touch cwm6-flashable- new http://www.mediafire.com/download/m5fm7qb7et9x999/PhilZ_Touch_D2303_LB_flashable.zip
linuxct said:
Ah, I understand, then PhilZ not working ,but CWM yes.. Weird.
Can you try flashing the zip from Philz using the CWM? http://forum.xda-developers.com/xperia-m2/general/d2303-philz-touch-recovery-6-t3047492
Flashable: PhilZ Touch cwm6-flashable- new http://www.mediafire.com/download/m5fm7qb7et9x999/PhilZ_Touch_D2303_LB_flashable.zip
Click to expand...
Click to collapse
I already flash it, it doesn't work, the cyan led has appear if I touch vol- a few times, but it boots into system again..
alemore99 said:
I already flash it, it doesn't work, the cyan led has appear if I touch vol- a few times, but it boots into system again..
Click to expand...
Click to collapse
Weird. So you used the CWM to install the z4 experience right?
linuxct said:
Weird. So you used the CWM to install the z4 experience right?
Click to expand...
Click to collapse
Yes, because is the only one that have worked for me