Related
This is easier than making a cup of coffee.
Pictures below as attachment couldnt figure how to put the pic here edit figured it out now im just lazy.
you dont have to do it the hard way
Everyone (edit: i thought so at the time)will want this "Fully" (note below) funtioning Ubuntu system
or you can make your own here: http://forum.xda-developers.com/showthread.php?t=913622
I will be maintaning and updating as time permits
Phone has to be rooted: http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/Guides_&_Tutorials
NEW IMAGE 3.5 gigibyte
Lucid base image (only added: lxde and tightvncserver): Zip http://www.megaupload.com/?d=GLMYVCMN User: "dad" Passwd:ffffffff
Remove app2sd and settings- applications- manage applications- sdcard "move all apps to phone" or it will not work!
I suggest you install gnome-panel
I use it and i find no speed differance!
trying to get :upstart services" to work im looking into compiling a kernel with "CONFIG_TMPFS enabled, to initiate a workaround, because "upstart" services wont work in a chroot.
Stock Maverick : http://www.megaupload.com/?d=56AT71WD
Karmic Sucks programs stop opening after some short time, so i gave up.
Tested with: CM7 http://mirror.teamdouche.net/get/supersonic/update-cm-7.0.0-RC1-Supersonic-signed.zip
CM6: http://mirror.teamdouche.net/get/supersonic/update-cm-6.1.2-Supersonic-signed.zip
myn-WarmTwoPointTwo-11-05-2010-RLS-3
Unzip
Copy the "ubuntu" folder to your sd card
Go to market download "Terminal" and android VNC Viewer
Open terminal and type: (without the quotes), "su" then "cd /sdcard/ubuntu"
then "sh ./ubuntu.sh"
then "bootubuntu"
then "vncserver :0 -geometry 1024x800"
Thats it, go to android VNC Viewer and use dad for nickname, "ffffffff" for the password, "localhost", for address, 5900 for the port, Use 24bit veiwing settings, then go.
to shutdown you will have to power off phone and power back on.
Enter in your :"Initial Command",in the settings of Android Terminal:
su
cd /sdcard/ubuntu
sh ./ubuntu.sh
bootubuntu
So everytime you want to start ubuntu just open terminal
to start VNC SERVER automaticly you will have to add to the bottom of your /home/.bashrc file this:
cd /
rm -r -f /tmp
mkdir /tmp
vncserver :0 -geometry 1024x800
Thats it, your off ENJOY
Notes: Its as fully funtioning for myself, cant speak for everyone
This is in Beta stages I am an old Visual Basic dabbler as a hobby, and am not very fluent in the lenux operating system. However this "ubuntu on mobile device" has rekindled a lost desire to program.
I will update changes as i get the time
If anyone would like to contribute their lenux expertese to iron out the bugs, i and so many others would appreciate it
Issues to work on:
:no sound
NOTE: A big kernel level problem is the lack of sound. Most of the kernels we use as a base for our ports are designed for Google Android. Android doesn't use the standard Linux sound System ALSA. An ALSA wrapper for the EVO DSP kernel system must be written.
:Setting up users and groups (used kusers but seemed to slow system a bit, needs kde-common) But is very tolorable, I actually use dolphin. (cant get nautilus to create folders or files (destination read only? u got me)).
:hacked /root/.bashrc for easy login help (when using terminal runs .bashrc. dont know anotherway to start hamachi on login and also vncserver tries to restart)
:keyboard mapping (mapping arrow keys to the abc keyboard it has arrow keys, esc,etc...)
: No way to exit or turn off ubuntu. You have to turn off phone, to turn off ubuntu.
nce in a while the programs refuse to open, it has somthing to do with ?. you have to restart ubuntu again.
I suppose a fluent ubuntu/lenux person could help change usernames and such, using the terminal,set proper permissions and such
Im using CyanogenMod Rom its the only one that works with Hamachi
your rom will most likely work, however networking wont!
Tips:
ownload VNC for your computer and modify your ubuntu desktop on your computer screen (that way i dont need my glasses) (use "ifconfig" to find ip address)
:You can even use VNC to view the build while in qemu emulation, after installing lxde and tightvncserver in the emulation. (watch out for seg faults)
:In terminal, preferances-initial command, enter the "cd /sdcard/ubuntu ...etc ," that way its a one click to login .
:Get "abc keyboard" from market it has the esc, arrow keys etc... ( extra keys only good outside chroot, the "terminal", on your android desktop)
:If your not familiar with ubuntu, you use synaptic package manager to install programs
:When u share over himachi or start smbd, programs will stop opening.
.
Trust me everything i want it use it for seems to be pretty zippy, but just give a little xtra time for programs to load the first time. (Firefox may take 90 sec. to load the first time. After that its a snap)
I Would like to check into this
The no sound issue is getting to me, I may wait for that as that is an essential to my all in one device.
THANKS FOR THE HARD WORK. I LOVE UBUNTU
you really have to try it and tell everyone about it cant believe its not one of the hottest topics
I Would like to check into this
any way to delete this post....didn't mean to submit, came back to send like i didn't send it but ending up sending twice
apologies
Sounds pretty cool, I will defiantly have to give this a try. Question though, is this installing over top of the rom I am currently using. Example I am using the MIUI 1.22, if I install this is this like dual booting or will it just uninstall every time I reboot the phone??
Is it still uploading? I really want to try this!
corybucher said:
Sounds pretty cool, I will defiantly have to give this a try. Question though, is this installing over top of the rom I am currently using. Example I am using the MIUI 1.22, if I install this is this like dual booting or will it just uninstall every time I reboot the phone??
Click to expand...
Click to collapse
This will sit on your sdcard and ride side by side with your android system (you can use your phone at the same time)
IT DOES NOT EFFECT YOUR PHONE IN ANY WAY
wasnt shouting just wanted everyone to see
ioos said:
Is it still uploading? I really want to try this!
Click to expand...
Click to collapse
Download away!
This is awesome! I can't wait to get home and give it a try.
This is gonna be a great weekend. Between this and the flashable ROMs that are starting to roll out for my nook color, I might be sprouting antennae by Monday.
So wep cracking soon...? That's about the only thing I want/need Linux for.
Sent from the void...
wuclan48 said:
So wep cracking soon...? That's about the only thing I want/need Linux for.
Sent from the void...
Click to expand...
Click to collapse
How would one go about this "wep cracking thing"
please explain further
Almost* all WEP and some** WPA wireless passwords can be cracked. IMHO its easiest to do this on a Linux machine (please take note I love all OSs equally!)
*I forget how accurate this is but some WEP keys(like crazy long ones) can cause problems l in cracking, thus being protected (though not by design)
**most wpa specifications are not crackable yet and those that are often have a very stringent set of requirements (off the top of my head: most require someone to be legitimately connected to the access point and very simple passwords with low encryption.
On topic, though, this is sweet. Hope I can get something like this on my galaxy tab too!
EDIT: If you really need to know this (please only for testing... not to mooch people's internet) Google "wep cracking on backtrack"
The short simple answer is you sniff packets that the wireless access points send out and manipulate them to decrypt the key.
EDIT 2: I just realized you are also the guy who made this. Let me answer a few questions.
1) For audio you probably need to find a way to register the hardware with a Linux Audio Mixer. I'm guessing Ubuntu uses ALSA? I'd have to look that up
2) For users, kusers is part of the KDE desktop system. Ubuntu uses GNOME. People generally only use one or the other (unless they're trying to show off). That's probably why it either a) won't work or b) not work well and take up lots of extra space
3) It's Linux, not Lenux (but that's fine I can sense English isn't your first language... it's not mine either, but that's fine ^^)
the download has a "zipx" extension.
I did a little googling and it looks like that is winzips new default compression method, and the only way to open the archive is with winzip, bitzipper, pkzip, or a couple of others. none of the compression utilities I typically use (7zip on Windows, unarchiver on mac) seem to support it.
Edit: sorry if I sound unappreciative, I just think its funny to use a proprietary closed format for distribution of software that is all about open software and formats. I'm currently trying to find something that will open this on the mac without being a scummy trial, or ill just do it on a pc.
Sorry i just used the wizard and made a zip file with winzip 12.1
Quote"Almost* all WEP and some** WPA wireless passwords can be cracked. IMHO its easiest to do this on a Linux machine (please take note I love all OSs equally!)
*I forget how accurate this is but some WEP keys(like crazy long ones) can cause problems l in cracking, thus being protected (though not by design)"
Thanks for the info
laydros said:
the download has a "zipx" extension.
I did a little googling and it looks like that is winzips new default compression method, and the only way to open the archive is with winzip, bitzipper, pkzip, or a couple of others. none of the compression utilities I typically use (7zip on Windows, unarchiver on mac) seem to support it.
Edit: sorry if I sound unappreciative, I just think its funny to use a proprietary closed format for distribution of software that is all about open software and formats. I'm currently trying to find something that will open this on the mac without being a scummy trial, or ill just do it on a pc.
Click to expand...
Click to collapse
shame on me .
Your right im a noob and really know too much about it yet i just like having ubuntu on my phone.
Ill do better next time
People talking about cracking WEP and stuff, this probably doesn't have a driver to put the wireless card to put the card in monitor mode.
laydros said:
the download has a "zipx" extension.
I did a little googling and it looks like that is winzips new default compression method, and the only way to open the archive is with winzip, bitzipper, pkzip, or a couple of others. none of the compression utilities I typically use (7zip on Windows, unarchiver on mac) seem to support it.
Edit: sorry if I sound unappreciative, I just think its funny to use a proprietary closed format for distribution of software that is all about open software and formats. I'm currently trying to find something that will open this on the mac without being a scummy trial, or ill just do it on a pc.
Click to expand...
Click to collapse
Have the same problems, did you happen to find anything to open it with? I searched a little on google myself but all I find is software that needs to be purchased.
Homefix said:
Quote"Almost* all WEP and some** WPA wireless passwords can be cracked. IMHO its easiest to do this on a Linux machine (please take note I love all OSs equally!)
*I forget how accurate this is but some WEP keys(like crazy long ones) can cause problems l in cracking, thus being protected (though not by design)"
Thanks for the info
Click to expand...
Click to collapse
AFAIK, WEP can be easily cracked. WPA or WPA2 though, will require bruteforcing, there is no way around it.
corybucher said:
Have the same problems, did you happen to find anything to open it with? I searched a little on google myself but all I find is software that needs to be purchased.
Click to expand...
Click to collapse
I will repackage it, but it might take 3-4 hrs to upload, sorry.
ill get right on it
https://market.android.com/details?id=com.galoula.LinuxInstall
New every thing. Redesign of everything every where, rewite of all English parts, many bug fixes.
What for ? install Debian using debootstrap in chroot, and use your Android device like if you had installed Linux on a standard computer.
Bugs shall be reported to [email protected] .
Misc questions about how to use and feature request and general discussions to [email protected]
Market description:
This application will allow you to install a complete Debian distribution in your Android device. Based on chroot, it will perform a standard debootstrap and install a legacy Debian so that you can install, and run any classic Linux command, tool, daemon or service.
The package has few limitations; it is not restricted to Debian; we already offer the choice to use Ubuntu, and will add more distributions in close future. Each distribution is available in several tastes (stable, testing ...). It will not require to reboot; chroot is run inside Android. Installation can be done on any storage device, either on SD card, or inernal memory; no need to repartition any thing, run mkfs or fdisk. We do with what you let use. If you have almost nothing, the package will manage with almost nothing; if you can afford for a large ext4 partition on your SD card, the package will be happy to use it.
It will allow you to install all classic LAMP services like Apache, MySql, PHP, Samba, Netatalk, or just any classic Linux tool like vim, xterm, aterm, Abiword, Firefox, dillo, wget, cron, Perl, Python ... just everything.
Package utilisation will require a rooted device.
Reasons to install this package can not be listed. Just too many: want a cron daemon ? want to have gcc inside your phone ? want to recompile some kernel driver because the legacy Android driver for your Wi-Fi card has is bogus or limited ? want to use vim, or the real full featured desktop ls, ip, nmap, or top commands ? this package will give you all this for free, and much much more.
Requierments:
- an Android device based on some Linux kernel
- a rooted environment
- 300M free space
That's all.
Optionnal registration on our website, http://android.galoula.com/LinuxInstall/Register.php , will allow you to use advanced management features, and install package from within the application interface. You will not need to type any strange command in any terminal. And you will be able to make some services start automaticly at phone boot, and/or application start.
Online documentation: http://android.galoula.com/en/LinuxInstall/
Quick installation guide: http://android.galoula.com/en/LinuxInstall/QuickTutorial.html
Click to expand...
Click to collapse
Free space must be on sd-card or phone memory?
Both accepted You choose where to install.
500M by default on SD card using loop method (on ext2 or fat). Down to 180M using the directory method (does not work on FAT).
thanks for this man.
Sorry if this is a noob question but will this in any way brick/soft brick my device?
Sent from my GT540RR using XDA App
Yes, it can.
But this app is underdevelopment since almost two years, and nobody ever bricked yet. I have written a very long complete tutorial, where I say what you should NOT do. I could easily tell you how to brick in 5 steps.
But we have been working very hard on default settings, to make default settings as much safe as possible.
There are many bugs, many known bugs; but 99.999% bugs will just make the chroot not work. Data loss is very rare. Data loss was highly probable in previous version 3.2 . But default settings are now safer. And if you do not do what we claim to be dangerous ... you are safe.
The most frequent case with 3.2 was complete wipe of /sdcard and /data . This have been fixed.
We never ran into wipe of /system until now. Never bricked.
And since Galoula and me are working on it, we are the most exposed ones. We test every single feature, in all possible situations. And when we find a wipe case, we repro it dozen time until we understand why, and how to fix, so that it won't happen to YOU.
3.3 is way safer than 3.2. And nobody reported wipe on 3.2 ...
But if you blindely clik any where, yes it can. And if I tell you where to click, you can brick in 5 steps for sure And it won't be a soft brick. I promise a good real brick where even HTC will be in trouble to repair it It's explained in the tutorial.
Wow. Thanks for the reply. At least i have an idea now. Is the tut on the app itself? I'll nake sure to read it very carefully coz i wanna learn all about this stuff
Sent from my GT540RR using XDA App
A not so short tuto is inside; but since most mobile devices have only one screen, you may want to read the online tuto on your computer: http://android.galoula.com/en/LinuxInstall/
Default settings are safe. Just follow the guide.
Will go ahead and read this tut. I'll make sure to give feedback. Thanks for paying attention to this noob
Sent from my GT540RR using XDA App
this is just great, are there any videos or screen shots?
edit: nevermind i just checked the market
Feel free to send us screen shots; I am not good at doing that (i can to shots, but I don't know what could be nice to upload).
We would apreciate shots of working (of course ) VNC clients connected to server running localy, or local consoles (like Connectbot) doing funny things.
Send to support. Thanks.
Spent the whole weekend on this...
I'm trying o get an X- GUI on the Samsung Captivate, (hope i said that right) like Ubuntu so i can VNC to a linux desktop environment. I'm on FASTY and wondering why I keep running into refusal of connection. I have the password and localhost as well as the port correct. I've lost sleep on making this work. Can anyone help...?
You question is somehow off topic.
You seem to have a basic VNC connexion issue.
Could not help without deeper description. And I rarely use VNC, i have very low experience.
First point: do you have free space in the distro ? depending on installation method, and what you installed, you may have run out of disk space (especially Ubuntu, uses lot more than Legacy Debian).
The distribution manager is still beta AOT. It may report the VNC service to be up and running, when it could not rally run. First thing to check is: is it up ?
- from local machine, to ps, and check if process is up
- from remote machine, just scan your IP for the device. VNC should be port 5800 or 5900, forgot which one.
Your VNC password is *NOT* your distribution password. VNC password need to be set at a different place (this is VNC specific; VNC is not UNIX, and never claimed to be fully a *UNIX "merged" service*).
Never used VNC in LinuxInstaller. Never yet. Not enough time to test it. We take report, and will test only major and frequent issues. We have many "easy success" reports, so, we don't worry about it. We have much more issues about rooting (getting root on phone), and starting debootstrap; this is what we focus on.
Make sure you have enough free space (at least 50M free left), then join any Debian or Ubuntu forum. They will ask you if you have a CLI; you shall use either adb shell, or connectbot. Fact you are in a chroot is not an issue, chrooting is not frequent for debian users, chrooting is the normal procedure to install Gentoo; and all debootstrap users use chroot daily; forums should not reject you for this reason. As long as you have a CLI.
Good luck.
Lost me fast...
Sorry..but you lost me, and FAST! I really don't have the terminology down...but I do have the Linux 3.3 Installer running properly...it indicates so. I was assuming that this would allow me to somehow load Ubuntu on my Captivate..as I've seen on some screen shots...I guess I'm just lost...a little knowledge is dangerous...I have a little. Just enough to accomplish the basics..but the vernacular is LOST to me. Guess I'll have to wait for the Ubuntu apk...thanks for trying...
I've got this errors...(see attached files).
I have busybox 1.19, connectbot and the superuser (v2.3.6.3 and su binary v2.3.2, the latest from the maket)...
What can I do?
you guys are still lucky.your able to make it work...
im running the ongoing cm7 2.3.5 on moto defy...
kernel is not supporting this yet.
hailmary what's missing in your kernel ? I don't know any Android that won't have ext2 in; if you have an Android without any ext2 filesystem, please contact me in private, I know it could be done, and I would be VERY CURIOUS to see how HTC did it.
If you are missing loop support in kernel, try block or directory method. Blocck will require ext2; directory won't (but will work only over ext FS ... so ... unless you can use NFS )
dugryce , ScumpinatoS, I will come back later (maybe today, maybe not).
ScumpinatoS said:
I've got this errors...(see attached files).
I have busybox 1.19, connectbot and the superuser (v2.3.6.3 and su binary v2.3.2, the latest from the maket)...
What can I do?
Click to expand...
Click to collapse
Reading the first message, you as, as said, a CPU issue. What's your CPU ? device model ?
run in some console:
uname -a
which tail
Application could not load viable environment to work; it is an issue, but it can be fixed. I can help digging, but I won't give you any solution. Send an email to Galoula; the bug report system via the console should work for you.
doublehp said:
Reading the first message, you as, as said, a CPU issue. What's your CPU ? device model ?
run in some console:
uname -a
which tail
Application could not load viable environment to work; it is an issue, but it can be fixed. I can help digging, but I won't give you any solution. Send an email to Galoula; the bug report system via the console should work for you.
Click to expand...
Click to collapse
I have a Huawei Ideos CPU: MSM7225 without GPU.
I am use it and try install Ubuntu Natty but after download all deb package i get error installation, "issue binary, try other version"
Can someone help me what distro (Ubuntu/Debian) and what version of it that have installed succesfully.. please...
Sent from my GT-S5570 using XDA App
alright maybe im going at this the wrong way i want to be a dev... well i try and get acidify well im getting all kinda errors when i do the command acidify infi cm9
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
warning: https unexpectedly said: '0000'
error: '/home/lee/.repo/projects/external/bluetooth/bluez.git/clone.bundle' does not look like a v2 bundle file
fatal: Could not read bundle '/home/lee/.repo/projects/external/bluetooth/bluez.git/clone.bundle'.
what does this mean i wanna learn about this stuff but keep getting these errors
Likely a server timeout or other glitch. "repo sync" until you don't have any more errors. The first time sync is painful.
Posted from my AOKP-ified SGS4G
It went on for about three hours and kept on doing the same thing anything I can do
Sent from my superchager SGH-T959V using xda app-developers app
Delete the damaged file and restart the sync. Hopefully it will finish. Expect a full sync to take 5-20 tries, and if you ever abort due to being bored or just having a lousy network connection... your fun may increase exponentially.
Question of my own... on both Windows with Cygwin as well as on Ubuntu with all the 'standard' requested packages, I get this error when trying to run Acidify 0.4.0:
# ./acidify
./acidify: line 8: color: command not found
Click to expand...
Click to collapse
Am I just missing some incredibly obvious package? I've compiled kernels manually, but Acidify sounds like it should make things a ton easier. Thanks.
Color should be a built in function of the script. I hope max sees this post since I can't look into it right now
Ahh... the function color is included, lines 196-222... but it's first used on line 8, as well as 61. THEN it gets defined.
Unless it gets put into bashrc like in this AskUbuntu example, I think it needs to be defined before it gets used.
Theraze said:
Ahh... the function color is included, lines 196-222... but it's first used on line 8, as well as 61. THEN it gets defined.
Unless it gets put into bashrc like in this AskUbuntu example, I think it needs to be defined before it gets used.
Click to expand...
Click to collapse
Maybe post a bug report on github? m4xm4n has been busy with school. This will insure he sees it.
Moved the color() function from 196-222 to line 5. Acidify now runs... well, it gives me a new error. With yellow text!
# ./acidify
Warning: Could not load configuration file. Using environmental or program defaults.
./acidify: line 170: conditional binary operator expected
Click to expand...
Click to collapse
which happens to be the same error I got when manually stripping out the color calls before. That line is:
Code:
[[ -v DISTRIB_ID ]] || DISTRIB_ID="Your system"
I'll try to make a bug report with a note that moving color function fixes my initial glitch.
I'd checkout (as in "git checkout") the previous version if you are continuing to have problems.
Sounds good. Though turning that line into
Code:
DISTRIB_ID="Your system"
made it run on my Cygwin box. Looks like that line is supposed to tell you which specific *nix version isn't supported if it fails, and for some reason on both my Cygwin system and Ubuntu systems, the fail-check fails. However, that appears to have been in the prior versions of Acidify as well, so they appear less likely to be a logical fail-point. Will try it with the checkout though on the Ubuntu.
Edit: And... Cygwin is 32-bit only. Awesome. So it's not going to be running Acidify for me. Ubuntu box is currently processing something else, so I'll check it whenever it decides to move along.
But git checkout left me with the same color error, if that's what was supposed to fix it.
Edit2: Ubuntu box didn't fail on the same spot, so it looks like I'm good... Well, unless it doesn't actually run, but it gets me to the info screen at least. I'll update if it has problems, but it looks like the only other 'issue' I found was Cygwin-only which doesn't really matter for us since it can't run Acidify anyways (being 32-bit). Should I still note it as an issue on Github, or do we not care since it's only an error where it can't possibly work anyways?
Edit3: Okay... One sudo mkdir /.acidify and a sudo mkdir /.repo later and it's actually pulling files down...
reclamer said:
error: '/home/lee/.repo/projects/external/bluetooth/bluez.git/clone.bundle' does not look like a v2 bundle file
fatal: Could not read bundle '/home/lee/.repo/projects/external/bluetooth/bluez.git/clone.bundle'.
Click to expand...
Click to collapse
Poking around in repo to resolve a problem that I have with AOKP right now, I found, from repo help sync
Code:
The --no-clone-bundle option disables any attempt to use
$URL/clone.bundle to bootstrap a new Git repository from a resumeable
bundle file on a content delivery network. This may be necessary if
there are problems with the local Python HTTP client or proxy
configuration, but the Git binary works.
A little note... apparently the error I mentioned comes up anytime you're using a distrib that doesn't show up in the search. Since in addition to Cygwin, that error also comes up when trying to use Acidify with Ubuntu 10.10. Guessing that means that the || bit isn't functioning properly... maybe it needs to be inside the [[]] or something? Guess I should report that as another issue on the tracker.
Hello World!!
Lost the connectivity when syncing a repo source and had to redownload the entire source again?
Not needed anymore!
Well, many of the developers face this problem!
I am here to provide a solution which I found out myself in my experience that you can actually pause the syncing for a while and continue working on it later.
You can also correct the errors that occured during syncing!!
So now lets get our hands dirty. Its a very simple trick.
If you want to pause the repo sync for a while and resume it later time of the day, press "CTRL + Z" and to resume the sync, type "fg" and press enter.
If you want to switch off computer and do the sync tomorrow,
Press "CTRL + Z" and Switch off computer. Then tomorrow or the day you start working, open terminal and change directories to that place where you started syncing and type "repo sync". You need not initialize it again as it has already been done when you have started the sync.
Or if you want to solve the errors in the source that you have just downloaded,
Open terminal and change directories to that place where you started syncing and type "repo sync -f".
These things are also published on xda but as a comment. To make it easier for developers, I am giving this as a trick. Everything is tested by myself.
Thank you for this sharing,
But I have a problem,
I live in IRAN and "GitHub" denies giving service to my country,
therefore I have to use a proxy. But the problem is VPN and Proxies can not cover git,
so I used https://github.com/... instead of git://github.com/..., repo syncs on this situation,
but it doesn't do it properly and can't parse packages due to manifests,
I mean all of source remain in ".repo" folder.
Is there any other way to download the source?
the_pirate_predator said:
Hello World!!
Lost the connectivity when syncing a repo source and had to redownload the entire source again?
Not needed anymore!
Well, many of the developers face this problem!
I am here to provide a solution which I found out myself in my experience that you can actually pause the syncing for a while and continue working on it later.
You can also correct the errors that occured during syncing!!
So now lets get our hands dirty. Its a very simple trick.
If you want to pause the repo sync for a while and resume it later time of the day, press "CTRL + Z" and to resume the sync, type "fg" and press enter.
If you want to switch off computer and do the sync tomorrow,
Press "CTRL + Z" and Switch off computer. Then tomorrow or the day you start working, open terminal and change directories to that place where you started syncing and type "repo sync". You need not initialize it again as it has already been done when you have started the sync.
Or if you want to solve the errors in the source that you have just downloaded,
Open terminal and change directories to that place where you started syncing and type "repo sync -f".
These things are also published on xda but as a comment. To make it easier for developers, I am giving this as a trick. Everything is tested by myself.
Click to expand...
Click to collapse
cool bro!!!!
thank you very much for sharing that!
Awesome.. btw does using http instead of git:// wont cause any problem right?
i have a doubt--> got error that is "Exited sync due to fetch errors". if i do repo sync -f again then syncing will start from 0 or where its left.
APKSPY - RESURRECTED
First:
I want to thank @ido for the original application -- It was his idea (and his code I've hacked :cyclops and modified.
Second:
Since Ido seems not to be active anymore I'll re-publish the application here.
Unless for some reason Ido will specifically ask me to remove it.
The original post
ido said:
ApkSpy is a simple tool I hacked up tonight which allows you to easily view the manifest of an APK (screenshots attached - not up to date though) just by double clicking it. (It can even associate with the .apk filetype, yay!)
ApkSpy relies on the aapt.exe tool from the android SDK, so you must have that installed (or just copy aapt.exe from somewhere, that's the only file needed to run ApkSpy).
Click to expand...
Click to collapse
Third:
Requires Microsoft©® .Net Framework v4
(Kind of since I've done it some time ago and waited for Ido [the orignal developer] to respond and allow or disallow me to re-publish... So, I don't remember all the changes I've already done...)
v1.8.19 CHANGELOG:
Fixed some Date parsing function (zipped file with no time stamp) in ZipStorer (by @Jaime Olivares) maybe causing some of the error reported here...
v1.8 CHANGELOG:
Changed Icon - CONTRIBUTED BY @Jarmezrocks
Removed unneeded tabs (System, Batch Rename, Log)
Minimize / Maximized restored back
v1.7 CHANGELOG:
(Actually 4.1.7.870, but the first and the last parts are internally used :fingers-crossed:)
Try to automatically find adb.exe and aapt.exe in ApkSPY directory or in PATH variable: If failed finding any of the executables, the user is asked to manually locate them
(★ Currently the location is not saved... ★).
Check if the ADB server is running and Start or ask if to Restart ADB server
Tidy up the code
Refining the original libraries written by Ido related to ADB and AAPT
Some more minor code updates
Revised most of the "General" tab (other tabs ware not touched) of the UI:
Grouped and ordered controls on form
Added DropDown of devices attached (★ Not automatically updating upon plugging... ★)
Added some control over ADB actions
Added status bar that some other details are shown, e.g. device type (Nexus, I9100...), OS version (4.1.2, 4.4.2...) and OS build (KOT49H, KVT49L...)
Added (nice looking) information panel with clickable links (for actions on the form) and coloring
Other changes (I can't recall right now, since I've done it some time ago and waited for a response from Ido for permission to republish)
(★ Maybe I'll add an option for this later, depending on my -- not to much -- free time and requested by users .... ★)
Known bugs:
Sometimes ADB fails to return build.prop property for the status bar (however it has not caused any critical problem, so (I think) it can be safely ignored) -- haven't been able (yet) to find the exact state it is happening
Please take the time to look at the application ABOUT tab
Any Other ideas are welcome!
If you like it, Don't forget to Thank me
If you enjoy using this application as much as I have enjoyed re-writing it
please donate to show your appreciation
RESERVED
Nice
Sent from my SM-N900T using Tapatalk
Good news
Bug report, every time I open this program, this dialog pops up, after click OK, this program works well.
PS, aapt.exe is in the same dir with ApkSpy
I got this errors:
1:
2:
Error in property: [email protected]@usrdata
cmlx said:
Good news
Bug report, every time I open this program, this dialog pops up, after click OK, this program works well.
PS, aapt.exe is in the same dir with ApkSpy
Click to expand...
Click to collapse
Hey dude,
I am not sure what you are doing wrong on your PC but it's certainly not the app as it works perfectly fine on my computer? Out of interest and for the sake or helping the new dev I thought I would raise a few points just to eliminate any finger pointing. There's a wishy-washy area when it comes to building/hacking things that were originally someone elses work...so yeah one can easily make great improvements yet open the door to bugs at the same time too. Anyway...thought I'd ask this:
Does aapt sit on your path? I know you said it is in the same directory, however just like a batch script in Windows it needs to "CD" or change directories to the %~dp0 if it is to understand what an executable is that happens to be sitting in the same directory as it's self. So this is is kinda directed at the new dev now. What I think is happening is that aapt is assumed to be in the system path when quite often it is not (i.e. those on XDA who have not yet played with the Android SDK properly). Put simply unless the application knows it is in the same directory as your executable it won't at all understand what aapt is. Does that make sense?
@dmagician , I would make sure that the apkspy app can do a check (even if it is a string search for the first few lines returned from aapt.exe), a simple if statement before throwing that error ....actually it would likely be an 'if not' statement. I don't have any of the code in front of me atm but I can help you out if you like? I was hacking this app myself sometime ago when ido first released it just using reshacker.
Note: If you are stuck and don't have source code you technically could write a full AutoIT wrapper for this app that could do all the checks and more and then bundle everything up into the one exe still. Check out the newer WinAPI stuff for AutoIT and in particular "Run binary" (yes that's correct you can just about run anything repackaged now and not need to deploy the original exe's or even libraries....they can all be stream fed to AutoIT @Compile time and need not be typically "installed" like you used to have to do. Anyway...I am waffling on shoot me a PM man.
@cmlx, to overcome your ApkSpy woes, and until dmagician can put his finger on what the cause is or what ido did when building it ages ago.....then you will firstly need to be patient (props to dmagician to figuring sh!t out so far) but till then where ever you have dumped the ApkSpy and aapt.exe on your system; just copy the address and put it on your system path. To do this 1) right click on My Computer or Computer if you are on Win 7 or 8. 2) Choose properties. 3) Advanced System settings and then at the bottom of tab you will see 'Environment Variables', click it and you will see some "User" and "System" options. Depending on your User access rights on the system you are running on (hopefully you are running as Admin surely?) then you can choose to edit your main system path or create a new variable in your user settings called 'path' Note User variables are always postfix to system variables but should always work anyhow.
Disclaimer: cmlx, if however you have already got an aapt.exe already existing on your system path but it is dodgy then you have to ensure that the good aapt.exe in your app directory is placed on path BEFORE the dodgy one....just sayin. Cause your system searches till it finds what it wants and then doesn't search anymore. Simple but can stuff people up quite often....and likely your case. Nowdays we tend to work from the known application location and not from a "Global environment path" when we know that there are going to be conflicts...and I can assure you that aapt is possibly the worst and most modified binary out there LOL. Hence this is also a note to the dev to ensure that ApkSpy reads from the current directory.....or like I am suggesting, wrap aapt up in the main application as well and that way there is no confusion EVER.
And I am done.....
Oh wait no I am not....sorry bug reports LOL :good: you thought I was all praise eh? Got another thing coming man
OK....so um the red boxes should explain everything. A picture says a thousand words (and yeah I needed at least 1 picture for this god damned long arsed post - sry). Um why in gods name would you remove the minimise and expand buttons? WTF? Anyway...it works but errrm yeah it doesn't wrap the text anymore? and it cuts the words off lol.
Other than that....I only really have one suggestion and it isn't even really a suggestion as I have kind of already made it so I can just give it to you if you want it? And that is that most people (well I can't say most as I am not speaking for everyone) tend not to like how apps take over their system. This isn't your fault at all in anyway as the first dev thought it was a good idea back then.....and back then hardly anything in Windows knew what a freakin apk was so it was a GOOD thing.....However now, every man and his dog wants to steel .apk extension for himself. I myself tend to be all over the shop with apks so I tend not to want to have any particular Windows app take it away from my control. I use WinZip as the main app for simple double click open as I want to see the contents of apks without needing to decompile them (great for theming) however I have apk shell extensions displaying the apks main icon to explorer, so if I set WinZip as default I get a nice lumping hunk of gold turd/box running rampet all over my Windoze bro ......so if you like I can show you my code that allows me to have default apps for specific tasks without interfering with anyones existing sh!t It looks neat too as you can right click any apk and just choose from a dropdown list what particular app you want at the time. If one has the need to use more apps then they need only put those apps in a list. There is nothing worse than double clicking an apk to find that Bluestacks or some other rubbish Windoze crApp has taken offf with your apk.
Lastly I thought I'd ask, Why no config file? Why store everything in memory? I know it's only small....but seeking for things everytime it is executed is a pain in the arse and not good practice. At the very least if you have no idea how to make an exe totally portable then you could reference a config file in the same directory....Or do as most do and write entries to the registry all neat and tucked away. If we get paranoid about "portable-ness" then we write to temporary space in the registry and make sure we clean up upon closing and/or inspect at runtime. simple!
I have plenty of AutoIT scripts that do exactly that too, so if you are stuck for ideas let me know. Anyway I have rambled enough, good luck and I will keep reporting bugs haha
Edit: That's waaaay too many emoticons. Oooops someone is a little high aren't they?
PS: I have attached my PNG of the icon I used for this bugger waaaaaay back....it's less generic and feel free to take it and abuse it and do as you please.
cmlx said:
Good news
Bug report, every time I open this program, this dialog pops up, after click OK, this program works well.
PS, aapt.exe is in the same dir with ApkSpy
Click to expand...
Click to collapse
Yes, I know of this one (and I've specifically wrote about it in the OP), it is NOT related to AAPT executable but to the way ADB is acting (sorry, out of my hands... :angel:
Explanation
The error comes from the application when trying to query the "ro.build.id" property via adb ('ADB shell getprop "ro.build.id" ') command.
I've came across this one but cannot determine the exact situation it is happening (as it can occur when first launching of the app, but after the app is loaded, clicking on refresh does not show this error)...
[ I've tried it on with the (only) two devices I own (1st dev. is stock (only the kernel is changed) 4.4.2 Nexus 4, 2nd dev. is S2-i9100 with customized RR ROM)and it seems to happen ONLY on the S2...]
It looks that in times, the getprop is being executed before the whole "build.prop" is being processed by ADB (This one I cannot control since it is happening on the ADB shell side [running on the device] -- unless MAYBE doing some [UGLY] delay after first initialization of ADB, which is, by far NOT best practice of process handling according to the literature)...
CyberianIce said:
I got this errors:
1:
2:
Error in property: [email protected]@usrdata
Click to expand...
Click to collapse
Which came first, the "SpkSpy spy stopped working" or the "Error in property" (if anyways related)?
Was it on the same run or two different runs?
As of the 1st one:
I do not have enough information from your post to check it up...
I'll post a new version which shows the exception details
As of the 2nd one:
Can you send me a copy of your /system/build.prop (so i'll be able to dig trough it and check it)?
It looks like my name-value splitter character exist as part of a given value in your build.prop .
Wooow, Long one! But it is nice to know people are using (trying) it!
Jarmezrocks said:
Hey dude,
I am not sure what you are doing wrong on your PC but it's certainly not the app as it works perfectly fine on my computer? Out of interest and for the sake or helping the new dev I thought I would raise a few points just to eliminate any finger pointing. There's a wishy-washy area when it comes to building/hacking things that were originally someone elses work...so yeah one can easily make great improvements yet open the door to bugs at the same time too. Anyway...thought I'd ask this:
Does aapt sit on your path? I know you said it is in the same directory, however just like a batch script in Windows it needs to "CD" or change directories to the %~dp0 if it is to understand what an executable is that happens to be sitting in the same directory as it's self. So this is is kinda directed at the new dev now. What I think is happening is that aapt is assumed to be in the system path when quite often it is not (i.e. those on XDA who have not yet played with the Android SDK properly). Put simply unless the application knows it is in the same directory as your executable it won't at all understand what aapt is. Does that make sense?
Click to expand...
Click to collapse
Hi
As I've replied to @clmx, This error is not related to AAPT (either executable [location or whatever] or results), but to the ADB command being used...
Jarmezrocks said:
@dmagician , I would make sure that the apkspy app can do a check (even if it is a string search for the first few lines returned from aapt.exe), a simple if statement before throwing that error ....actually it would likely be an 'if not' statement. I don't have any of the code in front of me atm but I can help you out if you like? I was hacking this app myself sometime ago when ido first released it just using reshacker.
Click to expand...
Click to collapse
Sorry I did not understand... Check for what?
Jarmezrocks said:
Note: If you are stuck and don't have source code you technically could write a full AutoIT wrapper for this app that could do all the checks and more and then bundle everything up into the one exe still. Check out the newer WinAPI stuff for AutoIT and in particular "Run binary" (yes that's correct you can just about run anything repackaged now and not need to deploy the original exe's or even libraries....they can all be stream fed to AutoIT @Compile time and need not be typically "installed" like you used to have to do. Anyway...I am waffling on shoot me a PM man.
Click to expand...
Click to collapse
I do not need the Auto-IT to wrap these files (although I am using it for other automation in windows), as I can do it right in the C# code (on one of my early versions these files was embedded...)
BTW, I know there are some antiviruses out in the wild that do not like the embedded executables -- but it can be done -- and probably will save some time to anyone using this app...
If it will be required / asked, I'll embed the 4 binaries (AAPT.EXE, ADB.EXE, and two DLL's AdbWinApi.dll and AdbWinUsbApi.dll [I'm not sure both are required]) needed by the application.
Jarmezrocks said:
@cmlx, to overcome your ApkSpy woes, and until dmagician can put his finger on what the cause is or what ido did when building it ages ago.....then you will firstly need to be patient (props to dmagician to figuring sh!t out so far) but till then where ever you have dumped the ApkSpy and aapt.exe on your system; just copy the address and put it on your system path. To do this 1) right click on My Computer or Computer if you are on Win 7 or 8. 2) Choose properties. 3) Advanced System settings and then at the bottom of tab you will see 'Environment Variables', click it and you will see some "User" and "System" options. Depending on your User access rights on the system you are running on (hopefully you are running as Admin surely?) then you can choose to edit your main system path or create a new variable in your user settings called 'path' Note User variables are always postfix to system variables but should always work anyhow.
Disclaimer: cmlx, if however you have already got an aapt.exe already existing on your system path but it is dodgy then you have to ensure that the good aapt.exe in your app directory is placed on path BEFORE the dodgy one....just sayin. Cause your system searches till it finds what it wants and then doesn't search anymore. Simple but can stuff people up quite often....and likely your case. Nowdays we tend to work from the known application location and not from a "Global environment path" when we know that there are going to be conflicts...and I can assure you that aapt is possibly the worst and most modified binary out there LOL. Hence this is also a note to the dev to ensure that ApkSpy reads from the current directory.....or like I am suggesting, wrap aapt up in the main application as well and that way there is no confusion EVER.
Click to expand...
Click to collapse
The application IS searching for AAPT and ADB executables; The order is
Application directory (where ApkSpy.exe resides)
PATH environment variable
Jarmezrocks said:
OK....so um the red boxes should explain everything. A picture says a thousand words (and yeah I needed at least 1 picture for this god damned long arsed post - sry). Um why in gods name would you remove the minimise and expand buttons? WTF?
Click to expand...
Click to collapse
Mostly I like it this way, otherwise - No specific reason...
It will be back in the next version...
Jarmezrocks said:
Anyway... it works but errrm yeah it doesn't wrap the text anymore? and it cuts the words off lol.
Click to expand...
Click to collapse
This Tab was NOT changed by me in any way... To be honest, I've thought of removing it completely -- But -- out of respect to Ido's work -- I've left it in.
I assume it is not wrapping due to Font size changed by me globally...
I'm seriously giving it second thoughts -- if it should stay at all (It was originally meant for batch rename of multiple APK's... I haven't used it even once...)...
I'm Really, REALLY, think of removing it completely (unless someone is / will be using it -- then I'll fix it all)...
Jarmezrocks said:
Other than that....I only really have one suggestion and it isn't even really a suggestion as I have kind of already made it so I can just give it to you if you want it? And that is that most people (well I can't say most as I am not speaking for everyone) tend not to like how apps take over their system. This isn't your fault at all in anyway as the first dev thought it was a good idea back then.....and back then hardly anything in Windows knew what a freakin apk was so it was a GOOD thing.....However now, every man and his dog wants to steel .apk extension for himself. I myself tend to be all over the shop with apks so I tend not to want to have any particular Windows app take it away from my control. I use WinZip as the main app for simple double click open as I want to see the contents of apks without needing to decompile them (great for theming) however I have apk shell extensions displaying the apks main icon to explorer, so if I set WinZip as default I get a nice lumping hunk of gold turd/box running rampet all over my Windoze bro ......so if you like I can show you my code that allows me to have default apps for specific tasks without interfering with anyones existing sh!t It looks neat too as you can right click any apk and just choose from a dropdown list what particular app you want at the time. If one has the need to use more apps then they need only put those apps in a list. There is nothing worse than double clicking an apk to find that Bluestacks or some other rubbish Windoze crApp has taken offf with your apk.
Click to expand...
Click to collapse
The application is NOT taking over anything, Unless you've clicked the asterisk ("*") button on the System Tab...
Was it registered for you without clicking this button?
If so, I'll recheck the code (may be it's some residue from the original code).
BTW
As the previous part of the answer I've wrote -- this one was left in as of respect to @ido's work...
2nd BTW
I'd like to see that explorer extension (and [preferable] the code of it - if you are willing to share it) you ware writing about...
Jarmezrocks said:
Lastly I thought I'd ask, Why no config file? Why store everything in memory? I know it's only small....but seeking for things everytime it is executed is a pain in the arse and not good practice. At the very least if you have no idea how to make an exe totally portable then you could reference a config file in the same directory....Or do as most do and write entries to the registry all neat and tucked away. If we get paranoid about "portable-ness" then we write to temporary space in the registry and make sure we clean up upon closing and/or inspect at runtime. simple!
Click to expand...
Click to collapse
Yep, I've thought of it... But... I was thinking, that (at least) everyone is as geeky as me dauuh , and the most are setting the path correctly...
It'll be added in next version (I hope... TIME, TIME!!!! :cyclops...
Jarmezrocks said:
I have plenty of AutoIT scripts that do exactly that too, so if you are stuck for ideas let me know. Anyway I have rambled enough, good luck and I will keep reporting bugs haha
Click to expand...
Click to collapse
I prefer writing my own code (sorry, I'm a developer in heart and soul...) then using automation like Auto-IT...
Jarmezrocks said:
Edit: That's waaaay too many emoticons. Oooops someone is a little high aren't they?
Click to expand...
Click to collapse
Jarmezrocks said:
PS: I have attached my PNG of the icon I used for this bugger waaaaaay back....it's less generic and feel free to take it and abuse it and do as you please.
Click to expand...
Click to collapse
(@Jarmezrocks please see my PM to you.)
PHEW...
Long Answer, BUT HEY, I'm not the only one writing longies... :angel: (and i like referencing each and every part separately)...
dmagician said:
PHEW...
Long Answer, BUT HEY, I'm not the only one writing longies... :angel: (and i like referencing each and every part separately)...
Click to expand...
Click to collapse
Ahh yes. I write long messages sometimes when my medication has kicked in and I am high....not my fault I kinda need to get all the info out of my head in one go while I am awake.....or else there would just be zeds on the response zzzzzzzzzzzzzzzzzzzzzz lol :laugh: (ref narcolepsy).
I commend you on your efforts at responding to such gibberish and making good sense of it! :highfive:
I have responded to your PM accordingly, and hopefully covered all you need? I have attached all info and sources etc.....well most of it...actually a fair bit of it you will have to workout your self but that is part the fun. Shoot me any questions if you need to...although I have a feeling that you will have mostly all of it covered as you are streets ahead of my knowledge already. I may have misjudged a little in my previous post (although hopefully not to make you feel any less than you actually are? please excuse me if I had said anything that may offended - being naive or what ever....you ARE definitely on the right track). As for the middle menu....I think you could easily remove it and not offend the original dev. It wasn't being used as you mention...and I think it could make way for more/better functionality don't you think? (discuss). However I would ensure all the things I mentioned in my PM first before going too deep and releasing on here.
Good move on bringing the buttons back. They were functional. But I DO like the single button close GUI myself on just about everything else....It looks clean. We have similar taste in that regard. It just isn't functional for me to pressing the task notification desktop link everytime I want to minimise the app LOL.
The rest I we can discuss via PM, this is pretty much only posted here as an open area for other forum members to provide input and opinion (or complaint....like how often it usually is, eh?).
CyberianIce said:
I got this errors:
1:
2:
Error in property: [email protected]@usrdata
Click to expand...
Click to collapse
I'd got the same error!
For me it helped to copy two files to the install dir
"adb.exe" and "AdbWinApi.dll"
Both are installed with the well known MyPhoneExplorer into "Program Files\MyPhoneExplorer\DLL"
Hope it helps!
Feature Request
I use this tool for testing new APK builds on a project I am working on it. It allows me to quickly verify the version number and push to the device. However, since I am usually installing another version of an existing installed APK, I must manually uninstall before using APKSPY. Would it be possible to add a check box that would uninstall any previous versions? It would be really helpful.
Nevermind - I didn't fully read the message presented when it fail. It say uninstall/update and it allows the installation. HOWEVER, that brings up a question... Does it uninstall or does it update? There is a difference as you know.
Thanks,
Jonathan
Hi, I try to run this on Mac via Wineskin Winery, but no luck. Do I need something like .Net, or something else to run ApkSpy?
Thank you.
Ja_som said:
Hi, I try to run this on Mac via Wineskin Winery, but no luck. Do I need something like .Net, or something else to run ApkSpy?
Thank you.
Click to expand...
Click to collapse
The only requirement is the Microsoft .Net 4.
(I'll add this to OP)
jmo said:
I use this tool for testing new APK builds on a project I am working on it. It allows me to quickly verify the version number and push to the device. However, since I am usually installing another version of an existing installed APK, I must manually uninstall before using APKSPY. Would it be possible to add a check box that would uninstall any previous versions? It would be really helpful.
Nevermind - I didn't fully read the message presented when it fail. It say uninstall/update and it allows the installation. HOWEVER, that brings up a question... Does it uninstall or does it update? There is a difference as you know.
Thanks,
Jonathan
Click to expand...
Click to collapse
Yes I know there is difference between the two (update vs uninstall and install again).
It is updating the application (like using "adb install -r apk_file_name.apk"), not doing remove and install
Removed unneeded tabs (System, Batch Rename, Log)
Click to expand...
Click to collapse
The unneeded Batch Rename tab was the only tab I needed really. :laugh: Luckily I found Ido's original version. It's ideal for renaming all those apk's I downloaded and still have the package name when I back them up to my PC.
I have an Asus Memo Pad 10 and an Asus Memo Pad 7 and neither are recognised by APKSpy. Not that it's a problem as I have no problem copying to and from them with Windows Exploder or Total Commander.
Other than that, it's been a handy little app for this tablet/smartphone virgin newbie.
Martin.
wolrik said:
The unneeded Batch Rename tab was the only tab I needed really. :laugh: Luckily I found Ido's original version. It's ideal for renaming all those apk's I downloaded and still have the package name when I back them up to my PC.
I have an Asus Memo Pad 10 and an Asus Memo Pad 7 and neither are recognised by APKSpy. Not that it's a problem as I have no problem copying to and from them with Windows Exploder or Total Commander.
Other than that, it's been a handy little app for this tablet/smartphone virgin newbie.
Martin.
Click to expand...
Click to collapse
Hello.
1st:
I can -- if requested - re-add the Batch rename.
2nd:
I don't know why these two devices are not being recognized -- unless not being recognized by ADB itself -- since I'm spawning devices by parsing the resulting text of "ADB devices" command, So unless being unrecognized by ADB, there should be NO PROBLEM detecting ANY android device with ADB on...
if you have any exception messages thrown by the application, please post them here.
dmagician said:
Hello.
1st:
I can -- if requested - re-add the Batch rename.
2nd:
I don't know why these two devices are not being recognized -- unless not being recognized by ADB itself -- since I'm spawning devices by parsing the resulting text of "ADB devices" command, So unless being unrecognized by ADB, there should be NO PROBLEM detecting ANY android device with ADB on...
if you have any exception messages thrown by the application, please post them here.
Click to expand...
Click to collapse
No need to re-add the tab just for me, but thanks for the offer. As I get to know my way around Android I'll probably need such things less and less.
Sorry, but I know nothing about ADB other than APKSpy needing it. As you can see from the attached pic, the Asus is recognised by Total Commander
Martin.
Hi dmagician,
Nice work, and a shout-out to Ido who originally created it.
I have a feature request:
Could you add the option to remove certain permission(s) and save the modified APK file?
There are many apps which I feel allow themselves way too much permissions, and this option could be very useful to tame them apps.
One more thing:
I noticed that APKSpy v1.8.2 doesn't work with the latest version of AAPT.exe (1432KB), from the Android SDK r24.
So I had to use a previous version of AAPT.exe (833KB), which worked.
Thanks,
Eric
Hey does anybody know where the name of the apk is in the XML files inside the apk?