http://zenthought.org/content/project/flashrec
Tool to flash the recovery image on Android phones. The so-called “one click root”.
No longer includes CyanogenMod Recovery 1.4 , but will download the correct CyanogenMod Recovery 1.4 for your phone.
Allows flashing any image (type the path or url to it).
Works on “32B” and “32A” phones.
Uses CVE-2009-2692 , which is patched in firmwares released after August 2009.
Also allows you to back up and restore the current image (to /sdcard/recovery-backup.img)
NOTE: I just found this update and have nothing to do with the actual project - though I am grateful for the work and would like to share the info!
Bluetooth access is only used to create a socket for exploiting the bug – Bluetooth does not need to be enabled, as it is not really used.
Pre-compiled: flashrec-1.1-20090904.apk (Allow non-market apps on phone to install)
Source: flashrec-1.1-20090904.tar.gz
SVN: flashrec on Google Code
Note: I am not involved in this project, just sharing the hard work of someone else.
Note: I'm just sharing the work of the XDA Member
majdinj
Here's a brief introduction :
Originally Posted by majdinj
ADB Screen Shot (OS & Recovery)
What does this tool do?
Simply, it takes screen shot through adb
shell action and pull the resulted image
file directly to your computer, then it
removes all traces from android device.
From which android screen this tool is capable
to take picture from?
From both android OS and Recovery
mode.
What are the basic binaries used in this tool?
- The built in screencap binary for taking
screen shots from Android OS.
- fb2png binary for taking screen shots
from Android Recovery mode. This binary
is developed by Kyan.ql (You can visit the
project page from here).
How can I use this tool?
It is simple:
1) Make sure you have turned on your
device USB debugging mode.
2) Connect your device to your computer
by USB cable.
3) Run the tool by clicking on
ScreenCap.bat
4) After taking screen shot, it will be
saved in ScreenCapture folder.
Credits:
- Google for ADB engine.
- Kyan.ql for fb2png
Original Thread and download from : http://forum.xda-
developers.com/show....php?t=2433256
Credits : majdinj :thumbup:
Introduction
If you get your hands on a device with Cyanogen OS preinstalled and there is no factory image for it published by Cyanogen Inc. yet, then this script is for you. It constructs download links of factory image from a device running Cyanogen OS.
There are different files for a factory image: signed fastboot flashable zip, signed zip & boot-debuggable image.
Signed fastboot flashable zip: It contains the complete rom and can overwrite everything including your data partition. These cannot be flashed via recovery - extract their contents and flash via fastboot. An unlocked bootloader is required.
Signed zip: Normal recovery-flashable zip that contains just the system and kernel (they won't overwrite your data partition).
Boot-debuggable image: It is boot image/kernel that enables adb root and the developer menu options.
Requirements
1. Windows Vista or newer. 2000/XP should also work if choice.exe is present. Linux & OSX users should check the Python port.
2. Properly installed adb driver; see here.
3. Properly configured adb_usb.ini (optional); see here.
4. A device with regular Cyanogen OS (testing versions aren't supported) installed; list is here.
Download
https://github.com/Titokhan/cosfid
Usage
Download all of the files using "Download ZIP" option, extract somewhere (path with no space is recommended), connect the target device using USB cable & execute COSFID.cmd.
COSFID.py is intended for Linux & OSX users, though Windows users can run it too if Python for Windows is installed. The Python port is a quick-and-dirty one; it needs more refinement.
Don't confuse it by Cyanogen OS OTA trackers like the original one; read carefully to spot the difference.
Credit
1. qewlpal for inspirations in scripting
2. Jernej Simončič for providing Windows builds of GNU wget
3. Google for providing adb binaries under Apache license
4. Cyanogen for making Android more beautiful
Reserved for future.
Great job!
There is a way to get all ROM links for a specific model?
@bartito
Technically yes, but Cyanogen has made the tracking a little bit complicated now for 3rd parties. We also need to develop a database for historic data.
Titokhan said:
@bartito
Technically yes, but Cyanogen has made the tracking a little bit complicated now for 3rd parties. We also need to develop a database for historic data.
Click to expand...
Click to collapse
I'm refer to a way to locate new uploads.
Really not much interest on history but in the future
AOSP 4.4.4 ROM baked with DEXHUNTER built in.
More info for dexhunter can be found here:
https://github.com/zyq8709/DexHunter
https://github.com/zyq8709/DexHunter/blob/master/slide.pptx
Credits to the DEXHUNTER team that put this together.
Usage:
If you want to unpack an app, you need to push the "dexname" file to "/data/" in the mobile before starting the app. The first line in "dexname" is the feature string (referring to "slide.pptx"). The second line is the data path of the target app (e.g. "/data/data/com.test.test/"). Its line ending should be in the style of Unix/Linux. You can observe the log using "logcat" to determine whether the unpacking procedure is finished. Once done, the generated "whole.dex" file is the wanted result which is located in the app's data directory.
Github Project Page Has more information.
String List:
360: /data/data/XXX/.jiagu/classes.dex
Ali: /data/data/XXX/files/libmobisecy1.zip
Baidu: /data/data/XXX/.1/classes.jar
Bangcle/Secneo: /data/data/XXX/.cache/classes.jar
Tencent: /data/app/XXX-1.apk (/data/app/XXX-2.apk)
ijiami: /data/data/XXX/cache/.
Notes:
This ROM is not rooted and has no modifications other than the DEXHUNTER integration(reason is some apps will detect root). If you have a custom recovery you can apply root easily via flash file. This ROM is built to analyze/dump dex data of packages that use heavy anti debugging, dex manipulation and dynamically loaded methods and classes . If you don't understand this, this ROM is probably not for you. Please deffer to the power point slides for more information.
This ROM has only been tested with Nexus Grouper. It May brick other devices.
Tested via Flashing with TeamWin recovery.
DOWNLOAD FILE:
https://www.dropbox.com/s/y7tixw8rfvx6b0v/DEXHUNTER-aosp_grouper-ota-eng.zip?dl=0
Download link does not work please fix
Could you please reupload?
Please reupload this. I really need this to analyze chinese spyware app
instantnoodle-tools-cli-mainHey all!
I've started this project to allow people to use their devices longer, right now with a focus on the OnePlus 8, but eventually spreading to more devices. These scripts are currently for Linux Ubuntu/Debian distros only, but I plan on expanding support to other systems as well. Below is a link to all the files you will need to start using the scripts for beta testing on Linux machines. The only three ROMs available at the moment are Lineage OS 18.1 (with or without Google), ShapeShift OS v2.6, and Pixel Experience, but, again, more ROMs will be supported. I also plan to include troubleshooting support for frequent issues that can be fixed.
GitHub - kyg203/Android-Tools-CLI-
Contribute to kyg203/Android-Tools-CLI- development by creating an account on GitHub.
github.com
setup.sh - this script installs all of the tools and software for the next scripts to use for flashing. Please initiate this script first time and every week or so to keep tools up-to-date and fresh.
autotools.sh - This is the main script you will be executing. The rest will be executed from here. Do not execute any others manually to ensure you don't break anything.
rom-installer.sh - ROM chooser script. downloads the ROM of your choice and extracts the fastboot images from the payload.bin file. Do not execute from here.
In each ROM folder, there will be an info "readme" file. These files basically serve as a directory listing, allowing you to find the project page on XDA/GitHub/Website, look at any known bugs before you flash, and see any special install instructions. Please check these files regularly!
I will be focusing on perfecting the process on the command line on Ubuntu and Debian based distros first before I begin supporting more distros and operating systems. feel free to leave comments about the project below and begin porting your device into the project!
<---------- WARNING ---------->
// THIS IS STRICTLY IN ALPHA TESTING
// USE AT YOUR OWN RISK AND ALWAYS BACKUP YOUR DATA
<---------- WARNING ---------->
<---------- REQUIREMENTS ---------->
YOUR DEVICE MUST BE BOOTLOADER UNLOCKED
PUT THIS FOLDER IN ROOT (~) aka Home
PATIENCE - This project is still in the process of setting up and may produce errors. Feel free to contact me or anyone on XDA to help you with any issues or answer your questions.
BACKUP YOUR DATA - Backup all of your data even before you unlock your bootlaoder, because as soon as it is unlocked the device is wiped. Be prepared and you have been warned.
<-------------- RECOMMENDATIONS ------------>
I highly recommend you root your phone and leave Lineage Recovery or Pixel Experience Recovery on the device. This generally makes troubleshooting faster and easier. Plus, it allows you to backup your persist.img in the chances it does get corrupted. I will be adding a tool to backup and restore this image for you.
If enough support comes through, I will make a Telegram and Discord for this project specifically for support.
This is a really exciting concept and thank you very much for your efforts thus far.
UPDATE [2020-06-03]
- Added a new folder hierarchy to organize the mess a bit
- The entire project does not create anymore folders inside or outside of the branch
- Trying to leave a small footprint, so deletes all .img's, .bin's, and any other files immediately after usage.
- Updated README (and above)
- Brought support for ShapeShift OS (v2.6 Sceptile)
- Trying out an info file in each ROM folder to highlight features, issues, support, and information. Still working on gathering more information.
Hope everyone is doing well! If anyone has tried it out yet, even an older version, did it work for you and how was the overall process?
Can this be already used or not yet ?
dan20063 said:
Can this be already used or not yet ?
Click to expand...
Click to collapse
Yep! Only works on Ubuntu based systems.
Download the folder, execute setup.sh (as sudo) and then execute autotools.sh (as sudo).
You're "average Linux user" (ik basically a meme at this point) will have no issue installing a ROM manually instead, and would most likely prefer the control and ease of mind of the manual way. Especially because they still need to download and get an understanding of ADB/Fastboot and its commands since that's necessary for unlocking the bootloader.
With that being said I'm glad you made this, looking forward to further development, and I'm downloading now to test and for S&G.
Yeah, that's true. I just wanted to get it going and working on Linux where I'm a bit more comfortable and then switch it to Windows once I have a Windows device. I definitely added a bootloader unlock, but that obviously only works for unlocked devices
Nice work!
Thanks for your time, effort and sharing.
Just updated the autotools project!
What's new?
-- Updated all the available custom ROMs and custom recoveries
-- Shorted a couple of scripts to reduce folder size
-- New backup_persist.sh script - self explanatory. Everytime you run this script, it erases the previous backup, so be careful about executing this one!
-- New restore_persist.sh script - self explanatory - Uses the last made backup of your persist.img!
If you want multiple backups of the persist, maybe for different versions of Android, you will need to go in and rename those files separately. To do this from the terminal, just type "mv persist.img new-name-of-file-here.img" or you can rename the file from your local file manager.
Just a reminder: this project is open source! Please port it to support your own device! I'll be finishing up the OnePlus 8 by this weekend and then working towards my Pixel 6 when it comes in by Christmas.