Database Info

Suck on HTC logo

My device is stuck on HTC logo, i can enter into recovery mode, but i can't flash nothing, always the same error: getprop ro.product.device.
Can anyone help me with this? I noticed this problem:
C:\android-tools>Fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.85.0005
(bootloader) version-baseband: 26.03.02.26_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0425
(bootloader) version-main: 1.34.405.5
(bootloader) serialno: ***************
(bootloader) imei: ***************
(bootloader) product: vision
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PC1011000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4174mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-9ddda97c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.008s

Problem?...
Your entire setup has nothing to do with Saga
This is a good reason for some people to stay S-ON or go through an exam before getting XTC Clip.
Good for you that you have superCID. Use a RUU for Desire S this time
P.S.: and remove the IMEI from your post
Sent from my HTC Desire S

+1 - I think that's a Desire Z listing (that's what the HTC Vision was marketed as for the international market).
Also - remove your IMEI number from the listing. Never, ever post that info unless you don't actually want to be able to keep on using your phone.

I have received phone in this state. I can't install official rom (error 130). Goldcard change nothing, still error 130.

blasei said:
I have received phone in this state. I can't install official rom (error 130). Goldcard change nothing, still error 130.
Click to expand...
Click to collapse
So - what model of phone is it? If you're not sure then take the battery out and get the model information off there.

SimonTS said:
So - what model of phone is it? If you're not sure then take the battery out and get the model information off there.
Click to expand...
Click to collapse
Desire Z of course. Sorry, my mistake.

blasei said:
Desire S of course.
Click to expand...
Click to collapse
Well ... Your phone thinks it's a Desire Z - based on the bootloader info - so I would suggest that you put a different bootloader on there.

i have some problem too..
my htc stuck on recovery mode only

Unless you have flashed a ROM for the Desire S onto a Desire Z then you haven't got the same problem.
Don't just hop onto someone else's thread unless you have got exactly the same problem or can contribute.
Open a new thread with all the details that you should give and you are more likely to get help.
But ... make sure you search and read properly first as the answer to 99% of problems is already out there.
Sent from the darkest corners of my mind.

[Q] Which RUU?

So I have a tmobile htc one s but I bricked it kind of with the latest ruu and I'm s-on...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0005
(bootloader) version-baseband: 1.13.50.05.25
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ****(I edited this out)
(bootloader) imei: ****(I edited this out)
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOBO10
(bootloader) battery-status: good
(bootloader) battery-voltage: 4156mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 8be28a51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any suggestions for which ruu I should flash I'm assuming the tmobile one is the right ruu but it keeps giving me a customer id error so I'm thinking somewhere along the line I changed something that requires me to flash a diff ruu... s-off process or something like that.. Just a theory give me your feedback all is welcome. If I need tmobile to replace it should I just tell them that this was related to their latest update because I heard that there are a lot of customers with the same issue and if it was their fault I see no reason for me to suffer LOL.

tylerjholmgren said:
So I have a tmobile htc one s but I bricked it kind of with the latest ruu and I'm s-on...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0005
(bootloader) version-baseband: 1.13.50.05.25
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ****(I edited this out)
(bootloader) imei: ****(I edited this out)
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOBO10
(bootloader) battery-status: good
(bootloader) battery-voltage: 4156mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 8be28a51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any suggestions for which ruu I should flash I'm assuming the tmobile one is the right ruu but it keeps giving me a customer id error so I'm thinking somewhere along the line I changed something that requires me to flash a diff ruu... s-off process or something like that.. Just a theory give me your feedback all is welcome. If I need tmobile to replace it should I just tell them that this was related to their latest update because I heard that there are a lot of customers with the same issue and if it was their fault I see no reason for me to suffer LOL.
Click to expand...
Click to collapse
Which T-Mobile RUU? There are lots of T-Mobile RUUs for Netherlands and the UK, your customer ID is T-Mob010 you need a TMoUS one.
Sent from my HTC One S using Tapatalk 2

usaff22 said:
Which T-Mobile RUU? There are lots of T-Mobile RUUs for Netherlands and the UK, your customer ID is T-Mob010 you need a TMoUS one.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe is the current ruu I've tried to flash and I've also tried 2.35 tmous ruu. All get stuck and give me customer id error.

tylerjholmgren said:
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe is the current ruu I've tried to flash and I've also tried 2.35 tmous ruu. All get stuck and give me customer id error.
Click to expand...
Click to collapse
I can't find a jb version for T-Mobile UK ruu
Sent from my HTC One S using xda premium

tr1gg3r84 said:
I can't find a jb version for T-Mobile UK ruu
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
There's none. Use a 1.78 RUU and do the OTA
Sent from my HTC One S using Tapatalk 4 Beta

usaff22 said:
There's none. Use a 1.78 RUU and do the OTA
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
I found a ruu I got from football awhile ago. but when I try to install it im getting a 155error I have used this ruu before but forgot what I did when I got that error last time. anyone help me on that?
---------- Post added at 02:45 PM ---------- Previous post was at 02:29 PM ----------
tr1gg3r84 said:
I found a ruu I got from football awhile ago. but when I try to install it im getting a 155error I have used this ruu before but forgot what I did when I got that error last time. anyone help me on that?
Click to expand...
Click to collapse
its a tmobile uk ics im sure, do I need a recovery stock img? isthat why I getting the error? if anyone got a ics stock recovery that be a help

How to unbrick HTC One with ruu

So this is my first post, and I have a problem with bricked HOX.
I tried to put custom ROM, ViperX, with CWM (previously I unlocked bootloader and flashed with custom CWM recovery.img). After installation, I flashed with boot.img, but I couldn't boot. Now I have bricked, unlocked, HOX. I tried to unbrick with ruu, but ruu warned that my bootloader version is not good for ruu.
So how can I unbrick my HOX, is there ruu version for my HOX (and is there any way to unbrick it at all?)?
My HOX's specs:
CID: HTC__032
version-main: 3.20.401.3
HBOOT-1.39.0000
RADIO-5.1204.162A.29
Please help, and sorry for my bad English. I hope you understood

retsamor said:
So this is my first post, and I have a problem with bricked HOX.
I tried to put custom ROM, ViperX, with CWM (previously I unlocked bootloader and flashed with custom CWM recovery.img). After installation, I flashed with boot.img, but I couldn't boot. Now I have bricked, unlocked, HOX. I tried to unbrick with ruu, but ruu warned that my bootloader version is not good for ruu.
So how can I unbrick my HOX, is there ruu version for my HOX (and is there any way to unbrick it at all?)?
My HOX's specs:
CID: HTC__032
version-main: 3.20.401.3
HBOOT-1.39.0000
RADIO-5.1204.162A.29
Please help, and sorry for my bad English. I hope you understood
Click to expand...
Click to collapse
Wrong forum, this is for dual core. You'll wanna go here http://forum.xda-developers.com/forumdisplay.php?f=1533

RollTribe said:
Wrong forum, this is for dual core. You'll wanna go here http://forum.xda-developers.com/forumdisplay.php?f=1533
Click to expand...
Click to collapse
Thanks for for warning me.
Yes, I figured it later, so I posted in HTC One X forum.
Can somebody please remove this thread?

HTC ONE 802W Bricked
Hallo, I have the htc one 802W dual sim variant. It has HTC_802w_CWM_recovery_6.0.3.3_PhilZ_Touch_5 recovery & s-off, and the european rom version. PN07IMG_M7C_DUG_JB_50_S1_HTC_Europe_2.19.401.1_Radio_1237.21.28.0627_release_326125
My problem begins when I try to change model ID to flash the new 4.4.2 version, in the process it bricks and now is black screen, no led charging, but PC recognizes it when I connect by USB cable.
The fastboot getvar all is:
C:\SDK Android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.39.2000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: (IMEI deleted for privacy reasons, but is OK)
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3445mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: 080b6f61
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
C:\SDK Android\sdk\platform-tools>
I understand the English better than I write it, so I appreciate any help. A greeting.

asustekk said:
Hallo, I have the htc one 802W dual sim variant. It has HTC_802w_CWM_recovery_6.0.3.3_PhilZ_Touch_5 recovery & s-off, and the european rom version. PN07IMG_M7C_DUG_JB_50_S1_HTC_Europe_2.19.401.1_Radio_1237.21.28.0627_release_326125
My problem begins when I try to change model ID to flash the new 4.4.2 version, in the process it bricks and now is black screen, no led charging, but PC recognizes it when I connect by USB cable.
The fastboot getvar all is:
C:\SDK Android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.39.2000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: (IMEI deleted for privacy reasons, but is OK)
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3445mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: 080b6f61
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
C:\SDK Android\sdk\platform-tools>
I understand the English better than I write it, so I appreciate any help. A greeting.
Click to expand...
Click to collapse
Unfortunately you're in the wrong device forum, this is the HTC One XL form. You need to ask in your own device forum, the people there are experienced with your phone and will be able to help you.
Sent from my Evita

Sorry I post it in the correct forum, can somebody delete this? thanks in advance.
timmaaa said:
Unfortunately you're in the wrong device forum, this is the HTC One XL form. You need to ask in your own device forum, the people there are experienced with your phone and will be able to help you.
Sent from my Evita
Click to expand...
Click to collapse

RUU needed for O2 UK Please.

Hi,
Had a look around and some reason cant find the answer (sure to be told I didnt look hard enough)
Im looking for a stock RUU which match these details
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3865mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Been using custom roms for a while, but looking to go back to stock and start again if need be. Also cant seem to SuperCID this phone, any help on that would be great too.
Thanks

stoneblade said:
Hi,
Had a look around and some reason cant find the answer (sure to be told I didnt look hard enough)
Im looking for a stock RUU which match these details
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3865mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Been using custom roms for a while, but looking to go back to stock and start again if need be. Also cant seem to SuperCID this phone, any help on that would be great too.
Thanks
Click to expand...
Click to collapse
no love?

Change your CID to another, which has RUU
Sent from my HTC One S using XDA Premium 4 mobile app

Have already tried, everytime I change it (following guide on here) it reverts back to original cid
Sent from my HTC One S using Tapatalk

Been told to downgrade my radio but reading guides says I can't do this on hboot 2.15 please could someone help point me the right direction. Just want to get back to stock
Sent from my HTC One S using Tapatalk

stoneblade said:
Been told to downgrade my radio but reading guides says I can't do this on hboot 2.15 please could someone help point me the right direction. Just want to get back to stock
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
Are you on MaximusHD rom? what are you using currently?

Hi I was using magiorom and having some reboots, so want to go back to stock(just ordered Nexus 5) ready to sell on the phone. Currently have zenrom installed but would love to be able to get back to stock either Europe ruu or original O2. In the past having phone rooted lowers price because some people don't want to have the root option, and some apps don't allow it eg Barclays or sky
Sent from my HTC One S using Tapatalk

Even a nanoid without super user or root would do, just back to stock as close as possible. Major noob mistake not to make my own nanoid when first started, learnt for next time!
Sent from my HTC One S using Tapatalk

stoneblade said:
Even a nanoid without super user or root would do, just back to stock as close as possible. Major noob mistake not to make my own nanoid when first started, learnt for next time!
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
Yeah I have a nandroid in my thread. Refer to my signature. It's for T-Mobile UK but it will work for you.

khan.orak said:
Yeah I have a nandroid in my thread. Refer to my signature. It's for T-Mobile UK but it will work for you.
Click to expand...
Click to collapse
Great thanks, is it rooted? I will have a look after breakfast
Sent from my HTC One S using Tapatalk

stoneblade said:
Great thanks, is it rooted? I will have a look after breakfast
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
No it's not.
Sent from my HTC One S using Tapatalk

khan.orak said:
No it's not.
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
Mate you have saved my life, phone back to semi normal stock (add tmobile logos) but its way closer than what was on there before. Im guessing I have to leave the bootloader unlocked but can install stock recovery?

stoneblade said:
Mate you have saved my life, phone back to semi normal stock (add tmobile logos) but its way closer than what was on there before. Im guessing I have to leave the bootloader unlocked but can install stock recovery?
Click to expand...
Click to collapse
Flash Stock recovery, and then if you want, you can lock bootloader.

Can't find correct HTC One m7ul RUU.exe HELP

Hello, I'm located in Ontario Canada, with Telus and I need to return my rooted HTC One m7 back to HTC (through Telus) for warranty repairs due to a faulty top speaker and phone mic.
Every RUU.exe I try fails with "error 158" and I've tryed even with S-OFF and a whole bunch of other crap....
Basically here's my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If anyone can grab me the correct RUU.exe I would even pay you via PayPal.
I'm desperate as my warranty ends April 28th 2014
Or just get me back to stock where I can OTA update and it would be "LOCKED" "S-ON" and no "Security Warning"/"TAMPERED" in the boot-loader.
Currently running Android Revolution HD Version 62.0 <-- love by the way.
Currently have "TAMPERED" "UNLOCKED" "S-ON"

sarktheshark said:
Hello, I'm located in Ontario Canada, with Telus and I need to return my rooted HTC One m7 back to HTC (through Telus) for warranty repairs due to a faulty top speaker and phone mic.
Every RUU.exe I try fails with "error 158" and I've tryed even with S-OFF and a whole bunch of other crap....
Basically here's my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If anyone can grab me the correct RUU.exe I would even pay you via PayPal.
I'm desperate as my warranty ends April 28th 2014
Or just get me back to stock where I can OTA update and it would be "LOCKED" "S-ON" and no "Security Warning"/"TAMPERED" in the boot-loader.
Currently running Android Revolution HD Version 62.0 <-- love by the way.
Currently have "TAMPERED" "UNLOCKED" "S-ON"
Click to expand...
Click to collapse
Thats easy --> LINK

LS.xD said:
Thats easy --> LINK
Click to expand...
Click to collapse
Yeah it didn't work
Here are some pics:

sarktheshark said:
Yeah it didn't work
Here are some pics:
Click to expand...
Click to collapse
If you want a fast solution install Teamviewer and i'll fix it.
If you want it on your own:
-flash stock recovery contained in the RUU before installing RUU
-relock bootloader
-uninstall HTC Sync and all other software affecting USB connection, Samsung KIES and so on
-check if device is shown up in device manager correctly
-run RUU as admin
-close running adb instances
-...
It will work if you do right as its the 100% matching RUU for your device/firmware

LS.xD said:
If you want a fast solution install Teamviewer and i'll fix it.
If you want it on your own:
-flash stock recovery contained in the RUU before installing RUU
-relock bootloader
-uninstall HTC Sync and all other software affecting USB connection, Samsung KIES and so on
-check if device is shown up in device manager correctly
-run RUU as admin
-close running adb instances
-...
It will work if you do right as its the 100% matching RUU for your device/firmware
Click to expand...
Click to collapse
What is teamviewer?
Will you have access to my pc?

sarktheshark said:
What is teamviewer?
Will you have access to my pc?
Click to expand...
Click to collapse
You got it No matter if you don't like to. Just check all points i posted recently and it should work

LS.xD said:
You got it No matter if you don't like to. Just check all points i posted recently and it should work
Click to expand...
Click to collapse
Ok so can you do these easily via teamviewer?

sarktheshark said:
Ok so can you do these easily via teamviewer?
Click to expand...
Click to collapse
Think so After installing it you get a id+password. thats needed to connect. Just fixed a m7 this way some hours ago.

LS.xD said:
Think so After installing it you get a id+password. thats needed to connect. Just fixed a m7 this way some hours ago.
Click to expand...
Click to collapse
Ok, I'll pm u

sarktheshark said:
Ok, I'll pm u
Click to expand...
Click to collapse
You can read it here --> LINK

Can we proceed?
Sent from my beloved HTC One S using (most time buggy) Tapatalk

htc one m7_ul
LS.xD said:
Can we proceed?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
pls help! im stuck on HTC screen on my htc one after i flash ARHD 62.,any help would be appreciated much...thanks!

josemanuelvalles28 said:
pls help! im stuck on HTC screen on my htc one after i flash ARHD 62.,any help would be appreciated much...thanks!
Click to expand...
Click to collapse
Solved?

I can't find RUU file
LS.xD said:
Solved?
Click to expand...
Click to collapse
Can you help me? I also can't find RUU file for my HTC. And can you give me some instruction how to use correctly RUU ??
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.26.3263.05
version-cpld: None
version-microp: None
version-main: 4.24.69.5
version-misc: PVT SHIP S-ON
serialno: FA382W903337
imei: ----------------
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANGB10
battery-status: good
battery-voltage: 4266mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-660ef031
hbootpreupdate: 11
gencheckpt: 0
I have unlock bootloader, S-ON and TAMPERED flag
I have problem with vibractions and i would like to send my phone for warrant
Please help me