Hello! I have a little trouble - I have killed phone (Haipai N9000) with FW e1809c_v75_gq1008_5647_6628.
Now, I can't to find this FW - it has build date 2012-12-19.
Full information about my device:
- native FW - e1809c_v75_gq1008_5647_6628
- Build Time: 2012-12-19
- UBoot ver:2010.06
- Kernel: 3.0.13
- Android ver: 4.0.4
- SW Ver: ALPS.ICS2.MP.V1.5
- Camera
- - Main: ov5647_raw
-- Sub: hi704_yuv
-- Lcm - RX_50NT_415B
- Touch Panel: FT5406
Other FW is working with some moments:
- both cameras doesn't work.
- wi-fi, bluetooh, GPS - doesn't work too.
If anyone has ideas I will glad to hear it.
Thank you!
Related
Hi, I bought a Chinese made Galaxy Note II A9300, and have been using for 1 weeks, so I need help from forumers to provide guidence or instruction to Root this device so I can remove some of the unwanted apps/games stored in the system. I have searched through many Chinese websites and tried many Root apps, so far no luck.
Basically the phone comes with specs as below:
- Phone Model : A9300
- Model number : e1108_v73_jbl1a535
- Brand : Yusu
- Android version : 2.3.6
- Baseband version : MAUI.11AMD.W11.37.SP.V17.F1, 2012/03/20 18:09
- Kernel version : 2.6.35.7 fri aug 24 18:34:02 CST 2012
- Build number : ALPS.GB.FDD2.MP.V4.5
- Custom Built Version : 1345804463
- CPU MTK 6573 512 rom 512 ram
You help is very much appreciated.
Thank you.
Were you able to do a full backup of your phone? To root this phone you first need a full backup. After doing the backup we can test with the way I rooted mine.
I need help too
myphoneuser said:
Were you able to do a full backup of your phone? To root this phone you first need a full backup. After doing the backup we can test with the way I rooted mine.
Click to expand...
Click to collapse
I need help to root this phone
I've tried several programs and got no success.
my device is
- Phone Model : A9300
- Model number : e1108_v73_jbl1a535
- Brand : Yusu
- Android version : 2.3.6
- Baseband version : MAUI.11AMD.W11.37.SP.V17.F1, 2012/03/20 18:09
- Kernel version : 2.6.35.7 fri aug 24 18:34:02 CST 2012
- Build number : ALPS.GB.FDD2.MP.V4.5
- Custom Built Version : 1345804463
- CPU MTK 6573 512 rom 512 ram
:good:
If possible help me
thank you
I have a solution for you
rubemfloriani said:
Hi, I bought a Chinese made Galaxy Note II A9300, and have been using for 1 weeks, so I need help from forumers to provide guidence or instruction to Root this device so I can remove some of the unwanted apps/games stored in the system. I have searched through many Chinese websites and tried many Root apps, so far no luck.
Basically the phone comes with specs as below:
- Phone Model : A9300
- Model number : e1108_v73_jbl1a535
- Brand : Yusu
- Android version : 2.3.6
- Baseband version : MAUI.11AMD.W11.37.SP.V17.F1, 2012/03/20 18:09
- Kernel version : 2.6.35.7 fri aug 24 18:34:02 CST 2012
- Build number : ALPS.GB.FDD2.MP.V4.5
- Custom Built Version : 1345804463
- CPU MTK 6573 512 rom 512 ram
You help is very much appreciated.
Thank you.
Click to expand...
Click to collapse
I have the same,
Is there's a similar Firmware that can fit to Royqueen Dual Cam 7inch Tablet
Well the problem starts when I install uberdroid after that the touch screen is not working anymore... :crying:
Here is the specs of the device
Code:
Hardware : WMT
CPU: Via WM8850 Cortex A9 1.2 GHz
Model : T-763
Build number : JRO03H
Build date UTC : 20130131-073909
Android v : 4.1.1
Baseband v: -----
Kernel v : Kernel 0.09.00.00 (Feb 1 2013 - 17:20:38)
Thank You In Advance
laconix00 said:
Is there's a similar Firmware that can fit to Royqueen Dual Cam 7inch Tablet
Well the problem starts when I install uberdroid after that the touch screen is not working anymore... :crying:
Here is the specs of the device
Code:
Hardware : WMT
CPU: Via WM8850 Cortex A9 1.2 GHz
Model : T-763
Build number : JRO03H
Build date UTC : 20130131-073909
Android v : 4.1.1
Baseband v: -----
Kernel v : Kernel 0.09.00.00 (Feb 1 2013 - 17:20:38)
Thank You In Advance
Click to expand...
Click to collapse
I flashed mine with CUDroid, the only problem is that the front camera is not working.
WIN8_8850DC_CUDROID_V12 1.5.0_1
History: Client broke the touch panel, replaced it with other capacitive panel, cudroid works fine except for the camera with flash.
gl3nborj said:
I flashed mine with CUDroid, the only problem is that the front camera is not working.
WIN8_8850DC_CUDROID_V12 1.5.0_1
History: Client broke the touch panel, replaced it with other capacitive panel, cudroid works fine except for the camera with flash.
Click to expand...
Click to collapse
you can modify the sensor or camera using fmaker
fmaker is found inside the config folder.
mine was also Royqueen which has board Id w70 v13 i flash it using uberoid , but the touch not working.
Can you help me guys how to fix this
@gl3nborj can you give me a link for WIN8_8850DC_CUDROID_V12 1.5.0_1 i will try it to my device if this will work.
i need firmware original ...the phone yusu ...
- Phone Model : A9300
- Model number : e1108_v73_jbl1a535
- Brand : Yusu
- Android version : 2.3.6
- Baseband version : MAUI.11AMD.W11.37.SP.V17.F1, 2012/03/20 18:09
- Kernel version : 2.6.35.7 fri aug 24 18:34:02 CST 2012
- Build number : ALPS.GB.FDD2.MP.V4.5
- Custom Built Version : 1345804463
- CPU MTK 6573 512 rom 512 ram
turns on with blank screen help mi please :crying:
great forum!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:laugh:
Improve title
mila19 said:
i need firmware original ...the phone yusu ...
- Phone Model : A9300
- Model number : e1108_v73_jbl1a535
- Brand : Yusu
- Android version : 2.3.6
- Baseband version : MAUI.11AMD.W11.37.SP.V17.F1, 2012/03/20 18:09
- Kernel version : 2.6.35.7 fri aug 24 18:34:02 CST 2012
- Build number : ALPS.GB.FDD2.MP.V4.5
- Custom Built Version : 1345804463
- CPU MTK 6573 512 rom 512 ram
turns on with blank screen help mi please :crying:
great forum!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:laugh:
Click to expand...
Click to collapse
Hi new
You should put what you want in the title. Most people will just assume you are saying "hi" and may not read your post or help you with your issue.
michaelmantion said:
Hi new
You should put what you want in the title. Most people will just assume you are saying "hi" and may not read your post or help you with your issue.
Click to expand...
Click to collapse
TANKS
hi, I have a serious problem with galaxy that here are the details; - MODEL: SHV-E160K
- MANUFACTURER: samsung
- VERSION: 4.1.2> JELLYBEAN
- PRODUCT NAME: SHV-E160K
- DISPLAY ID: JZO54K.E160KKKJMB1.EROM.E160K [eRuiZhi.com] [Sdhjt.ORG] [J2]...
- BOARD: MSM8660_SURF
- PLATFORM: MSM8660
- BUILD ID: JZO54K
- BUILD VERSION: E160KKKJMB1
- PDA: E160KKKJMB1
- UDISK LABEL: E160KKKJMB1
- SERIAL NO. : 04E8_6860_eb561341
- IMEI: 359506041782635
- TYPE: GSM
the problem is that I do some writing a message or writing a text message. the keyboard does not appear and I receives a message telling me this; (Unable to establish communication with Google at the moment) as to help me. thank you
Hi,
You can ask about your issue in this dedicated help thread in your device section,
http://forum.xda-developers.com/showthread.php?t=1942008
Good luck!
Hi.
I need a complete ROM for the mixer mentioned in the title. Could someone help me?
Or help me how to "save" the ROM from an other working mixer.
TY and BR
details of mixer and softwares:
exdroid4.4.2_r2-a33-v2.1
- Software: mq16update.zip (APK V. 1.5.4B)
- Model number: DM20
- Processor type: QuadCore-A33
- Android version: 4.4.2
- Firware vesion: v1.2.2
- Kernel version: 3.4.39
[email protected]#13
Mon Mar 25 14:51:31 CST 2019
- Build number
astari-eng 4.4.2KVT49L 20190322 test-keys