Database Info

[Q] modem file for i9082

Can't post to original post, no right, have to post here, if admin can move it to follow original post will be appreciated.
original post:
http://forum.xda-developers.com/showthread.php?p=38325224
After flash the rom made by k2wl I experienced no service problem. I follow the instruction to patch the modem file but it can not be downloaded. Can anyone share that file with me? thanks a log
1. you may experience "no service " after rom installation here is what u do to get it back...
its a modem compatibility issue in between different firmwares
download the file from http://www.mediafire.com/?avjo48kvgz517z5
put ur mobile in download mode VOLUME DOWN + MENU + POWER then VOLUME UP to continue
connect to pc
(ur kies should not be runing... proper drivers should be installed)
start odin3 v3.04 . u should see the blue comxx as phone is connected
autoreboot and reset time should be selected.
click in PDA . select the modem.amc8.tar
click start...wait....u get pass confirmation..phone may boot into recovery just reboot...
Click to expand...
Click to collapse

deserteagle369 said:
Can't post to original post, no right, have to post here, if admin can move it to follow original post will be appreciated.
original post:
http://forum.xda-developers.com/showthread.php?p=38325224
After flash the rom made by k2wl I experienced no service problem. I follow the instruction to patch the modem file but it can not be downloaded. Can anyone share that file with me? thanks a log
Click to expand...
Click to collapse
try this modem
http://d-h.st/7O8

[Resolved] [Q] Samsung Galaxy Beam GT-I8530 Baseband Unknown

Hi there!
I was tinkering about on the system files of my Galaxy Beam, and (maybe) accidentally messed up with the partition of the device.
The device runs on Jelly Bean 4.1.2 and now its mobile data service is disabled, and when I checked the baseband it says "XXXX" (I believe this is the same case as baseband unknown).
I tried to repair it using Szaby59's method (http://forum.xda-developers.com/showthread.php?t=2145464), but to no avail.
I wonder if there is another way to restore the baseband of my phone? I understand I might have messed with the efs and modemfs files, will it help if there is anyone who is kind enough to share his/her stock efs/modemfs files, and I get to use those files to my phone?
Hope the information was clear enough, thanks in advance.

ardjet said:
Hi there!
I was tinkering about on the system files of my Galaxy Beam, and (maybe) accidentally messed up with the partition of the device.
The device runs on Jelly Bean 4.1.2 and now its mobile data service is disabled, and when I checked the baseband it says "XXXX" (I believe this is the same case as baseband unknown).
I tried to repair it using Szaby59's method (http://forum.xda-developers.com/showthread.php?t=2145464), but to no avail.
I wonder if there is another way to restore the baseband of my phone? I understand I might have messed with the efs and modemfs files, will it help if there is anyone who is kind enough to share his/her stock efs/modemfs files, and I get to use those files to my phone?
Hope the information was clear enough, thanks in advance.
Click to expand...
Click to collapse
hi ardjit the tow folders that u asked for they are zipped and attached above :good:

alameralshamry said:
hi ardjit the tow folders that u asked for they are zipped and attached above :good:
Click to expand...
Click to collapse
thanks a lot man! will try to replace the modemfs file in my phone with the ones you just gave, hopefully this'll work!

IT WORKEDD!!!
I replaced the modemfs folder in the root directory, with the ones given by alameralshamry, rebooted my phone, and voila! data plan is back!
thanks a million to alameralshamry...and hope this thread may help anyone with similar problem.

ardjet said:
IT WORKEDD!!!
I replaced the modemfs folder in the root directory, with the ones given by alameralshamry, rebooted my phone, and voila! data plan is back!
thanks a million to alameralshamry...and hope this thread may help anyone with similar problem.
Click to expand...
Click to collapse
im happy to know that its worked with you ... you are welcome

i8530
ardjet said:
IT WORKEDD!!!
I replaced the modemfs folder in the root directory, with the ones given by alameralshamry, rebooted my phone, and voila! data plan is back!
thanks a million to alameralshamry...and hope this thread may help anyone with similar problem.
Click to expand...
Click to collapse
how replaced modemfs folder

i m unable to download your files..
please help me... thanks in advance.

alameralshamry said:
hi ardjit the tow folders that u asked for they are zipped and attached above :good:
Click to expand...
Click to collapse
agan can ask EFS has a backup folder that agan ga bin or img shape.

alameralshamry said:
hi ardjit the tow folders that u asked for they are zipped and attached above :good:
Click to expand...
Click to collapse
I just registered and replied this post with many thanks! Because I also had headache with my i8530 phone which lost the baseband info.
Your file of "modemefs.zip" REALLY worked on my I8530 phone! I unzipped the files and copied into the root directory of "modemefs", then reboot, finally the baseband came back!!!:good:
I almost decided to throw away this cell phone before I found this post. You have greatly helped me to solve my problem.
Many thanks again!

alameralshamry said:
hi ardjit the tow folders that u asked for they are zipped and attached above :good:
Click to expand...
Click to collapse
how to replace the modem file in root directory plz tell

imran qasim said:
how to replace the modem file in root directory plz tell
Click to expand...
Click to collapse
First make sure your phone is rooted and Root Explorer is installed.
Open Root Explorer, copy the files to /modemfs directory.
If failed to copy, one reason may be that /modelfs directory has insufficient space. Because Android system allocates different space for some specific system directories.
When you turn to /modemfs, Root Explorer will show "XX MB used, XX MB free" on the top.
If the free space is very little, you will NOT be able to replace the model file, so you need to consider to delete some useless or irrelevant files inside this directory.

Nvram warning error

Hi,
While i on my wifi, NVRAM warring error is displaying. How to solve this?

nachi9956 said:
Hi,
While i on my wifi, NVRAM warring error is displaying. How to solve this?
Click to expand...
Click to collapse
Assuming you have rooted your phone...
First of all turn on your wifi from settings.
Go-to About > Status (under settings) and Find out MAC address of your device (It looks like xx:xx:xx:xx:xx:xx)
Turn off WiFi adapter on your phone.
Run Total Commander App on your device or you can use any kind of Root explorer.
Navigate to root/data/nvram/APCFG/APRDEB and copy a file named
WIFI to your SD then computer ( I am using WIFI transfer so do not need to copy it to my own SD)
Now open that File in Hex Editor
Navigate to First Row Column number 4 to 9 insert your MAC address as per step 2.
Now over save the file and save it on same path (overwrite it)
Reboot your phone and check your WIFI by Turning it on. If you want to skip this all steps then just download Repaired WIFI file from below but we will be not responsible if any damage this file cause to your Android device.
Source: = ProtechLover

While opening the file in hex edit, the number of columns are available is 8, then how i change the 9 th column.

nachi9956 said:
Hi,
While i on my wifi, NVRAM warring error is displaying. How to solve this?
Click to expand...
Click to collapse
it will be help ful to us if u say the name of the rom u using nd getting this error...
if you r on stock rom then solution is here...
link..:-
http://androidactivists.blogspot.in/2013/03/blog-post.html
or if you r using any other then search for that rom reverse or patch or addons section if any kind of nvram error link has provided or not..

nachi9956 said:
Hi,
While i on my wifi, NVRAM warring error is displaying. How to solve this?
Click to expand...
Click to collapse
use this one bro.............very simple download it and flash it boommmmm

Hi, this zip is only for canvas ore we can use it for mm unite2

it works for the w-lan issue well,
but after that i have a new challenge
phone and blue tooth don`t work
no problem then i use the IMEI&SN Writer 1.5.3 and everything is under control
big thx
trek

dude just use this zip file for remove nvram error....just extract this zip and move the files in root folder , in root explorer search files and path for the same......100% successful working patch:good:

Back to Stock from Future 3.0 and Drake v1 or CrossDL error

Here is some guide as i faced problem to go back once from future 3.0 and the other time i installed drake v1 and it changed to d838 so when i tried to install tot it gave me error like crossDL so i figured it out after alot of search that how to go back to my stock 4.4 and now I want to share this method with you people, it may help some those who are really stuck in there. It's my own effort so if you find it helpful then plz appreciate.. thanks.
Steps to follow:
1. Download Winhex software: https://mega.co.nz/#!IUFnRRBb!JlQpWk_PiQ5NIpE2Pc7y7ovRuv3Fx-slT0A3W7ARpMc
2. Extract it and open it and there will be folder inside winhex. its pre-installed app so you don't need to install it just open folder and run the application and it give some message that you can not save larger file with evaluation version.. just open and click on help and then register option then a dialogue box will be opened and past the key you will find in the main folder text file named with "key". it will be registered version now you can open your tot file and edit it.
3. Open your tot file and click on edit and then on find then search for word "F350" and you will be there. Just change the last word with "L". if you have F350K than K with L and if you have F350S then S with L. if you want to go back from future 3.0 rom and change whole letter with "D838" and remove last digit by putting 00 on left column. you can see the pics for guide.
4. Now save the file and with this file flash your lg g pro 2 and for that i m sure you guys already have guide to flash tot file otherwise you can search for it..
Guide for flashing through tot and dll file:
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Note: I am not responsible for any damage do it at your own risk..

amir. said:
Here is some guide as i faced problem to go back once from future 3.0 and the other time i installed drake v1 and it changed to d838 so when i tried to install tot it gave me error like crossDL so i figured it out after alot of search how to go back to my stock and now want to share with you people. It my own effort so if you find out helpful then plz appreciate.. thanks.
Steps to follow:
1. Download Winhex software: https://mega.co.nz/#!IUFnRRBb!JlQpWk_PiQ5NIpE2Pc7y7ovRuv3Fx-slT0A3W7ARpMc
2. Extract it and open it and there will be folder inside winhex. its pre-installed app so you don't need to install it just open folder and run the application and it give some message that you can not save larger file with evaluation version.. just open and click on help and then register option then a dialogue box will be opened and past the key you will find in the main folder text file named with "key". it will be registered version now you can open your tot file and edit it.
3. Open your tot file and click on edit and then on find then search for word "F350" and you will be there. Just change the last word with "L". if you have F350K than K with L and if you have F350S then S with L. if you want to go back from future 3.0 rom and change whole letter with "D838" and remove last digit by putting 00 on left column. you can see the pics for guide.
4. Now save the file and with this file flash your lg g pro 2 and for that i m sure you guys already have guide to flash tot file otherwise you can search for it..
Guide for flashing through tot and dll file:
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Note: I am not responsible for any damage do it at your own risk..
Click to expand...
Click to collapse
Can this method be used for my phone which is now on Future ROM, but originally is D838 32GB?
I just need to get the tot file?

There is easy way to go back on stock for d838 model.. Use kdz method..
Secondly i didn't check on d838 model but u can check by using tot file n tot flash method.. Just search for F350L tot file.. I guess its available online.. Then u can try if it works may b it work but i m not sure..
Thirdly its my guess.but u can check if d838 firm can be edited then.edit that file and change it to f350L then use it through kdz method..
But u have to check it at ur own risks..
Sent from my LG-F350K using XDA Free mobile app

amir. said:
There is easy way to go back on stock for d838 model.. Use kdz method..
Secondly i didn't check on d838 model but u can check by using tot file n tot flash method.. Just search for F350L tot file.. I guess its available online.. Then u can try if it works may b it work but i m not sure..
Thirdly its my guess.but u can check if d838 firm can be edited then.edit that file and change it to f350L then use it through kdz method..
But u have to check it at ur own risks..
Sent from my LG-F350K using XDA Free mobile app
Click to expand...
Click to collapse
From what @orsonwang posted, his phone goes to bootloop when flash using kdz.
Your guide, I can get F350 tot file and change the hex to D838? I have found a working F350S v10e tot file and DLL. Can I use these file?

xb360 said:
Can this method be used for my phone which is now on Future ROM, but originally is D838 32GB?
I just need to get the tot file?
Click to expand...
Click to collapse
Here is link of tot file for F350L:
https://www.fshare.vn/file/TVR9DPAC7T
for dll file you can use any variant dll file because it is common for all K/L/S..

xb360 said:
From what @orsonwang posted, his phone goes to bootloop when flash using kdz.
Your guide, I can get F350 tot file and change the hex to D838? I have found a working F350S v10e tot file and DLL. Can I use these file?
Click to expand...
Click to collapse
yes orsonwang eventually did the same tot method to get his phone back that give more confidence in this method. you can check this as this modification works for all tot files.. if it works i hope it will go beyond 80% and then its ok even at the end it gives error on flash tool because in my experience it didn't able to make to 100% not even a single time but it worked for me.. you can check if didn't start flashing then you have you current at least and if it started then hopefully it will go beyond 80% and i hope it will work but not confirmed you have to make your own mind to take risk as i have no such experience i am just guessing it might work..
Best of Luck..

amir. said:
yes orsonwang eventually did the same tot method to get his phone back that give more confidence in this method. you can check this as this modification works for all tot files.. if it works i hope it will go beyond 80% and then its ok even at the end it gives error on flash tool because in my experience it didn't able to make to 100% not even a single time but it worked for me.. you can check if didn't start flashing then you have you current at least and if it started then hopefully it will go beyond 80% and i hope it will work but not confirmed you have to make your own mind to take risk as i have no such experience i am just guessing it might work..
Best of Luck..
Click to expand...
Click to collapse
It only goes till 80%, but the phone still able to boot up?

xb360 said:
It only goes till 80%, but the phone still able to boot up?
Click to expand...
Click to collapse
no it went beyond 80 but didn't complete 100.. it normally went to 92 to 93.. but once phone rebooted by itself then it should be ok..

Back to Stock
amir. said:
no it went beyond 80 but didn't complete 100.. it normally went to 92 to 93.. but once phone rebooted by itself then it should be ok..
Click to expand...
Click to collapse
Hy !
Please help me. My device is D838. I installed the "Future_V3.1_Lollipop".
How can'i revert back to STOCK D838 ?
I have D838.tot but when I try to flash it back, there is a many error messages.
I edited the build.prop to correct anything in it.
KDZ not work, only hope is the TOT method.
Please help me !
THX !!

LorinczG77 said:
Hy !
Please help me. My device is D838. I installed the "Future_V3.1_Lollipop".
How can'i revert back to STOCK D838 ?
I have D838.tot but when I try to flash it back, there is a many error messages.
I edited the build.prop to correct anything in it.
KDZ not work, only hope is the TOT method.
Please help me !
THX !!
Click to expand...
Click to collapse
Are you using the correct DLL file?
Try this DLL file: http://forum.xda-developers.com/showpost.php?p=58628114&postcount=32
This is for 32GB phone.
Your tot file is original D838 or modified from F350?
Maybe you want to try this to file, it's from TW 10D 32GB
http://forum.xda-developers.com/showpost.php?p=58628087&postcount=31
Then just follow the steps from the guide on 1st post
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
I did mine with both these files and that guide, flashed without problem.

amir. said:
Here is some guide as i faced problem to go back once from future 3.0 and the other time i installed drake v1 and it changed to d838 so when i tried to install tot it gave me error like crossDL so i figured it out after alot of search how to go back to my stock and now want to share with you people. It my own effort so if you find out helpful then plz appreciate.. thanks.
Steps to follow:
1. Download Winhex software: https://mega.co.nz/#!IUFnRRBb!JlQpWk_PiQ5NIpE2Pc7y7ovRuv3Fx-slT0A3W7ARpMc
2. Extract it and open it and there will be folder inside winhex. its pre-installed app so you don't need to install it just open folder and run the application and it give some message that you can not save larger file with evaluation version.. just open and click on help and then register option then a dialogue box will be opened and past the key you will find in the main folder text file named with "key". it will be registered version now you can open your tot file and edit it.
3. Open your tot file and click on edit and then on find then search for word "F350" and you will be there. Just change the last word with "L". if you have F350K than K with L and if you have F350S then S with L. if you want to go back from future 3.0 rom and change whole letter with "D838" and remove last digit by putting 00 on left column. you can see the pics for guide.
4. Now save the file and with this file flash your lg g pro 2 and for that i m sure you guys already have guide to flash tot file otherwise you can search for it..
Guide for flashing through tot and dll file:
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Note: I am not responsible for any damage do it at your own risk..
Click to expand...
Click to collapse
I was on Drake v1 and i flashed 4.4 rom after that phone is giving security error at boot. I downloaded tot and dll for my ph (F350s) and following your above mentioned post i edited F350s to D838 but still i am getting cross dl error. Any help pl?

Ahmed Xperia p said:
I was on Drake v1 and i flashed 4.4 rom after that phone is giving security error at boot. I downloaded tot and dll for my ph (F350s) and following your above mentioned post i edited F350s to D838 but still i am getting cross dl error. Any help pl?
Click to expand...
Click to collapse
Did u delete "S" from F350S??

amir. said:
Did u delete "S" from F350S??
Click to expand...
Click to collapse
yes id deleted S by putting 00 on left column
Should i use dll file for D838?

Ahmed Xperia p said:
yes id deleted S by putting 00 on left column
Should i use dll file for D838?
Click to expand...
Click to collapse
yes.. u should use dll for d838.. once i faced that..

amir. said:
yes.. u should use dll for d838.. once i faced that..
Click to expand...
Click to collapse
i have downloaded dll for 8d38 but not sure it's for 16 g or 32 g. Will it make any difference? If possible send me dll you flashed. Thanks
Update: Tried using D838 Dll but same error
PS: I am on windows 8.1 if this makes difference
---------- Post added at 11:27 AM ---------- Previous post was at 11:12 AM ----------
DL upgrade or Board Dl
I figured out there are these options on lg flashtool. By default upgrade dl is selected. Do i need to select board dl?

Ahmed Xperia p said:
i have downloaded dll for 8d38 but not sure it's for 16 g or 32 g. Will it make any difference? If possible send me dll you flashed. Thanks
Update: Tried using D838 Dll but same error
PS: I am on windows 8.1 if this makes difference
---------- Post added at 11:27 AM ---------- Previous post was at 11:12 AM ----------
DL upgrade or Board Dl
I figured out there are these options on lg flashtool. By default upgrade dl is selected. Do i need to select board dl?
Click to expand...
Click to collapse
bro i m using windows 7 and i m not sure if that is the case.. anyhow i am attaching dll file..

amir. said:
bro i m using windows 7 and i m not sure if that is the case.. anyhow i am attaching dll file..
Click to expand...
Click to collapse
Didint get dll file bro

Ahmed Xperia p said:
Didint get dll file bro
Click to expand...
Click to collapse
I guess this time I have attached it..

amir. said:
I guess this time I have attached it..
Click to expand...
Click to collapse
Thanks but i solved my problem my eidting and flashing kdz
Sent from my LG-D838 using XDA Free mobile app

Ahmed Xperia p said:
Thanks but i solved my problem my eidting and flashing kdz
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
Good nice to hear that..

Nokia 3 build number and serial number lost

Hello,
so I accidentally flashed Nougat through SPF Tools and choose format all + download, so I lost both serial numbers and also Build number..
I searched all over the forums and found multiple threads here and there, but the problem is I don't have original serial number, I've searched in the phone box and found nothing.. I cannot open bootloader nor flashing TWRP through SPFT works..
Any idea how I can retrieve build number back?

NVM, I fixed it. If anyone had this problem you can contact me.

Hello
hello I have the same problem can you help me

Ga1lan said:
NVM, I fixed it. If anyone had this problem you can contact me.
Click to expand...
Click to collapse
Hey!
same problem please help

Ericksebitas said:
hello I have the same problem can you help me
Click to expand...
Click to collapse
Qgmad said:
Hey!
same problem please help
Click to expand...
Click to collapse
ibb. * co/kBfGDNX
When you open the firmware folder there is another folder in it called extra files. In that there are 2 files named nvram and proinfo. You have to flash those files too.
ibb. * co/y0c5fJs
You have to change android scatter file in the main folder. Open android scatter file and search for nvram Just change file_name : nvram.bin and is_download : true as shown in the image. Then search for proinfo (proinfo.bin) and do the same. Then copy both nvram.bin and proinfo.bin to main folder While flashing, only uncheck preloader and flash everything as Download only .
ibb. * co/GCSXV5d
ibb. * co/VL0wJdk
P.S. : I was having a problem (error :2004). But it was solved after I updated my phone to android pie.
But after the flash my phone was not starting. It was just vibrating after every couple of seconds, and the same error kept showing up when I tried to flash the files again.
turns out that the problem was the Download-Agent. So I changed that and the flashing went perfectly.
Helped by Ga1lan