Im trying to install CM10, but i need to install bernie's uboot stuff.
I try to go into fastboot mode by using wkparts files but whenever i connect my phone without battery, OMAP4430 does not appear, and i cannot continue the process. How can i fix this?
xplicitjohn said:
Im trying to install CM10, but i need to install bernie's uboot stuff.
I try to go into fastboot mode by using wkparts files but whenever i connect my phone without battery, OMAP4430 does not appear, and i cannot continue the process. How can i fix this?
Click to expand...
Click to collapse
I have the same problem..
Try this before entering fast boot
Posted by xbsall:
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.
Sent from my LG-P920 using xda app-developers app
xplicitjohn said:
Im trying to install CM10, but i need to install bernie's uboot stuff.
I try to go into fastboot mode by using wkparts files but whenever i connect my phone without battery, OMAP4430 does not appear, and i cannot continue the process. How can i fix this?
Click to expand...
Click to collapse
berni987654321 said:
Try this before entering fast boot
Posted by xbsall:
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
I have the OMAP driver already installed, but after running the omap4boot still nothing happens...
P.S.: Sorry for my english
Are u following the instructions
1 run omap boot
2 connect the phone with no battery
3 as soon as u see a script running insert battery DONT WAIT FOR THE 5 seconds
sent from my lg o3d
a piece of advice:
don't ask alot ..go read.
3 as soon as u see a script running insert battery DONT WAIT FOR THE 5 seconds
I don't see the script running
VladimirCicanci said:
3 as soon as u see a script running insert battery DONT WAIT FOR THE 5 seconds
I don't see the script running
Click to expand...
Click to collapse
if you don't see any script , you did'nt use omap boot , run it chose option 2, pull out battery press vol up , plug phone , omap drivers should be recognize (check in the device manager while doing this ) then pull back the battery without waiting 5 sec as the script tells you , U should see the grey LG logo ( mean that you are in fastboot mode ) , you may also see a new device in device manager called " LG COSMO " or something like that , the drivers are also in the omapboot folder
apologize my english
Yeah just like that also make shure u have omap drivers installed also manually
sent from my lg o3d
a piece of advice:
don't ask alot ..go read.
alphatia said:
Yeah just like that also make shure u have omap drivers installed also manually
Click to expand...
Click to collapse
All is done guys, thanks a lot!
anytime
sent from my lg o3d
a piece of advice:
don't ask alot ..go read.
I see omap4430 but the drivers keep disconnecting and reconnecting.
edit : im in fastboot now, but now when i try to flash things, it keeps saying < waiting for device >
edit 2 : in my device manager, OMAP4430 Fastboot usb device says that it Cannot start the Device . I have tried deleting the drivers and reinstalling, still the same error.
i enter the fastboot mode but then i get stuck after insert the command to flash
OMAP4boot for P920/P720/SU540/SU760/SU870
-------------------------------------------
by wkpark at gmail dot com
1. Prada 3.0 (SU540/KU5400/P940)
2. Optimus 3D (SU760/P920)
3. Optimus 3D Cube (SU870/P720)
x. Exit
-------------------------------------------
Please select 1,2 or exit(x): 2
Optimus 3D selected...
waiting for OMAP44xx device...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
reading ASIC ID
usb_write 4
usb_read 81[*] read 0 bytes
NumOfSubblocks: 0x5
Subblock ID: 0x1
Subblock Size: 0x5
CH enabled: 0x7
ROM revision: 0x3
Checksum Subblock: 0x15
CHIP: 4430
IDEN: 32c8ec90b5aed20c91f78a648de879a3de760dab
MPKH: 5f4092eccddf90fa43f546adf89508b31b9c74795e9516194c 0ea6412fdcb7f6
CRC0: 0983f41c
CRC1: 139c4f4f
sending 2ndstage to target... f0030002
usb_write 4
usb_write 4
wait 5-seconds...
[*] msg size = 4
usb_write 21504[*] data size = 21504
usb_close
Reopen usb...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb read = aabbccdd
accepted 2ndstage response
sending image to target...
size = 254252
usb_write 4
usb_write 254252
** Done **
------------------------------
Please remove USB cable
and wait until LG Logo on
then reconnent USB cable again
------------------------------
Microsoft Windows [Versão 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Todos os direitos reservados.
C:\Users\moraisbranco\Desktop\ics\omap4boot-for_optimus-v1.17b\omap4boot-for_opt
imus-v1.17b>fastboot flash u-boot u-boot.img
< waiting for device >
i get this problem. any help? only backlight on phone lights. no logo
--------------------------------------------
OMAP4boot for P920/P720/SU540/SU760/SU870
--------------------------------------------
by wkpark at gmail dot com
[1] cx2 - Optimus 3D Cube (SU870/P720)
[2] p920 - Optimus 3D (P920)
[3] p940 - Prada 3.0 (P940)
[4] su540 - Prada 3.0 (SU540/KU5400)
[5] su760 - Optimus 3D (SU760)
[x] exit
-------------------------------------------
Select device and <ENTER> 2
p920 selected
waiting for OMAP44xx device...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
reading ASIC ID
usb_write 4
usb_read 81
[*] read 0 bytes
NumOfSubblocks: 0x5
Subblock ID: 0x1
Subblock Size: 0x5
CH enabled: 0x7
ROM revision: 0x3
Checksum Subblock: 0x15
CHIP: 4430
IDEN: 17d9312b8da001375775a08af4da03d174a8f83e
MPKH: 5f4092eccddf90fa43f546adf89508b31b9c74795e9516194c0ea6412fdcb7f6
CRC0: 0983f41c
CRC1: 139c4f4f
sending 2ndstage to target... f0030002
usb_write 4
usb_write 4
wait 5-seconds...
[*] msg size = 4
usb_write 21504
[*] data size = 21504
usb_close
Reopen usb...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb_read got: 0, expected: 4, errno: 31
usb_read got GEN_FAILURE - got: 0, expected: 4, errno: 31
usb_read failed: 31
usb read = 0
unexpected 2ndstage response
start_fastboot.sh: usbboot: Invalid argument
------------------------------
Please remove USB cable
and wait until LG Logo on
then reconnent USB cable again
------------------------------
fastboot devices (y/N) ? and press <ENTER>
paultje162 said:
i get this problem. any help? only backlight on phone lights. no logo
--------------------------------------------
OMAP4boot for P920/P720/SU540/SU760/SU870
--------------------------------------------
by wkpark at gmail dot com
[1] cx2 - Optimus 3D Cube (SU870/P720)
[2] p920 - Optimus 3D (P920)
[3] p940 - Prada 3.0 (P940)
[4] su540 - Prada 3.0 (SU540/KU5400)
[5] su760 - Optimus 3D (SU760)
[x] exit
-------------------------------------------
Select device and <ENTER> 2
p920 selected
waiting for OMAP44xx device...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
reading ASIC ID
usb_write 4
usb_read 81
[*] read 0 bytes
NumOfSubblocks: 0x5
Subblock ID: 0x1
Subblock Size: 0x5
CH enabled: 0x7
ROM revision: 0x3
Checksum Subblock: 0x15
CHIP: 4430
IDEN: 17d9312b8da001375775a08af4da03d174a8f83e
MPKH: 5f4092eccddf90fa43f546adf89508b31b9c74795e9516194c0ea6412fdcb7f6
CRC0: 0983f41c
CRC1: 139c4f4f
sending 2ndstage to target... f0030002
usb_write 4
usb_write 4
wait 5-seconds...
[*] msg size = 4
usb_write 21504
[*] data size = 21504
usb_close
Reopen usb...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb_read got: 0, expected: 4, errno: 31
usb_read got GEN_FAILURE - got: 0, expected: 4, errno: 31
usb_read failed: 31
usb read = 0
unexpected 2ndstage response
start_fastboot.sh: usbboot: Invalid argument
------------------------------
Please remove USB cable
and wait until LG Logo on
then reconnent USB cable again
------------------------------
fastboot devices (y/N) ? and press <ENTER>
Click to expand...
Click to collapse
No need to multi post
Sent from my LG-SU760 using xda premium
Who need help for fastboot send me a private message with your messenger ID and i'll help you fastest i can.
Good luck.
I also got it working on my win7-32bit. So i went to my parents desktop win7-64bit and it worked out just fine without installing any drivers. (i dont know what they have done on that pc before )
ive just followed this thread http://forum.xda-developers.com/showthread.php?t=2144738
and this was the output from the window
Code:
wait 5-seconds...
[*] msg size = 4
usb_write 21504
[*] data size = 21504
usb_close
Reopen usb...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb read = aabbccdd
accepted 2ndstage response
sending image to target...
size = 255028
usb_write 4
usb_write 255028
** Done **
< waiting for device >
sending 'recovery' (6187 KB)...
OKAY [ 3.219s]
writing 'recovery'...
OKAY [ 0.766s]
finished. total time: 3.984s
You chooesd ICS//TWRP Recovery
waiting for OMAP44xx device...
when i try any combination of keys to go into recovery its just a black screen. any ideas? id it actually finish? when it says waiting for omap44xx device i tried unplugging and plugging in the cable but it did nothing
just tried to reboot normally and it says security error
if anyone can get this up and running ill thank every one of their posts for a week... i cant believe its gone wrong for me AGAIN
seriously panicing now, cant get into SW mode, i can get into fastboot and SW via wpark but the flash wont go past 17%
flash process now gets to 30% and quits
I got security error as well with that tutorial. Flashing bootloaders and recovery using this http://forum.xda-developers.com/showthread.php?t=1978543 helped.
Also - I used SmartFlash to flash bin and fls
Qualcomm based chipset phones are fixed through QPST tool. One of the software provided QPST is eMMC software download which helps to fix corrupt bootloader and emmc partitions. BUT SOMETIMES THE BOOTLOADER REPAIR IS NOT SUCCESSFUL.
The PURPOSE OF THIS THREAD is to know what is causing the errors and provide solutions.
The eMMC software creates log files like Dload_COMxx.dbg which can be found under C:\ProgramData\Qualcomm\QPST in Windows 7 PC.
I am encoutring "Image Download Failed. Cookie (if present) not received" error in eMMC download. Here is the log file:
2013/07/03 14:15:55.095 Restart timeout set to 10 seconds
2013/07/03 14:15:55.095 StartSB2Download
2013/07/03 14:15:55.095 Begin SB2.0 Software Download
2013/07/03 14:15:55.095 Skip Reset: 1
2013/07/03 14:15:55.095 Lock phone
2013/07/03 14:15:55.095 Examine phone mode
2013/07/03 14:15:55.111 Get partition file name
2013/07/03 14:15:55.111 User specified flash programmer:
2013/07/03 14:15:55.111 Flash Programmer file:
2013/07/03 14:15:55.126 Examine phone mode
2013/07/03 14:15:55.126 Mobile not in download mode!
2013/07/03 14:15:55.126 SynchronizeConnection starting...
2013/07/03 14:15:55.126 Sending Hello to flash programmer...
2013/07/03 14:15:55.126 Disabling automatic polling.
2013/07/03 14:15:55.189 Try Hello with polling disabled...
2013/07/03 14:15:55.189 Try Hello with polling disabled...
2013/07/03 14:15:55.189 Try Hello with polling disabled...
2013/07/03 14:15:55.189 SynchronizeConnection succeeded.
2013/07/03 14:15:55.189 Sending Hello Packet
2013/07/03 14:15:55.204 Version info = 5 2
2013/07/03 14:15:55.204 Block size = 400
2013/07/03 14:15:55.204 Flash base = 0
2013/07/03 14:15:55.204 Device Name=eMMC:
2013/07/03 14:15:55.204 Flash ID size= 4
2013/07/03 14:15:55.204 Sectors = 128
2013/07/03 14:15:55.204 Feature mask = 0x09
2013/07/03 14:15:55.204 Sending Close 0
2013/07/03 14:15:55.204 Log: Cannot close when not previously opened
2013/07/03 14:15:55.204 ARMPRG error: 15, text: Cannot close when not previously opened
2013/07/03 14:15:55.204 CloseDownloader error
2013/07/03 14:15:55.204 Sending Security Mode 1
2013/07/03 14:15:55.204 eMMC user image present - skipping partition table
2013/07/03 14:15:55.220 eMMC user image: C:\flare repair files\8X25_msimage.mbn
2013/07/03 14:15:55.220 Opening eMMC USER file
2013/07/03 14:15:55.220 Opening eMMC USER mode
2013/07/03 14:15:55.220 Sending MI Open mode 33 size 0
2013/07/03 14:15:55.579 Log: Open multi failed, unknown error
2013/07/03 14:15:55.579 ARMPRG error: 7, text: Open multi failed, unknown error
2013/07/03 14:15:55.579 Download end, status 103, error 852
2013/07/03 14:15:55.579 Exit SB 2.0 download with status 0x00000000
a have a htc one m8s where do i get the xml file and the patch please
To load raw images to a device you will likely need a signature. Even low level tools like QFIL, for example, require MBN files which are essentially keys to the device.
Hello all ,
I linked a serial cable to my allwinner a20 based Android Tv box.
It can not pass after the boot logo and next is all what it display in serial console.
Somebody pelase help i need to reisntall linux on it ,if you knwo any u boot keys that i have to press on the uboot serial consoel pelase help.I tryed to press ransom keys but i see nothin.
Here is all i see when it start:
====================================
HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =512
sum=0x9c3bd8cf
src_sum=0x9c3bd8cf
Ready to disable icache.
Jump to secend Boot.
[ 0.133]
U-Boot 2011.09-rc1-dirty (Nov 08 2013 - 11:06:32) Allwinner Technology
[ 0.141]version: 1.1.0
[ 0.144]pmbus: ready
axp read error
probe axp20x failed
axp_probe error
boot_clock = 912
dcdc2_vol = 1400
axp set dcdc2_vol to 1400 failed
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = -1
usb_recovery = 0
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.293]DRAM: 512 MiB
relocation Offset is: 15b27000
user_gpio config
user_gpio ok
DRV_DISP_Init: opened
[ 0.560]boot_disp.output_type=2
[ 0.563]boot_disp.output_mode=5
[ 0.567]boot_disp.auto_hpd=1
workmode = 0
[ 1.871]NAND: NAND_UbootInit
NB1 : enter NAND_LogicInit
nand : get id_number_ctl from script, 3
not burn nand partition table!
NB1 : nftl num: 3
init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[ 2.381]sunxi flash init ok
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:12-
-name- -start- -size-
bootloader : 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 20000000
recovery : 24000000 2000000
databk : 26000000 2000000
misc : 28000000 1000000
private : 29000000 1000000
sysrecovery : 2a000000 21000000
data : 4b000000 40000000
cache : 8b000000 17000000
UDISK : a2000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 6, low 4
cant find fstbt value
Fastboot detected, will boot fastboot
to be run cmd=run setargs_nand boot_fastboot
the user data'magic is bad
WORK_MODE_BOOT
board_status_probe
sunxi_bmp_display
WORK_MODE_BOOT
[ 2.509]Hit any key to stop autoboot: 0
run usb fastboot
sunxi_fastboot_init
recv addr 0x41000000
send addr 0x582580a8
delay time 0
usb init ok
------------------------------------------------------------------
After this nothing .Please help me
After searching all google and reading documantation ,I contacted the box seller and he gied me the files i neeeded.
I used a image file named sun7i_A20v2.0_android_sugar-ref001_2014.09.04_TakenYBSJ.img and a windwos software to flash it via usb named PhoenixPacketV333
To flash teh device you muist hava a serial console to the box (veru easy to do if you have the cable ) ,and keep pushed the key 2
on serial consle (putty) while powering the device ,so it enter in fel mode ( something like recovery mode ,it accept usb connection) .Then oyu need a usb male to male cable to conect the android tv box usb port to the windows usb port ,and start flasing using the PhoenixPacketV333 software.
If somebody needs more help or files just write here I check daily .
have a nice day all!
I wanted to upload new rom to my Nokia TA-1188 via SP_Flash_Tool-5.1916_Linux.
Rom: https://drive.google.com/uc?id=1ORCq7T2H8ECCjqd4SDn9uODsGhKFcoff&export=download
and I have error:
$ ./flash_tool.sh
QObject::moveToThread: Cannot move objects with a parent
support_dl_cert_to_storage: 0
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1665148920.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
DA Connected
executing DADownloadAll...
Stage:
[0] WRITE TO PARTITION [ preloader ]
Stage:
[4] WRITE TO PARTITION [ custom_a ]
Download failed.
Disconnect!
BROM Exception! ( ERROR : STATUS_SEC_IMG_TYPE_MISMATCH (-1073610710) , MSP ERROE CODE : 0x00.
[HINT]:
Verified boot is enabled.
Please download signed image(custom_a-verified.img) or disable verified boot.)((exec,../../../flashtool/Cmd/DADownloadAll.cpp,84))
Click to expand...
Click to collapse
and now I can't start fastboot mode on the phone and the phone can't be turned on.
I try:
- Vol- and usb kable to computer - 30s wait - nothing
- power on buttom - 60s wait - nothing
- https://forum.xda-developers.com/t/hard-reset-nokia-2-2.4000739/#post-81795587 - nothing
What did I do wrong and how to fix it?
Is my phone just for trash, or is it possible to get it working somehow?
Help please.