Hey fellas! Does anyone know the SAMSUNG GALAXY SIII SCH-R530M 16 digit password??
I ve been surfing the web but havent found it,any help will be appreciated..cheers!
Edited: thanks to [email protected] for posting this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2FF811282FF9F323
Hello everyone. I too have been looking for this password. Has anyone had any luck finding it?
mrctony said:
Hey fellas! Does anyone know the SAMSUNG GALAXY SIII SCH-R530M 16 digit password??
I ve been surfing the web but havent found it,any help will be appreciated..cheers!
Click to expand...
Click to collapse
Hi,
I'm working at creating a solution for JTAG repair on the SGS III USC model and I'm in need of a SCH-R530M SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance!
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096
tomy1986.nt said:
Hi,
I'm working at creating a solution for JTAG repair on the SGS III USC model and I'm in need of a SCH-R530M SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance!
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096
Click to expand...
Click to collapse
hope this helps.
Jonny Wad said:
hope this helps.
Click to expand...
Click to collapse
Thanks very much for your help.
:good:
2ff811282ff9f323
funkym0nk3y said:
2ff811282ff9f323
Click to expand...
Click to collapse
Thank you. I'll give this a go and report back asap.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Thank you funkym0nk3y. Worked perfectly.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Related
Hi there,
I'm working at creating a solution for JTAG repair on the SGS III USC model and I'm in need of a SCH-R530 SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance!
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096
Request fulfilled thanks a lot!
SGS 3 USC Files
If anyone has these files I would also greatly appreciate if you can forward the to me.
I have the wires soldered and ready to flash but this specific SGS 3 from USC is not supported. Thank in advance.
dead r530
coronelac said:
If anyone has these files I would also greatly appreciate if you can forward the to me.
I have the wires soldered and ready to flash but this specific SGS 3 from USC is not supported. Thank in advance.
Click to expand...
Click to collapse
i have also a hard bricked r530 its only detect in pc as a quallcom com port plz share how to unbrick it
bro are you able to revive it from the qualcomm com port? or jtag?
Hi there,
I'm working at creating a solution for JTAG repair on the SGS III USC model and I'm in need of a SCH-R530M SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance!
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096
Hi there,
I'm working at creating a solution for JTAG repair on the SGS III USC model and I'm in need of a SCH-R530M SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance!
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096
my mate 7 tl10 partions gone after bad flashing
wee need partions from another tl10 via adb backup with dd command : details of command here:
adb shell
su
dd if=/dev/block/mmcblk0 of=/sdcard/Dump_1GB.bin bs=1024 count=1024000
dd if=/dev/block/mmcblk0 of=/sdcard/Dump_512mb.bin bs=1024 count=524288
dd if=/dev/block/mmcblk0 of=/sdcard/Dump_2GB.bin bs=1024 count=2048000
and another command if give u any results send me dd backups:
adb shell
su
dd if=/dev/block/mmcblk0boot0 of=/sdcard/Boot0.bin bs=1024 count=4096
dd if=/dev/block/mmcblk0boot1 of=/sdcard/Boot1.bin bs=1024 count=4096
at the final procedures use this commands:
adb shell
su
cat /proc/partitions
Hi every one!
I have idea downgrade Fire TV OS via hardware (eMMC)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My Fire TV Gen 2 running on Fire TV OS version 5.2.6.1. it can't root. i desolder eMMC and connect to Linux PC use Transcend USB 3.0 with SD Card Adaptor
Now i can see all partition layout via command :
- to see partition :
Code:
[COLOR="red"] - need on first time and enter your password[/COLOR]
sudo su
fdisk /dev/sda
enter "x" then enter "p"
or open Gparted to see
- to export and backup partition layout:
Code:
fdisk /dev/sda
Enter "O"
Enter name
Enter "q" to quit
Now i can dump all partition use command :
Code:
dd if=/dev/sda1 of=/home/duong/Desktop/dump/1PRO_INFO.bin
dd if=/dev/sda2 of=/home/duong/Desktop/dump/2NVRAM.bin
dd if=/dev/sda3 of=/home/duong/Desktop/dump/3TEE1.bin
dd if=/dev/sda4 of=/home/duong/Desktop/dump/4TEE2.bin
dd if=/dev/sda5 of=/home/duong/Desktop/dump/5lk.bin
dd if=/dev/sda6 of=/home/duong/Desktop/dump/6boot.img
dd if=/dev/sda7 of=/home/duong/Desktop/dump/7recovery.img
dd if=/dev/sda8 of=/home/duong/Desktop/dump/8KB.bin
dd if=/dev/sda9 of=/home/duong/Desktop/dump/9DKB.bin
dd if=/dev/sda10 of=/home/duong/Desktop/dump/10MISC.bin
dd if=/dev/sda11 of=/home/duong/Desktop/dump/11LOGO.bin
dd if=/dev/sda12 of=/home/duong/Desktop/dump/12EXPDB.bin
dd if=/dev/sda13 of=/home/duong/Desktop/dump/13system.img status=progress
dd if=/dev/sda14 of=/home/duong/Desktop/dump/14cache.img status=progress
dd if=/dev/sda15 of=/home/duong/Desktop/dump/15userdata.img status=progress
I try mount system and edit them use comand :
Code:
[COLOR="red"]- make folder "system" to root path :[/COLOR]
cd /
mkdir system
[COLOR="red"]- mount system :[/COLOR]
mount -o loop /home/duong/Desktop/dump/13system.img /system
[COLOR="Red"]- mount system to rw for modify:[/COLOR]
mount -o remount,rw /system
[COLOR="Red"]- mount system to ro:[/COLOR]
mount -o remount,ro /system
i try modify something "put manual su, supolicy" to path /system/xbin symlink "daemonsu" to "su"
put "libsupol.so" to path "/system/lib64" and remount system ro, unmount system
I can write all partition to eMMC use command:
Code:
dd if=/home/duong/Desktop/dump/1PRO_INFO.bin of=/dev/sda1
dd if=/home/duong/Desktop/dump/2NVRAM.bin of=/dev/sda2
dd if=/home/duong/Desktop/dump/3TEE1.bin of=/dev/sda3
dd if=/home/duong/Desktop/dump/4TEE2.bin of=/dev/sda4
dd if=/home/duong/Desktop/dump/5lk.bin of=/dev/sda5
dd if=/home/duong/Desktop/dump/6boot.img of=/dev/sda6
dd if=/home/duong/Desktop/dump/7recovery.img of=/dev/sda7
dd if=/home/duong/Desktop/dump/8KB.bin of=/dev/sda8
dd if=/home/duong/Desktop/dump/9DKB.bin of=/dev/sda9
dd if=/home/duong/Desktop/dump/10MISC.bin of=/dev/sda10
dd if=/home/duong/Desktop/dump/11LOGO.bin of=/dev/sda11
dd if=/home/duong/Desktop/dump/12EXPDB.bin of=/dev/sda12
dd if=/home/duong/Desktop/dump/13system.img of=/dev/sda13 status=progress
dd if=/home/duong/Desktop/dump/14cache.img of=/dev/sda14 status=progress
dd if=/home/duong/Desktop/dump/15userdata.img of=/dev/sda15 status=progress
i solder eMMC to board but not root
I believe if your device has been root and your share all dump partition, i can downgrade Fire TV OS to old version and root it
What do you think about this?
Anyone can dump and share all file? (your device need root and running on old version OS)
I will try it. thank
Sorry my English
Resolve. I can downgrade my fire tv to OS version 5.2.1.0 and root it in here :
https://forum.xda-developers.com/fire-tv/development/share-hardware-downgrade-fire-tv-gen-2-t3817059