I have SU760
What have I done:
Installed: USB driver
Installed LG Mobile Support Tool
Enabled debugging mode by USB in settings.
Connected device and automaticly updated firmware to 2.3.5
For rooting I downloaded archive at http://vulnfactory.org/blog/2012/02/26/rooting-the-lg-thrill-optimus-3d/ and executed run.bat in Windows 32bit (!)
Installed SuperSU from Market to checked rooting and gave it rights.
Downloaded LG P920 flasher and installed ClockWorkMod-Recovery-Touch 5.8.1.8
I entered in Recovery mode, tried tou install zip image, but: «Can't mount /emmc/»
Searched and googled to solve this problem on exact device, but no result....
UPD Solution:
Install CWM for SU760 [SU760]ClockworkMod Recovery v5.8.1.5
I tried not touch CWM but result is the same.
Where can I find CWM that suitable for my SU760?
UPD:
I tried to install [SU760]ClockworkMod Recovery v5.8.1.5 after previous ClockWorkMod-Recovery. Now I can't boot into recover neither with 3 buttons pressed nor special soft (Rebooter).
Finally it works!
Related
hope you can help
LG C660R Optimus Pro
Gingerbread 2.3.4
Kernel 2.6.35.10
rooted via nandroot app: Poot
root was fine
installed chainfire SU & Busybox
downloaded ROM manager w/ correct CWM version type as reccommended ( LG Optimus Pro )
accidentally hit Boot to recovery via rom manager
now device is stuck at LG logo
no recovery
no hard reset
only emergency mode
HOWEVER
i dont have a PC so id like to try to fix it via sd card without a PC
also, before root i made a build.prop backup via ROM toolbox and it is saved in my external sd card. maybe if i could run that or find a way to flash stock recovery it might help push the process along?
thanks in advance!
I installed Kitkat build 4 custom ROM by Vaibhav on my GT-I8262 following the procedures he describes in his blog (using Odin3, CWM, installing device drivers).
the smart phone rebooted correctly in normal mode. I tried to open SuperSU (preinstalled by the ROM) and it closed because it couldn't find the binary. Then I installed Farmaroot and tried too root the device. By ending the rooting it said that binary should be installed and the recommended method is using CWM/TWRP. By selecting the CWM/TWRP option device rebooted to the CWM recovery mode.
* I don't know how to install the binary in this mode.
* The device is stuck in CWM recovery mode.
* PC (Odin) does not recognize the device.
* selecting "reboot to bootloader" boots the device in download mode.
help me please.
great job
My phone is now bricked after installing CWM and SuperSu app.
I have the stock Android 4.1.2 installed.
I used Odin to install CWM v6.0.3.2
At first it worked OK and I could root the device and boot into android.
Next I installed SuperSu app, which asked me to update the binary and offered to do as [Normal] or [CWM]. I chose the CWM option and it rebooted into CWM Recovery mode but there was no option to install the supersu binary. Now, I cannot escape the CWM recovery screen, everytime I reboot it just opens CWM.
Odin no longer recognises the device. Windows device manager finds the device but it is in unknown devices section (yes I have smasung drivers installed).
If I boot the device to Download mode, after about 3 seconds it reboots into CWM Recovery mode.
How do I unbrick this?
OK so suddenly the Download mode starts working again, so Odin finds the device and I installed a newer version of CWM. It now boots up OK into Android, for now...
My Lenovo A3500 is no turning on after flashing the stock rom via sp flashtools, it didn't flash completely, it failed before downloading. I accidentally closed the error box (which tells me where the log file is).
So before this happened, I successfully flashed the stock rom for my tablet, then I decided to flash cwm recovery (I found a compatible version), Then I tried flashing the cwm recovery via spflashtool but it tells me that "PMT changed for the rom. It must be downloaded". So I decided to reinstall the stock rom with the CWM recovery. So I selected the scatter file for the stock rom and I just changed the path of the recovery to the CWM recovery, when I clicked download and connected my powered off device, It showed an error that it cant be completed (I forgot what it is, it told me there's a log file) Now my tablet doesnt start after pressing the power button, cant access anything on the tablet but when I connect it to my computer, my computer plays the sound that it found a device so that means my tablet is detected. I tried adb devices but it shows nothing. I tried flashing the stock rom again via sp flashtool but when I click download and plug in the phone the download is not starting meaning it cant detect my tablet.
So for short:
my lenovo a3500 tablet doesnt turn on after flashing stock rom, it is detected by pc (plays sound) but cant be detected by adb. It cant be detected by sp flashtool.
please help, youre my last hope pls m8s
----------------------------------------------------------------
NEVERMIND, I JUST INSTALLED THE MTK PRELOADER VCOM DRIVER AND TRIED FLASHING IT AGAIN VIA SP FLASHTOOLS THEN IT WORKED!!! PLEASE CLOSE THE THREAD. THANKS
Hello everyone,
I tried to do an official update in the stock rom (4.2.2) via the settings menu=>about=> System update and then i rebooted, it asked me to install the .zip and it said "installation aborted" and now i'm stuck on "CWM Based Recovery v6.0.4.4 modd by [email protected]" . I guess it's because thiss CWM version doesn't support higher android version than 4.2.2 ? The update was only ~7Mb , it's weird.
I tried to flash the latest recovery (CTR Recovery v3.3) but i get the error "partition recovery not support flash". I tried to use the adb command line but "adb devices" show me nothing.
is there a way to boot on the stock rom , please?
P.S: the phone was rooted but i hope that the root is still there
EDIT1:
I suceeded to connect the phone on my PC with "MTK Droid Root & Tools" but in it doesn't show all the information and the "box" at the bottom left is blue instead of green :/ I guess i'm not rooted anymore?