Related
Hey Guys,
So yesterday I decided I wanted to root my HTC One X (Rogers Canada Unlocked) so I followed the tutorials and unlocked the bootloader and went to install CWM recovery. I flashed it via fastboot, then when I restarted into recovery I was in a bootloop saying that this is for development purposes only, and it just kept restarting. So I booted back in to fastboot mode and installed TWRP 3.0.0.0 but the touch controls didnt work, so I reflashed TWRP 3.0.0.1 and the recovery was accessible. I tried to flash a rom and it said it succeeded but it just keeps going into that bootloop and there is no sign of the old stock ROM on the device at all. So I decided today to relock the bootloader, clear the cache and find a Rogers RUU to flash back on the phone with ARUwizard. It fails to install because of a conflict with my bootloader (obviously because mine is 2.14.000) but there is nowhere on the world wide web that has an updated Rogers RUU to flash to my phone. The only good thing that came out of it, is it just stays on the HTC splash screen and doesn't have the red development purposes only writing. I need some help, thanks in advance. If there is anything I missed please let me know.
Phone: HTC One X (Rogers Canada Unlocked) Evita
Bootloader Relocked, S-ON, Hboot 2.14.000
Secondary: HTC Incredible S (Vigin Mobile Canada)
Bootloader Unlocked, S-OFF, C10 ROM
RUU I have found in the past to be more difficult than the root process. make sure drivers installed and usb plugged into the back of pc.
CMW probably corrupt your SD card btw.
Use twrp. And looks like you did everything right for your flashing process except "fastboot flash boot.img" you could probably get the rom you want working if you extract the boot.img and flash in adb.
Sent from my HOX w/CM10.1
The problem is that there is no Rogers RUU for the latest hboot (2.14) that the OP is on. For some reason (that I've never completely understood) Rogers firmwares often don't have corresponding RUUs ever released. And he can't use an old RUU, as it fails version check (you can't run an RUU for a firmware version and/or hboot older than what is on the phone). Maybe they will release a Rogers RUU for the firmware that goes with 2.14. But it wouldn't surprise me if they never do.
The TWRP versions mentioned in the OP look wrong. The newest TWRP version is 2.3.3.1, and is supposed to be compatible with 2.14 (although I think some are still having some troubles). I'd start there, by re-unlocking and installing the latest TWRP:
http://forum.xda-developers.com/showthread.php?t=1677447
DvineLord posted the recovery img in Post 432.
If the OTA file is a complete zip, with hboot, sbl images, etc. It can be used as an RUU, but it isn't an automated process. as long as you install TWRP, and then install a ROM/kernel, your phone will work again
jjswain, if you need to RUU, find the complete zip OTA package, and follow the steps here http://forum.xda-developers.com/showthread.php?t=1974272
The same can be done in windows, start at step 9
subarudroid said:
looks like you did everything right for your flashing process except "fastboot flash boot.img" you could probably get the rom you want working if you extract the boot.img and flash in adb.
Sent from my HOX w/CM10.1
Click to expand...
Click to collapse
I'm in the same boat as OP, I did that exactly as I've flashed boot.img separate before and that fixes things. Problem is that once I flash boot.img and then flash the .zip it came out of the rom boots to completion, but the touch screen won't work. I think the solution is just to wait until 2.14.0000 is supported by other roms.
veemodz823 said:
I'm in the same boat as OP, I did that exactly as I've flashed boot.img separate before and that fixes things. Problem is that once I flash boot.img and then flash the .zip it came out of the rom boots to completion, but the touch screen won't work. I think the solution is just to wait until 2.14.0000 is supported by other roms.
Click to expand...
Click to collapse
I also flashed the boot, did factory reset, cleared cache, and davlik, installed rom (5 different ones to be exact) and they all booted but no touch screen either :crying: Any other idea's to try? Glad it's not bricked...it's just pricked for now
jjswain said:
I also flashed the boot, did factory reset, cleared cache, and davlik, installed rom (5 different ones to be exact) and they all booted but no touch screen either :crying: Any other idea's to try? Glad it's not bricked...it's just pricked for now
Click to expand...
Click to collapse
You can downgrade your hboot if you can access recovery to push a broken partition 4, then flash an old hboot, and then edit your software info and downgrade.. if you aren't comfortable we can do this over team viewer if you would like.
This sounds very similar to the situation I'm in. People have said the reason why there is no touch is because of 3.17 blah blah blah. If you want to read up on where I'm at, here's the link. We're pretty much in the same boat bro.
http://forum.xda-developers.com/showthread.php?t=2102729
absolutelygrim said:
You can downgrade your hboot if you can access recovery to push a broken partition 4, then flash an old hboot, and then edit your software info and downgrade.. if you aren't comfortable we can do this over team viewer if you would like.
Click to expand...
Click to collapse
I'm not sure if it's the hboot version that's messing it up or if it's the softare 3.17 that we OTA. I'm sure if we were still on ICS then rooted we'd be fine, but because we did the JB update and then attempted root....I think that's the issue
jjswain said:
I'm not sure if it's the hboot version that's messing it up or if it's the softare 3.17 that we OTA. I'm sure if we were still on ICS then rooted we'd be fine, but because we did the JB update and then attempted root....I think that's the issue
Click to expand...
Click to collapse
You have to downgrade your hboot to ruu downgrade to get the old firmware
absolutelygrim said:
You have to downgrade your hboot to ruu downgrade to get the old firmware
Click to expand...
Click to collapse
I could use this rom correct? Its based on 3.17
http://forum.xda-developers.com/showthread.php?t=2075783
Installed that Rom, phone works perfect except for LTE
Sent from my HTC One XL using xda app-developers app
Works..just shows 4g, but speedtest proves its lte
Search for TWRP for the HTC One X Evita (the north American model of the HTC one x) and make sure that the version is 2.3.3.1.
Then install Viper XL by Team Venom.
When installing the rom wipe everything that TWRP will let you wipe, then mount the phone as USB storage put the ZIP file on the phone, and then flash it.
If that doesn't work I dunno what will.
---------- Post added at 06:28 PM ---------- Previous post was at 06:17 PM ----------
So first you need to flash TWRP for HTC One X evita, you are going to need version 2.3.3.1.
Boot into the new recovery and wipe everything, SD Card, System everything.
Then download Viper XL by Team Venom, go to the mount menu, make sure everything is unchecked, and mount the phone as USB storage and put the rom on the phone.
Flash the rom and you now have a working phone.
jjswain said:
Installed that Rom, phone works perfect except for LTE
Sent from my HTC One XL using xda app-developers app
Works..just shows 4g, but speedtest proves its lte
Click to expand...
Click to collapse
This depends on the network icon set that was flashed with the rom you chose. For some roms, the values are as follows:
E - Extended network
3G - 3G
H - 4G
4G - LTE
On other icon sets, the last one is replaced by LTE - LTE. Some roms will actually let you install/use different network icons, so you could always take a look into something like that.
^what he said ^ also you can go to dialer and *#*#info#*#* go to phone info and see what network your connected to.
Sent from my HOX w/CM10.1
I'm somewhat in the same position as the OP, but every RUU or rom I try fails at signature check (although the latest one posted above seemed to work but then nothing at bootup). Being that I have stock CID ROGER001, and the same HBOOT 2.14 Evita, Radio .23a.32.09.29 and S-ON, is hoping a Rogers RUU is released my only option?
Well given my specs above I can confirm that the Hatka rom works (insofar as it has booted up and I have a phone again!!) Thank you so much for the link jjswain!!
you will only be able to downgrade if you s-off. i assume you are unlocked with twrp or the new cwm flashed if so as long as you wipe first you should be able to flash roms fine unless you are trying to flash non-evita roms for some reason. which roms have you tried flashing and what version of recovery are you using?
So... I had an awkward moment where I began looking at all the roms and seeing that they were all for a OneX not OneXL...:silly: Thanks for asking me to go through those as I probably would not have realized my mistake! Just flashed Viper3.2.6XL and I'm much happier with the look and feel.
I updated my One X Evita to jelly bean....I want to root my phone again. My last one x was on ICS and it was rooted but I got a new One X and now have Jelly Bean. My Hboot is 2.14. I been reading that people have been losing the touch screen? Has that problem been fixed with the new twrp2?
mcnaught82 said:
I updated my One X Evita to jelly bean....I want to root my phone again. My last one x was on ICS and it was rooted but I got a new One X and now have Jelly Bean. My Hboot is 2.14. I been reading that people have been losing the touch screen? Has that problem been fixed with the new twrp2?
Click to expand...
Click to collapse
You can't root now. There is no root method for jelly bean yet.
Sent from my Nexus 7 using Tapatalk HD
So I tried to root my phone awhile back and just ran out of time. Ive using the phone as is since but its time I finish what I started. Right now in the bootloader I have the 2 little bars on the top one saying tampered the other saying unlocked. It still says S-on(which where Im a little unsure of). I can boot into recovery without an issue from the bootloader. So i guess my question am i ready to install a custom rom or is there more i need to do before i do that?
Cbaird said:
So I tried to root my phone awhile back and just ran out of time. Ive using the phone as is since but its time I finish what I started. Right now in the bootloader I have the 2 little bars on the top one saying tampered the other saying unlocked. It still says S-on(which where Im a little unsure of). I can boot into recovery without an issue from the bootloader. So i guess my question am i ready to install a custom rom or is there more i need to do before i do that?
Click to expand...
Click to collapse
Yes, you can install an ROM you wish, but depending on hboot you may have to flash the boot.img in fastboot. There is an easy method of getting stuff in the original android development section of this phones forum, so do that and you won't have to work. Happy flashing
Original android dev section is lame. S-off your device, then flash CleanROM JB beta and ElementalX vanilla. You won't be disappointed.
Sent from my HTC One X using xda premium
S-OFF your device first this is all most noob proof just follow the instructions to the T. Then you wont have to flash the boot.img every time you flash a new rom in recovery, if you're on Hboot 1.14 and up. If you're on Hboot 2.14 I believe all 4.2 AOSP roms touch screens don't work, not sure though I know that cm10.1 doesn't for sure, but you can easily downgrade your Hboot to make it work after you've S-OFF'ed your phone or downgrade your touch panels firmware, again after your S-OFF .
S-OFF: http://forum.xda-developers.com/showthread.php?t=2155071
Downgrade HBOOT: http://forum.xda-developers.com/showthread.php?t=2156686 or http://forum.xda-developers.com/showthread.php?t=2156368
Downgrade touch panel: http://forum.xda-developers.com/showthread.php?t=2159863
ECEXCURSION said:
Original android dev section is lame. S-off your device, then flash CleanROM JB beta and ElementalX vanilla. You won't be disappointed.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Lame. Lol.
Its all a matter of opinion, in your opinion it is lame..
Android Dev section - anything not built from source (usually sense Roms)
Original Dev section - anything built from source (aosp based, such as cyanogenmod)
Sent from my Google Nexus 4
mirGantrophy said:
Lame. Lol.
Its all a matter of opinion, in your opinion it is lame..
Android Dev section - anything not built from source (usually sense Roms)
Original Dev section - anything built from source (aosp based, such as cyanogenmod)
Sent from my Google Nexus 4
Click to expand...
Click to collapse
Why aren't sense kernels in original development? I could be wrong but aren't they built from source
a box of kittens said:
Why aren't sense kernels in original development? I could be wrong but aren't they built from source
Click to expand...
Click to collapse
To prevent confusion
Sent from my Nexus 4 using xda app-developers app
Wubbz said:
S-OFF your device first this is all most noob proof just follow the instructions to the T. Then you wont have to flash the boot.img every time you flash a new rom in recovery, if you're on Hboot 1.14 and up. If you're on Hboot 2.14 I believe all 4.2 AOSP roms touch screens don't work, not sure though I know that cm10.1 doesn't for sure, but you can easily downgrade your Hboot to make it work after you've S-OFF'ed your phone or downgrade your touch panels firmware, again after your S-OFF .
S-OFF: http://forum.xda-developers.com/showthread.php?t=2155071
Downgrade HBOOT: http://forum.xda-developers.com/showthread.php?t=2156686 or http://forum.xda-developers.com/showthread.php?t=2156368
Downgrade touch panel: http://forum.xda-developers.com/showthread.php?t=2159863
Click to expand...
Click to collapse
I flashed a rom through recovery and had no issues with having to flash the boot.img.(but maybe that was done before and i just dont remember) I also just checked my Hboot and its at 1.11. So would you recommend i do this still or not?
Cbaird said:
I flashed a rom through recovery and had no issues with having to flash the boot.img.(but maybe that was done before and i just dont remember) I also just checked my Hboot and its at 1.11. So would you recommend i do this still or not?
Click to expand...
Click to collapse
Since your on a Hboot lower than 1.14 you shouldn't have to downgrade anything, Hboots or the touchscreen firmware, But I would still recommend doing the S-OFF still. If you do, read through the instruction before you start then give it a go. Once your device is S-OFF you can downgrade or upgrade to any Hboot or change to what ever Radio you wish and no more flashing boot.img on Hboots 1.14 and up.
TIP for S-OFF I was getting error 99 with cm10.1 so i had to backup and wipe my phone and goto Viper XL 3.2.3 and then restore my cm10.1 rom from trwp recovery, there is a post about this in the S-OFF thread it might be in the OP now not sure though.
Also if you move to a 4.2.X based rom from 4.1.X or lower you will probably need to upgrade your adb folder if you haven't made it with googles newest build
Feel like a noob posting this, but I've been trying to fix this problem for the past 24hrs with no luck.
This is the first HTC device I've rooted in nearly a year, and I have to say even though it's pretty, I'm really disliking the evita.
I rooted it using Hasoon's toolkit, and other than being unable to install twrp (or cwm), or getting s-off, it all went well. I just pushed twrp 2.5 to my phone and left s-on until the toolkit gets updated. (not sure how to do this using adb, it's been awhile. ) I have a working hboot, fastboot, and twrp install, and even usb mass storage is working from twrp.
Now, the horror begins. I downloaded team vipers jb rom, and it seemed that the flash went perfectly. But it went into a loop and it seemed to have really messed up the internal sd. Couln't mount it, twrp couldn't find it during my attempts to install other roms or even a factory ruu. I found nocturnals sd fix and that worked like magic, but now twrp will not install any other roms, and everytime I try to push a factory ruu I get a parsing error? On my first attempt at restoring a factory ruu, I forgot that my cid was "1111111" and the bootloader was unlocked so it would fail immediatly. But, even with s-on I managed to get my cid to CWS__001 (ATT's cid) and relocked the bootloader temporarily. But this still didn't change things. Don't know if it matters, but I used hasoons toolkit to push the ruu to my phone and it's during this I get parsing errors. Attempting to install a rom through twrp (CM10, a stock rooted rom, etc.) will immediatly fail also. It says "error executing updater binary in zip and something else that I'll post after trying a CM nightly install.
Update: CM Nightly hangs at the HTC splash screen :crying:
Sorry it's alot to read, but I'm feeling lost at this point...
Ayahuascaa said:
Feel like a noob posting this, but I've been trying to fix this problem for the past 24hrs with no luck.
This is the first HTC device I've rooted in nearly a year, and I have to say even though it's pretty, I'm really disliking the evita.
I rooted it using Hasoon's toolkit, and other than being unable to install twrp (or cwm), or getting s-off, it all went well. I just pushed twrp 2.5 to my phone and left s-on until the toolkit gets updated. (not sure how to do this using adb, it's been awhile. ) I have a working hboot, fastboot, and twrp install, and even usb mass storage is working from twrp.
Now, the horror begins. I downloaded team vipers jb rom, and it seemed that the flash went perfectly. But it went into a loop and it seemed to have really messed up the internal sd. Couln't mount it, twrp couldn't find it during my attempts to install other roms or even a factory ruu. I found nocturnals sd fix and that worked like magic, but now twrp will not install any other roms, and everytime I try to push a factory ruu I get a parsing error? On my first attempt at restoring a factory ruu, I forgot that my cid was "1111111" and the bootloader was unlocked so it would fail immediatly. But, even with s-on I managed to get my cid to CWS__001 (ATT's cid) and relocked the bootloader temporarily. But this still didn't change things. Don't know if it matters, but I used hasoons toolkit to push the ruu to my phone and it's during this I get parsing errors. Attempting to install a rom through twrp (CM10, a stock rooted rom, etc.) will immediatly fail also. It says "error executing updater binary in zip and something else that I'll post after trying a CM nightly install.
Update: CM Nightly hangs at the HTC splash screen :crying:
Sorry it's alot to read, but I'm feeling lost at this point...
Click to expand...
Click to collapse
I think that if you don't have S-OFF, you need to manually flash boot.img as well when installing a ROM. Also, I had issues flashing ROMs with TWRP 2.5. Try 2.3.3.1.
watameron said:
I think that if you don't have S-OFF, you need to manually flash boot.img as well when installing a ROM. Also, I had issues flashing ROMs with TWRP 2.5. Try 2.3.3.1.
Click to expand...
Click to collapse
Hmm... That could explain alot.
I'll try it and let you know what happens.
I have tried the 2.3.3.1 build of twrp, but for some reason the touchscreen doesn't work.
Ayahuascaa said:
Hmm... That could explain alot.
I'll try it and let you know what happens.
I have tried the 2.3.3.1 build of twrp, but for some reason the touchscreen doesn't work.
Click to expand...
Click to collapse
What HBOOT version do you have?
Did you install Viper or ViperXL? ViperXL is what you want for the EVITA.
redpoint73 said:
Did you install Viper or ViperXL? ViperXL is what you want for the EVITA.
Click to expand...
Click to collapse
ViperXL JB
and my hboot is 2.14
Ayahuascaa said:
ViperXL JB
and my hboot is 2.14
Click to expand...
Click to collapse
TWRP 2.3.3.1 should have a working touchscreen with hboot 2.14 are you sure you didn't try 2.3.3.0? that one requires you to downgrade touchscreen firmware first.
You need to fastboot flash boot boot.img where boot.img is extracted from the rom you're flashing if you're s-on and hboot >= 1.14.
If you have SuperCID, do not RUU without S-OFF or you really will have a paperweight.
exad said:
TWRP 2.3.3.1 should have a working touchscreen with hboot 2.14 are you sure you didn't try 2.3.3.0? that one requires you to downgrade touchscreen firmware first.
You need to fastboot flash boot boot.img where boot.img is extracted from the rom you're flashing if you're s-on and hboot >= 1.14.
If you have SuperCID, do not RUU without S-OFF or you really will have a paperweight.
Click to expand...
Click to collapse
Hmm.. I could have. I did it last night after two hours of frustration.
And I just did that to a new install of Nocturnal's rom, but with no luck. It still just hangs at the HTC dev warning screen. I'm going to try re downloading the ViperXL rom and hope I just had a bad copy..
heh. I did that without thinking last night and spent an hour trying to reverse the damage I did. Not only did I have s-on, but my cid was still "1111111".
./
Androidfilehost is only giving me ~50Kbps, so viper's rom has 3 hours left,
but Cleanrom is almost done.
Is there anyway to s-off the evita without booting into an os?
If not, can someone point me to a thread explaining how to manually s-off?
It seems that it's the cause for all this trouble I'm having and I've never had to do manually.
Thank you everyone for your help,
my phone still doesn't have a working os but I do feel like I'm getting somewhere.
Edit: How many of you have had problems installing roms with twrp 2.5.5.0? I'm thinking about trying 2.3.3.1. I thought this was what I flashed last night, but my touchscreen didn't work and according to exad's post I probably had the wrong one.
Use twrp 2.3.3.1 all versions above 2.4 have one issue or another.
You need a Rom installed and usb debugging turned on to s-off.
Here's the link: http://forum.xda-developers.com/showthread.php?t=2155071
Sent from my HTC One X using xda app-developers app
exad said:
Use twrp 2.3.3.1 all versions above 2.4 have one issue or another.
You need a Rom installed and usb debugging turned on to s-off.
Here's the link: http://forum.xda-developers.com/showthread.php?t=2155071
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks,
It seems that now 2.5.5.0 just skips the install and tells me that it was successful...
If so that would explain the hangups on the dev screen.
Ayahuascaa said:
Thanks,
It seems that now 2.5.5.0 just skips the install and tells me that it was successful...
If so that would explain the hangups on the dev screen.
Edit: Can you point me to a link for twrp 2.3.3.1? The only thread on xda for that build doesn't have working download links
Click to expand...
Click to collapse
http://goo.im/devs/OpenRecovery/evita/openrecovery-twrp-2.3.3.1-evita.img
Md5: d903047e6e871acb8f99834c30eb8307
Sent from my HTC One X using xda app-developers app
exad said:
http://goo.im/devs/OpenRecovery/evita/openrecovery-twrp-2.3.3.1-evita.img
Md5: d903047e6e871acb8f99834c30eb8307
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
CleanRom boots!
Thanks again to everyone who helped and exad for the 2.3.3.1 link,
I have a European One S (S4) with Hboot 2.15. Unlocked via htcdev. I cant figure out how to get s-off. Writing supercid doesnt work.. How to fix it?
S1pk3 said:
I have a European One S (S4) with Hboot 2.15. Unlocked via htcdev. I cant figure out how to get s-off. Writing supercid doesnt work.. How to fix it?
Click to expand...
Click to collapse
Moonshine
http://forum.xda-developers.com/showthread.php?t=2325590
If you aren't on the supported firmware it won't work. So, if that doesn't work for you then I would just leave it S-on. It isn't hard to fastboot flash a boot.img before flashing a rom in recovery.
Ok, thanks for your reply. I want to flash cm 10.2. That should be possible without s-off?
Sent from my HTC One S using xda app-developers app
S1pk3 said:
Ok, thanks for your reply. I want to flash cm 10.2. That should be possible without s-off?
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Yeah. It is just recommended that you are s-off.
As the guy said before you need to flash boot.img (the kernel) afterwards.
Sent from my One S using xda app-developers app
Will give it a try. Thanks.
Sent from my HTC One S using xda app-developers app
Stuck while flashing firmware in htc one s
I got stuck while installing htc one s with maximus hd..
http://forum.xda-developers.com/showthread.php?t=2445392&highlight=sense+5
I did till fastboot flash recovery TWRP2.6.1.0.img ...but aftr fast boot reboot it dint take memory...without that i cant copy ROM to memory...i did unlock bootloader not s off.... i got an error99 while flashing firmware.. icant on the device now....please help me...
tivofool said:
Moonshine
http://forum.xda-developers.com/showthread.php?t=2325590
If you aren't on the supported firmware it won't work. So, if that doesn't work for you then I would just leave it S-on. It isn't hard to fastboot flash a boot.img before flashing a rom in recovery.
Click to expand...
Click to collapse
I just noticed this thread.
I also have a similar problem. I cannot achieve s-off with my (S4) htc one s , running the exact same hboot as op.
To upgrade to jb 4.2.2 sense 5 which we should be getting for which we now won't despite them making the update.
Will we be able to upgrade to this new patch with s-on using the flash boot?
sylvantino said:
I just noticed this thread.
I also have a similar problem. I cannot achieve s-off with my (S4) htc one s , running the exact same hboot as op.
To upgrade to jb 4.2.2 sense 5 which we should be getting for which we now won't despite them making the update.
Will we be able to upgrade to this new patch with s-on using the flash boot?
Click to expand...
Click to collapse
Maximus HD --- No you need S-off for this. The firmware updates your Hboot, Radio, and you flash a different recovery and finally Rom
You might check out other Rom's that have Sense 5 4.2.2 features. They do not require S-off like Maximus does.
Hi thanks for your reply.
Do you know of any such roms that don't require the s-off?
I installed odyssey, its got no google playstore..suddenly my computer no longer recognizes my sd card / phone.
I tried adb push, managed to get a stock orang001 tmobile uk package to the root folder, but when i turn off the mount, it says its bad..which is a little odd.
Seems thought I got odyssey installed / flashed etc, its so bare as its practically useless to me unless i have google, plus its got weird glitches on boot up, taking forever, always booting into the developers screen etc.
sylvantino said:
Hi thanks for your reply.
Do you know of any such roms that don't require the s-off?
I installed odyssey, its got no google playstore..suddenly my computer no longer recognizes my sd card / phone.
I tried adb push, managed to get a stock orang001 tmobile uk package to the root folder, but when i turn off the mount, it says its bad..which is a little odd.
Seems thought I got odyssey installed / flashed etc, its so bare as its practically useless to me unless i have google, plus its got weird glitches on boot up, taking forever, always booting into the developers screen etc.
Click to expand...
Click to collapse
With Odyssey you have to flash slim gapps after you install the rom.
Your Sd card (partition) may be corrupted, the way to fix that is to put the stock recovery back on your phone then go to bootloader and "clear storage"
All of the other Roms don't require S-off, MagioRom is being actively developed with the sense 5 and 4.2.2.
tivofool said:
With Odyssey you have to flash slim gapps after you install the rom.
Your Sd card (partition) may be corrupted, the way to fix that is to put the stock recovery back on your phone then go to bootloader and "clear storage"
All of the other Roms don't require S-off, MagioRom is being actively developed with the sense 5 and 4.2.2.
Click to expand...
Click to collapse
thanks for the information. i read through magiorom thread. trying to download now.seems a flaky webhost
tivofool said:
Moonshine
http://forum.xda-developers.com/showthread.php?t=2325590
If you aren't on the supported firmware it won't work. So, if that doesn't work for you then I would just leave it S-on. It isn't hard to fastboot flash a boot.img before flashing a rom in recovery.
Click to expand...
Click to collapse
Hi would moonshine work for hboot 2.16 ?
cyberusman said:
Hi would moonshine work for hboot 2.16 ?
Click to expand...
Click to collapse
No, it is hard enough to get it to work on the supported firmware. (I would love to be proven wrong, for the handful of people that need this)
tivofool said:
No, it is hard enough to get it to work on the supported firmware. (I would love to be proven wrong, for the handful of people that need this)
Click to expand...
Click to collapse
Well i have hboot 2.16 and i need to s-off i get this error when trying to flash the ruu its error 99 unknown fail i get it twice
tivofool said:
Maximus HD --- No you need S-off for this. The firmware updates your Hboot, Radio, and you flash a different recovery and finally Rom
You might check out other Rom's that have Sense 5 4.2.2 features. They do not require S-off like Maximus does.
Click to expand...
Click to collapse
I was able to load Maximus HD ROM with S-On but only issue I had was wireless.
santo_2k said:
I was able to load Maximus HD ROM with S-On but only issue I had was wireless.
Click to expand...
Click to collapse
Please tell me how did you manage to install MaximusHD ROM without S-off!
I'm a little scared since I read they have a lot of problems while installing this ROM.
I'm using CM10.1 right now, but I would like to have sense 5 on my HTC One S.
I have unlocked boot loader and TWRP recovery.
I read there are other ROMS with sense 5 like MagioRom, which doesn't require S-Off (As far as I know)
Is there a great difference between MagioRom and MaxiumusHD? All I want is Sense 5 on my phone without all the terrible of S-offing!!
Sent from my One S using xda app-developers app
rolo143 said:
Please tell me how did you manage to install MaximusHD ROM without S-off!
I'm a little scared since I read they have a lot of problems while installing this ROM.
I'm using CM10.1 right now, but I would like to have sense 5 on my HTC One S.
I have unlocked boot loader and TWRP recovery.
I read there are other ROMS with sense 5 like MagioRom, which doesn't require S-Off (As far as I know)
Is there a great difference between MagioRom and MaxiumusHD? All I want is Sense 5 on my phone without all the terrible of S-offing!!
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
I tried Maximus with CWM, did i using sideload and them flash the boot.img file. but it was a disaster as my device didn't connect to wifi and had some call drops then I tried flashing twrp and then sideloaded magicrom 4.0 and flas boot.img, it looks lot better now but only issue right now is my phone keeps on rebooting and am still waiting for a stable rom to be released.
I read MagioRom comments and they say with that ROM phone reboots a lot. So I think the only way is with MaximusHD. The WiFi problem I think it can be fixed. I don't know about the call drops, but many have this ROM as daily use so I guess it's ok. I will try S-off with moonshine method, then try install Maximus. Hope my phone survives.
Sent from my One S using xda app-developers app
Hi, i had a S4 which got a broken screen and costs too much to fix a the moment so i brought a Telstra HTC ONE XL off a friend for $100.
I do like the phone but was over the 4.2.1 software as used to the 4.3 on the S4 which i rooted and put on CM10.
I tried with this phone to put on the nightly cm 10.3 but i hit a problem ,when install the nightlies it boot loops and when i try install the stable 10.1 it fails with an error which i do belive is to do with my V2 hboot.
I downloaded the RRU which is supposted to update the hboot to v3 then i can install cm10.3 (aparently) but when i run the rru it fails saying not for my phone.
RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial
I have unlocked through htcdev and rooted it ok.
Im stuck now though as i pressed backup current original rom which turns out its not.
The phone details are
CID TELST001
Model: HTC ONE XL TELSTRA
If someone can tell where to either find the newest telstra rru for my phone or how to update my hboot so i can use cm10?
My phone is pretty useless at the moment
stueee said:
I downloaded the RRU which is supposted to update the hboot to v3 then i can install cm10.3 (aparently) but when i run the rru it fails saying not for my phone.
Click to expand...
Click to collapse
Where are you getting CM from (link it) and what is the file named? CM will typically have the phone's code name (EVITA) in the file name. If the code name ENDEAVORU is in the file name, it is in fact for the wrong device, as the ENDEAVORU is for the quad core Tegra3 (non-LTE) version, which is completely different hardware.
Also, I don't know if 10.3 is even released yet for our device, or for the ENDEAVORU for that matter. I think you might be confused about what you are flashing. So again, link what you are trying to install.
The reason you couldn't run that RUU is because the CID check wouldn't allow it, it's looking for an at&t CID which you don't have. Getting s-off disables the security check which would let you run any Evita RUU but you need to get a ROM to boot first before you try that. You also need SuperCID.
Your best bet is probably to flash an older Sense ROM (4.0 or 4.1), then you can at least boot, and get SuperCID and s-off so you can run the 3.18 RUU to meet the requirements for the latest cm ROMs.
Sent from my Evita
timmaaa said:
The reason you couldn't run that RUU is because the CID check wouldn't allow it, it's looking for an at&t CID which you don't have.
Click to expand...
Click to collapse
For some reason, I got confused and thought the OP was saying that the ROM install was failing. But it clearly says the RUU (or "rru" anyway) failed.
But yes, you can only run an RUU for your carrier version. So you will need s-off to run the AT&T RUU (the RUU referenced in the OP).
But still confused about the mention of CM10.3. From what I can see, it doesn't exist for either our EVITA, or the ENDEAVORU.
Maybe he meant cm10.2 and it was a typo?
Sent from my Evita
timmaaa said:
Maybe he meant cm10.2 and it was a typo?
Click to expand...
Click to collapse
Could be. Although if so, its a type that appears twice.
It seems fairly common for folks to try to install the wrong CM (wrong device). So I want to make sure the OP isn't doing that.
redpoint73 - the CM i downloaded and installed was from http://get.cm/?device=evita and i tried
cm-10.2-20131030-NIGHTLY-evita.zip which installed but bootloops
and then i tried the stable - cm-10.1.3-evita.zip which gave me the failed error.
stueee said:
redpoint73 - the CM i downloaded and installed was from http://get.cm/?device=evita and i tried
cm-10.2-20131030-NIGHTLY-evita.zip which installed but bootloops
and then i tried the stable - cm-10.1.3-evita.zip which gave me the failed error.
Click to expand...
Click to collapse
Okay, neither of those are CM10.3, as stated in your first post. Please post accurate information to prevent form confusing those that are trying to help.
What hboot are you currently on? Its listed on the bootloader screen.
What version of TWRP?
You should be able to mount SD in TWRP, put a Sense ROM on the phone, and get back up and running.
Hi Red,
Sorry i typed out that post at almost 1am after pulling my hair out over a few hours and got a little confused.
My hboot is 2.15 and twrp is 2.6.3.0 which I believe is the latest.
What sense rom would work on mine as i really need this working now as i cant find a rom to suit anywhere with my lesser expertees.
I tried changing the cid using the super cid Telstra bat file but it won't recognize the phone as its not loaded, i tried in off state, bootloader, fastboot and twrp but is just keeps saying cant find phone.
I also tried the hex editor method but it didnt seem to update the CID after i completed it without errors.
thanks for you help.
redpoint73 said:
Okay, neither of those are CM10.3, as stated in your first post. Please post accurate information to prevent form confusing those that are trying to help.
What hboot are you currently on? Its listed on the bootloader screen.
What version of TWRP?
You should be able to mount SD in TWRP, put a Sense ROM on the phone, and get back up and running.
Click to expand...
Click to collapse
With 2.15 hboot, you cannot modify the files required for supercid.
You can try the ever so risky jet tool. But this tool deliberately bricks to downgrade your hboot.
Sent from my HTC One XL using xda app-developers app
Any recent Sense ROM will suit your current setup, have a look here and you'll find a whole bunch. Unfortunately for you the 2.15 hboot has write protection enabled so there's no way you can get SuperCID (abd therefore can't get s-off), at least not until an exploit is released.
When you tried to flash CM did you also flash the boot.img via fastboot afterwards? You're s-on so that's necessary to get it to boot. Phones on a higher hboot like yours are unable to flash the boot.img through recovery so it must be done manually.
All you do is retrieve the boot.img from the root of the ROM zip, put it in your fastboot folder on your PC, and after you've flashed the ROM in recovery you reboot to bootloader, connect the phone to the PC, open a command prompt from within your fastboot folder (shift + right click anywhere in the folder then select open command prompt here), then give the following command:
fastboot flash boot boot.img
Once that's done you can reboot the phone and it should boot into the ROM.
Sent from my Evita
stueee said:
My hboot is 2.15
Click to expand...
Click to collapse
That's pretty important. This is the reason why the older CM10.1 failed to install. CM was having issues with older hboots, so a script was added to require hboot 2.14.
Once hboot 2.15 came along, folks found that CM failed to install since the install script explicitly requires 2.14. Later versions include hboot 2.15 in the install script.
As exad and timmaaa mention, SuperCID (and therefore s-off) are not possible on hboot 2.15. So you are stuck with s-on (assuming that is what you are on now). It also means you can't currently run any RUU. Reason being, with s-on you can't run older RUUs, RUUs from another carrier, and there are no RUUs based on hboot 2.15. No "current" RUU exists (for your hboot), you can't run "previous" RUUs with the S-on restriction. So therefore you can't currently run any RUU.
But hboot 2.15 will work with newer versions of CM (and other AOSP ROMs which have been recently updated) as well as any Sense ROMs. But with s-on, you need to extract boot.img and flash manually with fastboot every time you install a ROM (as timmaaa points out). If you did not do this, this is why flashing the recent CM10.2 nightly resulted in a bootloop. Failure to falsh boot.img is the most common reason for bootloop after flashing a ROM.
stuck in bootloop
ive recently have been flashing different roms onto my htc one with no problem..then i decided to try the google play edition and realised i had to be s-off...now i have super cid 11111111 and s-off and was running skydagon 14.1 with no prob...today i did a nand backup and thought i would try the liquid rom then half way through the fresh install (i wiped cache and dalvik first)my phone shut down and boots up into a loop..if i go to recovery (twrp 2.6.3.3) it only stays in recovery a few seconds then goes back to the start of bootloop...i have tried cwmr also...i have otg cable and have used adb a few times however im not highly skilled so any help would be appreciated...apologies on the excessive post..
martin-m7 said:
ive recently have been flashing different roms onto my htc one with no problem..then i decided to try the google play edition and realised i had to be s-off...now i have super cid 11111111 and s-off and was running skydagon 14.1 with no prob...today i did a nand backup and thought i would try the liquid rom then half way through the fresh install (i wiped cache and dalvik first)my phone shut down and boots up into a loop..if i go to recovery (twrp 2.6.3.3) it only stays in recovery a few seconds then goes back to the start of bootloop...i have tried cwmr also...i have otg cable and have used adb a few times however im not highly skilled so any help would be appreciated...apologies on the excessive post..
Click to expand...
Click to collapse
You're in the wrong forum, buddy. This is the HTC One XL forum.