Related
Hello, hoping someone here can help me. I have the galaxy player 5 (yp-g70cwy/xaa). When I first got it ran a software program that only allowed it to do one thing which was rate tv programs that I watched. I did a factory reset, wiped the cache and the davlik cache as well...after that the phone would only open as far as the samsung logo.
I recently started tinkering with it again and I rooted the phone, flashed the rom, used .pit files, with odin and superoneclick. I recently used android commander and I finally saw life! The only problem is that I will either get the message the setup wizard is not working and it will leave me on a blank screen that only shows the time, battery, and whether or not the usb is connected. I can connect the usb to the computer and drag and drop stuff into the ext sd card. The internal memory and internal sd card do not read. My computer shows the yp-g70 in devices but it will not show it under removable devices.
When I connect it to android commander I can see all the files on the device and I was finally able to get the phone to the play store. I logged on using my gmail account and I was able to download apps (that all worked fine). I used some third party apps to do what the phone could not do which was open up the settings, camera, etc. The home screen is completely blank. The lock screen shows the wallpaper I downloaded but not the home screen. After awhile the phone turned off with a full battery and it will only work if I reset to factory defaults but then I have to register with google all over again. Does not save anything!
Can anyone please tell me how to fix this device. I have been working on it for a week already and no improvement.
Update
I now have the phone to where it can download items from the play store. I can use the device like normal But I had to download an app for the start key because I cannot get to the options without it. When i downloaded and rebooted the recovery it still gets stuck at the samsung logo. I have to type something into the search bar in the android commander and the phone boots to the play store. It randomly turns off and I have to recover the files all over again...I dont know. It seems like an improvement but yet I know that there is a file in this phone that is bad. I downloaded anti virus but it is still not picking up anything.
any luck on this?
I have the same one and just started looking to see how I can tinker with it .. .
Ok, here goes. I ordered a 7" tablet fromareseller on NewEgg. It's an AGPtEK TP704R. Out of the box, it didn't have Google Play Store. I tried installing it as an APK, and all it did was crash. Lo and behold, their support site had an update ready to solve the problem! I downloaded the appropriate firmware for my chipset (Rockchip 3066), fired up their updating software and...fail. Fail. FailFailFail. Yes, I tried five times, each time going over each step painstakingly so as not to miss a footnote. On the fifth attempt, the PC I had connected the tablet to bluescreened. Now all I get is the AGPtEK splash screen and NOTHING else. It isn't even recognized by Windows. I'm no stranger to modding, rooting, and flashing. I started out with my Incredible (running CM7 by the time I upgraded), and then continuing the trend with my Galaxy S3. I've had soft bricks before, nothing I couldn't boot into recovery to get myself out of...but the only button this thing has is a power button. Well, I guess it has a reset switch that seems to just shut it immediately off. Any suggestions?
TL;DR: New tablet bricked after manufacturer recommended firmware flash.:fingers-crossed:
ShdwWolf said:
Ok, here goes. I ordered a 7" tablet fromareseller on NewEgg. It's an AGPtEK TP704R. Out of the box, it didn't have Google Play Store. I tried installing it as an APK, and all it did was crash. Lo and behold, their support site had an update ready to solve the problem! I downloaded the appropriate firmware for my chipset (Rockchip 3066), fired up their updating software and...fail. Fail. FailFailFail. Yes, I tried five times, each time going over each step painstakingly so as not to miss a footnote. On the fifth attempt, the PC I had connected the tablet to bluescreened. Now all I get is the AGPtEK splash screen and NOTHING else. It isn't even recognized by Windows. I'm no stranger to modding, rooting, and flashing. I started out with my Incredible (running CM7 by the time I upgraded), and then continuing the trend with my Galaxy S3. I've had soft bricks before, nothing I couldn't boot into recovery to get myself out of...but the only button this thing has is a power button. Well, I guess it has a reset switch that seems to just shut it immediately off. Any suggestions?
TL;DR: New tablet bricked after manufacturer recommended firmware flash.:fingers-crossed:
Click to expand...
Click to collapse
Download version 1.7 of the Rockchip Batch Tool, that seems to have done the trick for me, there is a bundle of that plus the version 3.5 of the drivers for the usb floating around (not sure about policy for linking outside XDA) easy to find on google though.
Back in June, I turned on my TF700 with the dock attached, it started as usual.. I turned on my wifi, opened up my browser to look up plane tickets, then it restarted. I didn't think much of it, and when it loaded up again, I tried to look up tickets again, and it did the same thing. I gave up, closed it and zipped it up in my sleeve. It was a few hours before I got home, and when I took it out of the sleeve, it was quite warm! It was constantly rebooting and there was no way to turn if off. I left it out of the sleeve and let the battery die. I didn't use my tablet for a few days, and when I went to turn it on again, the same thing happened, and has been happening ever since. I have tried to start the tablet while connected to the dock, the wall charger, without the dock, with wifi on, with wifi off, etc. The tablet gets to the lock screen, I unlock it, and I only have about 10 seconds before it freezes and restarts. I am unable to turn off the device, because when I choose "shut down" from the menu, it shows that it's in the process of slowing down, but then the spinning wheel freezes and it vibrates and restarts before it can fully shut itself off. Since I can boot into android, I thought it was something that the tablet is trying to run upon startup that was causing problems. I was able to quickly get to settings and apps, to uninstall several apps, but nothing has helped. I used to have a task manager widget on the home screen, and uninstalled that too.
After doing research into the problem, I found that most people who have boot loop issues or constant restarting, are rooted and are experiencing difficulties with a new ROM. I am 100% stock. I have held down power and volume down. It gives me RCK, Android and Wipe. I have tried cold booting into android, but the same restart loop after 10 seconds occurs. I thought it might have been a bad firmware update that went through unbeknownst to me. So I downloaded the firmware file from ASUS, renamed and flashed it sucessfully. However, no change in the reboot problem. I am running the following version: US-epad-10.6.1.14.8-20130514. I know there's a new version out, but wasn't sure if I should try to flash that yet.
I am willing to try absolutely anything to fix the problem, with the EXCEPTION of wiping data. I know that would be the easy way to go, but I have photos and videos from my best friend's engagement and they are the only copies. If I am able to get my tablet to be stable enough to copy those off, I would then be willing to wipe and have a fresh start. I have tried connecting my tablet to my computer, and it is recognized. After it boots up and I unlock it, then the tablet begins to mount (I'm on windows 8). However, I still only have 10 seconds or so before the tablet restarts, and that's not enough time to even view the folders from the tablet.
It's been 3 months since this started, and I have done lots of research and tried lots of things, but nothing has helped yet. Since I haven't delved too deeply into the dev side of android (I've only rooted my S3) there is lots of android speak that I don't understand fully, or have experience with, like ADB. If someone is willing to offer suggestions on what to try, I am very good at following directions! Thank you for any help or leads you can offer.
Wow - you're in a difficult situation...
You being on stock I can only imagine the bootloop is caused by something you installed.
So if you can access settings and are able to uninstall apps, just keep doing it until you are back to the original stock setup.
Are you sure the files you are trying to save are still on the SD card? Don't know how you flashed 10.6.1.14.8, but flashing a complete firmware package ususally erases /data - although your persisiting bootloop indicates it didn't...... if the bootloop is caused by an app. And I can't imagine what else would cause it.
You could try to do a factory reset in Backup&Restore but you will loose the contents of your /data partition...
You can flash the 10.6.1.14.10 firmware file, but most likely you will also loose your data.
The only way I can think of to replace your bootloader and firmware without data loss is if you try to find a copy of the 10.6.1.14.10 dlpkgfile. That is the OTA update file Asus pushes out to users. It's a patch file, meaning it only replaces/updates new files and leaves everything else alone.
If you find the dlpkgfile on some forum you would have to place it into your /cache directory and reboot - and I don't know if you can copy it to your tablet before it bootloops again.
Unfortunately the reason for your bootloop is probably an app on the same partiton with the data you don't want to loose. Unless you manage to uninstall the culprit I don't see much hope....
Good luck!
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Try getting adb access, this should allow us to diagnose the problem you are experiencing.
Tablet side: go to settings, developer options (if it is not visible, tap the build number 7 times), enable USB debugging
Computer side: no idea, they say Windows 8 is a bit tricky to get the drivers installed correctly.
When you have adb running, do "adb pull /proc/last_kmsg" and post the downloaded file - it should contain valuable info about your reboots.
_that6042401 said:
Try getting adb access, this should allow us to diagnose the problem you are experiencing.
Tablet side: go to settings, developer options (if it is not visible, tap the build number 7 times), enable USB debugging
Computer side: no idea, they say Windows 8 is a bit tricky to get the drivers installed correctly.
When you have adb running, do "adb pull /proc/last_kmsg" and post the downloaded file - it should contain valuable info about your reboots.
Click to expand...
Click to collapse
He's bootlooping..... How does he go into settings and turn on USB debugging?
I think the best option maybe to flash a stock Asus ROM from their site but that will wipe all data including those photos......
zanadoo22 said:
Back in June, I turned on my TF700 with the dock attached, it started as usual.. I turned on my wifi, opened up my browser to look up plane tickets, then it restarted. I didn't think much of it, and when it loaded up again, I tried to look up tickets again, and it did the same thing. I gave up, closed it and zipped it up in my sleeve. It was a few hours before I got home, and when I took it out of the sleeve, it was quite warm! It was constantly rebooting and there was no way to turn if off. I left it out of the sleeve and let the battery die. I didn't use my tablet for a few days, and when I went to turn it on again, the same thing happened, and has been happening ever since. I have tried to start the tablet while connected to the dock, the wall charger, without the dock, with wifi on, with wifi off, etc. The tablet gets to the lock screen, I unlock it, and I only have about 10 seconds before it freezes and restarts. I am unable to turn off the device, because when I choose "shut down" from the menu, it shows that it's in the process of slowing down, but then the spinning wheel freezes and it vibrates and restarts before it can fully shut itself off. Since I can boot into android, I thought it was something that the tablet is trying to run upon startup that was causing problems. I was able to quickly get to settings and apps, to uninstall several apps, but nothing has helped. I used to have a task manager widget on the home screen, and uninstalled that too.
After doing research into the problem, I found that most people who have boot loop issues or constant restarting, are rooted and are experiencing difficulties with a new ROM. I am 100% stock. I have held down power and volume down. It gives me RCK, Android and Wipe. I have tried cold booting into android, but the same restart loop after 10 seconds occurs. I thought it might have been a bad firmware update that went through unbeknownst to me. So I downloaded the firmware file from ASUS, renamed and flashed it sucessfully. However, no change in the reboot problem. I am running the following version: US-epad-10.6.1.14.8-20130514. I know there's a new version out, but wasn't sure if I should try to flash that yet.
I am willing to try absolutely anything to fix the problem, with the EXCEPTION of wiping data. I know that would be the easy way to go, but I have photos and videos from my best friend's engagement and they are the only copies. If I am able to get my tablet to be stable enough to copy those off, I would then be willing to wipe and have a fresh start. I have tried connecting my tablet to my computer, and it is recognized. After it boots up and I unlock it, then the tablet begins to mount (I'm on windows 8). However, I still only have 10 seconds or so before the tablet restarts, and that's not enough time to even view the folders from the tablet.
It's been 3 months since this started, and I have done lots of research and tried lots of things, but nothing has helped yet. Since I haven't delved too deeply into the dev side of android (I've only rooted my S3) there is lots of android speak that I don't understand fully, or have experience with, like ADB. If someone is willing to offer suggestions on what to try, I am very good at following directions! Thank you for any help or leads you can offer.
Click to expand...
Click to collapse
I have not use this method but you could try.
You need a boot OS tool on your external sd and run it from your external sd so you can access to your internal sd to copy files from there. You can search on the internet and you should find more information on how to use them depending on what boot os you are using.. Good luck.
zanadoo22 said:
and I only have about 10 seconds before it freezes and restarts.
Click to expand...
Click to collapse
sbdags said:
He's bootlooping..... How does he go into settings and turn on USB debugging?
Click to expand...
Click to collapse
Preferably FAST.
---------- Post added at 07:51 PM ---------- Previous post was at 07:51 PM ----------
LetMeKnow said:
You need a boot OS tool on your external sd
Click to expand...
Click to collapse
What is a boot OS tool?
_that said:
Try getting adb access, this should allow us to diagnose the problem you are experiencing.
Tablet side: go to settings, developer options (if it is not visible, tap the build number 7 times), enable USB debugging
Computer side: no idea, they say Windows 8 is a bit tricky to get the drivers installed correctly.
When you have adb running, do "adb pull /proc/last_kmsg" and post the downloaded file - it should contain valuable info about your reboots.
Click to expand...
Click to collapse
I was actually able to get usb debugging turned on. It took me quite a few tries, but I did it!
I've never used adb, but here's what I've done so far.. I downloaded the Android SDK and ASUS Pad PC Suite (which contains Asus Sync).
I was able to use the command prompt to navigate to the platform-tools folder and open adb, however when I type in adb devices, it doesn't recognize my device. What steps to do I take from here to be able to use adb to see my device, so I can pull the file to diagnose what's going on? How do I know if I have the right drivers installed so my computer can see my tablet? All I did was install the asus suite. Do I need to do anything further on that end?
zanadoo22 said:
I was actually able to get usb debugging turned on. It took me quite a few tries, but I did it!
I've never used adb, but here's what I've done so far.. I downloaded the Android SDK and ASUS Pad PC Suite (which contains Asus Sync).
I was able to use the command prompt to navigate to the platform-tools folder and open adb, however when I type in adb devices, it doesn't recognize my device. What steps to do I take from here to be able to use adb to see my device, so I can pull the file to diagnose what's going on? How do I know if I have the right drivers installed so my computer can see my tablet? All I did was install the asus suite. Do I need to do anything further on that end?
Click to expand...
Click to collapse
What Windows version do you have on your PC?
You can check your drivers in Device Manager. Open it, look for your tablet under Portable Devices and check if the driver has a yellow exclamation mark next to it. You should be able to update/install/uninstall the driver from here.
Try to find out if there is a setting in your Windows version to only allow Microsoft signed drivers and disable it.
Sent from my DROID4 using Tapatalk 2
Hey gang - I've been traveling for work and just have some crappy slow satellite wifi for access. The phone has been great because I can use wifi calling and all is good.
A few weeks ago my phone crashed. When I rebooted I was at the "touch android to begin" screen. Well... fix permissions and clear caches didn't work.
So next I restored a backup from CWM.
Unfortunately, after that the phone hangs at the initial Samsung splash screen.
Now, stupid me didn't go an a six-month trip with the Android software on my laptop - so I had to wait for my wife to mail me a thumbdrive that has SOC, HOC, drivers, & etc. on it in order to do anything.
In a previous thread from when this first happened, you all recommended I use HOC to flash the phone back to stock. Which now that (yesterday) I got the thumbdrive in the mail, I am happy to do.
My problem comes from the fact that the phone hangs at the Samsung splash screen seemingly no matter what I do... zadig.exe doesn't recognize the phone on the USB port (just "unknown device") and therefore HOC can't do anything (I think?) Furthermore, I can't even get back into recovery or download mode; at least not with the several techniques I've tried so far.
Recommendations? Or am I hosed?
Thanks in advance,
JaimeZX said:
Hey gang - I've been traveling for work and just have some crappy slow satellite wifi for access. The phone has been great because I can use wifi calling and all is good.
A few weeks ago my phone crashed. When I rebooted I was at the "touch android to begin" screen. Well... fix permissions and clear caches didn't work.
So next I restored a backup from CWM.
Unfortunately, after that the phone hangs at the initial Samsung splash screen.
Now, stupid me didn't go an a six-month trip with the Android software on my laptop - so I had to wait for my wife to mail me a thumbdrive that has SOC, HOC, drivers, & etc. on it in order to do anything.
In a previous thread from when this first happened, you all recommended I use HOC to flash the phone back to stock. Which now that (yesterday) I got the thumbdrive in the mail, I am happy to do.
My problem comes from the fact that the phone hangs at the Samsung splash screen seemingly no matter what I do... zadig.exe doesn't recognize the phone on the USB port (just "unknown device") and therefore HOC can't do anything (I think?) Furthermore, I can't even get back into recovery or download mode; at least not with the several techniques I've tried so far.
Recommendations? Or am I hosed?
Thanks in advance,
Click to expand...
Click to collapse
Interesting problem. I have bricked my phone a bunch of times and have always been able to get back to at least "download Mode". The method I use to go to "Download Mode" is With the usb cable plugged into the computer only, power off the phone. If phone wont power off, or stay powered off, pull battery, then put battery back in. Now hold vol down and vol up buttons only, keep holding these buttons as you plug the usb cable into the phone. In 3 seconds the download screen should appear. I hope this helps you get your phone back.
JaimeZX said:
Hey gang - I've been traveling for work and just have some crappy slow satellite wifi for access. The phone has been great because I can use wifi calling and all is good.
A few weeks ago my phone crashed. When I rebooted I was at the "touch android to begin" screen. Well... fix permissions and clear caches didn't work.
So next I restored a backup from CWM.
Unfortunately, after that the phone hangs at the initial Samsung splash screen.
Now, stupid me didn't go an a six-month trip with the Android software on my laptop - so I had to wait for my wife to mail me a thumbdrive that has SOC, HOC, drivers, & etc. on it in order to do anything.
In a previous thread from when this first happened, you all recommended I use HOC to flash the phone back to stock. Which now that (yesterday) I got the thumbdrive in the mail, I am happy to do.
My problem comes from the fact that the phone hangs at the Samsung splash screen seemingly no matter what I do... zadig.exe doesn't recognize the phone on the USB port (just "unknown device") and therefore HOC can't do anything (I think?) Furthermore, I can't even get back into recovery or download mode; at least not with the several techniques I've tried so far.
Recommendations? Or am I hosed?
Thanks in advance,
Click to expand...
Click to collapse
This sounds like a time where a jig would be helpful. Any chance you can have your wife order one, and send to you? http://www.youtube.com/watch?v=D7I4dFX_iJ4
This should put you straight into download mode, and you can then flash.
Thanks, guys. I continued fiddling and got the phone into DL mode.
I also noted that when plugging and unplugging the phone, it would show up in zadig as "unknown device."
I tried to load the drivers on that, but (a) it still shows up as "unknown device" and (b) when I run HOC it doesn't see the phone under the list of compatible devices.
So.... still kind of stuck.
Any more ideas?
Oop. duplicate post
It's been awhile since I've played with the one clicks, but, "serial gadget" is what I remember seeing when I used them.
Right. MORE messing around later and "Serial Gadget" is it.
That said, I still think I have a driver issue. I have tried uninstalling and reinstalling the zadig-recommended drivers for Serial Gadget several times. I also tried manually installing the drivers from Super One Click.
Anyway, now when I load up HOC I get the green <<connected>> at bottom; but then sometimes it wants me to install the drivers (again) and sometimes it gets past that part, but then goes to
Flashing Kernel: 0%
...hangs there for about 10 seconds and then
Failed!
So... driver thing you think?
Thanks again,
If you reboot the phone after the 0% hanging for 10 seconds, does it go to the yellow exclamation mark screen? If so, just reflash again and you should be back to working... both my and my wife's phone always did that when I had to flash a kernel.
That's just another download screen that theraze is describing.
Exacatly. But the alternate download screen always came up after restarting the phone after a 'failed' flash where it stayed at 0% where it was successfully communicating through the cable. That just meant to not break the drivers or unplug anything... just reboot fast and finish up quickly.
Okay - I can definitely try that! It had not occurred to me to try and reboot the phone right then.
Question, though - when I get the "Failed!" Then HOC essentially hangs, when it says something along the lines of "ending session..." and never progresses from there. So how do you "restart quickly?" Because I have to like, close and reopen HOC. I guess I will see if it succeeds at ending the session when I reboot.
I will try it again. Strange though, sometimes HOC accepts the existing driver (I managed to DL the Samsung driver installer) and sometimes it wants to reinstall "WinUSB." does that make sense? Is the WinUSB an acceptable one?
The winusb is the right driver for heimdall, it doesn't like the Samsung driver.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Samsung drivers and the one click drivers clash. Yes, uninstall Samsung completely if you want to use the one click.
Hm. Thanks for that - might be part of the problem.
Dunno what I did differently, if anything, but last night I tried flashing again and this time it went through! I was very glad to see the whole HOC process completed successfully!
So anyway - thanks so much for the help, guys.
Hello All.
So the other day I paid a visit to the local skip, as you do, and I found a Flytouch Superpad 7 in its' box, so I took it home.
Plugged it in and it started to boot up, first screen had "Tablet PC powered by...." then the next screen was of the Android Droid with its' arms folded, it usually freezes here. Sometimes it will go onto a screen with "Android" in the centre, but no further.
So I have tried various combination of pressing buttons to no avail. Cannot access a recovery anything.
I took it apart and found it is a Yones Top Tech BC1003, so have been searching and searching for information and roms etc for days.
What I would like to know is, do you think this tablet is saveable?
I have plugged it into my laptop but it doesn't recognise it, but wouldn't the tablet have to boot to be recognised?
I have read thread upon thread, but still do not understand how I could get a rom onto this tablet if it is not recognised by the laptop and it doesn't show a recovery section where I could boot from a SD Card.
Any advice gratefully accepted. Just trying to save something from the landfill.
Just an update to say I managed to get the tablet up and running.
I ended up going to a lot of foreign language website through Google Translate and found some firmware for this board at the Koncaso site. Burned the .img file and put it in the tablet, which now works again.