Related
i followed the instructions to the letter and after it was done
i was presented with a picture of an IC microchip and an arrow pointing down.
i restarted the phone and now it wont start.
i cant get into bootloader mode or recovery mode...
Please help me get my phone back!!!!
did you let it finish? the ic microchip and arrow pointing thing? or did you yank out the battery?
i panicked and yanked out the battery...i killed it, didnt i?
I think he didn't let the phone finish and restarted the phone cause it wasa taking too long if that's the case 99.0% the phone is bricked. It happend to somebody else here already. Jy
He just call tmobile and told them the wasn't turning on and they send him a replacement.
I think this is something that needs to be added to the flashing roominstructions.
slyfury said:
i panicked and yanked out the battery...i killed it, didnt i?
Click to expand...
Click to collapse
Im sorry man, you did the one thing you shouldnt have while flashing
Perrosky said:
I think he didn't let the phone finish and restarted the phone cause it wasa taking too long if that's the case 99.0% the phone is bricked. It happend to somebody else here already. Jy
He just call tmobile and told them the wasn't turning on and they send him a replacement.
I think this is something that needs to be added to the flashing roominstructions.
Click to expand...
Click to collapse
i agree 100% please add that to the instruction for noobs like me
oh well, i just hope i get a replacement quickly
that happened to me so i called t-mo and told them that my g1 wont turned on at all and tried the other battery so they send me a replacement. of course i was a noob back then. i learned my lesson in a hard way so i suffer a week without my precious g1 lol.
slyfury said:
i followed the instructions to the letter and after it was done
i was presented with a picture of an IC microchip and an arrow pointing down.
i restarted the phone and now it wont start.
i cant get into bootloader mode or recovery mode...
Please help me get my phone back!!!!
Click to expand...
Click to collapse
also once you called t-mo do not let them know that youre modifying your phone otherwise they will not send you another handset.
slyfury said:
i followed the instructions to the letter and after it was done
i was presented with a picture of an IC microchip and an arrow pointing down.
i restarted the phone and now it wont start.
i cant get into bootloader mode or recovery mode...
Please help me get my phone back!!!!
Click to expand...
Click to collapse
how about take out the sdcard and connect it to the computer, put the jfr33 in it, and flash your phone again. It works
also he could try getting into recovery mode using adb or sumthin...i am not too sure about it...but i think it can be done..!!!
tannyfiles said:
also he could try getting into recovery mode using adb or sumthin...i am not too sure about it...but i think it can be done..!!!
Click to expand...
Click to collapse
If the phone can't reach the bootloader or recovery console I don't think ADB is going to work but I could be wrong.
patience is a virtue
your topic title is misleading and could lead users who haven't tried yet to be too wary about flashing over to Haykuro's builds...
Ultimately...your phone didn't mess up after flashing 4.X..YOU messed up.
if you cant turn on youre g1 then it is dead, even if you connect it to pc or what if it cant be turned be on, it is dead cuz thats what happened to me so just call t-mo and tell them youre phone wont turn on and you tried another battery still wont turn and DO NOT tell them you modify or even saying you attemped to modify your g1's rom.
the best thing for him to do would be flash rc29 nbh and start from scratch...the phone is more than likely not bricked.
korndub said:
the best thing for him to do would be flash rc29 nbh and start from scratch...the phone is more than likely not bricked.
Click to expand...
Click to collapse
To my opinion, i do not think the phone is bricked since there is no hardware issue is involving, it's the software itself, if he can access to the root of the sd card, problem is solved.
but oh well, i would call Tmobile and request a new shinny phone . wait... they will send a refurbished one won't they? oh noo...
I have a similar problem, i was attempting to move apps to the sd card, partitioned it, installed the lucidrem rom and then started using his code and the flashing android loop started, turned it off and back on and still the flashing android, i used the fastboot method to restore my nandroid backup, and the phone is back to working, my problem is that i cant access recovery mode.
everything else is fine, just when i try to load the recovery mode it just stays on the boot screen, can anybody help a newbie out?
the bootloader works, and the phone can load normally, but the recovery mode wont start.
cueballv2 said:
I have a similar problem, i was attempting to move apps to the sd card, partitioned it, installed the lucidrem rom and then started using his code and the flashing android loop started, turned it off and back on and still the flashing android, i used the fastboot method to restore my nandroid backup, and the phone is back to working, my problem is that i cant access recovery mode.
everything else is fine, just when i try to load the recovery mode it just stays on the boot screen, can anybody help a newbie out?
the bootloader works, and the phone can load normally, but the recovery mode wont start.
Click to expand...
Click to collapse
That happened to me also. When I installed lucidrem's rom the recovery would work. What it actually was that when you first rooted your g1 do you rmr installing the recovery img? Well its pretty much the same thing lucidrems rom didn't have a recovery img command line attatched to it. I just installed recovery again from the terminal emulator just like it said in the root your g1 thread.
Atleast that is my side of the story. I don't anything about coding. So I could be wrong but that was just my experience.
bigballa said:
That happened to me also. When I installed lucidrem's rom the recovery would work. What it actually was that when you first rooted your g1 do you rmr installing the recovery img? Well its pretty much the same thing lucidrems rom didn't have a recovery img command line attatched to it. I just installed recovery again from the terminal emulator just like it said in the root your g1 thread.
Atleast that is my side of the story. I don't anything about coding. So I could be wrong but that was just my experience.
Click to expand...
Click to collapse
wow, thanks alot for your help, reflashed the recovery.img and it worked a treat, thought id bricked it good and proper, but your advice worked, thanks again.
I started this thread as a constructive and positive place for those of us that have recently lost our G1's or ADP's. I am going to document all my settings, Radio version, Firmware, Build info, etc here and hopefully reverse engineer this issue until I have an answer. If anyone has any hardware engineering information on this device it would be greatly appreciated. I'm even willing to host a private forum from my site to work on this.
Thanks everyone for your continued hard work and Haykuro, you're still the man!
-JFv1.43 RC9 firmware (just did this one update, not the radio update)
-1 GB micro SD which was deliverd with the phone
-Google's Developers Edition
-rooted
-sim ulocked
-almost fully loaded about 80 % battery
-everything went fine, the update went fine, restarting, and then no response and always and always the same android screen,
now im trying to crash it by low battery, not by just take the battery out, maybe this'll work (but I dont think so)
don't know anything else
Partioned Fat32/EXT2 1GB SDcard from t-mobile
Flashed RC29 via Bootloader .NBH file
Rooted with RC29
Updated to RC33
Flashed Hard SPL
Flashed JF v1.5 ADP Lucid MOD - did APPs2SD and Dalvik2SD
Flash 2.22.19.26I Radio
Flashed Grafitti Citrus Theme JFv1.50 Beta
Flashed H Special SPL with battery at 89% - saw it update, rebooted on its own, saw the chip with the arrow on it and it rebooted. once after that it hanged. I waited 5 minutes and then took the battery out. Got my sdcard reader, renamed the jf v1.5 to update to reflash like instructed. powered the phone with home+power and got nothing but a hang on t-mobile G1 screen.
Both phones were done the same. One phone bricked and one phone flashed the SPL.
I wonder if the Dream responds to goldcards like other HTC phones do...
That's how we fixed our Heralds, which is how the Elf's got their fix, etc.
ivanmmj said:
I wonder if the Dream responds to goldcards like other HTC phones do...
That's how we fixed our Heralds, which is how the Elf's got their fix, etc.
Click to expand...
Click to collapse
Goldcard as in a specialized SIM?
d474rpr said:
Goldcard as in a specialized SIM?
Click to expand...
Click to collapse
Goldcards as in a specialized SD card
d474rpr said:
Goldcard as in a specialized SIM?
Click to expand...
Click to collapse
You convert a SD card into a Goldcard and the phone will read it and allow the phone to flash ANY NBH file, regardless of CID, etc etc.
MosquitoD4K said:
-JFv1.43 RC9 firmware (just did this one update, not the radio update)
-1 GB micro SD which was deliverd with the phone
-Google's Developers Edition
-rooted
-sim ulocked
-almost fully loaded about 80 % battery
-everything went fine, the update went fine, restarting, and then no response and always and always the same android screen,
now im trying to crash it by low battery, not by just take the battery out, maybe this'll work (but I dont think so)
don't know anything else
Click to expand...
Click to collapse
This has happened to me many times when I didn't wipe (the PHONE ). Take the battery out, place back in and hold Home + Power to get into menu. Type alt + w to wipe, afterwards, alt + s to apply update.zip from sdcard, then Home+Back to restart. The first time loading, it can take up to ten minutes to get past the Android screen (mine took 7-10 minutes), so be patient.
Post back with any results.
ivanmmj said:
You convert a SD card into a Goldcard and the phone will read it and allow the phone to flash ANY NBH file, regardless of CID, etc etc.
Click to expand...
Click to collapse
that wont work i just read the write up. In order for the goldcard to work, the g1 has to go into fastboot, which none of our devices can go into fastboot nor recovery. I even formatted a sdcard to start the process but when i got to the fastboot i was so disappointed.
One detail, when i flashed the new spl I was doing something else and when i check my phone it back to recovery utility windows itself ,it was in 15 20 minute, after that i reinstalle jf1.5 and all worked ok
what this means. if you are flashing your phone and before these process finishes your take out you battery, you can bricking you phone. take patience and wait.
Good luck
ps:i change the final text for sir*mez
sir*mez said:
that wont work i just read the write up. In order for the goldcard to work, the g1 has to go into fastboot, which none of our devices can go into fastboot nor recovery. I even formatted a sdcard to start the process but when i got to the fastboot i was so disappointed.
Click to expand...
Click to collapse
satru said:
One detail, when i flashed the new spl I was doing something else and when i check my phone it back to recovery utility windows itself ,it was in 15 20 minute, after that i reinstalle jf1.5 and all worked ok
what this means. if you are flashing your phone and before these process finishes your take out you battery, you and only you bricking you phone. take patience and wait.
Good luck
Click to expand...
Click to collapse
this happened to the one that bricked.
Flashed H Special SPL with battery at 89% - saw it update, rebooted on its own, saw the chip with the arrow on it and it rebooted. once after that it hanged. I waited 5 minutes and then took the battery out. Got my sdcard reader, renamed the jf v1.5 to update to reflash like instructed. powered the phone with home+power and got nothing but a hang on t-mobile G1 screen.
Both phones were done the same. One phone bricked and one phone flashed the SPL. So yes I guess I bricked one phone but a miracle happened with the other one. the one that flashed properly went into the recovery on its own right after the boot, but not in no 15-20 min wait like you said. you sure need to stop the blaming. i am not blaming anyone for my bricked phone, im just trying to find a solution. you are going to get this locked because of the bickering.
hey sir*mes was no my intentions blaming to anyone , i only want to say that all need to give more time to flash before take out the battery. only that.
i will do something for you , i will change the text, happy?
Good luck
sir*mez said:
this happened to the one that bricked.
Flashed H Special SPL with battery at 89% - saw it update, rebooted on its own, saw the chip with the arrow on it and it rebooted. once after that it hanged. I waited 5 minutes and then took the battery out. Got my sdcard reader, renamed the jf v1.5 to update to reflash like instructed. powered the phone with home+power and got nothing but a hang on t-mobile G1 screen.
Both phones were done the same. One phone bricked and one phone flashed the SPL. So yes I guess I bricked one phone but a miracle happened with the other one. the one that flashed properly went into the recovery on its own right after the boot, but not in no 15-20 min wait like you said. you sure need to stop the blaming. i am not blaming anyone im just trying to find a solution. you are going to get this locked because of the bickering.
Click to expand...
Click to collapse
sir*mez said:
that wont work i just read the write up. In order for the goldcard to work, the g1 has to go into fastboot, which none of our devices can go into fastboot nor recovery. I even formatted a sdcard to start the process but when i got to the fastboot i was so disappointed.
Click to expand...
Click to collapse
So what harm would it do to try? From what I remember the goldcard on herald was supposed to get us into the bootloader even when we couldn't normally.
Let me be perfectly clear, those of us with the issue of a bricked device from loading the SPL from Haykuro are experiencing an actual case of being bricked.
Read carefully.
The phone WILL NOT turn on!!!!
We are looking for a solution that runs as far back as actually burning the SPL image directly to the phone's memory. I am even willing to try a hardware to hardware method to accomplish this.
I know the phone is still somewhat responsive because my laptop detects the USB connection to the phone but it will not recognize the device.. obviously because the communication is broken since the phone is dead. The power LED will turn on but only after I remove the battery first. Once I press the POWER key the LED turns off and will not light again until I remove and replace the battery.
Solutions that we are trying:
GoldCard method.
Looks like a couple of us have tried this but since fastboot can't see the device then we can't use this method unless someone knows something super seceret.
Crashing the device by allowing the battery to fully discharge. Unlikely but trying anyway.
Any other ideas?????
Thanks everyone for helping thus far!
neoobs said:
So what harm would it do to try? From what I remember the goldcard on herald was supposed to get us into the bootloader even when we couldn't normally.
Click to expand...
Click to collapse
I tried it and so far no luck...
neoobs said:
So what harm would it do to try? From what I remember the goldcard on herald was supposed to get us into the bootloader even when we couldn't normally.
Click to expand...
Click to collapse
ok but the phone wont go into bootloader. which is what im trying to get it to do. if i get it to bootloader i know i can fix it. even if it went to the recovery i could fix it. but I get nothing.
in order to create a goldcard for the dream it has to read the sdcard off fastboot which i cant get into.
d474rpr said:
Let me be perfectly clear, those of us with the issue of a bricked device from loading the SPL from Haykuro are experiencing an actual case of being bricked.
Read carefully.
The phone WILL NOT turn on!!!!
We are looking for a solution that runs as far back as actually burning the SPL image directly to the phone's memory. I am even willing to try a hardware to hardware method to accomplish this.
I know the phone is still somewhat responsive because my laptop detects the USB connection to the phone but it will not recognize the device.. obviously because the communication is broken since the phone is dead. The power LED will turn on but only after I remove the battery first. Once I press the POWER key the LED turns off and will not light again until I remove and replace the battery.
Solutions that we are trying:
GoldCard method.
Looks like a couple of us have tried this but since fastboot can't see the device then we can't use this method unless someone knows something super seceret.
Crashing the device by allowing the battery to fully discharge. Unlikely but trying anyway.
Any other ideas?????
Thanks everyone for helping thus far!
Click to expand...
Click to collapse
Are you saying your screen doesn't turn on?
neoobs said:
Are you saying your screen doesn't turn on?
Click to expand...
Click to collapse
No, I'm saying it doesn't turn on.
d474rpr said:
No, I'm saying it doesn't turn on.
Click to expand...
Click to collapse
The same happens on Heralds when the imgfs is messed up. To fix it, we force it to go into the bootloader mode and it does turn on. I wonder if it's something similar.
I meantioned in the big main topic an idea though I dont think anyone saw it.
In the past for other phones I was able to make recoveries using the computer while it was in the boot loop.
Anyone with the brick, try to see what happens when you do this:
adb remount
After the "T-Mobile G1" screen shows up. See if it says mount sucessful. I would try though it does not stay on the screen too long for me, not only that it might work for me just because it continues fine so its inconclusive.
If you get lucky and it says remount successful, you could try this:
adb shell recovery
I am not sure of the commands to follow from there, but it might allow you to flash a different update.zip file from the command line. If you get lucky like that, look up the commands and see how that might go. There has to be a way to communicate to the hardware when that screen comes up. Its good that that screen comes up, because it means its not 'fried' so to speak, it just has a misconfigured loader which doesnt have the correct set of instructions (good point about the different types of boards, thats most likely the issue) for THAT board. I would go back to the one that worked previously.
Hi everyone, i am using milestone A853 model, i follow exactly the guide to root the phone and everything goes perfect, i can boot up and use all the custom rom as usual. BUT the problem now i having is, it happened randomly sometimes i reboot my phone it just got into this bootloader err 1A,23,35,23,00 and i have to flash the GOT 2.2.1.sbf again and do a nandroid restore, i have to flash my phone around 4 times a week.
FYI, i tried the 3 button combination to get into open recovery but still it leads me to the bootloader err page.. is there anyway i can get rid of this?? i need to constantly be with a pc to get my phone working
[d]amour said:
Hi everyone, i am using milestone A853 model, i follow exactly the guide to root the phone and everything goes perfect, i can boot up and use all the custom rom as usual. BUT the problem now i having is, it happened randomly sometimes i reboot my phone it just got into this bootloader err 1A,23,35,23,00 and i have to flash the GOT 2.2.1.sbf again and do a nandroid backup, i have to flash my phone around 4 times a week.
FYI, i tried the 3 button combination to get into open recovery but still it leads me to the bootloader err page.. is there anyway i can get rid of this?? i need to constantly be with a pc to get my phone working
Click to expand...
Click to collapse
According to this thread, it might be an issue with a bad SD card.
http://www.android-hilfe.de/motorola-milestone/12635-milestone-startet-nicht-mehr.html
Can you try with another SD card?
Is it possibly that you have the older version of the Milestone bootloader? (90.73), you can try to flash the VR from kabaldan's website( http://android.doshaska.net/rootable) instead of G.O.T., you just need to put OR on your SD card yourself.
i am using the bootloader 90.78 and androidiani 3.3 open recovery...i try to format my sd card first see if it helps....i flashed my phone yesterday and using a fresh new iceandfire rom 3.0, i tried a couple of times rebooting and turn off my phone and it just boot up without any problem, however this morning i tried to reboot once more and i got this bootloader error again...frustrating =/
[d]amour said:
i am using the bootloader 90.78 and androidiani 3.3 open recovery...i try to format my sd card first see if it helps....i flashed my phone yesterday and using a fresh new iceandfire rom 3.0, i tried a couple of times rebooting and turn off my phone and it just boot up without any problem, however this morning i tried to reboot once more and i got this bootloader error again...frustrating =/
Click to expand...
Click to collapse
AOR dont updated recently, try FuFu openrecovery. it is based on AOR but have many new features and fix, like mmc fix, ext4 module, etc...
if your problem is beacuse the sdcard then you have the mmc error, what is fixed be kabaldan, and he provided a module for the fix, or you have a broken sdcard.
Changing the a different OR will help? i already apply the dsifix.ko 2.6 by kabaldan in my /system/lib/modules directory, just only did a nandroid restore to my phone now, will monitor how long it will last till the next bootloader err...sigh, btw is it ok if i keep trying to reboot like 5 times in an hour time?
[d]amour said:
Changing the a different OR will help? i already apply the dsifix.ko 2.6 by kabaldan in my /system/lib/modules directory, just only did a nandroid restore to my phone now, will monitor how long it will last till the next bootloader err...sigh, btw is it ok if i keep trying to reboot like 5 times in an hour time?
Click to expand...
Click to collapse
5 times seems a bit excessive to me. If all you are trying to do is see if you will boot into the bootloader when you really wanted the recovery, 2 times every hour or so should suffice.
wait a sec, you can enter the recovery console? try to not use the autoboot to or script. if the phone booted to the bootloader mode you can see a triangle, then push the camera and the volume up button to entering the basic recovery mode.
at this point the sdcard not used. then you can try to the update menu, now the phone trying to load the OR update.zip from the sdcard. if you have problem only with the last step, then your sdcard maybe broken, if you have the error at the first step, it is possible that your phone nand memory is failing. in that case you need to call the motorola customer service for the repair.
vadonka said:
wait a sec, you can enter the recovery console? try to not use the autoboot to or script. if the phone booted to the bootloader mode you can see a triangle, then push the camera and the volume up button to entering the basic recovery mode.
at this point the sdcard not used. then you can try to the update menu, now the phone trying to load the OR update.zip from the sdcard. if you have problem only with the last step, then your sdcard maybe broken, if you have the error at the first step, it is possible that your phone nand memory is failing. in that case you need to call the motorola customer service for the repair.
Click to expand...
Click to collapse
Recovery console? you mean the console mode after enter the androidiani menu?i can go straight into AOR with the camera + power button after turning it off.
whenever i got the bootloader error, i cant do anything though, the camera button with volume up is not working.All i can do is flash the .sbf file again.
But for now my phone is still working since the last nandroid restore i did this morning, reboot a few times normally and also reboot to recovery both are working as usual.
[d]amour said:
Recovery console? you mean the console mode after enter the androidiani menu?i can go straight into AOR with the camera + power button after turning it off.
whenever i got the bootloader error, i cant do anything though, the camera button with volume up is not working.All i can do is flash the .sbf file again.
But for now my phone is still working since the last nandroid restore i did this morning, reboot a few times normally and also reboot to recovery both are working as usual.
Click to expand...
Click to collapse
it is sadly, but it is possible that your phone nand memory unstable or have some crc error. do you often reflash before?
vadonka said:
it is sadly, but it is possible that your phone nand memory unstable or have some crc error. do you often reflash before?
Click to expand...
Click to collapse
i only started flashing few weeks ago but the bootloader error occur too frequently that i have to flash at least once every 2 days...for now i see that it lasted longer than usual,if it is really nand memory unstable means that there is nothing i can do to fix it?
[d]amour said:
i only started flashing few weeks ago but the bootloader error occur too frequently that i have to flash at least once every 2 days...for now i see that it lasted longer than usual,if it is really nand memory unstable means that there is nothing i can do to fix it?
Click to expand...
Click to collapse
you cant fix that, only the motorola service, but i suggest to try it some benchmark software like antutu benchmark. with that you can test the memory and see what happened.
well i guess the only solution will be not turning off my phone/reboot for as long as i could, don't wan to take risk later it gets into bootloader error again
My phone always stuck at bootloader when it's hot while booting up.
Wait few minutes or use a fan to cool it down will solve it.
When this happen, recovery mode won't start
and flashing new ROM won't help or even make problem worse because of extra heat produced.
Avoid rebooting after gaming/heavy use is my workaround.
imTigger said:
My phone always stuck at bootloader when it's hot while booting up.
Wait few minutes or use a fan to cool it down will solve it.
When this happen, recovery mode won't start
and flashing new ROM won't help or even make problem worse because of extra heat produced.
Avoid rebooting after gaming/heavy use is my workaround.
Click to expand...
Click to collapse
when u stuck in the bootloader it shows the error code like mine? or just the usual bootloader screen? i tried leaving the phone for few hours without doing anything but it still stuck at the bootloader screen with error code =/
I doubt this will help, but can you try flashing an official 2.2 sbf and try it for a few days? or maybe get an official 2.2 sbf, then root it, then install a rom.
hey there just to informed you guys here that my phone currently had no bootloader error so far for a week, i am using Froyo Mod 2.9.3 and everything just work well. Wonder what happen actually to my phone previously when i flash other rom.
Just wanna ask will the following step i did causes a bootloader error?
-Flash 2.2.1 got sbf files.
-Reboot to recovery (using the latest minimod), Click on root phone (i not sure will this cause the problem as this is suppose to be for stock rom?? plz correct me if am wrong)
-Wipe Dalvik,cache and data
-Apply update of custom rom and gapps.
-Reboot
Never like to have to resort to posting myself but I've had a decent look around the web and can't seem to find a solid solution to my problem so I'm hoping to get some specific help
So I have a UK MZ601 3G Motorola Xoom which was happily running Moray 2.2.1 and had been rooted using the universal root method. Decided to update to 2.2.2 and now my Xoom is stuck in a boot-loop on the custom rippling water boot animation.
The tablet hangs on the first line when trying to boot into recovery so for all my efforts cannot access CWM and perform a hard reset and fresh rom install.
I've tried - and I'm assuming I'm correct in thinking this means I cannot get the Xoom to any stage where I can use adb to attempt to get in to recovery or push files to the system etc. this way.
From what I've read on other forum posts - booting holding volume up and power puts the device into an 'RSD' state which is another method of reflashing the device? I've read this requires an 'SBF' file - which I have seen for download - but believe it only works for the US models?
I've left the boot screen looping overnight - so its not an issue of it just being slow. Because of the custom boot screen I obviously can't return it to the shop as I presume its an obvious warranty void?
Would massively appreciate any help in bringing whats looking increasingly like a £500 paper weight back to life.
Thanks
crozuk said:
Never like to have to resort to posting myself but I've had a decent look around the web and can't seem to find a solid solution to my problem so I'm hoping to get some specific help
So I have a UK MZ601 3G Motorola Xoom which was happily running Moray 2.2.1 and had been rooted using the universal root method. Decided to update to 2.2.2 and now my Xoom is stuck in a boot-loop on the custom rippling water boot animation.
The tablet hangs on the first line when trying to boot into recovery so for all my efforts cannot access CWM and perform a hard reset and fresh rom install.
I've tried - and I'm assuming I'm correct in thinking this means I cannot get the Xoom to any stage where I can use adb to attempt to get in to recovery or push files to the system etc. this way.
From what I've read on other forum posts - booting holding volume up and power puts the device into an 'RSD' state which is another method of reflashing the device? I've read this requires an 'SBF' file - which I have seen for download - but believe it only works for the US models?
I've left the boot screen looping overnight - so its not an issue of it just being slow. Because of the custom boot screen I obviously can't return it to the shop as I presume its an obvious warranty void?
Would massively appreciate any help in bringing whats looking increasingly like a £500 paper weight back to life.
Thanks
Click to expand...
Click to collapse
When you press volume up and power, and hold it, it reboots, yeah? Then you wait about three seconds on dual core screen and tap volume down...what happens then? Do you see android recovery in upper left? Or starting fastboot protocol? Where does it hang? Just trying to see where things are going wrong. If you can get into starting fastboot protocol you are in good shape. If you can get into cwm recovery you should be in great shape. Check out the Xoom Heaven thread in General for some info on recovery.
You are most likely far from bricked...almost all of us have recovered from worse situations than you are in now so just keep cool.
okantomi said:
When you press volume up and power, and hold it, it reboots, yeah? Then you wait about three seconds on dual core screen and tap volume down...what happens then? Do you see android recovery in upper left? Or starting fastboot protocol? Where does it hang? Just trying to see where things are going wrong. If you can get into starting fastboot protocol you are in good shape. If you can get into cwm recovery you should be in great shape. Check out the Xoom Heaven thread in General for some info on recovery.
You are most likely far from bricked...almost all of us have recovered from worse situations than you are in now so just keep cool.
Click to expand...
Click to collapse
Thanks for your reply - tried numerous times getting into recovery - get stuck with one line of 'starting fastboot protocol' and seems to hang there.
Have experience rooting and flash etc. and have obviously used adb in the past.
If I could just get to recovery - or a state where I could use adb I would be fine. But as I said in my first post - looks like I can only access an 'RSD' state.
Is there any other way of getting adb access from my PC? All the help for bricked xooms seems to concern US models - and don't want to try anything that will completely write it off!
Thanks again for your help.
Quick update -
Have retried Fastboot - stuck on 'Starting Fastboot protocol support'
Tried Android Recovery - got stuck on a black screen for a long long time but finally booted!
Wiped and re-installed what I know to be a kosher ROM! Was a scary moment there but thanks for your help and reassurance!
crozuk said:
Quick update -
Have retried Fastboot - stuck on 'Starting Fastboot protocol support'
Tried Android Recovery - got stuck on a black screen for a long long time but finally booted!
Wiped and re-installed what I know to be a kosher ROM! Was a scary moment there but thanks for your help and reassurance!
Click to expand...
Click to collapse
If you are still rooted and all, just for safety's sake, make sure to do another nandroid backup and save it to your micro sdcard. Backup, backup, backup. Then also make sure that you have a compatible cwm recovery installed, that will let you access your microsd card. It sounds like you're alright, so, cool.
Hi all, I just ordered a Chinese B63M phone at cect-shop.
Nice phone with great specs.
I alreadu know how to root it, but are there already custom Roms available?
Could'nt find a lot of info, just a Russion version.
B63M... thats my phone
Henkdrenth said:
Hi all, I just ordered a Chinese B63M phone at cect-shop.
Nice phone with great specs.
I alreadu know how to root it, but are there already custom Roms available?
Could'nt find a lot of info, just a Russion version.
Click to expand...
Click to collapse
Now that makes us 2 people who owns a B63M and got it from cect-shop.
What I find out about their phones is that it may not easily allow you to perform some insider operations, for instance, maybe its me but I could not find any custom recovery installed and this led to my first issue after I rooted, and installed the ROM manager, I saw the 'fix permission' and clicked it hoping to resolve my force close issues and it asked me to reboot after performing the process but it never got out of the boot, the loop continued, trying to boot into recovery become impossible but somehow a combination got me into a mode where I was able to clear flash and this took me back to a pre factory flash good thing I backed up titanium so I cld restore my apps and upgrade.
Right now I have tried to flash and the screen has gone blank yet the phone is responding to touch as I can hear sounds when the screen is clicked, indicating that its not bricked I just cant see anything going on (this is my current situation and seriously looking for help).
Lastly, I am trying to find out the htc equivalent to this b63m, it looks htc but I cant be sure which of the htc has been more or less cloned... this is going to help with a lot of things if known.
Cheers
Hi there,
If you are looking for a custom recovery, try this forum, altough you have to translate it because it is in German.
Lots of people there with our phone end they know how to get a custom recovery on it.
Cect is German
Henkdrenth said:
Hi there,
If you are looking for a custom recovery, try this forum, altough you have to translate it because it is in German.
Lots of people there with our phone end they know how to get a custom recovery on it.
Click to expand...
Click to collapse
Yeah thanks, I have also stumbled on the site forum before but I cld not get something out of it, maybe I have not taken time enough to search, I am back on it now and hope I get a solution to the blacked out screen problems I have after flashing.
You know cect-shop is German, they are a German company in China... I am talking to them on skype and hoping they can help me out but they seem pretty busy or cant be bothered because their response is so much delayed or even not at all.
Well technoforum has a special B63M section with all tools required.
They also have nice custom roms like a Cyanogen fork.
I also don't speak Italian, but with the help of Google translate I'm getting pretty far.
But I do let Google translate from Italian to English, that gives me the best result.
Good luck!!
Do you also get no working screen after a reboot with both volume + and power button?
That should get you to the recovery screen without any ROM drivers.
Very correct, no screen even in recovery
When I do the button combination, I believe that it may have responded to my combination for recovery mode but I just cant see anything on the screen, it just remains the same way it was... maybe it graphics issue, as in is the graphics is messed up for some reason or resolution issue, you wont see anything being displayed.
I am just guessing here but all I did was to simply flash an update.zip from sd card.
That is very strange, since flashing a rom does not affect the screen of the recovery boot.
The rom video driver gets only active during the boot process of the rom.
In the past I had some boot problems with my Wildfire start-up that I solved by removing the SIM card and SD card, removed the battery for some minutes and them booted completely resetted.
You could try that, if that does not solve the problem, the only way to wipe the phone back to factory-reset is doing it blind.
After I get my phone I could make a step-by-step guide so you could get to the reset menu...
Another possibility is to re-flash a fresh recovery img to the phone. Since I don't know what was in your update.zip, you could messed up the recovery menue, or even the bootloader.
Re-flashing those could also help and you don. t need the display from the phone, since you use the PC for that.
Here it is
Here is the update.zip I flashed. http://chinamobiles.org/downloads.php?do=file&id=618&langid=4
I am a bit surprised myself that the screen is blanked out but the phone seem to be working still.
I have removed both SIMS and SD card plus battery several times etc. nothing changed.
You said ''After I get my phone I could make a step-by-step guide so you could get to the reset menu...'', I hope you get your phone soon tho, and i can see the step-by-step guide you made.
I have actually flashed recovery into it using flash tool, ODIN dont seem to see the phone (at least the yellow box saying COm4 or 5 is not showing), I can see the phone using adb but when I say adb reboot download or recovery, something happens but I cant see what it is.
I too have a B63M...!!! Spice Mi-350n...........
If you need a moded recovery, i can port it for you........but you need to follow some instructions...i'll give them tomorrow!!
Waiting on you... I hope my blank screen gets sorted.
balamu96m said:
I too have a B63M...!!! Spice Mi-350n...........
If you need a moded recovery, i can port it for you........but you need to follow some instructions...i'll give them tomorrow!!
Click to expand...
Click to collapse
Ahh thanks man... Ii will wait to hear from you tomorrow, I aim in UK and depending on what time zones you are in but I hope to find you online to connect again.
I hope you have understood my particular issue here tho, the screen if blank even tho the fone seem to be alive and it follows the boot sequence, I can even find it using 'adb devices' command, it just the screen gone blank.
Someone suggested it may be the boot.img but I dont know about that.
Cheers
I'm from India - Local time here is GMT+5:30......!!
So, here you go !!
B63M= MTK6573 + 650mhz + Android 2.3
So, one modded recovery.img can't be used for every B63M.......this is because a different B63M phone will have a different recovery.img..........(hope u understand)
Backing up everything:
1) ROOT is necessary. It is recommended to put the phone in 'Airplane mode' so that it won't disturb the process and make sure you have ~500 mb space in SD card.
2) Download 'BackUpTools.rar' from HERE and extract it to your SD Card. You'll have 2 folders - 'gscript' and 'Install'.
3) Install 'GScriptLite.apk' from gscript folder.
3) After installation, open the 'GScriptLite' application -> Menu -> Add Script.
4) Tick 'Needs SU ?'
5) Click 'Load File' and select 'Back23.sh' and then select 'save'
6) Now Click on 'Back 23' and Super User will ask for Permission and allow it. Nothing more to touch. Wait for few minutes. After few mins, it will say 'Auto Close is Cancelled'. Now its safe to close.
7) Your Back-Up will be in 'backup_' folder located in your SD card's root.
It will have files named ' firmware.info, preloader.img, nvram.img, seccnfg.img, uboot.img, boot.img, recovery.img, secstatic. img, misc.img, logo.img, expdb.img, cache.img, system.img, data.img' in that folder. Copy it to your computer and keep it at a safe place. More Over if you are posting in the forums or sharing it online, don't include ' data.img, cache.img and nvram.img' as they contain your personal information.
Here i need two files.One is recovery.img and the other is firmware.info.
If you give both, i can port one for your phone !! Also mention your phone's model name/number because, without that it is not possible.
xdadeem said:
Here is the update.zip I flashed. http://chinamobiles.org/downloads.php?do=file&id=618&langid=4
HTML:
I am a bit surprised myself that the screen is blanked out but the phone seem to be working still.
I have removed both SIMS and SD card plus battery several times etc. nothing changed.
You said ''After I get my phone I could make a step-by-step guide so you could get to the reset menu...'', I hope you get your phone soon tho, and i can see the step-by-step guide you made.
I have actually flashed recovery into it using flash tool, ODIN dont seem to see the phone (at least the yellow box saying COm4 or 5 is not showing), I can see the phone using adb but when I say adb reboot download or recovery, something happens but I cant see what it is.
Click to expand...
Click to collapse
That was the problem, you flashed only the update, not a complete Rom.
I suggest you make a complete re-flash vorm scratch, so refash a fresh recovery.img and re-flash als a new Rom.
You can vind one at technoforum' as earlier mentioned
I thot you shd read my latest.
Ok guys I appreciate this a lot.
Here at this point I think you shd hear my developments before taking any further actions or suggestions.
aha thanks, I did just that and it worked although it is still blank at the beginning of boot but later something shows up on screen and completes boots.
Remember I mentioned that someone suggested it might be a boot.img problem... well, I used flashtool to flash a boot image and I can say it worked, I now have the visuals, even tho the screen is still blank at boot start but soon after it picks up and its working, now I have the phone again.
so @balamu96m, my issue was basically the screen, without seeing anything I cannot follow the back up suggestion you gave me here, but now I can see it again.
A couple of additional issues tho...
1- I checked the kernel and it has changed from 2.3.5 into 2.3.4 and >In the current ROM flash I have lost a couple of capabilities like Flashlight, camera etc
2- I followed this link http://www.technoforum.it/forum/viewtopic.php?f=73&t=3351 to flash recovery and it says Successful with the green Circle -OK-... but I still cant get boot into recovery either when I use the keys combi or when I try to boot into recovery in mobileuncle tools, it just goes blank and stays like so until I have to remove the battery and restart boot normally.
3- From the same link above they have the Golight ROM in part 2 after recovery in part 1, I am assuming this a good ROM to flash and the things I lost will get back, but I still cant boot into recovery.
Coming back to the response from balamu96m... Should I still go ahead with what yu suggested and provide you the files details you want? both recovery.img and firmware.info... I am asking because I no longer have the original ROM that came with the phone and like I said I cant even get into Recovery after I tried flashing a new recovery.img, this one from the same link above (see the recovery.img inside the 'Recovery Moddata' file from the 'UPDATEB63MRecovery2012' download file.)
Great to hear that you have visual again!
You still have root yes?
The golight rom from technoforum is a good one.
I expect mine any moment now so I can customize mine too.
Good luck!
xdadeem said:
Ok guys I appreciate this a lot.
Here at this point I think you shd hear my developments before taking any further actions or suggestions.
aha thanks, I did just that and it worked although it is still blank at the beginning of boot but later something shows up on screen and completes boots.
Remember I mentioned that someone suggested it might be a boot.img problem... well, I used flashtool to flash a boot image and I can say it worked, I now have the visuals, even tho the screen is still blank at boot start but soon after it picks up and its working, now I have the phone again.
so @balamu96m, my issue was basically the screen, without seeing anything I cannot follow the back up suggestion you gave me here, but now I can see it again.
A couple of additional issues tho...
1- I checked the kernel and it has changed from 2.3.5 into 2.3.4 and >In the current ROM flash I have lost a couple of capabilities like Flashlight, camera etc
2- I followed this link http://www.technoforum.it/forum/viewtopic.php?f=73&t=3351 to flash recovery and it says Successful with the green Circle -OK-... but I still cant get boot into recovery either when I use the keys combi or when I try to boot into recovery in mobileuncle tools, it just goes blank and stays like so until I have to remove the battery and restart boot normally.
3- From the same link above they have the Golight ROM in part 2 after recovery in part 1, I am assuming this a good ROM to flash and the things I lost will get back, but I still cant boot into recovery.
Coming back to the response from balamu96m... Should I still go ahead with what yu suggested and provide you the files details you want? both recovery.img and firmware.info... I am asking because I no longer have the original ROM that came with the phone and like I said I cant even get into Recovery after I tried flashing a new recovery.img, this one from the same link above (see the recovery.img inside the 'Recovery Moddata' file from the 'UPDATEB63MRecovery2012' download file.)
Click to expand...
Click to collapse
You flashed a recovery, but that is not working ah?? Oh God!!
Why did you do that bro??
Do you have any backup of the stock one??
If you dont have, then i have 2 ideas....one idea is to flash something else such that your fone won't boot....now you can send your phone back to the manufacturer and ask them to reflash everything!!!
The other idea, i'll tell you after sometime!!
It was always so
balamu96m said:
You flashed a recovery, but that is not working ah?? Oh God!!
Why did you do that bro??
Do you have any backup of the stock one??
If you dont have, then i have 2 ideas....one idea is to flash something else such that your fone won't boot....now you can send your phone back to the manufacturer and ask them to reflash everything!!!
The other idea, i'll tell you after sometime!!
Click to expand...
Click to collapse
The reason i flashed recovery initially was that my phone went into a boot loop and I was unable to get into recovery, after a while somehow i figure it out and cleared flash and then restored my phone apps and co and got on fine.
But if I could not get into recovery it means that there was not stock recovery on my phone or it got missing somehow. This I have to ask Henkdrenth since he is getting the same phone from the same shop too, but there was no recovery in my B63m, I already heard there is a recovery problem with the phone anyway, and thats why I flashed recovery and it worked but then I flashed ROM and the screen went blank, which is what got me to this forum.
I did not just go and flash recovery, it because there was none on the phone in my opinion.
xdadeem said:
The reason i flashed recovery initially was that my phone went into a boot loop and I was unable to get into recovery, after a while somehow i figure it out and cleared flash and then restored my phone apps and co and got on fine.
But if I could not get into recovery it means that there was not stock recovery on my phone or it got missing somehow. This I have to ask Henkdrenth since he is getting the same phone from the same shop too, but there was no recovery in my B63m, I already heard there is a recovery problem with the phone anyway, and thats why I flashed recovery and it worked but then I flashed ROM and the screen went blank, which is what got me to this forum.
I did not just go and flash recovery, it because there was none on the phone in my opinion.
Click to expand...
Click to collapse
Now, is the recovery working??
Does the phone boot properly??
Wrong section. Moving to general.
YES and NO
balamu96m said:
Now, is the recovery working??
Does the phone boot properly??
Click to expand...
Click to collapse
After many troubles, I found a mod for w690 which is the build version of my phone, I could not boot to recovery so used flashtool and when I load the scatter text of the one I found, it automatically load in every item on the list including recovery and boot img , etc, so I flashed these to my phone... and for the first time I was back in how the phone came to me,
Gingerbread has now returned to 2.3.5.
One thing I have noticed is that the phone freezes on me and then reboots?
I still cannot boot into recovery, I tried this again using mobileuncle tools...
It seem that I have flashed my phone which is good, but I was unable to wipe cache because I could not boot into recovery to do this which may be the source of the current freeze and reboot.
Can I solve this using the mobileuncle or what can I do to wipe cache, if that is the problem
Well, received mine, rooted it an flashed a new recovery from technoforum using myuncletools.
All went well, so I suggest you do also a fres re-flash with a proper recovery.
Hope that should solve your problem.
Edit: moved from my tablet to my PC to look for the link of a correct recoveryfile for you.
First, load this recovery.
Unpack it and put the content to the root of your SD card.
Use myuncletools to flash this recovery.
Now you should have a usable custom recovery that allows you to factory-reset and wipe your phone
Install a fresh rom
How to? Look here