Help me please..
My note died yesterday, started hanging while i was listening to music.
Tried to reset my note but now its stuck on Samsung Galaxy note 10.1 logo.
I'm using Omega Rom http://forum.xda-developers.com/showthread.php?t=2131474 for about 2 months with no problem encoutered until this one.
Can't access Recovery mode (just shows black screen but when i press the screen the device vibrates) - using Philz advance recovery
I can only access Download Mode, custom binary download: Yes (2 counts) and current binary/system status: both Custom
I tried flashing stock rom but failed
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8000DXUCMB1_N8000OLBCMB1_795498_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Get PIT for mapping..
<ID:0/040>
<ID:0/040> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried Flashing some n8000 note 10 pit files I've found searching on google but with no luck, saying that Re-partition operation failed.
Sorry if my english is bad, i am just desperate to fix my note T.T
F***** up partition information table .
You need a service centre repair but as you have no warranty it may be worth you trying to repair . See PIT info thread in development .
http://forum.xda-developers.com/showthread.php?t=2363703
I've tried the pit files for n8000 in the link you gave, still operation failed.
I guess i need to download stock ics rom in sammobile first as I only have stock jb available.
tnx btw
Did it Work?
So it's the same case for me too,
I was using Omega ROM. It was very good actually but one day it went to the boot screen and ceased there.
So I got the .pit files as mentioned above.
As you flashed 4.0.4 with the above pit file, did it work?
help me
hi friends & master
please help me
excuse me for question
I did not know what questions to ask
Is there any way to transfer games and apps to the internal storage with app2sd (moving apps & games in from system Rom to SD card(internal) no memory card)?
my system rom There is almost full
1.44 GB (148 MB free)
internal 12.6 GB (5.8 GB free)
SD card 12.5 GB (5.6 GB free)
I do not need to memory card
hi again
why long press and holding any app in menu not move in to info or recycle bin(for deleted) ?
this for all or me?
Unfortunately, flashing ICS stock or JB stock roms + pit file didnt work.
Tried different Odin versions to no luck.
Guess I need to send my note to samsung service center
So it's the same case for me too,
Here is a list of video on the Galaxy Tab 3 7in and the links to the XDA threads with instructions. Videos By ME
UPDATED 5-22-14
VIDEOS
<Mod Edit: Link removed for promoting paid service.>
TWRP INSTALL PLUS ROOT
CWM RECOVERY INSTALL
INFAMOUS TAB 3 INSTALL
TWRP RECOVERY NANDROID RESTORE
GALAXY TAB 3 UNBRICK AND RESTORE
GALAXY TAB 3 ROCKET TAB ROM
GALAXY TAB 3 CRASH ROM
GALAXY TAB 3 KIDS ROM
GALAXY TAB 3 SEAL ROM
GALAXY TAB 3 PHILZ CWM RECOVERY
GALAXY TAB 3 7IN ANDROID 4.2.2 MULTI WINDOW ROM PORT
Samsung Galaxy Tab 3 7in performance upgrade
Samsung Galaxy Tab 3 7in Inspire rom review & install
Galaxy Tab 3 7in KitKat Rom install and review
Samsung Galaxy Tab 3 TranchidaKat Rom install and review
More To Come
Link to a Index of info per devices INDEX OF ROMS RECOVERIES AND MORE
T110/T111:
T210/T210R:
T211:
T217S:
Tomsgt said:
Here is a list of video on the Galaxy Tab 3 7in and the links to the XDA threads with instructions. Videos By ME
UPDATED 10-2-13
ROOT
ODIN ROOT
ANOTHER ODIN ROOT
RECOVERY
TWRP
CWM
ROMS
INFAMOUS TAB 3
Stock Deodexed T210R
CM10.1 Test Build
MODS
KERNELS
BLACKHAWK
NO NAME
FIRMWARE
T210RUEAMG4
VIDEOS
STOCK RECOVERY
TWRP INSTALL PLUS ROOT
CWM RECOVERY INSTALL
INFAMOUS TAB 3 INSTALL
TWRP RECOVERY NANDROID RESTORE
Click to expand...
Click to collapse
hi!!!! will this root method work on the 10.1 inch tab 3 also??? help lol
hackstermind said:
hi!!!! will this root method work on the 10.1 inch tab 3 also??? help lol
Click to expand...
Click to collapse
no it is for the tab 3 7in only. if I had a 10in then I would love to make those videos also but sadly I dont sorry
OP updated
hi,
is this possible for samsung tab 3 7.0 LTE (t215) ?
stanleypeh said:
hi,
is this possible for samsung tab 3 7.0 LTE (t215) ?
Click to expand...
Click to collapse
I dont think thiese files will work on that model
Any idea where can I get root for samsung t215? Been hunting all over but couldnt find
stanleypeh said:
Any idea where can I get root for samsung t215? Been hunting all over but couldnt find
Click to expand...
Click to collapse
since the firmware for the t215 is available, it shouldn't be too hard pre-root the firmware and then flash it with odin.
and there's something interesting i've found... the recovery for the t215 boots on the t217s. i haven't tried to do anything with it to see if it's fully functional or not. i haven't tried flashing boot or anything else from the t215 firmware, because i don't want to risk breaking stuff without a working custom recovery.
Thank you for this list, It helped me a lot with my T210.
SM-T217S Root
Looking for the SM-T217S (Sprint's Tab 3 LTE) root... any help?
hotaru2k3 said:
and there's something interesting i've found... the recovery for the t215 boots on the t217s. i haven't tried to do anything with it to see if it's fully functional or not. i haven't tried flashing boot or anything else from the t215 firmware, because i don't want to risk breaking stuff without a working custom recovery.
Click to expand...
Click to collapse
Can this work with Sprint model:thumbup:
Sent from my SM-T217S using Tapatalk 4
Nope note for sprint sorry. The software is different
Sent from my SM-N900V using Tapatalk
Using something other than Odin to install Roms, CWM
Hi
My device 210R is already rooted but I have tried to install CWM using ODIN but after I hit the Start button it sits there and does nothing. I am using virtualbox with XP guest so that may be the problem. Everything up to that point works as per the video and it verifies the device and the MD5 of the recovery zip. I don't have a regular XP machine to try this, just using my MAC.
So is there anything else other than ODIN to achieve this? My goal is to flash a new ROM for my 7" Tab. I have root already.
Thanks
Paraic
paraic01 said:
Hi
My device 210R is already rooted but I have tried to install CWM using ODIN but after I hit the Start button it sits there and does nothing. I am using virtualbox with XP guest so that may be the problem. Everything up to that point works as per the video and it verifies the device and the MD5 of the recovery zip. I don't have a regular XP machine to try this, just using my MAC.
So is there anything else other than ODIN to achieve this? My goal is to flash a new ROM for my 7" Tab. I have root already.
Thanks
Paraic
Click to expand...
Click to collapse
does it show device added. and do you have a com number? if so it should work.
Tomsgt said:
does it show device added. and do you have a com number? if so it should work.
Click to expand...
Click to collapse
Yes it does and has a COM number just as the howto video shows. Everything looks like it should work but when you press START it just sits there saying "SetupConnection" as below:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM.builder.touch.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And it sits there indefinitely. The Samsung drivers are definitely there as I can browse the contents of the tablet mounted as SM-T210R in Explorer.
I'm a bit stumped and therefore was looking for an alternate method, perhaps using ADB on my MAC (or on XP).
Any help appreciated.
Paraic
P.S. it finally came back with this message:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
not sure what is failing to write here or why its having problems. I can create a New Folder on the Tablet using XP Explorer so it can write to the memory there.
I am on 4.1.2, Build jzo54k.t210rueamj1 kernel 3.4.5-1304745-user
paraic01 said:
Yes it does and has a COM number just as the howto video shows. Everything looks like it should work but when you press START it just sits there saying "SetupConnection" as below:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM.builder.touch.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And it sits there indefinitely. The Samsung drivers are definitely there as I can browse the contents of the tablet mounted as SM-T210R in Explorer.
I'm a bit stumped and therefore was looking for an alternate method, perhaps using ADB on my MAC (or on XP).
Any help appreciated.
Paraic
P.S. it finally came back with this message:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
not sure what is failing to write here or why its having problems. I can create a New Folder on the Tablet using XP Explorer so it can write to the memory there.
I am on 4.1.2, Build jzo54k.t210rueamj1 kernel 3.4.5-1304745-user
Click to expand...
Click to collapse
Well, it turns out it worked despite the error message!
I booted into Recovery using the Pwr vol up and Home keys and there is CWM in all its glory!
Thanks for help anyhow
*Happy Tab 3 Owner*:victory:
Glad you got it working. It is really weird that you got that error. O well.
Sent from my SM-N900V using Tapatalk
I just got a SM-T310
Got any ROM's for it?
---------- Post added at 12:38 AM ---------- Previous post was at 12:34 AM ----------
I just got a SM-T310
Got any ROM's for it?
New Rocket Tab rom video added to OP
SMT211 from China
Hi,
I'm a newbie. Got my first Android tablet in the form of Tab3 7" from China recently. It was later that I realized that they used a different setup.. a lot of other features / apps that weren't installed.. unlike the Note2 phone I got locally.
So upon reading through some of the posts here and elsewhere in the Net, I realized I needed to hack into this tablet to be able to maximize my use of this, in a way that I maximize my use of my Note2 (which isn't rooted, just installed apps from Google Play)...
As this is my first time in the world of rooting, flashing ROMs for Android (I've done a couple of jb on previous iPhone models).. I am quite lost on all the terms (CWM, ODIN, etc)..
My questions now are:
1. Is there a site that I can read up on the basics? Like the terminologies and why or why not those things should be done to an Android system? Pros and Cons of doing such?
2. I see on this site that there are ROMs for T210 model.. can I safely use these in place of the currently installed and running in my T211?
Thanks.
Hi i have a samsung Ace3 I used Odin3 , and used Touch Rar to flash it , didnt get to intalling the Rom as i couldn't navitage to the SD card properly, Anyhow how can i remove this CWS thing <ID:0/012> NAND Write Start!!
<ID:0/012> RQT_CLOSE !!
<ID:0/012> RES OK !!
<ID:0/012> Removed!!
<ID:0/012> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I need to send it of for warranty to be fixed for Antena repair. When i go to reset all in the phone it loops on boot up I cant seem to reset the phone. Not sure what it installed but i need it back to stock thanks
badboybubba said:
Hi i have a samsung Ace3 I used Odin3 , and used Touch Rar to flash it , didnt get to intalling the Rom as i couldn't navitage to the SD card properly, Anyhow how can i remove this CWS thing <ID:0/012> NAND Write Start!!
<ID:0/012> RQT_CLOSE !!
<ID:0/012> RES OK !!
<ID:0/012> Removed!!
<ID:0/012> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I need to send it of for warranty to be fixed for Antena repair. When i go to reset all in the phone it loops on boot up I cant seem to reset the phone. Not sure what it installed but i need it back to stock thanks
Click to expand...
Click to collapse
Basically you have to flash back an official stock firmware.
As there is no specific forum for your device on xda, you should check this [GUIDE] [Root] [CWM] Samsung Galaxy Ace 3 thread.
There you can find some useful descriptions how to flash back stock firmware to your device.
(E.g. search for "bootloop" in this thread, click the first hit and read the post directly after the found post. It contains a detailed description.)
If you still need help on this, please post your question in the General discussion > Questions and Answers forum.
Hello,
Have just got a used Note 4 unrooted with 5.0.1 firmware. Trying to root it using (CF-Auto-Root-trlte-trltexx-smn910f). Can't get Odin to flash it on the phone.
It seems like the phone somehow blocks everything from flashing. This is what I get after each attempt:
On the phone
UDC Start
SECURE CHECK: FAIL
In Odin
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
The same happens with any md5 i am trying to flash (TWRP/Philz). Went through all available forums and could not find any solution.
Re-activation lock disabled as never signed in to Samsung.
Has anyone got any ideas on this please
I would like to download the recovery of the stock j700m without the rom stock.
anyone know how to solve this problem
> Complete (write) operation failed.
<OSM> all completed threads.
(Succeed 0/1 failed
how to remove the TWRP recovery? to put the original recovery samsung