my phone is st21i, last night , i used cwm to format/system my phone , but now it stuck at the logo sony, somebody tell me how to reset it . please
enter in flash mode and reflash a firmware with flashtool
if you have recovery installed (like CWM) you can just flash the zip of the ROM you were using, as you said you could see the sony logo ,hence recovery would be accesible before that...
IF you DONT understand what i said above ..then better to download the stock ftf and flash it using flashtool :angel:....details here http://forum.xda-developers.com/showthread.php?t=920746
Answer - Little Brick
Hello! I have a solution !
Preparation
1. Download Flashtool
1.1 http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/2. Go to: C:\Flashtool\drivers (If you have install flashtool in the default directory)
2.1 Run Flashtool-Drivers
2.2 Select your phone. If you don’t know, Select all.
3. Dowload your FTF for your xperia phone
3.1 For Tipo, Tipo dual, miro and J:
3.2 Go in this page:
3.2.1 http://forum.xda-developers.com/showthread.php?t=2033401
3.2.2 Section “Stock Firmwares”
3.2.3 Select your phone.
Explication with flashtool.
4. Flashtool
4.1 Put your ftf file in directory: C:/flashtool/firewares
4.2 Run flashtool
4.2.1 Click on the lightning button (Flash)
4.2.2 Select Flashmod
4.2.3 Select your ftf file
4.2.4 Select "Exlure TA"
4.2.5 Click Ok
Put your phone in Flashmod:
5. FlashMod
5.1 Disconnected your phone from your computer
5.2 Put your phone off
5.3 Push 3s in vol - (for xperia tipo only, don’t know for oser xperia phone)
5.4 Plug your phone to your computer with pushing vol - button!
5.5 If it’s work, your led going to be green.
5.6 Now flashtool will be install your ftf file one your phone.
5.7 When it’s finished, you have to reboot.
5.8 And you are going to boot in your basic ROM !
Sorry for my bad English ^^
Thanks to ToledoJab
http://forum.xda-developers.com/showthread.php?t=1849170
Related
Hi friends,
i was very new to xperia devices,This is my friends phone. i just tried to in install cm 10 from fxp project, i unlocked the boot loader,installed custom recovery after installing update from sdcard (cm10 zip), Phone doesn't boots,not even showing sony logo. it just blings orange led.while entering fast boot mode also same thing happens,led just blings and then nothing hapens.i have downloaded stock ftf file and flash tool. i dont know what to do next to unbrick the device. can anyone guide me please.???
Battery percentage?
jaison thomas said:
Hi friends,
i was very new to xperia devices,This is my friends phone. i just tried to in install cm 10 from fxp project, i unlocked the boot loader,installed custom recovery after installing update from sdcard (cm10 zip), Phone doesn't boots,not even showing sony logo. it just blings orange led.while entering fast boot mode also same thing happens,led just blings and then nothing hapens.i have downloaded stock ftf file and flash tool. i dont know what to do next to unbrick the device. can anyone guide me please.???
Click to expand...
Click to collapse
while flashing,is your tipo's battery percentage is more than 50% to 60%?
first charge your battery.
what custom recovery?
you want to say custom kernel or fxp kernel or boot.img.
for cm10:
extract cm10.zip on pc
open flashtool
connect your device
flash button
fastboot mode
select kernel to flash
select boot.img(if you can't see boot.img in extracted folder then change type to *.img )
disconnect device after flashing kernel
when violet bar light will appear continuously press volume down button
flash cm10.zip
for stock:
copy downloaded ftf file to C:\Flashtool\firmwares
open flashtool
flash button
flashmode
select downloaded ftf file
flash
after connect your mobile screen connect your mobile in flashmode
after flashing remove device and start device(1 start take 4-5 min)
Greetings,
After deciding to install AVD Rom on my Rooted Xperia J with Locked Bootloader I was already at CWM Followed all the stepsI wiped the Cache the dalvik cache and the /systemwhen i Was at the part where you choose the ZIP file of the rom It said Error mounting the /sdcard/ I realized you need to put the rom in an external sd card. I pulled out the battery with CWM on to put the sd cardand when I opened it, it stays stuck at SONY Logo and I can't even open CWM anymore
I tried flashing Stock ICS With Xperia Flasher but it won't even connect to Flashmode and all it says is Device Connected with USB Debugging ofPlease help me guys I am so sorry for how I am so nooby at these stuff please help
Try to flash with another version of flashtool...or just repair via pc companion...
If all else fails,u will have to unlock bootloader and then flash a kernel
I have Xperia Flasher but it won't get detected and PC companion won't detect it too. Can you give me alink to the flashtool you were saying
Dude the one and only Xperia flasher is androxyde...just Google it and go to github...then there you'll see many versions of flashtool...try one after other..and have you installed fastboot and flashmode drivers if flashtool??
Thank me if I helped you...
Hello fonetalker 101,
I faced the exact same problem with my Xperia E, I got stuck in a bootloop, and began to panick. So I know what demons you are facing
You can try a few options:
1. As mathewsj114 says you can try an older version of flashtool. And make sure that you have the Flashtool and Fastbootdrivers installed!
2. Install Sony Update Service. You can download it here: http://www.sonymobile.com/global-en/tools/update-service/. Just install, run and select your phone model, then follow the instructions onscreen.
3. You said PC companion wasn't working? That's ashame!
4. If nothing works, try another computer!!! That's how I fixed my bootloop, my friend used Sony Update Service on his computer, and with him it worked! My personal experience is that SUS and Flashtool have some tiny bugs in Windows XP/Vista.
Hope I helped. Have a nice day and goodluck!
I was running AlienRom V4 with riches kernel on my xperia J for quite a long time, then one day the phone stop and went bootloops. I decided to flash a new rom so I downloaded Paranoid 3.0 for xperia J from here: http://forum.xda-developers.com/xperia-j-e/development/rom-t2220631 , wipe everything and flash and reboot from recovery.
Now my phone won't start, just the led turns on. I tried to flash a stock ftf, my phone connected to pc in flash mode with green led but I couldn't flash, it keeps saying "ERROR: Driver for this device must be installed" :crying: I tried to install the driver pack for xperia j from doomlord but it didn't work :crying:
What should I do ? Please help me, I have my phone unlocked bootloader and my pc is running win XP.
Thanks alot
Try This
XperiAwesome said:
I was running AlienRom V4 with riches kernel on my xperia J for quite a long time, then one day the phone stop and went bootloops. I decided to flash a new rom so I downloaded Paranoid 3.0 for xperia J from here: http://forum.xda-developers.com/xperia-j-e/development/rom-t2220631 , wipe everything and flash and reboot from recovery.
Now my phone won't start, just the led turns on. I tried to flash a stock ftf, my phone connected to pc in flash mode with green led but I couldn't flash, it keeps saying "ERROR: Driver for this device must be installed" :crying: I tried to install the driver pack for xperia j from doomlord but it didn't work :crying:
What should I do ? Please help me, I have my phone unlocked bootloader and my pc is running win XP.
Thanks alot
Click to expand...
Click to collapse
Try installing drivers from Flashtool\Drivers there you would find a file Flashtool-drivers.exe open it click next and then go till the bottom of the list and check fastboot and flashmode drivers and install that
Hope it works Cheers :good:
I need your great help.
My Xperia E3 (D2203) always stuck on Sony logo and can't power off after below step.
1. Upgrage to Kikat 4.4.4 --- OK
2. Unlock bootloader --- OK
3. Flash Kernel 4.4.2 --- OK
4. Open CWM and flash SuperSU --- OK
5. I choose the wrong instruction, Reboot to system. --- Stuck on Sony logo.
I have tried Sony PC Companion. It can detect my phone but it identify memory isn't enough after I excute update.
But I can't find any big files to delete via PC companion.
I also try flashtool to flash it again.
Flashtool can detect my phone but I don't know how to switch to flash mode.
I press volume - and plug USB cable to PC but flashtool don't work.
Please kindly help me to solve this problem.
Thanks.
Same problem exactly same problem
:crying::crying: please help me
Chevy1216 said:
I need your great help.
My Xperia E3 (D2203) always stuck on Sony logo and can't power off after below step.
1. Upgrage to Kikat 4.4.4 --- OK
2. Unlock bootloader --- OK
3. Flash Kernel 4.4.2 --- OK
4. Open CWM and flash SuperSU --- OK
5. I choose the wrong instruction, Reboot to system. --- Stuck on Sony logo.
I have tried Sony PC Companion. It can detect my phone but it identify memory isn't enough after I excute update.
But I can't find any big files to delete via PC companion.
I also try flashtool to flash it again.
Flashtool can detect my phone but I don't know how to switch to flash mode.
I press volume - and plug USB cable to PC but flashtool don't work.
Please kindly help me to solve this problem.
Thanks.
Click to expand...
Click to collapse
cherrywtz said:
:crying::crying: please help me
Click to expand...
Click to collapse
This problem has been solved.
Thanks for Vinay's help.
Hi Cherry.
Please follow Vinay's instruction as followings.
Open back of phone near sim card thare is small hole and off written on it.
Use a pen to press button inside hole. Your device will turn off.
Now connect usb press vol down.
Device Connected in FlashMode.
Now you can follow my guide to root after flashing cwm and power off.
(flash stock kernel from ftf of 4.4.4 kitkat)
(firmware 18.5.C.0.19 is 4.4.4 kitkat)
thanks
will try now
Chevy1216 said:
This problem has been solved.
Thanks for Vinay's help.
Hi Cherry.
Please follow Vinay's instruction as followings.
Open back of phone near sim card thare is small hole and off written on it.
Use a pen to press button inside hole. Your device will turn off.
Now connect usb press vol down.
Device Connected in FlashMode.
Now you can follow my guide to root after flashing cwm and power off.
(flash stock kernel from ftf of 4.4.4 kitkat)
(firmware 18.5.C.0.19 is 4.4.4 kitkat)
Click to expand...
Click to collapse
Hi
I have the same problem and allot of frustration.....
Where do I find?:
"Now you can follow my guide to root after flashing cwm and power off."
Best regards
/Lazarov
MrLazarov said:
Hi
I have the same problem and allot of frustration.....
Where do I find?:
"Now you can follow my guide to root after flashing cwm and power off."
Best regards
/Lazarov
Click to expand...
Click to collapse
guide is updated now no one get this problem any more.
they are saying to follow this guide
http://forum.xda-developers.com/xperia-e3/general/simplified-guide-to-root-sony-xperia-e3-t3012248
I have Xperia M2 and it is stuck on android logo. I can not even go to boot menu with Vol+Power keys.
Can i flash new rom with the phone closed like flashtool on mediatek phones?
Thank you.
@andrikop Yes you have to Download the Flashtool and the right FTF File for your M2 (Which one do you have?) After this your Phone should be working again.
Ok i found the way thanks.