I have a 8gb motoactv ver 4.55.97, i have tried to root it with motoactv rool tool 1.1.6, with no luck, my fastboot is
3.12, and when i start , and try to flash boot.img, it just hangs on waiting for device. I have left it till, when i went back to reular , it was at 40%, so i don't think it takes too long, i have looked though the threads and seen nothing that anwsers my question. If anybody can hlp, or point me to a thread where it does, please do so. Thanks in advance -101007
I can't understand your question
101007 said:
I have a 8gb motoactv ver 4.55.97, i have tried to root it with motoactv rool tool 1.1.6, with no luck, my fastboot is
3.12, and when i start , and try to flash boot.img, it just hangs on waiting for device. I have left it till, when i went back to reular , it was at 40%, so i don't think it takes too long, i have looked though the threads and seen nothing that anwsers my question. If anybody can hlp, or point me to a thread where it does, please do so. Thanks in advance -101007
Click to expand...
Click to collapse
Sorry but what do you want to say?
SAY IN EASY WORDS!:cyclops:
Lol sorry, i did make some progress. I forgot to update and install motocast lol. When i run root tool , it works, but when it gets to the rooting part, it says error can't find device, for everything ( su, cwm ect), but it says after it installed them. But after i reboot, nothing has changed. I went back to stock , but im confused on how to hack it. One you use root tool, does the interface change, or do i have to flash a rom to do that? and how do i flash a rom? i haven't seen any guides that arn't near impossible to read. Thanks
Related
Hi All, Yes i am a noob and this is my first post. i have read all previous posts regarding this matter but havn't been able to find anything. I have managed to S-Off my phone (Hboot 1.17.1111) through revolutionary and put Cwm 4.1.0.4 on it but when i try to flasn su-2.3.6.3 Zip it says, finding, opening, then Can't open/sdcard/su-etc.zip (bad) Installation Aborted
I have tried downloading zip from different locations and latest ones but to no avail.
Any ideas Please.
My phone is Taiwan model dose this make any difference?
Cheers.
Try to flash it again.
I've had the same problem but after insisting a 2nd time, the flash was Ok.
Supertool V3 works wonders!
Hi, Thanks for your advice, i tried it 10 times and still nothing! I read lots of posts on other forums etc people having same prob but no one seems to know what the prob is. Anyways i found this Supertool V3 program you run on your computer plug in your phone and prees a enter and it does it all for you the whole kit and kaboodle and it worked first time.
Yay, i am now rooted.
Cheers,
10 times
I didn't know this tool so I couldn't advise you to use it....But if that's good now, excellent for you !!!
Why not use the latest version of Superuser as opposed to that ancient build...
http://goo-inside.me/superuser/Superuser-3.0.7-efghi-signed.zip
First off, do this.
Second, the problem you're having is likely because the su.zip file you're trying to flash is bad. Just because you downloaded it doesn't mean you got a clean copy. Files get corrupted during the download process or in the transfer to your SD card.
CWM is basically saying "Look dude, this file isn't going to do what you think its' going to do so I'm not going to install it and eff up your phone. You're welcome!"
So again, get the newer version of SU linked above. And if you have this problem again with SU or anything in the future, the first thing to do is get a fresh copy of the file and start over.
I tried both methods above but my GT-P1000 reboots to cwm recovery. Tried wiping data etc.
Can anyone help please?
This is the HTC Sensation forum, go to your devices forum and ask there
I was working fine, enjoying my new HTC One S with CM9 rom installed. Well the battery life wasnt the best on it, and i didnt install the custom kernel. So I looked for the custom kernel download(on my phone, not on my computer) and i found a .zip file. Well I thought that you could just download the kernel straight to my phone and open it up with "Rom Manager" which i did, it than said i needed to reboot the phone in recovery to continue the installation, so I did... it took me to recovery "to continue the installation" well than I looked away, looked backed down and it was black.... and i have tried powering up, booting into boot loader, booting into recover, and nothing... its just BLACK! nothing works, its literally useless ATM. I really messed up, is there anyway to fix this? Thanks in advanced!
----EDIT----
I think I accidentally flashed the kernel like i would normally flash a rom.... cause i downloaded the .zip file(directly to my phone, not using a computer), than i tapped the download and it asked me if i wanted to open it up with rom manager, so i did. and i think rom manager thought i was flashing a rom, when i wasnt, it was a kernel.... am i screwed? or is there anyway out of this?
Do you know the exact kernel you flashed--where did it come from
Some you need to extract and push
Assume you just tried to boot into bootloader thru phone buttons
Does your pc recognize your phone when plugged in, if so can you open a command window and try to access phone as in adb devices then adb reboot bootloader
assuming you are familiar with sdk adb/fastboot comands
otherwise i don't know what else to say--may be bad--sorry
Came from an XDA thread
Here is where it came from: http://forum.xda-developers.com/showthread.php?t=1708676 from "sun90" (half way down the page "CM9 KERNEL remix edition.zip - [Click for QR Code] (5.53 MB, 9 views) ")
i downloaded that straight to my phone and opened it up with Rom Manager, which i think the app took it as a rom, and installed it like a rom even though it was not a rom. I just tried to access it through adb, it comes up with no devices my PC does recognize it when i plug it in though...
Ive tried to get into bootloader tons of times, it just stays black... :'(
Thanks for your answer!
You flashed a galaxy s2 kernel on your one s? why would you ever think that was a smart thing to do?
Looking at the updater script in that zip it seems it wipes some partitions, the partitions on a SGS2 and the ONE S are different, so if that script accidentally wiped say the hboot partition, or some other critical-for-boot partition, you have a fully bricked phone.
For any devs that may know what partitions are what on the One S, the script wiped
mmcblk0p7, and wrote a zimage to mmcblk0p5
---EDIT---
Normally this is a cwm flashable zip on the Samsung Galaxy S II, which is why rom manager flashed it, as it met all the requirements, the only issue is, it was not made for the ONE S and probably overwrote some important things.
I tried for hours and hours to fix the same issue on a friend's One S (same symptoms, not same cause) to no avail. I tried QPST and telnet and a ridiculous amount of things. Had to bring it to the store and get a new one.
Good luck, but I don't believe there's anything you can do to fix it.
Just answered your question in the help thread, Didnt see this thread too !
Im afraid its not looking good, I think your best bet would be to call your provider and blame it on an OTA update.
And hope for the best
Alright, thanks for the help!
Well it looks like i bricked my phone than.... I thought that CM9 was only on the One S, so I just looked for the CM9 kernel, which obviously was for the sg2, i feel like such a dumb ass now! haha well thanks for all the help guys! ill be heading to the t-mobile store today to blame it on a OTA:]
yeah, others wont agree with what your about to do but........
just act like a complete noob, dont mention anything about software / firmware / ROMs / bootloader etc ect
just say your phone made a noise, you selected update and it died lol
good luck--I know it is heartbreaking
not sure of your situation with carrier, but you could go thru Retention if needed
Hi peeps.
i'm very new to all this but sort of know the basics
i'm running on Axiom now but tried to flash cm10 but after install i got a black screen so had to do a restore.
Today i just flashed venom and after the instal process is done, i hear the start up music but nothing on the screen.
I have had 3 other roms on my phone and never had a problem!
these are the steps i do
download rom - place on sd
put phone in recovery
reset factory
reset cache
install from sd
when it finish's reboot
blank screen.
Am i missing something?
Any help would be great and i can't post on the thread because i'm a noob with less than 10 and dont want to spam my way to the 10 :silly:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
rugmankc said:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
Click to expand...
Click to collapse
Thanks but i think that is now the least of my problems!
I used Goomanager and installed CM10, When I did it i installed teamwin recovery. It started to do a lot of strange things, when it finally rebooted i got a load of errors "phone is not working" nearly every 10 seconds?
it will not connect via usb, i discovered the the SD was not mounted.
I tried to mount the SD but it doesnt work, so i rebooted to recovery and tried to mount there but its coming up with - error unable to mount? ive tried everything but no joy
please please help
Thanks:crying:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
rugmankc said:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
Click to expand...
Click to collapse
I've got a mac
not sure what fastboot is.
I'll check out the link, and thank you very much for trying to help:good:
sorry i do know what fastboot is, yes can get in to it. but ive gone from CWM to teamwin recovery if i go in to the recovery section but that wont let me do anything because the mount. cant even load the phone up
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
rugmankc said:
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
Click to expand...
Click to collapse
im going to use someone elses alp top with windows. i'll ytry the all in one thing because thats how i rooted it in the first place. thanks for helping it means alot
good luck on it
Hello, I have a Motorola Defy which i have rooted and installed clockworkmod on it. I tried to install Cyanogen mod 7.1 from the website. The phone got to the boot screen where it continued to cycle through it thing and nothing more. I restarted the phone and now it gets stuck at the first screen where its says "google". I tried to enter recovery again (power + volume down) and clockworkmod is completely gone. I want to go back to the stock OS so it atleast works again. Ive tried using the update.zip option in the stock recovery mode but I keep getting an error "failed to verify whole-file signature" when using a signed copy of cyanogen mod. I also tried putting my backup in a zip with the same error. Ive even tried formatting my sd card. What do i do?
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a different way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Marvelicious75 said:
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a dirrerent way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Click to expand...
Click to collapse
I cant use the program as my phone doesnt get detected when connected to my pc.
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Marvelicious75 said:
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Click to expand...
Click to collapse
I fixed it, there were a different set of buttons to hold to get into boot loader. The default recovery was not over written as i thought (happened to all my other phones). Thank you very much for you help. It has been very much appreciated.
Glad to hear it.
Hey guys, here is my problem...
I had rooted my note using Zedomax's guide, and installed custom bootloader n all...
First time I tried to do OTA update, it just said 'bad file' < something along that line, tried it again and same.
Then I flashed a different bootloader I found here on the forums <sorry I cant seem to recall the link> and still, the process stops at 24% time and time.
I've tried this for about 6-7 times till now, always fails.
Still stuck in stock 4.0.4, can anyone help me?
Thanks in advance.
DeeChan said:
Hey guys, here is my problem...
I had rooted my note using Zedomax's guide, and installed custom bootloader n all...
First time I tried to do OTA update, it just said 'bad file' < something along that line, tried it again and same.
OTA fails on rooted phones .
Then I flashed a different bootloader I found here on the forums <sorry I cant seem to recall the link> and still, the process stops at 24% time and time.
I've tried this for about 6-7 times till now, always fails.
#
F*** knows why anyone would flash a bootloader .
Read the faqs and guides before playing with firmware .
Try
http://forum.xda-developers.com/showthread.php?t=1978840
Essential return to stock is factory reset flash upgrade firmware via KIES or stock firmware via Odin .
jje
Click to expand...
Click to collapse
Thank you soo very much!
JJEgan said:
F*** knows why anyone would flash a bootloader .
jje
Click to expand...
Click to collapse
Cos people try anything when they have no idea... Instead of reading just a little to find out they will blindly throw themselves off cliffs because the instructions say so....
ultramag69 said:
Cos people try anything when they have no idea... Instead of reading just a little to find out they will blindly throw themselves off cliffs because the instructions say so....
Click to expand...
Click to collapse
Yea, I was just asking for help there, not your personal opinion. Thanks anyways!
Come on guys, why so serious?
everyone make mistakes, im 100% sure even people who read everything possible would make mistakes at first. thats how people learn.
If u cant help in a friendly manner, then dont help at all, there is some others here who would help.
@DeeChan
anyway, glad that you got ur problem solved.
I've been using Gnabo v_7 version for quite a long time, and a very simple and beautiful day when I woke up my Samsung GT-N8000 was stuck on bootscreen. I wasn't able to do much so I got this "Brazil stock rom" that I found in a website, and it flashed all right, except for the detail that there is something at the screen that I haven't got a bloody clue how to remove. hahaha
And still, whenever I try to install another room, I got stuck at bootlogo and so on. I'm kinda lost here, mind a little help?
I traveled around the forum but well, I'm a little dumb so I couldn't find any proper information about, how to solve this. I would like to know if there is a way to remove this thing from the main screen, and post here the image for you guys to see it please.
I tried to post the image here to make it easier understanding, but since I got this login recently I can't =\
Thanks
Install custom recovery (if you haven't already. If you already have it installed, make sure to update to latest version), root device, wipe everything and flash custom ROM.
DroidTwe4kz said:
Install custom recovery (if you haven't already. If you already have it installed, make sure to update to latest version), root device, wipe everything and flash custom ROM.
Click to expand...
Click to collapse
So far I've tried the rom = N8000XXUDNE4 [still bootloop], then another 4.1 android version of other German rom XXALGA and nothing. Downloaded 3 Brazilian versions, and nothing. [I am from Brazil]. The only one that worked flashing using Odin was one called "KIES_HOME_N8000UBALGA_N8000ZTOALG3_N8000UBLG5.tar". And still, not recognizing my cellphone chip, and with some big watermark at the middle of the screen showing some information about the ROM and the version is 4.0. Even though this one worked fine, I was able to root and when I tried to flash another room, BANG! Bootloop again! =\
I was looking at the forum topics and I read some about ADB or something like that can fix this and "break" this bootloop making the device work normally again with the roms. But i haven't got a clue how to use it. Please help me! =\
vitortakeda said:
So far I've tried the rom = N8000XXUDNE4 [still bootloop], then another 4.1 android version of other German rom XXALGA and nothing. Downloaded 3 Brazilian versions, and nothing. [I am from Brazil]. The only one that worked flashing using Odin was one called "KIES_HOME_N8000UBALGA_N8000ZTOALG3_N8000UBLG5.tar". And still, not recognizing my cellphone chip, and with some big watermark at the middle of the screen showing some information about the ROM and the version is 4.0. Even though this one worked fine, I was able to root and when I tried to flash another room, BANG! Bootloop again! =\
I was looking at the forum topics and I read some about ADB or something like that can fix this and "break" this bootloop making the device work normally again with the roms. But i haven't got a clue how to use it. Please help me! =\
Click to expand...
Click to collapse
You can use ADB to push/pull files to Android. I don't know if you can use it to fix bootloop. With it, you can also reboot to recovery and sideload zip
DroidTwe4kz said:
You can use ADB to push/pull files to Android. I don't know if you can use it to fix bootloop. With it, you can also reboot to recovery and sideload zip
Click to expand...
Click to collapse
Well, after 2 days of research and paying attention on things here, I found out that my problem is "/EFS error". Meaning to use ADB to recover or fix it? But I don't know how to use this. I've downloaded 3GB of it but I was lost about using, and uninstalled. Is is there any short or better version and some good tutorial about using to retrieve my EFS so I can install another roms? I'm using original stock rom now, Brazilian android 4.0 and that's the only only the device is working fine but of course missing things as my cellphone card and the yellow message at the top of the screen. Please guide me through ADB.
P.s Is there a way to create /efs or something like so the device work properly? Cause I've deleted when I installed some rom, and I have no backup here. =\
Thanks!
vitortakeda said:
Well, after 2 days of research and paying attention on things here, I found out that my problem is "/EFS error". Meaning to use ADB to recover or fix it? But I don't know how to use this. I've downloaded 3GB of it but I was lost about using, and uninstalled. Is is there any short or better version and some good tutorial about using to retrieve my EFS so I can install another roms? I'm using original stock rom now, Brazilian android 4.0 and that's the only only the device is working fine but of course missing things as my cellphone card and the yellow message at the top of the screen. Please guide me through ADB.
P.s Is there a way to create /efs or something like so the device work properly? Cause I've deleted when I installed some rom, and I have no backup here. =\
Thanks!
Click to expand...
Click to collapse
Here is tutorial about how to install ADB and Fastboot drivers and use them. Unfortunately, I don't know how to use it to restore efs. Sorry.