Database Info

Tf700 roms on tf300t

Hi guys i've been looking through the forums and i have noticed that the tf700 users can flash our roms! I was wondering did anyone try flashing one of their roms with our device?
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

Just checked over there we have more updated roms anyway there development seems slow that why they have to port ours lol.
Sent from my SGH-I717 using xda app-developers app

I agree but in the long run development for their device should pick up and surpass the development we have for ours. So if we find a way to use there roms it will lengthen the amount of content for our tablet.

BUMP! I'd like to get an answer to this as well. It seems that everything is the same other then an LED. Has any tried flashing one of their Roms?

I flashed the TF700 Stock Rom Was trying to get back to ICS. Stock flashed and was running. But then you have the tf700 bootloader
So you can flash them.

mikaole said:
I flashed the TF700 Stock Rom Was trying to get back to ICS. Stock flashed and was running. But then you have the tf700 bootloader
So you can flash them.
Click to expand...
Click to collapse
Hum... does this means that we will have 1.5Ghz kernel on our TF300T ?

[Q] Is it not possible to flash ics bootloader after having installed jb ota?

Why isn't it possible to flash ics bootloader after having installed jb bootloader? I have done the opposite on other devices

henno87 said:
Why isn't it possible to flash ics bootloader after having installed jb bootloader? I have done the opposite on other devices
Click to expand...
Click to collapse
Because Asus has given us a new bootloader which asks for a special signiture in the rom you are flashing. ICS don´t have them, so it is not possible.

mikaole said:
Because Asus has given us a new bootloader which asks for a special signiture in the rom you are flashing. ICS don´t have them, so it is not possible.
Click to expand...
Click to collapse
Although I thank you for the answer, my question wasn't why we can't flash ICS ROMS, my question is why we can't flash ICS bootloaders in order to be able to flash ICS ROMS.

henno87 said:
Although I thank you for the answer, my question wasn't why we can't flash ICS ROMS, my question is why we can't flash ICS bootloaders in order to be able to flash ICS ROMS.
Click to expand...
Click to collapse
becouse recovery too has this signature - basically the difference between an ics custom recovery and a jb custom recovery is that they copied the jb kernel to the latter, or it wont work too.
its a new security feature that google added to jb but asus is using it in a weird way, once you do a jb upgrade you wont be able to run any kernel without this feature, which is not supported by ics.

there must be a way ... i want to flash CM9

I'm not sure why would you want an ICS ROM in Jelly Bean era.
Check out this thread, it's the best JB ROM I've tried.
http://forum.xda-developers.com/showthread.php?t=1854212
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

rich.x87 said:
I'm not sure why would you want an ICS ROM in Jelly Bean era.
Check out this thread, it's the best JB ROM I've tried.
http://forum.xda-developers.com/showthread.php?t=1854212
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
you can run Jelly Bean Roms which are Cyanogenmodbased on ICS bootloader - any questions left?

Can't you flash CM10 on JB bootloader?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

rich.x87 said:
Can't you flash CM10 on JB bootloader?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
Unfortunatly not (yet?)
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

Install Cyanogenmod 4.2 using TWRP?

Hi
Im currently running CleanRom 3. I want to try out the new Cyanogenmod 4.2. In the description it says CWM, but i use TWRP [latest one i think]. Is it possible to install it without installing clockwork?

No U can't. Cyanogenmod after succesfull instlling, will modify CWM recovery. If you had TWRP, It would hard brick your Tablet. I'm not Quite Sure, but everyone installs CM on CWM. You'd better be carefull if you don't want to have very expensive desk.
Sorry, becouse my english isn't very well, I hope I helped you.

I use Twrp 2.2.2 all the time and. No issues with any of the 4.2 roms.

Yes you can use twrp. Just make sure you use the latest version add that is fixed for multi user support introduced with 4.2 jelly bean. Goto twrp website to make sure you have the latest. That guy in the first reply is wrong saying you have to use cwm.
Sent from my Nexus S using xda app-developers app

I used twrp 2.3.3 to flash cm from clean.
Sent from my Transformer Pad TF300T using Tapatalk HD

[Q]My problem with stock and stock based ROM

Hi everyone,
When I use stock or stock based roms and I "Wipe cache and dalvik cache" ONCE then I keep getting Android is upgrading EVERYTIME I boot up. Does anyone know how to fix this or what kind of problem is this
Sent from my TF300T using Tapatalk HD

Me too have the same problem. I'm currently on CROMI 3.2. When i upgraded CROMI from 3.0.4 -> 3.1.1 problem has started. I havent't got any idea to fix the problem.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

Tamaskan said:
Hi everyone,
When I use stock or stock based roms and I "Wipe cache and dalvik cache" ONCE then I keep getting Android is upgrading EVERYTIME I boot up. Does anyone know how to fix this or what kind of problem is this
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
Isn't that the zip align feature which works on each boot?

tobdaryl said:
Isn't that the zip align feature which works on each boot?
Click to expand...
Click to collapse
Zip align feature? What is that?
Sent from my TF300T using Tapatalk HD

It is listed as one of the features of cleanrom to zip align on boot. I have read that when apps are zip aligned that performance is better.

tobdaryl said:
It is listed as one of the features of cleanrom to zip align on boot. I have read that when apps are zip aligned that performance is better.
Click to expand...
Click to collapse
But I use rooted stock lol so its not that feature xD
Sent from my TF300T using Tapatalk HD

Tamaskan said:
But I use rooted stock lol so its not that feature xD
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
I'm sorry if you haven't previously been on cleanrom or one of the others that uses zipalign then I don't know the reason for your issue.
I'll try to do some poking around to emulate the problem. Stock, which version? I run 10.4.2.18 as my baseline rom and have never seen your issue. What rom were you on previously?
I'll flash your previous setup and then your current to recreate the issue!

Odp: [Q]My problem with stock and stock based ROM
I have this same "issue" but it dont mind it. And i think its jb problem coz on xplay with jb (cm10+aokp) its "upgrading" too
Sent using tf300t - stock JellyBean (docked/nonrooted)

tobdaryl said:
I'm sorry if you haven't previously been on cleanrom or one of the others that uses zipalign then I don't know the reason for your issue.
I'll try to do some poking around to emulate the problem. Stock, which version? I run 10.4.2.18 as my baseline rom and have never seen your issue. What rom were you on previously?
I'll flash your previous setup and then your current to recreate the issue!
Click to expand...
Click to collapse
Well it started when I use energy ROM, but then I move to stock ROM .18 then .20. Both .18 and .20 when I wipe cache and dalvik cache once then it started...Maybe it's because I have official zip (.20) in my eternal memory... But I don't think that's the problem. Now I'm using CM10.1.
Sent from my TF300T using Tapatalk HD

Tamaskan said:
Well it started when I use energy ROM, but then I move to stock ROM .18 then .20. Both .18 and .20 when I wipe cache and dalvik cache once then it started...Maybe it's because I have official zip (.20) in my eternal memory... But I don't think that's the problem. Now I'm using CM10.1.
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
OK! Energy is stock 10.4.2.18 and zipaligned!
Are you having the issue on CM10.1?
I'm downloading Energy now so it will be a bit.

tobdaryl said:
OK! Energy is stock 10.4.2.18 and zipaligned!
Are you having the issue on CM10.1?
I'm downloading Energy now so it will be a bit.
Click to expand...
Click to collapse
Nope no issue on cm10.1 . thats why I use cm10.1 haha
Sent from my TF300T using Tapatalk HD

Tamaskan said:
Nope no issue on cm10.1 . thats why I use cm10.1 haha
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
Good, I'm glad you have managed to lose the problem. I have not been able to create the issue with energy rom. After flashing I don't have the problem or zipalign. I flashed both the regular and the debloated without an issue but as I said I don't find zipalign in the rom even though it is stated as a feature.

tobdaryl said:
Good, I'm glad you have managed to lose the problem. I have not been able to create the issue with energy rom. After flashing I don't have the problem or zipalign. I flashed both the regular and the debloated without an issue but as I said I don't find zipalign in the rom even though it is stated as a feature.
Click to expand...
Click to collapse
Hmm alright and thanks anyway.. But my problem is with those that is stock based ROM, even on rooted stock I got that.
Sent from my TF300T using Tapatalk HD

Why do you think it is an issue? It takes 3 sets to complete. It's just a bug, ignore it and worry about something more serious :victory:

[Q] Unable to install CM10.1

Hey guys, I'm having a problem with my tablet. When I try to install CM10.1 on my TF300T now, it won't boot. I've had it installed in the past, but for some reason it doesn't want to work now. Has there been some sort of change that would cause this? I can install CM10 on it, which I would have no problem using, but for some reason the AOSP Keyboard crashes every time I tap a text box, so I have no way of getting anything done. Any insight you could provide would be much appreciated.
Code:
Technical info:
Model Number: Transformer Pad TF300T
Android Version: 4.1.2
Kernel Version: 3.1.10-ga587c33
[email protected] #1
Tue Nov 13 07:41:52 PST 2012
CyanogenMod version: 10.0.0-tf300t
Build number: cm_tf300t-userdebug 4.1.2 JZ)54K eng..20121113.0473159 test-keys

did you wipe prior to install? also try fix permission in recovery.
good luck
cheers buster
Sent from my GT-I9505 using xda app-developers app

Buster99 said:
did you wipe prior to install? also try fix permission in recovery.
good luck
cheers buster
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I did full wipes left and right. It will sit there on the Asus screen for a while, and occasionally restart itself.

KeelanMachine said:
Yeah, I did full wipes left and right. It will sit there on the Asus screen for a while, and occasionally restart itself.
Click to expand...
Click to collapse
can you still boot into recovery or fastboot?
Sent from my GT-I9505 using xda app-developers app
---------- Post added at 12:08 AM ---------- Previous post was at 12:05 AM ----------
http://forum.xda-developers.com/showthread.php?t=2179759
if yes try to get back to stock and start from scratch. i put the howto into that threat.
Sent from my GT-I9505 using xda app-developers app

Buster99 said:
can you still boot into recovery or fastboot?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Yeah, no problems there. I have CWM touch installed, if that helps anything.

cm10.1 now only works on 4.2 bootloader...you should upgrade to the latest asus firmware and then flash the latest cm10.1

Kico. St said:
cm10.1 now only works on 4.2 bootloader...you should upgrade to the latest asus firmware and then flash the latest cm10.1
Click to expand...
Click to collapse
Is there a guide on how to do this? I would assume update from inside the stock Asus rom, but I don't know which version to install from their website.

KeelanMachine said:
Is there a guide on how to do this? I would assume update from inside the stock Asus rom, but I don't know which version to install from their website.
Click to expand...
Click to collapse
check my post in the thread i linked (post 12 there ) - even if it is for a total softbrick - you can follow those steps to flash the stockrom and then install cm10.1 or 10.2
i did it and alot of others did it too so it should work for you as well. it basically wipes your whole device so fastboot will work to push the blob. boot one time into stock and then install cwm/twrp and install from there cm from extsdcard
gl
-Buster

Buster99 said:
check my post in the thread i linked (post 12 there ) - even if it is for a total softbrick - you can follow those steps to flash the stockrom and then install cm10.1 or 10.2
i did it and alot of others did it too so it should work for you as well. it basically wipes your whole device so fastboot will work to push the blob. boot one time into stock and then install cwm/twrp and install from there cm from extsdcard
gl
-Buster
Click to expand...
Click to collapse
Can I use the 4.2 firmware from the Asus site?

KeelanMachine said:
Can I use the 4.2 firmware from the Asus site?
Click to expand...
Click to collapse
i did it a couple of days ago with most recent from the asus hp. i booted it once after flash then installed twrp- wiped and installed latest cm.
gl
-Buster